Virtualbox - install build and header files for your current kernel
I have initially installed virtualbox before upgrading the Arch
Also took backup of the kernle before upgrading since kernel26 2.6.30 is having problem with virtualbox
After upgrading I have configure the grub to use the previous kernel i.e 2.6.28
Later installed xorg and want to install the video drivers from VBox additions
but running
sh VBoxLinuxAdditions_x86.run
i get the following
install build and header files for your current kernel
The current kernel version is 2.6.28 Arch
What are the build and header files I have to install or search with pacman
And since i have upgraded the system will I able to look up the header and build files needed for kernel 2.6.28
dmartins - he's talking about his kernel's headers, not the kernel-headers package - they are two very differnet things.
sant527 - when you backed up the 2.6.28 kernel, did you remember the files in /usr/src/linux-2.6.28-ARCH/ ? They're what VBox is looking for.
Similar Messages
-
Does arch install library and header files into system when using abs?
In traditional make way, when compiling a package, I must install some library or header file or tool packages to satisfy its depends, but after compilation, I do "make install", and run it. At runtime, library and header file and tool packages are not needed....
This make a lot of unuseful packages are left in the system.....
In arch linux , when I using abs to make a package, does these packages are left in the system ?
How abs separates the compile-time depends and the runtime depends ????
Last edited by iamybj (2010-03-22 01:24:57)tomk wrote:
The PKGBUILD has a depends array and a makedepends array. Anything that's required at runtime goes in the depends array, and must be installed for the application to run successfully. Anything that's only required at buildtime foes in the makedepends array, and can be removed from the system after the application has been built.
man PKGBUILD and various wiki pages for more details.
Anything that's only required at buildtime foes in the makedepends array, and can be removed from the system after the application has been built.
==================
Who remove them ? user or the abs ??
I think the best method is file dependence , not package dependence.....
Software is arranged by package. but its dependence is file. When Install a package, pacman check its file dependence, and install the packages which include those files....
If a not explicit installed package 's file does not required by any other packages , it can be removed automatically !
In this situation ,pacman can find packages that not needed after compilation, and remove them.
Last edited by iamybj (2010-03-22 03:15:06) -
Using Cpp code and header files with LV8 CIN
Hello,
I have three pieces of C++ code and their header files that are called from a Main C++ code. I want to call these from a LV8, code interface node (CIN). I have the C++ compiler installed on teh same machine as LV8. My questions are:
1) How do I call the C++ code anf the header files from the LV CIN? I have never doen this. Is there a concise manul for this somewhere? Teh last thing any self-respecting engineer wants to do is read the manual.
2) Once I successfully call teh C++ and header files from within the CIN, can I create a LV runtime executable, just as I can with any other LV8 .vi? Will this runtime .exe run stand-alone as a distribuatble application? Do I need to include any special runtime files when I build the exectuable to support teh C++ code?
Thank you.http://forums.ni.com/ni/board/message?board.id=231&message.id=2424&requireLogin=False
handles your question. -
*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum
Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems -
Adobe Acrobat Pro XI download will not install; stalls at preparing files for extraction
Adobe Acrobat Pro XI download will not install; stalls at preparing files for extraction
what os?
what file(s) (name/extension) have your downloaded and is their file size? -
Sequence of Installs of RTA and SCA files for GRC AC 5.3
Hello,
I would like to confirm the correct sequence of applying RTA and SCA files for GRC AC 5.3.
On ABAP Stack
1- Install VirsaNH RTA on ECC 6.0 System with SAINT
2- Install VirsaHR RTA on ECC 6.0 system which has SAP_HR
3- Install both VirsaNH RTA and VIRSAHR RTA on a system which is SAP HR
4- Install VIRSANH RTA on BI System. (There is no need of VirsaHR on BI system)
5- Install all Support Packages up to 10 or 11 for VIRSANH & VIRSAHR with SPAM
Next
On JAVA Stack
6- Install
VIRCC00_0.sca
VIRAE00_0.sca
VIRRE00_0.sca
VIRFF00_0.sca
7- Install VIRACLP00_0.sca
8- Then install VIRACCNTNT.SAR
9- Next install EP RTA VIREPRTA00_0.sca
10- Install all Java patches for the above components
Based on the above,
a- Plz confirm if the above sequence is right.
b- My question is can I install 6, 7,8, 9 with JSPM at once as one step?
c- Also can I install SCA files with JSPM first and then install RTA files on ABAP stack later?
d- Also we have BI system with ABAP & JAVA Stacks. Is VIRSANH sufficient for both ABAP & JAVA, or do we need an additonal RTA for BI JAVA ?
Thanks for your valuable inputs in advance.
Regards,
HaleemHi,
> 1- What is the UME of your BI Java stack ?
>
> Answer: We have installed BI JAVA, EP, EP Core, so we use SSO with EP and BI ABAP. So the portal is UME for BI Java stack.
