Visio Database Wizard Error

I try to connect visio 2013 to a sql database. Purpose is to have shape data in sql database (not in excel or access).
I use the database wizard from the Add-Ons section in Visio and whatever existing table I select or whatever table I create from within this wizard (Define Table option) I get the following Visio Database Wizard Error:
'The selected table has one field or contains no definition information. The Database Wizard requires a minimum of one key field and one additional data field.'
Note that I tested succesfully to export the complete existing drawing to a database table using one of the other options and that I get exactly the same error when pointing to this exact table in sql server when starting the database wizard.
To be complete: I use Visio 2013 pro and SQL 2008 R2 Express edition.
Any thoughts?

Hi,
To the error message, the reason this error occurs is that the length of the Filepath to the sql database is too long. Visio has a hard limitation of 128 characters for a complete path.
There are a couple of ways to avoid this issue.
1. On a local drive, move the files to a location ‘higher’ in the folder list, to shorten the full pathname.
2. For a remote share, change the level of the drive letter mapping to a higher level to shorten the full pathname.
Similar to issue described in article:
http://support.microsoft.com/kb/287624/en-us
Regards,
George Zhao
TechNet Community Support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Visio Database Wizard fails - ODBC connection to MS SQL

When I try to create an ODBC connection in Visio's 2010's Database wizard I get the error: "Cannot set the database context information. Additional error information:ODBC Error: s1009. Database cxweba does not exist."
Note that the database name is cxwebapp_bkk. I get the same error if I connect to any database on that server, and it always truncates the name in the error message (if that is a hint to the error).
Using Visio 2013, after connecting to the database: when I select the database object I get the error message: "The selected table has only one field or contains no definition information. The Database Wizard requires a minimum of one key field
and one additional data field."
I have this problem using both SQL Server driver (6.02.9200.116384 and SQL Server Native Client 11.0 (2011.1102.2100.60).
I do not have this problem connecting to a MYSQL database with either version of Visio, nor do I have this problem when I link link to the same SQL database in a drawing and link shapes in that drawing using the "Link Data to Shapes" under the
Data tab.

Hello,
What's the version of the SQL Server instance you connect to? It seems that the Database Wizard in Visio 2010 not work well with the Microsoft SQL Server ODBC driver. Did you try to use the Generic OLEDB Provider for SQL Server?
Since the issue is more related to office Visio, please post the question in the following forum. More experts there will assist you:
Visio General Questions and Answers for IT Professionals
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Copy Database Wizard error: Enumerate subsystems failed for JobServer

Hi, non-SQL person looking for some guidance. I'm trying to copy databases with permissions from a Win2008 server with SQL2008R2 to a Win2012 server with SQL2012. I'm running SSMS on the 2012 instance, and intiating the Copy Wizard from there. I'm getting
the following error. Thanks.
TITLE: Copy Database Wizard
Enumerate subsystems failed for JobServer 'Win2012serverSQL2012'.
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=11.0.3401.0+((SQL11_SP1_QFE-CU).140109-1303+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Enumerate+subsystems+JobServer&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The EXECUTE permission was denied on the object 'sp_enum_sqlagent_subsystems', database 'msdb', schema 'dbo'. (Microsoft SQL Server, Error: 229)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.3401&EvtSrc=MSSQLServer&EvtID=229&LinkId=20476

TITLE: Copy Database Wizard
Create failed for JobStep 'NAME_CDW_2008ServerName_Win2012serverSQL2012'.
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.4000.0+((KJ_PCU_Main).120628-0827+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Create+JobStep&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The @flags parameter is not valid for a job step of type 'SSIS'. (Microsoft SQL Server, Error: 14545)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=11.00.3401&EvtSrc=MSSQLServer&EvtID=14545&LinkId=20476
BUTTONS:
OK
Hi scogordo,
From your description, are you using SSMS 2008 R2 to perform the copy action? I make a test on my computer, and get the same error as yours. To work around this issue, please use SSMS 2012 to copy database from SQL Server 2008 R2 to SQL Server 2012.
There is a feedback to Microsoft about the issue for your reference.
https://connect.microsoft.com/SQLServer/feedback/details/810037/copy-database-fails-when-copying-database-from-sql-server-2008-r2-sp2-to-sql-server-2012-sp1
Thanks,
Lydia Zhang

2008 r2 Copy Database Wizard Error code 0x80004005 (login timeout expired).

While on copy database wizard, step Configure the package I
get this error:
while trying to find a folder on sql an ole db error was encountered with error code 0x80004005 (login timeout expired).
If I try to run it any way, I got the following in the Execute stage:
the job failed. check the event log on the destination server for details
In the destination server, job history:
Message
Executed as user: WORKGROUP\servername$. Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1
for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 3:26:57 PM Could not load package "package name omitted" because of error 0xC0014062. Description: The LoadFromSQLServer method
has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed. Source: Started: 3:26:57 PM Finished: 3:27:44 PM Elapsed: 47.83 seconds. The package could
not be loaded. The step failed.
I check the job permission with the integration service connection. try with default and with db_ssisadmin.
other info:
Source: Other SQL Server Version, Microsoft SQL Server Enterprise Edition , Build 1617, Microsoft Windows NT 6.0 (6002) NT INTEL X86
Destination: Other SQL Server Version, Microsoft SQL Server Data Center Edition (64-bit) , Build 1600, Microsoft Windows NT 6.1 (7601) NT
x64 Using SMO online transfer

Hi kexinger,
This issue might be caused by the insufficient permission for the SQL Agent account, please check the SQL Agent service account has sufficient permissions to the various folders. For detail information, please take a look at the following article:
http://mattsql.wordpress.com/2014/01/06/quick-tip-could-not-load-package-xxx-because-of-error-0xc0014062/
If you have any feedback on our support, please click
here.
Elvis Long
TechNet Community Support

