Virtual Machine in the Internet Explorer

Hi
I am using Internet Explorer version 6.0. I have a particular assignment where I want to stop the user from using the SUN VM in their browser. I want to them to use only the Microsoft VM enabled in their Internet Explorer. I am detecting the VM by using an applet because I read on the internet that it is not possible to detect a VM in the browser because the W3C DOM model does not support such methods.
Now my question is that when I have enabled both the SUN VM and the Microsoft VM in my browser, the SUN VM always get the preference over the Microsoft VM. I just need to understand why this thing happens?
Can anybody please help me out in knowing this?
Thanks
Raj

In IE under tools -> internet options -> advanced -> scroll half way down
there is something "use jre .... for <applet tag"
Uncheck this.
I cannot figure out why SUN has this as the default setting since the applet tag has been depreciated
and is likely used for msjvm applets, so the sun jre will try to run applets that it can't (com.ms packages).

Similar Messages

  • I need the internet explorer for my mini mac, is there any compatible to install?

    There is a program at work that i need to use the internet explorer to access, but the mini mac is not compatible.  Is there a way to intall a compatible Internet explorer into a Mini Mac

    There are two possibilities here:
    1)  The program needs windows AND it needs internet explorer in order to interface with the pieces of windows that it needs.  Normally a browser forms a application environment which stuff runs inside, and well-behaved applications will run pretty much in any browser on any operating system.  But microsoft has other things that they have put into Internet Explorer that allow you to go THROUGH the browser and into the windows operating system below it.
    2)  The program has only been tested in Internet Explorer on Windows, and so that's all anyone will vouch for, but it will run just fine in other browsers and other operating systems.
    If it is situation #1, then the only way to run the application is to run windows AND IE.  This can be done on another computer running windows, by creating a BootCamp partition and buying and installing windows on it, or by buying and installing vmware or parallels and buying and installing a windows virtual machine on it.
    If it is situation #2, what is necessary is experimentation.  Try to load the application url in various and sundry browsers and various and sundry versions of those browsers on your mac.  If you find a configuration that works, you can then lord it over the ignorant people who told you that it requires I.E.
    Just a note if it DOES really require windows and I.E., which is that it may require some particular version or versions of windows and/or I.E.  In our case, the Crystal Reports ActiveX Viewer will not load in windows 7 if running in a non-Administrator account.  And our bank's online banking software won't run on I.E. 9 or 10.  (I've got to watch windows update like a hawk to untick the I.E. 9 update.)

  • Windows failed to apply the Internet Explorer Zonemapping settings - the data was invald (event ID: 1085)

