Error in last step of copy database wizard
Hi All,
I am getting below mentioned error in copy database wizard. I am using SSMS 2012 to copy a database from one server to another server using attach and detach method. Been stuck in this issue for quite sometime. Please provide your insights...
Event Name: OnError
Message: An error occurred while transferring data. See the inner exception for details.
StackTrace: at Microsoft.SqlServer.Management.Smo.Transfer.TransferData()
at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.TransferExtraObjectsViaSmoTransfer()
InnerException-->There is already an object named 'spt_values' in the database.
StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.SqlServer.Management.Smo.Transfer.ExecuteStatements(SqlConnection destinationConnection, IEnumerable`1 statements, SqlTransaction transaction)
at Microsoft.SqlServer.Management.Smo.Transfer.TransferData()
Operator: EMEA\INCHEJAI
Source Name: CDW_BIE-WV200_xxxx_xxxx_35
Source ID: {xxx-xxx-xxx-xxx-xxx}
Execution ID: {xxx-xxx-xxx-xxx-xxx}
Start Time: 24.09.2014 10:38:37
End Time: 24.09.2014 10:38:37
Data Code: 0
P.S - I am able to query and fetch the results for "select * from master.dbo.spt_values;"
in both my SOURCE and DESTINATION databases.
But the table name is not visible under System databases--> master --> Tables --> System Tables in my DESTINATION database alone.
Thanks,
DeeJay007
Hi,
Thanks for your response :). When I tried to attach the the database (.mdf and .ldf) and create a new database in DESTINATION server, it works fine. Only using "Copy database wizard" I face this problem. I am attempting this functionality from
the SQL Server 2012 instance
The Instances are not in same version. Find the specific details below for @@Version.
SOURCE Server Instance
Microsoft SQL Server 2008 (SP3) - 10.0.5500.0 (X64)
Sep 21 2011 22:45:45
Copyright (c) 1988-2008 Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.0 <X64> (Build 6002: Service Pack 2) (VM)
DESTINATION Server Instance
Microsoft SQL Server 2012 (SP1) - 11.0.3000.0 (X64)
Oct 19 2012 13:38:57
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
When you use the copy database functionality, your database gets upgraded to match the destination server version. The database cannot be downgraded, which is fine in your case. It could be a bug in the upgrade process between these two specific sql server
versions though.
Can you make a test with another destination instance, with the same version as the original destination (2012 SP1) just to rule out the possibility of system database corruption?
Does this happen with only a single database, or does the wizzard fail for any database you try to copy?
I have the "u_tables.sql" file which has the scripts for some master database tables. In the process of trying to rebuild the system database and if I lose the master DB contents, will executing the "u_tables.sql" be sufficient to restore
the details?? Many DB's are available in the server, so the risk is very high.
No. However, your application databases won't be affected. You'll lose all your server objects, including but not limited to logins, linked servers, backup triggers, server roles, etc. You'll also lose the contents of the msdb database (jobs, database mail
configurations, backup history, maintenance plans, etc). Please refer to the article I sent you for more information. It contains safety instructions on how to backup most of these objects.
Try to do the tests I suggested above before rebuilding your system databases.
Is there any restrictions for "Copy database wizard" which I am missing here?
No I dont think so. Based on the information you provided, it should be working.
Similar Messages
-
Copy Database Wizard error: Enumerate subsystems failed for JobServer
Hi, non-SQL person looking for some guidance. I'm trying to copy databases with permissions from a Win2008 server with SQL2008R2 to a Win2012 server with SQL2012. I'm running SSMS on the 2012 instance, and intiating the Copy Wizard from there. I'm getting
the following error. Thanks.
TITLE: Copy Database Wizard
Enumerate subsystems failed for JobServer 'Win2012serverSQL2012'.
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=11.0.3401.0+((SQL11_SP1_QFE-CU).140109-1303+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Enumerate+subsystems+JobServer&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The EXECUTE permission was denied on the object 'sp_enum_sqlagent_subsystems', database 'msdb', schema 'dbo'. (Microsoft SQL Server, Error: 229)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.3401&EvtSrc=MSSQLServer&EvtID=229&LinkId=20476TITLE: Copy Database Wizard
Create failed for JobStep 'NAME_CDW_2008ServerName_Win2012serverSQL2012'.