Error in last step of copy database wizard

Hi All,
I am getting below mentioned error in copy database wizard. I am using SSMS 2012 to copy a database from one server to another server using attach and detach method. Been stuck in this issue for quite sometime. Please provide your insights...
Event Name: OnError
Message: An error occurred while transferring data. See the inner exception for details.
StackTrace: at Microsoft.SqlServer.Management.Smo.Transfer.TransferData()
at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.TransferExtraObjectsViaSmoTransfer()
InnerException-->There is already an object named 'spt_values' in the database.
StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.SqlServer.Management.Smo.Transfer.ExecuteStatements(SqlConnection destinationConnection, IEnumerable`1 statements, SqlTransaction transaction)
at Microsoft.SqlServer.Management.Smo.Transfer.TransferData()
Operator: EMEA\INCHEJAI
Source Name: CDW_BIE-WV200_xxxx_xxxx_35
Source ID: {xxx-xxx-xxx-xxx-xxx}
Execution ID: {xxx-xxx-xxx-xxx-xxx}
Start Time: 24.09.2014 10:38:37
End Time: 24.09.2014 10:38:37
Data Code: 0
P.S - I am able to query and fetch the results for "select * from master.dbo.spt_values;"
in both my SOURCE and DESTINATION databases.
But the table name is not visible under System databases--> master --> Tables --> System Tables in my DESTINATION database alone.
Thanks,
DeeJay007

Hi,
Thanks for your response :). When I tried to attach the the database (.mdf and .ldf) and create a new database in DESTINATION server, it works fine. Only using "Copy database wizard" I face this problem. I am attempting this functionality from
the SQL Server 2012 instance
The Instances are not in same version. Find the specific details below for @@Version.
SOURCE Server Instance
Microsoft SQL Server 2008 (SP3) - 10.0.5500.0 (X64)
Sep 21 2011 22:45:45
Copyright (c) 1988-2008 Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.0 <X64> (Build 6002: Service Pack 2) (VM)
DESTINATION Server Instance
Microsoft SQL Server 2012 (SP1) - 11.0.3000.0 (X64)
Oct 19 2012 13:38:57
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
When you use the copy database functionality, your database gets upgraded to match the destination server version. The database cannot be downgraded, which is fine in your case. It could be a bug in the upgrade process between these two specific sql server
versions though.
Can you make a test with another destination instance, with the same version as the original destination (2012 SP1) just to rule out the possibility of system database corruption?
Does this happen with only a single database, or does the wizzard fail for any database you try to copy?
I have the "u_tables.sql" file which has the scripts for some master database tables. In the process of trying to rebuild the system database and if I lose the master DB contents, will executing the "u_tables.sql" be sufficient to restore
the details?? Many DB's are available in the server, so the risk is very high.
No. However, your application databases won't be affected. You'll lose all your server objects, including but not limited to logins, linked servers, backup triggers, server roles, etc. You'll also lose the contents of the msdb database (jobs, database mail
configurations, backup history, maintenance plans, etc). Please refer to the article I sent you for more information. It contains safety instructions on how to backup most of these objects.
Try to do the tests I suggested above before rebuilding your system databases.
Is there any restrictions for "Copy database wizard" which I am missing here?
No I dont think so. Based on the information you provided, it should be working.

OIM 11g Server Configuration Wizard Error - Cannot Connect to Oracle DB

I appreciate any and all suggestions or thoughts on how to best continue troubleshooting this error that I am describing below.
I am attempting to install Oracle Identity and Access Management Suite 11g on a Windows 7 machine…in following the installation guides I have successfully installed the following Oracle Components
- Oracle Database 11.2.0.1.0
- Created Schemas using RCU 11.1.1.3.3
- Oracle WebLogic Server 10.3.3.0
- Oracle SOA 11.1.1.2.0
- Oracle SOA 11.1.1.3.0 (Patch Set)
- Oracle IAM SUITE 11.1.1.3.0
Following the above installations, I created a new WebLogic Domain and as the next step am running the OIM Configuration Wizard to configure the OIM Server, however I am unable to setup a connection to the Oracle DB via the OIM Configuration Wizard. I am getting an error message when attempting to setup the connection to the Oracle Database using the OIM 11g Server Configuration Wizard:
ERROR:*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
When installing the Oracle Database 11gR2 I used the following install configuration:
Oracle base: C:\MyApps\Oracle
Software location: C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1
Database file location: C:\MyApps\Oracle\DB_HOME\oradata
Database Edition: Personal Edition (3.27 GB)
Character Set: Unicode (AL32UTF8)
Global database name: orcl.dev.com
Administrative Password: Password1
Confirm Password: Password1
When creating my Schemas using RCU 11.1.1.3.3 I used the following Database Connection Details
DB TYPE: Oracle Database
HOST NAME: localhost
PORT: 1521
SERVICE NAME: orcl.dev.com
USERNAME: sys
PASSWORD: Password1
ROLE: SYSDBA
I used a Prefix of “DEV” when creating the schemas so Schema Owners DEV_OIM and DEV_MDS where created. Also, I configured to use the same password for all Schemas: “Password1″. So the password for DEV_OIM and DEV_MDS should be the same, “Password1″.
REPRODUCING THE ERROR
To reproduce the error, when I launch the Oracle Identity Management 11g Configuration Wizard I am first brought to the “Welcome” Screen. I click the [Next>] button.
Next, I am on the “Components to Configure” screen where I select OIM Server and OIM Design Console and click the [Next>] button. (NOTE I have also tested by simply selecting only the OIM Server)
Next, I am on the “Database” screen where I enter the connection information
Connection String: localhost:1521:orcl.dev.com
(NOTE I have also tested using localhost:1521:orcl)
OIM Schema User Name: DEV_OIM
OIM Schema Password: Password1
MDS Schema User Name: DEV_MDS
MDS Schema Password: Password1
When I click the [Next>] button after entering the Database Connection details I encounter the following two errors (1 error for each logon DEV_OIM and DEV_MDS)
INST:6102 Unable to connect to the database with the given credentials.
INST:6102 Unable to connect to the database with the given credentials.
TROUBLESHOOTING
NOTE: I can successfully start the Oracle DB Services and connect via the Enterprise Console, SQL Plus, and JDBCTest Java Client…I just cannot get past this connection error in the OIM Server Configuration Wizard.
JDBCTest.java TEST CLIENT
NOTE: THIS IS THE JAVA TEST CLIENT THAT I AM USING TO TEST DATABASE CONNECTIVITY THRU A SPECIFIED JDBC URL AND DRIVER THAT WORKS SUCCESSFULLY.*
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.DriverManager;
import java.sql.ResultSet;
public class JDBCTest {
public static void main(String[] args) throws Exception {
String url = "jdbc:oracle:thin:@localhost:1521:orcl";
String driver = "oracle.jdbc.OracleDriver";
String user = "DEV_OIM";
String password = "Password1";
try {
Class.forName(driver);
Connection conn = DriverManager.getConnection(url, user, password);
// Get the MetaData
DatabaseMetaData metaData = conn.getMetaData();
// Get driver information
System.out.println("");
System.out.println("#########################################");
System.out.println("# ***DRIVER INFORMATION***");
System.out.println("#");
System.out.println("# Driver Name = " + metaData.getDriverName());
System.out.println("# Driver Version = " + metaData.getDriverVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get database information
System.out.println("#########################################");
System.out.println("# ***DATABASE INFORMATION***");
System.out.println("#");
System.out.println("# Database Product Name = " + metaData.getDatabaseProductName());
System.out.println("# Database Product Version = " + metaData.getDatabaseProductVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get schema information
ResultSet schemas = metaData.getSchemas();
System.out.println("#########################################");
System.out.println("# ***SCHEMA INFORMATION***");
System.out.println("#");
System.out.println("# Schemas:");
while (schemas.next()) {
System.out.println("# " + schemas.getString(1));
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get table information
System.out.println("Tables");
ResultSet tables = metaData.getTables("", "", "", null);
while (tables.next()) {
System.out.println(tables.getString(3));
conn.close();
} catch (Exception ex) {
ex.printStackTrace();
*"lsnrctl status" COMMAND TEST SUCCESSFUL*
When the Listener Service is on I get the following output using lsnrctl status command
C:\> lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-SEP-2010 15:59:43
Copyright (c) 1991, 2010 Oracle. All rights reserved.
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows:Version 11.2.0.1.0 - Production
Start Date 21-SEP-2010 14:43:57
Uptime 0 days 1 hr. 15 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
Listener Log File c:\myapps\oracle\diag\tnslsnr\\listener\alert\log.xml
Listening Endpoints Summary…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary…
Service “CLRExtProc” has 1 instance(s).
Instance “CLRExtProc”, status UNKNOWN, has 1 handler(s) for this service…
Service “orcl.dev.com” has 1 instance(s).
Instance “orcl”, status READY, has 1 handler(s) for this service….
Service “orclXDB.dev.com” has 1 instance(s).
Instance “orcl” status READY, has 1 handler(s) for this service…
The command completed successfully