    Hi All,
    I have a large domain and a long list of websites that are trusted using the following group policy setting:
    Administrative Templates > Windows Components > Internet Explorer> Internet Control Panel > Security Page >
    Site to Zone Assignment List
    On all (XP/vista/win7) workstations across the domain I'm getting the following error:
    Log Name:  System
    Source:  Microsoft-Windows-GroupPolicy
    Event ID: 1085
    Task Category: None
    Level: Warning
    Keywords:   Description: Windows failed to apply the Internet Explorer Zonemapping settings. Internet Explorer Zonemapping settings might have its own log file.
    There's nothing either side of this error in the log that shines any more light on the issue.
    I know which group policy object its applying these settings but cant find which of the entries in the site to zone assignment list is causing this issue. I looked in the
    Group Policy/Operational log but all I see is the following entry which says "completed" but is logged as an error:
    After some research I'm guessing that the issue is an incorrect wild-card. This is what my trusted sites list looks like (with names removed of course):
    http://servername.*  
    *.internaldomain.com.au  
    *.domain.com.au  
    *.domain.*  
    *.externaldomain.com  
    *.domain.inernaldomain.com.au  
    *.domain.*  
    *.domain/name.*  
    *.domain.inernaldomain.au*  
    *.domain.com
    Is there something obviously incorrect here?
    Does anyone know where I could find an article that clearly outlines the acceptable wildcard syntax for the
    "Security page\ site to zone assignment list" group policy?  Ive read every forum post, website and blog I could find on the internet but nothing is clear and I wasn't able to find an MS document that steps it out. I've also changed the
    existing list a number of times based on blog posts etc but had no luck.
    **Please Note**
    I dont want to change to a different method or have an intellectual debate re why I would have these sites/wildacrd/policy set. I'm really looking to see what entry is invalid and where the documentation is for this policy setting so i can make sure they are
    always correct in the future. 
    thanks in advance for your time and assistance
    Simone
    PS: I've already read the following posts a number of times:
    I get no data but have identified the GP that is causing the issue:
    A test case for troubleshooting group policy application – Event ID 1085 and 7016 - http://blogs.technet.com/b/askds/archive/2008/08/21/a-test-case-for-troubleshooting-group-policy-application-event-id-1085-and-7016.aspx 
    I dont have any 2 letter domain names:
    Problems Adding Top-Level Domains to Zone Sites List - http://support.microsoft.com/kb/259493
    I tried formatting the list per this article:
    [Solved] The Group Policy client-side extension Internet Explorer Zonemapping failed to execute  - http://daily-it.blogspot.com.au/2008/09/solved-group-policy-client-side.html
    Has no domain wildcard format info:
    Behavior of Site to Zone Assignment List  - http://blogcastrepository.com/blogs/mattbro/archive/2006/09/07/2183.aspx
    Great article, no wildcard data:
    Internet Explorer Policy Settings  - http://technet.microsoft.com/en-us/library/bb457144.aspx
    Internet zonemapping problem: http://social.technet.microsoft.com/Forums/en-US/winserverGP/thread/a8756a27-b562-42ad-8782-87d284e6bcfb/
    Spiceworks Event 1085 (Warning) - http://community.spiceworks.com/windows_event/show/1582-microsoft-windows-grouppolicy-1085
    Event ID 1085 — Application of Group Policy - http://technet.microsoft.com/en-us/library/cc727303%28v=ws.10%29.aspx
    Application of group policy - http://technet.microsoft.com/en-us/library/cc727312%28v=ws.10%29.aspx
    Evt ID 1085 GP client-side extension IE ZoneMapping failed to exec  - http://www.winvistatips.com/evt-id-1085-gp-client-side-extension-ie-zonemapping-failed-exec-t706399.html
    Event 1085 - Internet Explorer Zonemapping - http://www.minasi.com/forum/topic.asp?TOPIC_ID=29206
    EventID.net - http://www.eventid.net/display.asp?eventid=1085&eventno=1412&source=Userenv&phase=1
    Event ID 1085 - Internet Explorer Zonemapping failed to execute - http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/2003_Server/Q_24897522.html
    UPDATE:
    I disabled the original policy and created a new one with only one trusted site address in it. Then I logged into a clean test machine did some testing.What I found after a few hours of testing was; regardless of the site that I have listed in group policy
    The HKCU\Software\Policies\Microsoft\Current version\Internet Settings\Zone Map Key registry entry is
    always updated with that entry on the workstation. So the workstation's registry always updates the key with
    *.sitename.com per the site that I have set in GP
    If I run GPUPDATE /FORCE over and over again, on the same machine, under the same user account, using the same DC I get:
    Failure, Failure, Failure, Success, Success, Success, Failure etc
    I wasn't able to determine any pattern to the failures, I tried stopping some of the processes on that machine but didn't find anything that would make it fail/succeed reliably.
    There is no AV or firewalls installed on my test machine
    Anyone have any more ideas?  I think I might install filemon and try to capture some more data unless there's a better tool?

    Yes, and that's straight from my Microsoft TAM. As long as you include an asterisk inside those site-to-zone mappings, you'll continue to see them. The key is whether or not they're working. In my environment, I've seen complete success using the
    http://*.domain.com, or
    https://*.domain.com, no matter if the site is http://www.domain.com or
    http://milk.does.a.body.good.domain.com. Despite the success, we continue to see the errors. It's much the same as Group Policy Preferences where you can apply a setting once, or repeatedly. If you apply
    something repeatedly and it's already set, lookout for some complaints in the application log. It really is annoying. There's potential to play with the logging levels, but I'll admit that my experience ranks as "novice" in this specific section of group policy.
    This link might get the creative juices flowing:
    http://blogs.technet.com/b/askds/archive/2008/07/18/enabling-group-policy-preferences-debug-logging-using-the-rsat.aspx
    I see you've already read a number of articles including "a test case for troubleshooting those event IDs"... I sympathize with your efforts. I despise warnings and errors that I can't solve or don't want to see, but I've researched a number of them to death
    and found that many are simply "normal". Uggg... I hope this helps, but please take my advice, as with anyone else's out here, with caution. I've seen some crazy recommendations. I saw a recommendation to install SQL on a DHCP server to get failover clustering
    up and running. I hope the guy asking for help didn't listen to that one! : ) - josh

