How to view the payload of a Message if it processed through AAE

Hi All,
Can anybody please tell me how to view the payload if the message processed through Advance Adapter Engine.
I have developed a SOAP to SOAP interface by using Advance Adapter Engine and it is working fine I can see the messages in Runtime Work Bench(RWB) but when I clicked on the Sender and Receiver Adapter I can't see the payload so I am wondering if anyone knows how to view the payload or it is possible to view the payload if the message was processed through Advance Adapter Engine (AAE).
Is there any setting or properties available in NWA to enable or disable the payload of AAE?
Thanks,
Iqbal

Hi All,
Unfortunately I can only see the SOAP Document but no Payload.
here is what I can see
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
- <SOAP:Header xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
- <sap:Main xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3" versionMinor="0" soap:mustUnderstand="1">
<sap:MessageClass>ApplicationResponse</sap:MessageClass>
<sap:ProcessingMode>synchronous</sap:ProcessingMode>
<sap:MessageId>75e50f37-9bef-11e0-af98-000027d151a6</sap:MessageId>
<sap:RefToMessageId>7597008d-9bef-11e0-a027-000027d151a6</sap:RefToMessageId>
<sap:TimeSent>2011-06-21T10:15:59Z</sap:TimeSent>
- <sap:Sender>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty" />
<sap:Service>Srv_xxxxx__Sender_SOAP_AAE_BS</sap:Service>
</sap:Sender>
- <sap:Receiver>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty" />
<sap:Service>Srv_xxxxx_Sender_SOAP_AAE_BS</sap:Service>
</sap:Receiver>
<sap:Interface namespace="urn:xxxxxxxx.com:pi:A_TEST:HTTP_TO_SOAP_AAE">SI_OS_xxxx_Request_AAE</sap:Interface>
</sap:Main>
- <sap:ReliableMessaging xmlns:sap="http://sap.com/xi/XI/Message/30" soap:mustUnderstand="1">
<sap:QualityOfService>BestEffort</sap:QualityOfService>
</sap:ReliableMessaging>
<sap:System xmlns:sap="http://sap.com/xi/XI/Message/30" soap:mustUnderstand="1" />
- <sap:HopList xmlns:sap="http://sap.com/xi/XI/Message/30" soap:mustUnderstand="1">
- <sap:Hop timeStamp="2011-06-21T10:15:59Z" wasRead="false">
<sap:Engine type="AE">af.dgx.dbdgx66</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XIRA</sap:Adapter>
<sap:MessageId>75e50f37-9bef-11e0-af98-000027d151a6</sap:MessageId>
</sap:Hop>
</sap:HopList>
</SOAP:Header>
- <SOAP:Body xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
- <sap:Manifest xmlns:sap="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink">
- <sap:Payload xlink:type="simple" xlink:href="cid:payload-75e51c499bef11e0a13a000027d151a6atsap.com">
<sap:Name>maindocument</sap:Name>
<sap:Description>main document</sap:Description>
<sap:Type>Application</sap:Type>
</sap:Payload>
</sap:Manifest>
</SOAP:Body>
</SOAP:Envelope>
Do I need to do anything in NWA to enable the payload for Sender and Receiver?
Thanks,
Iqbal

Similar Messages

How to know the payload size of message

hi can anybody tell me how to know the payload size of message?
Message was edited by:
vvr murty

Hi,
To know the size of the input message , i hope we have one option , after copying the test payload from the SXMB_MONI into Message mapping test -- click on test
after come back to design tab in message mappign
click on left side root node and Press CTRL+SHIFT + mouse right click and click on trace -- you can see the size of the message payload.
In SXMB_MONI..
see the payload messges
also see the below link
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Regards
Chilla

How to view the Adressee in Sent Messages

I want to view all sent msgs(I have 3 accts) by date but also showing the "To" or "Addressee". I am using Mountain Lion and it just shows me "from" which doesn't help me when I'm looking for a specific email to a specific person. How do I set up the Sent folder to be viewed by date and showing who I sent it TO?
I'm sure this is probably an easy one but I'm nopt finding the option as I look throuogh "the usual places;)

First you have to be in Classic layout (with columns) if you're not already there. Mail Preferences - View - Use Classic Layout.
Then, right-click (or ctrl-click) on the header of the right-hand panel - in the same space where you see "From", "Subject", etc. You'll see options to add columns. Click the "To" column to add it, and any others you want. You can now sort by these columns if you wish by clicking on the column header.
Matt

How to view the java code of the message mapping,

Hi Experts,
<b>how to view the java code of the message mapping,</b>
how to get the background java code of the message mapping(graphical mapping).
And where to view it?

Hi sowmya,
Open any Message mapping in IR. Press <b>CtrlShift0(zero)</b> to open a new menu.
There you will find an option "Is Java Source Code Available?"
There will be an export button nearby. Use it to get the code.
Open it in a zip , you will see the hide java code.
The JAVA code for graphical msg mapping is in below folder:
\usr\sap\<SID>\<DVEBMGS10>\j2ee\cluster\server0\temp\classpath_resolver
Here all the mapping jars are there in this folder.
Just decompile these jars and you can see the code.

When I get messages from Barnes and Noble, the text is blank. If I hit reply or forward, I can then see the content. This only happens with Barnes and Noble. Any suggestions on how to view the content?

When I get messages from Barnes and Noble, the text is blank. If I hit reply or forward, I can then see the content. This only happens with Barnes and Noble. Any suggestions on how to view the content?