Whenever installing oracle databases, i install the software only first. Then i setup the listener. Then i create a database instance using the dbca tool. This way all the information is added to the pre-existing listener configurations rather than trying to create the listener afterwards. Also, during the dbca database creation, i supply a full service name such as orcl.hostname and use the service name in future configurations where it asked. This usually solves any issues of the listener or database not being found correctly.
-Kevin

SQL 2012 Copy Database Wizard fails

I am trying to use the Copy Database Wizard in SQL Server 2012
The host is running SQL Server 2000 (8.00.2066 (SP4)) on a Windows 2003 server
The destination is SQL Server 2012 running on Windows Server 2012 Standard.
Its gets to Execute SQL Server Agent Job and fails with this error:
The job failed. Check the event log on the destination server for details
Fails at – Execute SQL Server Agent Job
I've looked at the application log and not sure which errors are relevant. Here are two of them:
the first is an error, the second a warning.
Log Name: Application
Source: SQLISPackage110
Date: 1/9/2015 11:39:24 AM
Event ID: 12291
Task Category: None
Level: Error
Keywords: Classic
User: NT SERVICE\SQLSERVERAGENT
Computer: SQL2013
Description:
Package "CDW_SQL_SQL2013_7" failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="SQLISPackage110" />
 <EventID Qualifiers="16385">12291</EventID>
 <Level>2</Level>
 <Task>0</Task>
 <Keywords>0x80000000000000</Keywords>
 <TimeCreated SystemTime="2015-01-09T16:39:24.000000000Z" />
 <EventRecordID>456924</EventRecordID>
 <Channel>Application</Channel>
 <Computer>SQL2013</Computer>
 <Security UserID="S-1-5-80-344959196-2060754871-2302487193-2804545603-1466107430" />
</System>
<EventData>
 <Data>CDW_SQL_SQL2013_7</Data>
</EventData>
</Event>
Log Name: Application
Source: SQLSERVERAGENT
Date: 1/9/2015 11:39:26 AM
Event ID: 208
Task Category: Job Engine
Level: Warning
Keywords: Classic
User: N/A
Computer: SQL2013
Description:
SQL Server Scheduled Job 'CDW_SQL_SQL2013_7_1' (0xDFA5EEDDB2D53A4FB3C7CED04563896E) - Status: Failed - Invoked on: 2015-01-09 11:39:18 - Message: The job failed. The Job was invoked by User VGBtR3r0WgKjvthk. The last step to run was step 1 (CDW_SQL_SQL2013_7_1_Step).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="SQLSERVERAGENT" />
 <EventID Qualifiers="16384">208</EventID>
 <Level>3</Level>
 <Task>3</Task>
 <Keywords>0x80000000000000</Keywords>
 <TimeCreated SystemTime="2015-01-09T16:39:26.000000000Z" />
 <EventRecordID>456927</EventRecordID>
 <Channel>Application</Channel>
 <Computer>SQL2013</Computer>
 <Security />
</System>
<EventData>
 <Data>CDW_SQL_SQL2013_7_1</Data>
 <Data>0xDFA5EEDDB2D53A4FB3C7CED04563896E</Data>
 <Data>Failed</Data>
 <Data>2015-01-09 11:39:18</Data>
 <Data>The job failed. The Job was invoked by User VGBtR3r0WgKjvthk. The last step to run was step 1 (CDW_SQL_SQL2013_7_1_Step).</Data>
</EventData>
</Event>
Any ideas would be appreciated. I'm anxious to retire this old SQL 2000 server!
Mike