  • How to stop the information bar cmoing in the Internet Explorer with java

    hai all,
    iam new to this forum and posting a question on java application where i had a problem.
    I work in a software company. we have developed an application and it is in production and we had a small problem. we have deifferent kinds of reports te users can get dynamicalty based on theirn requet parameters. so when we are deployingthe application on server and accessing it from the client machine(bothe the server and client are diferent i mean different machines) they get an information bar that
    "To help protect your security, Internet Explorer blocked this site from downloading files to your computer. Click here for options". and for this we have given them the solutions for setting the security features for the
    Internet Explorer . but they want it to be done thru program such that they dont want to see that message. i need a small help for this.
    It would be very help ful for me in my carreer if i get a solution for this.

    I'm not 100% sure, but doesn't all applets have the same popup bar? I guess you can tell your customers to turn off their popup blocker beforehand. (This is what my uni does with WebCT Vista)

  • Enable Virtual Machine to Access Internet with ICS

    In order to experience Hyper-V, you may choose to use Hyper-V on a laptop, and it will likely come with an issue when you create an external virtual switch bounding to a wireless NIC due to
    hardware compatibility.
    For this reason and requirement, Internet Connection Sharing (ICS) may help us. ICS makes use of network address translation (NAT) mapping individual IP address of local computer (virtual machine)
    to unused port number in the TCP/IP stack of ICS host computer. For more information about ICS, please refer to the article here.
    Internet Connection Sharing (From Wikipedia)
    http://en.wikipedia.org/wiki/Internet_Connection_Sharing
    To achieve this in the Hyper-V environment, please follow the steps below:
    Demo configurations:
    Hyper-V Host: Windows Server 2012 R2
    IP address of the Wireless NIC: 192.168.0.100/24
    Virtual Machine (Windows Server 2012 R2): 192.168.1.100/24
    1. Create the Internal Virtual Switch (Figure 1).
    Figure 1: Create the Internal Virtual Switch
    2. Connect your virtual machine to the new virtual switch (Figure 2).
    Figure 2: Assign the Internal Virtual Switch to the VM
    3. Find the wireless NIC with internet access then share it with the Internal Virtual Switch (Figure 3).
    Figure 3: Share the wireless NIC
    4. Change the IP address of the Virtual Switch and assign the IP address as the Default Gateway for the Virtual Machine (Figure 4).
    Figure 4. IP configurations
    After that, your virtual machine can have the Internet access (Figure 5).
    Figure 5: Access the Internet
    Note: ICS provides the DHCP service by default. After sharing wireless NIC, the Virtual Switch will get an IP address automatically (192.168.137.1). If DHCP is enabled in your VM, it will get
    an IP address within the same subnet from ICS host computer, also the Gateway and DNS.
    Keyword: Hyper-V, Virtual Switch, Wireless NIC, Internet Access
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    While this was a requirement with earlier versions of HYPER-V there is only one scenario where this would be required, and that is when your VMs MUST share the same IP address as the management OS.
    That is the only scenario where 'sharing' of a connection would be required. 
    Since Client Hyper-V has been introduced with Windows 8 / Server 2012, wireless NICs have been supported.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.
    Disclaimer: Attempting change is of your own free will.

  • Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE).

    I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
    Suddenly one of the servers is not replicating with the error:
    Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
    All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
    This server has 2TB of data so I'd rather not have to start the replication again.
    Does anyone have any pointers?
    Thanks.

    Hi drensta,
    Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
    Here is a link for "Why is the "Hyper-V Replica Broker" required?"
    http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
    Hope this hleps
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How can I process an xml/xsl file pair that require the Internet Explorer dom?