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.4000.0+((KJ_PCU_Main).120628-0827+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Create+JobStep&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The @flags parameter is not valid for a job step of type 'SSIS'. (Microsoft SQL Server, Error: 14545)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=11.00.3401&EvtSrc=MSSQLServer&EvtID=14545&LinkId=20476
BUTTONS:
OK
Hi scogordo,
From your description, are you using SSMS 2008 R2 to perform the copy action? I make a test on my computer, and get the same error as yours. To work around this issue, please use SSMS 2012 to copy database from SQL Server 2008 R2 to SQL Server 2012.
There is a feedback to Microsoft about the issue for your reference.
https://connect.microsoft.com/SQLServer/feedback/details/810037/copy-database-fails-when-copying-database-from-sql-server-2008-r2-sp2-to-sql-server-2012-sp1
Thanks,
Lydia Zhang -
2008 r2 Copy Database Wizard Error code 0x80004005 (login timeout expired).
While on copy database wizard, step Configure the package I
get this error:
while trying to find a folder on sql an ole db error was encountered with error code 0x80004005 (login timeout expired).
If I try to run it any way, I got the following in the Execute stage:
the job failed. check the event log on the destination server for details
In the destination server, job history:
Message
Executed as user: WORKGROUP\servername$. Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1
for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 3:26:57 PM Could not load package "package name omitted" because of error 0xC0014062. Description: The LoadFromSQLServer method
has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed. Source: Started: 3:26:57 PM Finished: 3:27:44 PM Elapsed: 47.83 seconds. The package could
not be loaded. The step failed.
I check the job permission with the integration service connection. try with default and with db_ssisadmin.
other info:
Source: Other SQL Server Version, Microsoft SQL Server Enterprise Edition , Build 1617, Microsoft Windows NT 6.0 (6002) NT INTEL X86
Destination: Other SQL Server Version, Microsoft SQL Server Data Center Edition (64-bit) , Build 1600, Microsoft Windows NT 6.1 (7601) NT
x64 Using SMO online transferHi kexinger,
This issue might be caused by the insufficient permission for the SQL Agent account, please check the SQL Agent service account has sufficient permissions to the various folders. For detail information, please take a look at the following article:
http://mattsql.wordpress.com/2014/01/06/quick-tip-could-not-load-package-xxx-because-of-error-0xc0014062/
If you have any feedback on our support, please click
here.
Elvis Long
TechNet Community Support -
SQL 2012 Copy Database Wizard fails
I am trying to use the Copy Database Wizard in SQL Server 2012
The host is running SQL Server 2000 (8.00.2066 (SP4)) on a Windows 2003 server
The destination is SQL Server 2012 running on Windows Server 2012 Standard.
Its gets to Execute SQL Server Agent Job and fails with this error:
The job failed. Check the event log on the destination server for details
Fails at – Execute SQL Server Agent Job
I've looked at the application log and not sure which errors are relevant. Here are two of them:
the first is an error, the second a warning.
Log Name: Application
Source: SQLISPackage110
Date: 1/9/2015 11:39:24 AM
Event ID: 12291
Task Category: None
Level: Error
Keywords: Classic
User: NT SERVICE\SQLSERVERAGENT
Computer: SQL2013
Description:
Package "CDW_SQL_SQL2013_7" failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SQLISPackage110" />
<EventID Qualifiers="16385">12291</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-09T16:39:24.000000000Z" />
<EventRecordID>456924</EventRecordID>
<Channel>Application</Channel>
<Computer>SQL2013</Computer>
<Security UserID="S-1-5-80-344959196-2060754871-2302487193-2804545603-1466107430" />
</System>
<EventData>
<Data>CDW_SQL_SQL2013_7</Data>
</EventData>
</Event>
Log Name: Application
Source: SQLSERVERAGENT
Date: 1/9/2015 11:39:26 AM
Event ID: 208
Task Category: Job Engine
Level: Warning
Keywords: Classic
User: N/A
Computer: SQL2013
Description:
SQL Server Scheduled Job 'CDW_SQL_SQL2013_7_1' (0xDFA5EEDDB2D53A4FB3C7CED04563896E) - Status: Failed - Invoked on: 2015-01-09 11:39:18 - Message: The job failed. The Job was invoked by User VGBtR3r0WgKjvthk. The last step to run was step 1 (CDW_SQL_SQL2013_7_1_Step).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SQLSERVERAGENT" />
<EventID Qualifiers="16384">208</EventID>
<Level>3</Level>
<Task>3</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-09T16:39:26.000000000Z" />
<EventRecordID>456927</EventRecordID>
<Channel>Application</Channel>
<Computer>SQL2013</Computer>
<Security />
</System>
<EventData>
<Data>CDW_SQL_SQL2013_7_1</Data>
<Data>0xDFA5EEDDB2D53A4FB3C7CED04563896E</Data>
<Data>Failed</Data>
<Data>2015-01-09 11:39:18</Data>
<Data>The job failed. The Job was invoked by User VGBtR3r0WgKjvthk. The last step to run was step 1 (CDW_SQL_SQL2013_7_1_Step).</Data>
</EventData>
</Event>
Any ideas would be appreciated. I'm anxious to retire this old SQL 2000 server!