Thanks David.
is this the log you are looking for:
Date 1/9/2015 11:39:18 AM
Log Job History (CDW_SQL_SQL2013_7_1)
Step ID 1
Server SQL2013
Job Name CDW_SQL_SQL2013_7_1
Step Name CDW_SQL_SQL2013_7_1_Step
Duration 00:00:08
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 11:39:18 AM Progress:
2015-01-09 11:39:18.61 Source: sql_SQL2013_Transfer Objects Task Task just started the execution.: 0% complete End Progress Error: 2015-01-09 11:39:24.50 Code: 0x00000000
Source: sql_SQL2013_Transfer Objects Task Description: An error occurred while transferring data. See the inner exception for details. StackTrace: at Microsoft.SqlServer.Management.Smo.Transfer.TransferData()
at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.TransferExtraObjectsViaSmoTransfer() InnerException-->The specified schema name "INFORMATION_SCHEMA" either does not exist or you do not have permission to use it.
StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject
stateObj, Boolean& dataReady) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1
completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SqlServer.Management.Smo.Transfer.ExecuteStatements(SqlConnection
destinationConnection, IEnumerable`1 statements, SqlTransaction transaction) at Microsoft.SqlServer.Management.Smo.Transfer.TransferData() End Error Progress: 2015-01-09 11:39:24.50 Source: sql_SQL2013_Transfer
Objects Task Database transfer failed for one or more extra objects.: 0% complete End Progress Progress: 2015-01-09 11:39:24.50 Source: sql_SQL2013_Transfer Objects Task
Transfer objects finished execution.: 100% complete End Progress Warning: 2015-01-09 11:39:24.52 Code: 0x80019002 Source: CDW_SQL_SQL2013_7 Description: SSIS Warning
Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change
the MaximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:39:18 AM Finished: 11:39:24 AM Elapsed: 6.062 seconds. The package execution failed.
The step failed.
I will also look into backup/restore. Will that work between 2000 and 2012?

Missing Database Wizards in Beta 1

Has anyone found the Flex Builder 3 database wizards as
described by Matt Chotin in
http://www.adobe.com/devnet/flex/articles/flex3_whatsnew.html
Are they included in beta 1 or not ?
Do they run on Mac OS X or are they stupidly Windows only
(very lame in the not-buying-license way if that is the case)
Installing FB3 as plugin to Eclipse 3.2.2+WTP 1.5+DTP 0.9
gives a 'Create Database Accessor' toolbar item.
Clicking it gives
java.lang.NoClassDefFoundError:
org/eclipse/datatools/connectivity/internal/ConnectionProfileManager
in PDE Error Log view.
Which looks like something wrong with DTP install - which
wizards might be depending on ?
Ideas anyone ?

I figured this out - it might have existed in Beta 1, but I would not have noticed. Here is what I think is the situation.
I only created Beta 1 apps using Excel spreadsheets. My image locations pointed to image feeds on the web and not locally, and took a few seconds too load before the app would display and there was a white intermediary screen after the splash, but before
the first page. I believe I posted a while back that this annoyed me.
I had an "ah HA" moment and created a new app from scratch with beta 2 that only used an Excel spreadsheet as a data source. SAME behavior, mostly. I did see the extended splash screen display (after I messed with the images and colors so that I could see
that there was an extended splash and when it displayed).
On a hunch, I added a REST data source that I am not currently using to the project and republished, installed app. produced for store. As I suspected from my ah HA moment, the Loading Animation showed up. Eureka.
1. I don't know if this is a bug and if the Loading animation should be available no matter what the data source is.
2. If it is by design, I'd like the option to include it - yes I will add to the requested features thread if someone from the Team confirms by design.
3. I didn't test to see what kinds of data sources = loading animation and which don't. If by design, is there a list of which do?
4. The work around for anyone looking to include the Loading animation who isn't seeing it MAY be to include a REST data source;
you do NOT have to use it, it only has to be added to the project.
-- Barb Bowman

CUACEE_SV_9.0.1.10 fails to install, hangs at database wizard

During the install we get to the point where the database wizard just hangs and it goes no further.
Following is the application log - nothing happens after the event ID 5084 and you have to force the wizard to close. it will stay that way all day.

I'm not quite sure what you are missing, but it looks like you missed a script which could cause problems. You need to look through your logs for errors. Are you running rel853 as the AccessID user? I don't know how you would trash PSSTATUS in this process.
You don't mention running this.
Task 4-3-2: Creating Tablespaces
This step runs the PTDDLUPG script, which builds new tablespaces as part of the upgrade to the new PeopleSoft release.
It creates tablespace PSIMAGE2, which doesn't exist in the datamover load you did. Oracle moves and puts around 208 tables here when you run rel853 from what I see.
The first line of rel853 is
UPDATE PSSTATUS SET TOOLSREL='8.53',
LASTREFRESHDTTM = SYSDATE
This is what changes the tools release, sometimes people just run this one update to gain quick and dirty access to a different version.
I pulled this download and ran through it myself without incident doing all the steps you say, adding in 4-3-2 which you seemed to have skipped. I built a system database.
My hcengs.log shows
Importing PSSTATUS
Creating Table PSSTATUS
Import PSSTATUS 1
Building required indexes for PSSTATUS
Updating statistics for PSSTATUS
Records remaining: 7686
After import, PSSTATUS is
SQL> select toolsrel from sysadm.psstatus;
TOOLSREL
8.52
After running rel853n it's now
SQL> COMMIT
2 ;
Commit complete.
SQL> SPOOL OFF
SQL> select toolsrel from sysadm.psstatus;
TOOLSREL
8.53
I ran the other 3 quick scripts. Not sure if it was necessary, but I reset the passwords and re-encrypted them with the new 8.53 datamover for the new salted encryption and fired up app designer. It works. By the way, you should probably run rel853n, it utilizes "newer" (for PeopleSoft that is) data-types than just rel853.sql that were delivered with the 9.0 application line. Since this is a new 9.0 based app build it should be used.