    My personal navigation device (GPS) generates xml files that contain a record of where I have been, together with when I was there, how fast I was driving at the time, etc. taken at approx. 5 second intervals. This xml file has an xml-stylesheet with type="text/xsl" but that stylesheet is written to the Internet Explorer dom standard. The stylesheet interfaces with google maps to display a map that shows my path and it also displays tables of data including distances that are computed from latitude/longitude pairs. I can supply a small sample xml file and the xsl file as well if they are needed to diagnose my problem. I cannot find any browser other than Internet Explorer that handles these files satisfactorily. I prefer to process them from a Linux environment but with the Internet Explorer requirement I cannot do so. The browsers that I have tried and that have failed are Firefox, Opera, Konqueror, Chrome, Epiphany, Midori, Arora, and Links.
    One line in the xls file in particular gives grief in the browsers like Firefox that at least attempt to do more than display the raw xml file:
    xmlns:cymath="urn:smiletime-cybarber-net:math"
    A comment in the xls file says this about the problem:
    "Tested and currently only compatible with Internet Explorer version 6 or version 7 (as this script includes JScript functions called by XSL, msxsl:script extension is required; also, the produced XHTML document embeds javascript functions exploiting the IE DOM).
    "In order to provide compatibility with Firefox, other than checking the compatibility of the IE DOM, the cymath:distCosineLaw function still needs to be ported."

    You may get an answer, but it is not really the sort of subject covered by this forum, I suggest you try [http://forums.mozillazine.org/viewforum.php?f=49 Mozilazine] and if you solve the problem post back again.

  • I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

    I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

    Is the menu bar missing (the one containing File, View, Edit etc)? If it is, the following link shows how to restore it - https://support.mozilla.com/kb/Menu+bar+is+missing

  • When i try to install my copy of photoshop elements 1.0.1 , get the answer to install internet explorer 4.0 or more, but i use the firefox browser. by the way, the internet explorer installation was not successful with my windows 8. What can I do?

    when i try to install my copy of photoshop elements 1.0.1 , get the answer to install internet explorer 4.0 or more, but i use the firefox browser. by the way, the internet explorer installation was not successful with my windows 8. What can I do?

    Photoshop Elements 1.0.1 seems like very old software 2001 I believe.  Try asking in the Elements maybe someone there will be able to answer your question. Photoshop Elements

  • Upload clipboard or file to a selection in the internet explorer

    Hello gurus,
    I built a query at the Bex 7 and on this query I built an WebTemplate in the Web Application Designer. This template is implemented in the portal. The customer open the template at the Internet Explorer (IE). At the beginning a selection screen is showed. On this screen customers could district the result of the query. The customer have to write many article in the selection.
    My question is: Do anyone know if there are an "Upload from clipboard or txt.-file to a selection"? Or can I develop this? Maybe in a User-Exit for example?
    Kind regards
    Tobias

    Hi Nina,
    I have not tried using paste with an input_field_item button.  We do the paste operation in the initial variable screen that comes up when the query is run. 
    For me, the fields of most interest are 0FUND and 0EMPLOYEE, which are NUMC values.  I am not sure what you mean with "110 signs", but I'll assume you mean 110 Characteristic values. 
    As a test, I pasted values into a variable field of type CHAR to see how it works.  It does, but I am not sure how many values can be pasted in.  For an InfoObject that is only a CHAR value, the unique values can be many.  I tried a few (using wildcard) such as:  VALUE1; TERM-A; SOMETHING
    This works.  However, the InfoObject was a CHAR(60).  Thus, if I tried to paste in 110 actual values (vs using a wildcard), the number of letters pasted would vary wildly as some of the fields have 5 letters, some have 60.  There must be a limit to the number of letters that can be pasted into the variable field? 
    Does this help?  BTW:  We are using BI 7.0 (SP19).
    Dave

  • How to fix problem of bypassing the submit button validation by pressing the space bar in the required fields. this occurrs in the internet explorer and chrome browser, but in foxfire.