MikeThanks David.
is this the log you are looking for:
Date 1/9/2015 11:39:18 AM
Log Job History (CDW_SQL_SQL2013_7_1)
Step ID 1
Server SQL2013
Job Name CDW_SQL_SQL2013_7_1
Step Name CDW_SQL_SQL2013_7_1_Step
Duration 00:00:08
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 11:39:18 AM Progress:
2015-01-09 11:39:18.61 Source: sql_SQL2013_Transfer Objects Task Task just started the execution.: 0% complete End Progress Error: 2015-01-09 11:39:24.50 Code: 0x00000000
Source: sql_SQL2013_Transfer Objects Task Description: An error occurred while transferring data. See the inner exception for details. StackTrace: at Microsoft.SqlServer.Management.Smo.Transfer.TransferData()
at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.TransferExtraObjectsViaSmoTransfer() InnerException-->The specified schema name "INFORMATION_SCHEMA" either does not exist or you do not have permission to use it.
StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject
stateObj, Boolean& dataReady) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1
completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SqlServer.Management.Smo.Transfer.ExecuteStatements(SqlConnection
destinationConnection, IEnumerable`1 statements, SqlTransaction transaction) at Microsoft.SqlServer.Management.Smo.Transfer.TransferData() End Error Progress: 2015-01-09 11:39:24.50 Source: sql_SQL2013_Transfer
Objects Task Database transfer failed for one or more extra objects.: 0% complete End Progress Progress: 2015-01-09 11:39:24.50 Source: sql_SQL2013_Transfer Objects Task
Transfer objects finished execution.: 100% complete End Progress Warning: 2015-01-09 11:39:24.52 Code: 0x80019002 Source: CDW_SQL_SQL2013_7 Description: SSIS Warning
Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change
the MaximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:39:18 AM Finished: 11:39:24 AM Elapsed: 6.062 seconds. The package execution failed.
The step failed.
I will also look into backup/restore. Will that work between 2000 and 2012? -
Contacts Management Tutorial -- MySQL error on last step!
I just completed the contacts management tutorial and in the final exercise using the QuB I get the following error:
"You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'ORDER BY name_con' at line 1"
This is interesting because you are instructed to remove the "ORDER BY name_con" from the SQL query (pg. 62) because, according to the author, "This step makes the query easier to view when you open MX Query Builder." Leaving the "ORDER BY name_con" produces the same result. Any ideas on why the error is generated? I was nearly done with my first ADDT tutorial and all had gone well up to this point!!!Hi Paul,
just a bit frustrated after a rather long session
yeah I understand this of course, but replies to whatever question may take some time, and - hey - we also had a weekend :-)
Any idea how to access the complete SQL query?
humm -- isn´t the complete query displayed close to the "You have an error in your SQL syntax..." error message ?
I've a feeling the "nulls" may be guilty
you can easily "debug" this by (temporarily) changing NOT NULL columns to NULL in the DB and hence get a clue whether this assumption is right or not.
However, I think it´s probably just a tiny syntax error, as that error message indicates -- what exactly appears directly preceeding the 'ORDER BY name_con' part of your query ?
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver -
Unable to copy database with different name in the same instance
I had a huge database and wanted to try some change optimization changes.