Crystal Report throws Unexpected Database Connector error

Hi, 
 
We are using Crystal report 2008 CR4E API to implement the crystal report in our application. We use the below code to reset the report data source with our application data source. It works fine for most of the simple queries. But if the query contains any function defined in the SELECT Clause it throws Unexpected Database Connector error. As per the log and analysis we believe the root cause of the exception is it consider that function as column in the table and throws the SQL Exception that "function is Invalid Identifier". Could you please help in resolving this issue?
 
Code: 
 Tables tables = clientDoc.getDatabaseController().getDatabase().getTables(); 
 for(int i = 0;i < tables.size();i++){ 
 origTable = tables.getTable(i); 
 if (tableName == null || origTable.getName().equals(tableName)) { 
 newTable = (ITable)origTable.clone(true); 
 newTable.setQualifiedName(origTable.getAlias()); 
 connectionInfo = newTable.getConnectionInfo(); 
 propertyBag = new PropertyBag(); 
 propertyBag.put("Trusted_Connection", params.trustedCon); 
 propertyBag.put("Server Type", params.serverType); 
 propertyBag.put("Use JDBC", params.useJdbc); 
 propertyBag.put("Database DLL",params.databaseDLL); 
 propertyBag.put("Connection URL", params.connectionURL); 
 propertyBag.put("Database Class Name", params.dbClassName); 
 connectionInfo.setAttributes(propertyBag); 
 connectionInfo.setUserName(params.userName); 
 connectionInfo.setPassword(params.password); 
 clientDoc.getDatabaseController().setTableLocation(origTable, newTable); // Exception is thrown here 
 } 
 } 
 
SQL Query : 
Select empno, Fun_getEmpAddress(empno) from employee where empno = ? 
Error Log: 
2011-04-26 16:30:41.926 89022900 CrystalReportParms_jsp._jspService(368) Error while generating crystal report 
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Unexpected database connector error---- Error code:-2147467259 Error code name:failed 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:2285) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:2305) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:737) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:527) 
 at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:525) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:424) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:352) 
 at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54) 
 at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67) 
 at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716) 
 at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125) 
 at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537) 
 at com.crystaldecisions.sdk.occa.report.application.ds.a(SourceFile:186) 
 at com.crystaldecisions.sdk.occa.report.application.an.a(SourceFile:108) 
 at com.crystaldecisions.sdk.occa.report.application.b0.if(SourceFile:148) 
 at com.crystaldecisions.sdk.occa.report.application.b0.b(SourceFile:95) 
 at com.crystaldecisions.sdk.occa.report.application.bb.int(SourceFile:96) 
 at com.crystaldecisions.proxy.remoteagent.UndoUnitBase.performDo(SourceFile:151) 
 at com.crystaldecisions.proxy.remoteagent.UndoUnitBase.a(SourceFile:106) 
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(SourceFile:2159) 
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(SourceFile:543) 
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(SourceFile:3898) 
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(SourceFile:2906) 
 at com.mysystems.myapp.common.CRJavaHelper.changeDataSource(CRJavaHelper.java:157) 
 at com.mysystems.myapp.common.CrystalReport.print(CrystalReport.java:202) 
 at org.apache.jsp.english.CrystalReportParms_jsp._jspService(CrystalReportParms_jsp.java:368) 
 at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70) 
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) 
 at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:377) 
 at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:313) 
 at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:260) 
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) 
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) 
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) 
 at com.mysystems.myapp.common.MyServletFilter.doFilter(MyServletFilter.java:107) 
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) 
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) 
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) 
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) 
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) 
 at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) 
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) 
 at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) 
 at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:857) 
 at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588) 
 at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489) 
 at java.lang.Thread.run(Thread.java:595) 
Caused by: com.crystaldecisions.reports.common.QueryEngineException: Unexpected database connector error 
 at com.crystaldecisions.reports.queryengine.Connection.bf(SourceFile:2958) 
 at com.crystaldecisions.reports.queryengine.Rowset.z3(SourceFile:944) 
 at com.crystaldecisions.reports.queryengine.Rowset.bL(SourceFile:533) 
 at com.crystaldecisions.reports.queryengine.Rowset.zM(SourceFile:245) 
 at com.crystaldecisions.reports.queryengine.Connection.a(SourceFile:776) 
 at com.crystaldecisions.reports.queryengine.Table.a(SourceFile:2234) 
 at com.crystaldecisions.reports.queryengine.Table.if(SourceFile:2161) 
 at com.crystaldecisions.reports.queryengine.Table.try(SourceFile:1525) 
 at com.crystaldecisions.reports.queryengine.Table.a(SourceFile:568) 
 at com.crystaldecisions.reports.queryengine.Table.u7(SourceFile:2405) 
 at com.crystaldecisions.reports.dataengine.datafoundation.AddDatabaseTableCommand.new(SourceFile:529) 
 at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71) 
 at com.crystaldecisions.reports.common.Document.a(SourceFile:203) 
 at com.businessobjects.reports.sdk.requesthandler.f.a(SourceFile:175) 
 at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.byte(SourceFile:1079) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1167) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:661) 
 ... 47 more 
Caused by: com.businessobjects.reports.jdbinterface.common.DBException: Unexpected database connector error 
 at com.crystaldecisions.reports.queryengine.driverImpl.jdbc.JDBCQueryDefinition.Execute(Unknown Source) 
 at com.crystaldecisions.reports.queryengine.driverImpl.jdbc.JDBCQueryDefinition.Execute(Unknown Source) 
 at com.crystaldecisions.reports.queryengine.Connection.bf(SourceFile:2953) 
 ... 63 more 
Caused by: java.sql.SQLException: ORA-00904: "Fun_getEmpAddress": invalid identifier 
 
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:124) 
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304) 
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271) 
 at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:622) 
 at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:111) 
 at oracle.jdbc.driver.T4CStatement.execute_for_describe(T4CStatement.java:350) 
 at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:895) 
 at oracle.jdbc.driver.T4CStatement.execute_maybe_describe(T4CStatement.java:382) 
 at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:985) 
 at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:1515) 
 ... 66 more 

i'm also getting the same error when i'm trying to call stored procedure (that will fetch the result set and populate the report) through the query in the report-viewer.jsp. The result set is fetched i.e. when i print the result set it shows on tomcat but it is not getting passed to Table object to populate the report. However when i try to give the query explicitly in the form of SELECT statements, it works fine i.e. i can view the report in the browser. But giving query in the form of SELECT is a very naive way and is ok if u have too less reports not requiring too many joins, thats why i was using stored procedure. Any help would be appreciated.