>
Check below link which will answer your queries:
Java RTA for GRC 5.3
> 2- Check SAP Note 1174625 - Access Control 5.3 Java Support Pack Installation
>
> I checked the note 1174625, which says the following
>
> All of the sap.com/grc files have to be undeployed except the db and dictionary files for each component. The files that are NOT to be undeployed are:
>
> - sap.com/grc/ccxsysdb
> - sap.com/grc/aedict
> - sap.com/grc/redictionary
> - sap.com/grc/ffdb
>
> Since this is a GRC AC 5.3 install on a fresh Netweaver 7.0 EHP1 Java stack install, do I need to undeploy all the above components, before doing AC 5.3 install, as mentioned in the note.
>
This is used when you do upgrade your old GRC release to latest one. So if you are doing fresh install then you need not to do these steps.
> 3- Also this note 1174625 answers to most of my questions, but does not mention anything about VIRACCNTNT.SAR. Is >this SAR file installed on JAVA Stack or ABAP stack? Is there a OSS note on VIRACCNTNT.SAR?
>
This file contains Roles, Rules, functions for RAR, CUP, ERM etc. in txt files which you need to upload when you will do the configuration of GRC.
Thanks
Sunny -
Hi - I understand I need to convert AVI and MPEG files for use within IMovie 11. I have one particular file that has a watermark stating "Created with Flip4Mac WMV Demo". Can someone please recommend the best program for a novice? Thanks!
Hi Susan,
It is no simpler converting vobs to mp4 than mpg (mpeg2).
There is *always* a loss of quality converting video from one lossy-compressed format to another, e.g. mpeg2 to mp4.
So, if you want to not lose any quality, then converting vobs to mpeg2 (mpg) is the thing to do (since there will be no video/audio re-compression), assuming Lr5 will accept them (sorry, but I do not know). example commands:
Mac: ffmpeg -i myvideo.vob -sameq myvideo.mpg
Win: ffmbc -i myvideo.vob -sameq myvideo.mpg
If Lr5 won't accept them, then you can convert to mp4 with minimal quality loss using a command like:
Mac: ffmpeg -i myvideo.vob -sameq myvideo.mp4
Win: ffmbc -i myvideo.vob -sameq myvideo.mp4
You may need variations of these commands depending on encoding of vob.
Note: -i means -input-file; -sameq means -same-quality, as much as possible.
ffm... is smart enough to avoid re-encoding, if possible, when -sameq is used, and makes reasonable choices for audio/video codecs based on extension of output file.
Of course, you'll need to download/install ffm... program if not already on your machine, and execute commands in a terminal or command window.
Do keep us posted please .
Cheers,
Rob -
I've installed iPhoto11 and when opening for the 1st time it says that needs to upgrade my library and it is doing this task since yesterday. Is this right??
No. Quit and try again. If that fails again,
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
The output file for your concurrent request is not initialized
Application: Application Object Library(FND)
Component Type: SERVICE_INSTANCE
Component Name: Standard Manager(STANDARD)
/*The output file for your concurrent request is not initialized.
Cause: Your concurrent program execution was not preceded by calls to standard
Application Object Library routines to initialize concurrent processing. FDPFOP
received a return code of failure.
Action: Change your concurrent program to initialize files by calling standard
Application Object Library routines. */
I got the mail with the above message from System ( Oracle Applicaitons Release 12.1.1)
I have checked the following metalink document
The Output File For Your Concurrent Request is Not Initialized: FDPFOP received a return code of failure [ID 296830.1]
I can not undestand, why the alert sends mail?
Could you please let me know..what happened to standard manager? how to resolve the above issue? why the above alert happened?
The above meatlink note did not help much....Hi;
>
/*The output file for your concurrent request is not initialized.
Cause: Your concurrent program execution was not preceded by calls to standard
Application Object Library routines to initialize concurrent processing. FDPFOP
received a return code of failure.
Action: Change your concurrent program to initialize files by calling standard
Application Object Library routines. */
The Output File For Your Concurrent Request is Not Initialized: FDPFOP received a return code of failure [ID 296830.1]
I can not undestand, why the alert sends mail? Could you please let me know..what happened to standard manager? how to resolve the above issue? why the above alert happened?I checked related note and it mention its internal bug which mean we cant say too many thing about issue.
The above meatlink note did not help much....It helped or not? Issue still appear or not?
Please run adadmin utulity >> from Maintain Applications Files>> Relink Applications programs
Be sure it wont through any error message than retest issue
Regard
Helios -
Convert Cisco WebEx .WRF and .ARF files for Mac OSX to .WMV
Since the Cisco WebEx Recording Editor doesn't appear to support Mac OSX, is there a way to convert Cisco WebEx recordings, .WRF and .ARF files, to .WMV or .SWF for a Mac OSX users?
Hi Ben,
Here is a copy/paste from the Arcsoft site:
What is a PHB file?
Question
What is a PHB file?