    How to fix problem of bypassing the submit button validation by pressing the space bar in the required fields. This occurs in the internet explorer and chrome browse but not in foxfire

    How to fix problem of bypassing the submit button validation by pressing the space bar in the required fields. This occurs in the internet explorer and chrome browse but not in foxfire

  • Exchange BPA Errors (Exchange server is a virtual machine but the additional tools are not installed and The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing)

    Hi,
    I am running BPA on My Exchange 2010 VM (Server 2008 R2 VM on Hyper-V) and get the following errors:
    The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing or inaccessible. The Microsoft Exchange Information Store service won't start. As a result, all services that depend
    on this service won't be able to start
    Exchange server [Exchange Server FQDN] is a virtual machine but the additional tools are not installed. This configuration is not supported. Install Virtual Machine Additions for this guest.
    Problem is that, for the first, that Key exists and the service is actually running fine. And for the second my VM tools are already installed.
    Hopefully someone out there has had the same issue and can assist.
    Pete

    Hi Pete,
    For the first error message, please try the following steps:
    Make sure the Information Store service is in Starting status,
    Automatic startup type and works well, as a test we can try to
    restart the Infroamtion Store service and verify the service works well.
    Start
    Registry Editor, find the registry key “Services” under “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup”, its value is “C:\Program
    files\Microsoft\Exchange Server\v14”(default install location), please check your registry, make sure the key “Services” exist and value is the Exchange Server install location and the
    location is accessible;
    Start
    Registry Editor, and locate the following registry key:
    HKEY_LOCAL_MACHINE\Software\Microsoft\Exchange\Setup
    Use the
    Permission option under the Security tab to check the permission setting on this key. Make sure
    System is in the list with Full Control permissions if the service account is Local System. If you are not using Local System as the service account, check the existence of the corresponding account in the list and ensure that
    it has Full Control permissions. Please refer to this article:
    Title: Exchange Store Does Not Start: Errors 7024, 1026, 9542, and 5000
    Link:
    http://support.microsoft.com/kb/285116
    Start
    ADSI Edit, and then browse to the following location:
    Domain.com/Configuration/Services/Microsoft Exchange/Org/Administrative Groups/AdminGroup/Servers/Server Name
    Right-click the
    server name, and then click Properties.
    Click the
    Security tab, make sure this own server’s server object have
    full control permission on its own server.
    If not or the object is missing, please modify the permission or click
    Add, locate the computer account for the Exchange Server computer, add it to the Permissions list with full control.
    Click OK, and then close ADSI Edit.
    Use
    Active Directory Users and Computers to add the current affected
    Exchange Server computer account to the Exchange Servers(previous version should be “Exchange Domain Servers”) group in the
    Microsoft Exchange Security Groups( or Users) OU. Refer to this article:
    http://support.microsoft.com/kb/297295.
    Restart the Exchange Server computer, then rerun the ExBPA.
    For the second error message, Microsoft don’t recommend to install Exchange Server on virtual machine without additional tools, so the error message occurs. We can just ignore
    this message, it will not affect the Exchange servers.
    Regards, Eric Zou

  • Close the internet explorer which is called msword

    Hi,
    I made a procedure to call msword.
    My client pc works with IE6, win XP and msword 2002
    procedure DLBLOB(DocID IN NUMBER, Nom IN VARCHAR2)
    IS
         l_lob blob;
         l_amt NUMBER default 4096;
         l_off NUMBER default 1;
         l_raw raw(4096);
    BEGIN
         BEGIN
              SELECT document
              INTO l_lob
              FROM t_documents
              WHERE document_id = docId;
              BEGIN
         owa_util.mime_header( 'application/msword',false);
    htp.p ('Content-Disposition: attachment; filename='||Nom||'');
    owa_util.http_header_close;
              loop
                        dbms_lob.read( l_lob, l_amt, l_off, l_raw );
         htp.prn(utl_raw.cast_to_varchar2(l_raw));
         l_off := l_off+l_amt;
         l_amt := 4096;
         END loop;
         exception
                   when no_data_found then NULL;
         END;
         exception
              when no_data_found then
                   owa_util.status_line( 404, 'File Not Found' );
         END;
    END DLBLOB;
    First, a new explorer internet opens with a diakog box which aks me to open, to save, cancel the doc file.
    I choose open and my doc opens in word : OK but the internet explorer window doens't dissapear.
    Any idea to close this internet explorer window automatiwally?
    Regards,
    Patrick