Database Connection Error:BAPI Error #0

I have a problem when I preview a report in Crystal Reports 2008 using BW MDX Query I had recieved the following messages:
1.Failed to retrieve data from database
and then when I click ok
2.Database Connection Error:BAPI Error #0
Error occurred when starting the parser:timeout during allocate / CPIC-CALL'ThSAPCMRCV'
I copied the query of crystal report and I execute it inside the transaction of mdxtest
SELECT NON EMPTY EXCEPT([0CALMONTH].MEMBERS, {[0CALMONTH].[All]}) ON ROWS FROM [USD_SD_C0/RPT_1] SAP VARIABLES [!V000001] INCLUDING [0CALMONTH].[200401]
I found the debugger had stopped in the line Break when I click on F8
I recieve the following error
Error occurred when starting the parser: timeout
during allocate / CPIC-CALL: 'ThSAPCMRCV'
Please anybody can help me

Dear Ingo
I had read this note
I applied the following:
1.I didn't found the lrfc32.dll in the windows/system32 in my BW server so I asked my basis administrator to upgrade the kernel
2.after this step I didn't find it again so I had copied the file from the new kernel and copied it to system32 and sysWow
3.I register successfuly the lrfc32.dll using the commanf regsvr c:/windows/system32/lfrc32.dll
(note: this step didn't succeed until I had installed SAP GUI in BW server because as I observed that there is a need for C++ compiler which is installed by default when you install GUI)
after all of this I cannot run any crystal report based on any BW query
So Please anyboday can help

How do I fix the Database Organizer Error when using Acrobat 9 Pro on desktop PC with Windows 8.1 and 64-bit OS?

After loading Acrobat 9 Pro on my desktop PC (Windows 8.1; 64-bit OS), opening and closing a previously saved pdf file, I constantly get a message pop-up that indicates a "database organizer" error.
How do I fix this?
I have read multiple responses at various forums and they do not seem to apply, or have not worked for others, with regard to the details of my version of Acrobat and Windows OS.
I'm beginning to think that the only solution is to purchase the latest version of Acrobat Pro and install it on my PC, which, of course, I would prefer not to do, unless this is my only viable option.
Can this problem, specific to my version of Acrobat and Windows OS, be fixed or is the simple answer: purchase the latest version of Acrobat Pro, because there is no fix for my version of Acrobat/Windows OS?
Any help would be greatly appreciated.
FHW

Hi Frank ,
Please refer to the following link and see if this helps.
https://helpx.adobe.com/acrobat/kb/error-organizer-database-damaged-reset-1.html
Regards
Sukrit Dhingra