Answer
PHB files are proprietary album files used by some of our programs, namely PhotoBase. Albums do not store your images. They serve as links to files stored on your computer or removable drive. If you delete the original file, the thumbnail in the album basically becomes a dead link. For example, if you have files on a floppy disk and create an album, you'll always need to have that floppy in the drive whenever you want to view the full images. Likewise, if you have a digital camera that is read as a removable drive, you would need to have it connected if you create the album directly from the camera. The best thing to do is copy all of your images into a folder on your computer, then create the album referencing those files. Albums are useful because they let you preview and organize files on your system in a convenient fashion. It is also from albums that slide shows are made with some of our programs. -
I don't know how to install Mp3 and PDF file from my computer to IPhone?
I don't know how to install Mp3 and PDF file from my computer to IPhone? Please who can help me. Thanks
Please Get the iPhone User Manual for iOS 5.
Put such files into iTunes, sync to phone. Everything syncs from iTunes to phone. -
Looking to build a batch file for BCDedit
I'm trying to build a batch file for bcdedit to get the variable off of one of my boots for the identifier to use to build my dual boot system. I've been testing with trying to just get the identifier but I'm unable to get the variable when I try.
Any help will be greatly appreciated!
I've ran all the steps individually and they function like they are supposed to.
Here is the basics.
First I need to change the descriptions around so
bcdedit /set {current} description "Staff"
bcdedit /set (insert variable for second boot) description "test"
next I need to change order
bcdedit /displayorder {current} /addfirst
Last is to set the second drive partition
bcdedit /set (insert variable) device partition=D:
bcdedit /set (insert variable) osdevice partition=D:This is how I was finally able to get it up and working. I just got it this morning. I did end up having to use powershell:
#Set the colors for the console window
$Host.Ui.RawUi.BackGroundColor = "Black"
$Host.Ui.RawUi.ForeGroundColor = "White"
#Clear the screen
cls
Function WriteValue ($Label, $Value)
Write-Host $Label -foregroundcolor "Gray" -NoNewLine
Write-Host ": " -foregroundcolor "Gray" -NoNewLine
Write-Host $Value
Function WriteSuccess
Write-Host ": " -foregroundcolor "Gray" -NoNewLine
Write-Host Success -foregroundcolor "Green"
$otherboot = bcdedit /enum `
| Select-String "path" -Context 2,0 `
| % { $_.Context.PreContext[0] -replace '^identifier +' } `
| ? { $_ -ne "{current}" }
bcdedit /set $otherboot description "Test"
bcdedit /set $otherboot device partition=D:
bcdedit /set $otherboot osdevice partition=D:
WriteValue "Boot ID is" $otherboot
WriteSuccess -
Cannot install .pkg and .mpkg files
I have recently tried to install .pkg and .mpkg files but without success. When I double-click on a file, the installer icon appears in dock but I get the following error message: The operation couldn’t be completed. (com.apple.installer.pagecontroller error -1.).
The problem persists despite repairing permissions.
I have read several messages about this problem but there seems to be only one solution, and that is to reinstall the OS. I am seriously trying to avoid this unless there is a way to recover all my applications, including Parallels Desktop, Windows 7 and other Win applications.
I would greatly appreciate any advice. Many thanks.The problem persists despite repairing permissions.
Did you restart your computer after doing the above?
Disconnect all peripherals from your computer. Boot from your install disc & run _*Repair Disk*_ from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select *Disk Utility.*
Select the disk or volume in the list of disks and volumes, and then click *First Aid.*
Click _*Repair Disk.*_
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 -
How to use Dlls and Header files in my java Code?
Hi All,
I want to make use of dll and header files of DataStage, from my Java Interface.
i am buliding a product where i need to contact DataStage server from my Java Code alone, For this they provided dlls and header files
Now i wan to make use of them and need to perform DataStage operations from my Java Interface.
Can any on help out me regarding this?Try Java Platform SDK for native function calls without JNI writing code, like it done in .NET languages.
For MS Windows:
http://www.simtel.net/product.php[id]100916[SiteID]simtel.net
For Linux/Unix:
http://www.simtel.net/product.php[id]117719[SiteID]simtel.net -
when i try to install app and it prompts for password a apple id shows up from previous owner and i dont know password how do i switch it to my apple id? ive restored the phone and my apple id is registered as mine on phone
You don't. Apps are forever tied to the Apple ID used to originally obtain them & cannot be transferred to another Apple ID. You need to purchase the app using your ID.
Maybe you are looking for
-
Trying to connect my g5 to macbook pro with firewire?
Can I connect my g5 to my macbook pro?
-
How Do I Convert at Palette Into a Color Ramp?
Hello, Is there a way to convert the 5-color palettes created by Kuler into a continuous color ramp? Thanks, Doug Twitter: @dugla
-
I bought an iphone 5 in UAE has not the facetime more live in Brazil it will work the same?
My facetime does not wor for my iphone 5 and UAE dis and now?
-
Save 32 bit signed array as a png file
I am trying to save a 32 bit signed 2d array as a png file in labview. I have the data save as a .csv, but the file sizes are extremely large, so I was hoping to switch to another format to save space (must be lossless). I have tried converting the a
-
1. How do I see the changes, if any,made to the system configuration ?? So far We only see the Configs ..but never bothered to check this !!