I'm sorry, but your sister, unless she had already turned on the "Find my iPhone" feature and the person who took the phone has not disabled it, is out of luck. She should report the theft to local police authorities, including the serial number of her iPhone. While her experience is unfortunate, there are good reasons why Apple cannot do anything else about it.
I hope she gets her phone back.
Best of luck.

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

How to test the payload in XI

Hi all,
could please explain how to test the payload in xi and with steps.
Thanks in advance,
Radhika

Hi Radhika,
You can test in three ways.
1.) In message mapping directly give the relevant data and then execute. Here you can test whether the mapping is correct or not.
2.) In Integrstion Directory after completing and activating the Configuration, in tool you can find the Test Configuration tab. There you can give the sender and receiver details along with payload. Here you can test whether the Configuration is correct or not.
3.) In RWB in COmponent monitoring. Select the Integration Engine Monitoring. Here give the sender and receiver details, Interface name, name space, Quality of service.
Now give user name and pass word.
Paste the payload from massage mapping and then press test tab. Here yoyu can directly send the message from XI server to the receiver system.
Ok,
Jeevan

How to view the purchase order output

Hi all,
how to view the purchase order output in the transaction me23n?
How to obtain the purchase order output form?
Please help..

HI,
goto NACE tcode then select the purchase order type and go to output types u cna use standard one NEU and provide the sapcript name and form name default will be there with MEDRUCK and print program.
then in ME23n click on messages there create ur message type NEU and save it
then print the purchase order...
hope u get solved with this
Regards
Syed A

How to copy the payload from onMessage Activity in BPEL interface

Hi All,
how to copy the payload from onMessage Activity in BPEL interface when it is there at the starting of the process and when clicking on the OnMessage Activity
i'm able to see the View XML Document link. By Clicking on View XML Document Payload is getting opened for me but at this point i'm not able to copy the payload and more over the scroll bar is also not there.
When i'm saving it as .xml i'm able to see the payload but not in an xml format.
When trying the payload in SOAPUI it's not getting reformatted.
How can we solve the issue.
Regards,
CH

The input payload can be seen from "Audit Trail" tab and "Flow" tab of any BPEL instance. The XML shown in "Flow" tab are not rightly formatted XMLs and you may not able to copy them "as is" to a text editor. But, the XML shown in "Audit Trail" should be in the right XML format and you should be able to click on any audit trail entry and copy the XML payload to a text editor. soapUI should also be able to format such XMLs without any issue. Just make sure that you don't overwrite soap header/body section when pasting to soapUI request.

How to view the Syslog Application logs in CLI

On CallManager 6.1.x, how do we view the Application Logs in the Syslog Viewer using the CLI? I know how to view the traces but not the Application or System logs in CLI. My RTMT to a customer is being blocked so I need to use the CLI. Thanks.

Event Viewer-Application Log = /var/log/active/syslog/CiscoSyslog.*
Event Viewer-System Log = /var/log/active/syslog/messages.*
From CLI:
To list application logs:
file list activelog syslog/CiscoSyslog.* date detail
To list system logs:
file list activelog syslog/messages.* date detail
To view a specific application log:
file view activelog syslog/CiscoSyslog.1
To view a specific system log:
file view activelog syslog/messages.1
http://htluo.blogspot.com
Michael

How to View the Loaded Data

Hi,
I have loaded the data into an ODS from an External Flat file and executed the job. Can anyone guide me how to view the loaded data in the ODS ?
Thanks

Hi Madhu,
You can simply Goto Transaction LISTCUBE and give the ODS name -> Execute.
Regards
Hemant

How to view the Users in the Portal Activity Report

Hello,
Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name?
Please explain me in detail how to view the Report.
Thnx in Advance
cheers,
Murali

hi,
You can certainly do it for hourly basis but i am not sure whether it could be done quarter an hour basis. Also The portal nodes within a cluster can be in different time zones, yet the activity data from all nodes are aggregated together and reported together. To enable the reporting of hourly data from different time zones, portal activity reports display hourly data based on the GMT time zone.
Do see the documentation
http://help.sap.com/saphelp_nw04/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
Weblog :Portal SP9: Portal Activity Report
Regards,
Ganesh N

How to View the Scheduler in ODI Console

Hi
In ODI Studio, we may Schedule a Scenario and also, we may view all Schedules process from the Agents (View Schedule option).
My colleagues are going to use ODI Console, but we cannot find out HOW to View the Schedule in ODI Console.
In Oracle documentation about FDMEE, we can read the following: If you want to cancel a specific instance of a schedule, use the ODI Studio or ODI Console... see the PDF document in attachment.
Regards
Claude

To display the schedule for one agent:
In Topology Navigator expand the Agents node in the Physical Architecture accordion.
Select the Physical Agent you want to update the schedule.
Right-click and select View Schedule.
The Schedule Editor appears, displaying the schedule for this agent.
Check: http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/running_executions.htm#ODIDG634
HTH -
Jasmine

HOw to view the records in a structure qaqee ?

hi every one ,
we can view the tble through SE16
HOw to view the records in a structure qaqee ?
Thanks in advance

Hello,
Please check the link
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/90/8d7301b1af11d194f600a0c929b3c3/content.htm
You can view the struture in SE11 t-code for its components.
Regards,
Shailesh

How to view the source code for Native Method

hi
i am using some native methods in to my code ;
can anybody tell me how to view the source code for the same ;
nik

Buy/acquire a C/C++/assembly code disassembler and run the shared library through it.

How to view the payload of a Message if it processed through AAE

Similar Messages

Maybe you are looking for