Database Connection Error Cannot create PoolableConnectionFactory

Hello everyone,
Background:
I have a newly installed and configured Ubuntu server running Tomcat5.5 and Mysql 5.0. This server was created in an attempt to migrate from a Red Hat server in a similar configuration, running the exact same webapp. Most of the configuration/classpath differences between the two platforms have been ironed out.
The Problem:
When our webapp trys to connect to the database on localhost, an exception 'java.security.AccessControlException: access denied (java.net.SocketPermission localhost resolve)' is generated.
The server.xml configuration is below:
<Resource name="jdbc/EconDollarsDB"
auth="Container"
type="javax.sql.DataSource"
username="user"
password="pass"
driverClassName="com.mysql.jdbc.Driver"
url="jdbc:mysql://localhost:3306/DBName?autoReconnect=true"
maxActive="20" maxIdle="5"
/>I can connect to the database just fine using the command line client and the same username/password combo. This configuration has been working fine for at least a year on the older server. The only similar problems I have found on the net (meaning the same exception is generated) involve applets and attempts to connect to different hosts. This case involves a webapp, connecting to localhost, using a configuration that is known to work! I am simply baffled.
The following stacktrace is generated:
javax.servlet.ServletException: Database Connection Error
Cannot create PoolableConnectionFactory (Server connection failure during transaction. Due to underlying exception: 'java.security.AccessControlException: access denied (java.net.SocketPermission localhost resolve)'.
** BEGIN NESTED EXCEPTION **
java.security.AccessControlException
MESSAGE: access denied (java.net.SocketPermission localhost resolve)
STACKTRACE:
java.security.AccessControlException: access denied (java.net.SocketPermission localhost resolve)
 at java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
 at java.security.AccessController.checkPermission(AccessController.java:427)
 at java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
 at java.lang.SecurityManager.checkConnect(SecurityManager.java:1031)
 at java.net.InetAddress.getAllByName0(InetAddress.java:1117)
 at java.net.InetAddress.getAllByName0(InetAddress.java:1098)
 at java.net.InetAddress.getAllByName(InetAddress.java:1061)
 at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:137)
 at com.mysql.jdbc.MysqlIO.<init>(MysqlIO.java:276)
 at com.mysql.jdbc.Connection.createNewIO(Connection.java:2769)
 at com.mysql.jdbc.Connection.<init>(Connection.java:1531)
 at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:266)
 at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:37)
 at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:290)
 at org.apache.commons.dbcp.BasicDataSource.validateConnectionFactory(BasicDataSource.java:877)
 at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:851)
 at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:540)
 at edu.tamu.erl.database.dblibrary.plugin.TomcatConnectionFactory.getConnection(TomcatConnectionFactory.java:102)
 at edu.tamu.erl.database.dblibrary.DBManager.getConnection(DBManager.java:70)
 at edu.tamu.erl.database.dblibrary.DBManager.getDBDataAccessObjectList(DBManager.java:318)
 at edu.tamu.erl.econdollars.middletire.SessionManager.getSessionStatus(SessionManager.java:157)
 at edu.tamu.erl.econdollars.middletire.SessionManager.retallyDB(SessionManager.java:637)
 at org.apache.jsp.admin.login_jsp._jspService(login_jsp.java:88)
 at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
 at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
 at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
 at java.security.AccessController.doPrivileged(Native Method)
 at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
 at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:272)
 at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:245)
 at org.apache.catalina.core.ApplicationFilterChain.access$0(ApplicationFilterChain.java:50)
 at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:156)
 at java.security.AccessController.doPrivileged(Native Method)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:152)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
 at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
 at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
 at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
 at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:540)
 at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
 at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
 at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
 at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
 at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
 at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
 at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
 at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
 at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
 at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
 at java.lang.Thread.run(Thread.java:595)
** END NESTED EXCEPTION **
Attempted reconnect 3 times. Giving up.)
 org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:846)
 org.apache.jasper.runtime.PageContextImpl.access$11(PageContextImpl.java:65)
 org.apache.jasper.runtime.PageContextImpl$12.run(PageContextImpl.java:766)
 java.security.AccessController.doPrivileged(Native Method)
 org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:764)
 org.apache.jsp.admin.login_jsp._jspService(login_jsp.java:242)
 org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
 javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
 org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
 org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
 javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 java.lang.reflect.Method.invoke(Method.java:585)
 org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
 java.security.AccessController.doPrivileged(Native Method)
 javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
 org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:272)
 org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)
edu.tamu.erl.database.dblibrary.DBLibraryBaseException: Database Connection Error
Cannot create PoolableConnectionFactory (Server connection failure during transaction. Due to underlying exception: 'java.security.AccessControlException: access denied (java.net.SocketPermission localhost resolve)'.
** BEGIN NESTED EXCEPTION **
java.security.AccessControlException
MESSAGE: access denied (java.net.SocketPermission localhost resolve)
STACKTRACE:
java.security.AccessControlException: access denied (java.net.SocketPermission localhost resolve)
 at java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
 at java.security.AccessController.checkPermission(AccessController.java:427)
 at java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
 at java.lang.SecurityManager.checkConnect(SecurityManager.java:1031)
 at java.net.InetAddress.getAllByName0(InetAddress.java:1117)
 at java.net.InetAddress.getAllByName0(InetAddress.java:1098)
 at java.net.InetAddress.getAllByName(InetAddress.java:1061)
 at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:137)
 at com.mysql.jdbc.MysqlIO.<init>(MysqlIO.java:276)
 at com.mysql.jdbc.Connection.createNewIO(Connection.java:2769)
 at com.mysql.jdbc.Connection.<init>(Connection.java:1531)
 at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:266)
 at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:37)
 at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:290)
 at org.apache.commons.dbcp.BasicDataSource.validateConnectionFactory(BasicDataSource.java:877)
 at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:851)
 at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:540)
 at edu.tamu.erl.database.dblibrary.plugin.TomcatConnectionFactory.getConnection(TomcatConnectionFactory.java:102)
 at edu.tamu.erl.database.dblibrary.DBManager.getConnection(DBManager.java:70)
 at edu.tamu.erl.database.dblibrary.DBManager.getDBDataAccessObjectList(DBManager.java:318)
 at edu.tamu.erl.econdollars.middletire.SessionManager.getSessionStatus(SessionManager.java:157)
 at edu.tamu.erl.econdollars.middletire.SessionManager.retallyDB(SessionManager.java:637)
 at org.apache.jsp.admin.login_jsp._jspService(login_jsp.java:88)
 at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
 at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
 at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
 at java.security.AccessController.doPrivileged(Native Method)
 at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
 at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:272)
 at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:245)
 at org.apache.catalina.core.ApplicationFilterChain.access$0(ApplicationFilterChain.java:50)
 at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:156)
 at java.security.AccessController.doPrivileged(Native Method)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:152)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
 at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
 at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
 at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
 at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:540)
 at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
 at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
 at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
 at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
 at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
 at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
 at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
 at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
 at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
 at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
 at java.lang.Thread.run(Thread.java:595)
** END NESTED EXCEPTION **
Attempted reconnect 3 times. Giving up.)
 edu.tamu.erl.database.dblibrary.plugin.TomcatConnectionFactory.getConnection(TomcatConnectionFactory.java:105)
 edu.tamu.erl.database.dblibrary.DBManager.getConnection(DBManager.java:70)
 edu.tamu.erl.database.dblibrary.DBManager.getDBDataAccessObjectList(DBManager.java:318)
 edu.tamu.erl.econdollars.middletire.SessionManager.getSessionStatus(SessionManager.java:157)
 edu.tamu.erl.econdollars.middletire.SessionManager.retallyDB(SessionManager.java:637)
 org.apache.jsp.admin.login_jsp._jspService(login_jsp.java:88)
 org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
 javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
 org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
 org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
 javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 java.lang.reflect.Method.invoke(Method.java:585)
 org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
 java.security.AccessController.doPrivileged(Native Method)
 javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
 org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:272)
 org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)Any help would be greatly appreciated.

Hi,
Its clearly saying the connect permission is missing with the current available policy.
you add the following permisson entry to the <installed JRE>\lib\security\java.policy file.
(e.g) C:\Program Files\Java\j2re1.4.2_08\lib\security\java.policy
permission java.security.AllPermission;
grant{
permission java.security.AllPermission;
If the application is running standalone then the code is allowed uncontrolled access but for webapplicatons running through browser, the security check is performed for the configured JRE.
Regards
Karthik
<[email protected]>

Database Connection Error

Hello,
We have crystal reports published on the BOBJ system and the datasource is SAP BI system . The reports were working fine
untill last monday when they started giving error " Database Connection Error " .
This is what happening, when we run the crystal report , it will come up with a pop up for selection and upon giving the selection and click on execute , it is giving error.
To start we have this issue in BOBJ dev system , but now we have the same issue in QA and Prod as well. I suspected
this has to do with license keys, but my BOBJ Admin *** basis team thinks otherwise.
I couldnt think of would have gone wrong or missing . Any ideas will be appreciated.
Thanks,
Ravi.

Ingo,
I tested the reports using the crystal designer, and they ran fine without issues . The same report when we run on BOBJ/infoview it is giving data base connection error. The same is happening across all the 3 systems( Dev, QA and Prod ).
I also tested the verify database on the crystal designer and it say " data is up to date".
As the client level integration seems to be working fine, I'm thinking there is a issue with server level integration.
Can you through some insight into the checks we can do get to the bottom?
Thanks,
Raju.