    Firefox only allows you to save executable files. If you want to add an option to run them you can use the OpenDownload² add-on - https://addons.mozilla.org/firefox/addon/opendownload-10902

  • �Unable to create the virtual machine. The error was -4�

    I have a VS2003 C# application, which call JACE (a JNI wrapper) through C++ mixed mode to use JAVA object�s functions.
    Because the natural of our JAVA program it must be able to reach maximum heap size of 512MB, we set it during the startup of JVM by using �-Xmx512M� parameter.
    It worked well with a small PC (Dell Optiplex GX750 and Shuttle Xpc ) with only 512MB physical memory. We have about 50 machines running the application in the production.
    Recently, one of our customers installs the application to a larger PC ( Shuttle Xpc with different model), which has 1 GB of physical memory. The application started throw exception from JVM. The error message is �Unable to create the virtual machine. The error was -4�. I checked with JNI return code and found that -4 mean �not enough memory�.
    I did some experiment by running the application with 2GB PC, 1 GB PC, 1GB laptop, 512MB PC. I don�t found relationship between how much �maximum heap size� can be assigned and how much �physical memory� is available (reading from task manager). The 2GB machine can take only 128MB of �maximum heap size� However, 1GB machine can take up to 300MB of �maximum heap size�.
    I also use program like ImageJ (http://rsb.info.nih.gov/ij/) to test maximum heap size for it. I found that ImageJ can take 512MB maximum heap size without problem. It can even take 1024MB of maximum heap size.
    I have created a small program to duplicate this problem. Although it use exact the same code to start JVM up, it can go up to 650MB heap size for both 2GB and 1GB PC.
    This is puzzling. Does anyone know what are factors determine how much �maximum heap size� can be set for JVM from JNI?
    Software used
    Windows XP SP2
    Visual studio.net 2003 SP1 (the problem also occurred without SP1)
    .NET Framework 1.1 SP1
    JACE 1.1rc1_05
    JRE 1.5.07 (also tested with JRE 1.5.09 and 1.6.0 beta)

    Do you resolve the problem? If so what was the fix?
    I have been getting the Java Virtual Machine Launcher error message “Could not create the virtual machine” when attempting to run an Oracle application that uses JNLP via a browser. Even clicking on componets such as javaw.exe produces the error message. In conjunction with receiving the error message, the application that I am working with will not launch.
    I had JRE 5u10 and J2RE 1.4.2u13 installed and thought that installing JDK 5u17 may resolve the issue. I removed JRE 5u10 and J2RE 1.4.2u13 and installed JDK 5u17 (and the included JRE 5u17.) The error message was still there.
    I have unistalled (via Add/Remove programs) and reinstalled (via both Win off-line and on-line) JDK 5u17 and JRE 5u17 many times.
    During the uninstalls I have received a Java Web Start 1.5.0_17 bad installation – error invoking JVM error message.
    I have restarted the machine also.
    There are some remains of J2RE 1.4.2u13 still on the machine –even after the 1.4.2u13 uninstall. The Java\j2re1.4.2_13\lib folder remains.
    I am running Win XP SP2 and IE6 SP2.
    Note: I cannot use Java 6 since the application that I am working with is Java 5 based.

  • Oracle XE on multiple virtual machines on the same physical machine?

    hi,
    does oracle's licensing for 11g express edition prohibit running XE databases on multiple virtual machines on the same physical machine? if not, does the machine have to be "hard partitioned" per oracle specifications (link below) to make it legal?
    http://www.oracle.com/us/corporate/pricing/partitioning-070609.pdf
    i found a similar question regarding 10g express edition in the forum (link below), but it doesn't seem like the question was ever definitively answered.
    Oracle XE on multiple virtual machines on the same physical machine?
    thanks

    I thought until I just checked that this was a clear cut no in that it specifies 'a single server'. Now I'm not sure as 'server' is an amibuous term. I at least know that as soon as you start giving developers access to theor own XE instance for dev/testing that there are many VM environments where you can't really know what physical macine your VM is running on to actually be able to tell if you had multiple XE instances running on a single 'Physical' server. I'm not sure the question has been answered by Oracle though.

Maybe you are looking for