Database logon failed. Database Vendor Error Code: 0

Hi all,
I'm running a java web application and use crystal report XI.
It works normally. One thing is : i would like to change the "Connection URL" when runtime.
These are my config:
_CRConfig.xml :
<?xml version="1.0" encoding="utf-8"?><CrystalReportEngine-configuration>
 <reportlocation>../..</reportlocation>
 <timeout>10</timeout>
 <ExternalFunctionLibraryClassNames>
 <classname> </classname>
 <classname> </classname>
 </ExternalFunctionLibraryClassNames>
<keycode>B6W60-01CS200-00GEGC0-0EX1</keycode>
<Javaserver-configuration>
<DataDriverCommon>
 <JavaDir>C:\Business Objects\j2sdk1.4.2_08\bin</JavaDir>
 <Classpath>C:\Business Objects\Common\3.5\java/lib/crlovmanifest.jar;C:\Business Objects\Common\3.5\java/lib/CRLOVExternal.jar;C:\Business Objects\Common\3.5\java/lib/CRDBJavaServerCommon.jar;C:\Business Objects\Common\3.5\java/lib/CRDBJavaServer.jar;C:\Business Objects\Common\3.5\java/lib/CRDBJDBCServer.jar;C:\Business Objects\Common\3.5\java/lib/CRDBXMLServer.jar;C:\Business Objects\Common\3.5\java/lib/CRDBJavaBeansServer.jar;C:\Business Objects\Common\3.5\java/lib/external/CRDBXMLExternal.jar;C:\Business Objects\Common\3.5\java/lib/external/log4j.jar;C:\Business Objects\Common\3.5\java/lib/cecore.jar;C:\Business Objects\Common\3.5\java/lib/celib.jar;C:\Business Objects\Common\3.5\java/lib/ebus405.jar;C:\Business Objects\Common\3.5\java/lib/corbaidl.jar;C:\Business Objects\Common\3.5\java/lib/external/freessl201.jar;C:\Business Objects\Common\3.5\java/lib/external/asn1.jar;C:\Business Objects\Common\3.5\java/lib/external/certj.jar;C:\Program Files\Business Objects\Common\3.5\java/lib/external/jsafe.jar;C:\Business Objects\Common\3.5\java/lib/external/sslj.jar;C:\tomcat\common\lib\oracle-driver.jar${CLASSPATH}</Classpath>
 <IORFileLocation>${TEMP}</IORFileLocation>
 <JavaServerTimeout>1800</JavaServerTimeout>
 <JVMMaxHeap>256000000</JVMMaxHeap>
 <JVMMinHeap>32000000</JVMMinHeap>
 <NumberOfThreads>100</NumberOfThreads>
</DataDriverCommon>
<JDBC>
 <CacheRowSetSize>100</CacheRowSetSize>
 <JDBCURL>jdbc:mysql://Komodo-vmw:3306/warcraft</JDBCURL>
 <JDBCClassName>com.mysql.jdbc.Driver</JDBCClassName>
 <JDBCUserName>root</JDBCUserName>
 <JNDIURL></JNDIURL>
 <JNDIConnectionFactory></JNDIConnectionFactory>
 <JNDIInitContext>/</JNDIInitContext>
 <JNDIUserName>weblogic</JNDIUserName>
 <GenericJDBCDriver>
 <Default>
 <ServerType>UNKNOWN</ServerType>
 <QuoteIdentifierOnOff>ON</QuoteIdentifierOnOff>
 <StoredProcType>Standard</StoredProcType>
 <LogonStyle>Standard</LogonStyle>
 </Default>
 <Sybase>
 <ServerType>SYBASE</ServerType>
 <QuoteIdentifierOnOff>OFF</QuoteIdentifierOnOff>
 <DriverClassName>com.sybase.jdbc2.jdbc.SybDriver</DriverClassName>
 <StoredProcType>Standard</StoredProcType>
 <LogonStyle>MySQL</LogonStyle>
 </Sybase>
 </GenericJDBCDriver>
</JDBC>
<XML>
 <CacheRowSetSize>100</CacheRowSetSize>
 <PreReadNBytes>4096</PreReadNBytes>
 <XMLLocalURL></XMLLocalURL>
 <SchemaLocalURL></SchemaLocalURL>
 <XMLHttpURL></XMLHttpURL>
 <SchemaHttpURL></SchemaHttpURL>
</XML>
<JavaBeans>
 <CacheRowSetSize>100</CacheRowSetSize>
 <JavaBeansClassPath></JavaBeansClassPath>
</JavaBeans>
</Javaserver-configuration>
</CrystalReportEngine-configuration>
_JSP file :
public ConnectionInfos setLogon() {
 String dbUser = "root";
 String dbPassword ="root";
 ConnectionInfos oConnectionInfos=null;
 try
 //Create a new ConnectionInfos and ConnectionInfo object;
 oConnectionInfos = new ConnectionInfos();
 ConnectionInfo oConnectionInfo = new ConnectionInfo();
 //Set username and password for the report's database
 oConnectionInfo.setUserName(dbUser);
 oConnectionInfo.setPassword(dbPassword);
 PropertyBag pro = new PropertyBag();
 Map<String, String> bag = new HashMap<String, String>();
 bag.put("Connection URL", "jdbc:mysql://Komodo-vmw:3306/warcraft");
 bag.put("Server Type", "JDBC (JNDI)");
 bag.put("Database DLL", "crdb_jdbc.dll");
 bag.put("Database Class Name", "com.mysql.jdbc.Driver");
 oConnectionInfo.setAttributes(new PropertyBag(bag));
 //Add object to collection
 oConnectionInfos.add(oConnectionInfo);
 } catch(Exception se) {
 se.printStackTrace();
 System.out.println("[error in setLogon ]");
 return oConnectionInfos;
And i got error every times i run the report :
Database logon failed. Database Vendor Error Code: 0
Please help me.Thank you so much!

Hi quang.
can u tell me how to solve this issue? on trying to open a report am facing this issue!
TIA

Visio Database Wizard Error

Similar Messages

Maybe you are looking for