So wanted to make a copy of the database along with data in the same instance.
I have tried copy database wizard several times but always see the error as in attachment.
Can someone let me know how to troubleshoot further?
If this is not the correct way please suggest how do i copy a database with different name in the same instance along with data.Hi Nandu,
From the screenshot, the error 1813 happens when corrupt database log is attempted to attach to the SQL Server. To work around this issue, please preform the following steps, for more details, please review this
blog.
1. Create a new database with same name which you want to recover. Make sure that the MDF file and LDF file have same name with previous database data and log file.
2. Stop SQL Server. Move original MDF file from old location to new location by replacing just created MDF file. Delete the LDF file of new location just created.
3. Start SQL Server. At this point, the database is in suspect status.
4. Make sure that system tables of Master database allows to update the values. Please note that you will be performing this in query window.
Use Master
go
sp_configure 'allow updates',1
reconfigure with override
go
5. Change database mode to emergency mode.
SELECT *
FROM sysdatabases
WHERE name = 'DatabaseName'
BEGIN
UPDATE sysdatabases
SET status = 32768
WHERE name = ' DatabaseName '
COMMIT TRAN
6. Restart SQL Server. Then execute the following DBCC command in query window to create new log file.
DBCC TRACEON (3604)
DBCC REBUILD_LOG(databasename,'c:\yourdatabasename_log.ldf')
GO
7. Reset the database status using following command.
sp_RESETSTATUS yourdatabasename
GO
8. Turn off the update to system tables of Master database running following script.
USE MASTER
GO
sp_CONFIGURE 'allow updates',0
RECONFIGURE WITH OVERRIDE
GO
9. Reset the database status to previous status.
BEGIN
UPDATE sysdatabases
SET status = (value retrieved in first query of step 5)
WHERE name = 'DatabaseName‘
COMMIT TRAN
GO
Make sure that you have done all the steps in order and restarted SQL Server where it is mentioned. Also run SQL Server Management Studio as administrator.(Right click-> Run as Administrator)
Thanks,
Lydia Zhang -
" The job failed" in copying database SQL SERVER 2012
I'm trying to copy a database. When going through the Copy Database Wizard, I'm getting a Execute SQL Server Agent Job error. The error states " The job failed. Check the event log on the destination server for details". See below:
Performing operation
Add log for package (Success)
Add task for transferring database objects (Success)
Create package (Success)
Start SQL Server Agent Job (Success)
Execute SQL Server Agent Job (Error) Messages
The job failed. Check the event log on the destination server for details. (Copy Database Wizard)
I can't seem to find what causing this problem. Am I using the correct approach? I just need to copy this database. Thank in advance.Hi mohammad2050,
When using Copy Database Wizard, please make sure that the SQL Server Agent account or Integration Services Proxy account is a member of sysadmin fixed server role, and has access permission on both of source and target file system.
There is a blog about using SQL Server Copy Database Wizard for your reference .
http://reddy25.blogspot.com/2013/12/copy-database-from-one-server-to.html
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support -
Database restore; database recover; Last step?
Ok, this is my first try with rman to restore and recover from tape.
My restore database finished successfully...no errors.
My recover database finished successfully...no errors.
Now...what is my last step?
Do I shut down and open back up normally, or, do I need to do something like shut down, then open with reset logs?
I'm guessing a full database backup after this re-opening would be a good idea too, no?
Thank you,
cayennesybrand_b wrote:
I wonder: why do you specialize in asking so called 'doc questions'?
Can't be bothered to read documentation?
Boss doesn't pay you for reading documentation?
Think this is a chat room?
Kindly stop posting doc questions. It violates the Forums Etiquette.
Sybrand Bakker
Senior Oracle DBABecause I didn't see anything that specifically addressed what I've had to go through in recovering this database in the document or examples I've seen or could find.
And was wanting to just make sure since I was so close, didn't want to mess anything up at the last moment.
No need to be snippy about it...everyone else is happy to give some advice and help to someone who is obviously a noob at much of this and learning as he goes.
Hoping as I learn things better...that I can helps someone else, not to mention, that searching the forums, someone might run into a weird set of circumstances like I have on this and a couple other things.
You know the old saying..."if you don't have something nice to say, then...."?
Thanks to all for all the help, I think I'm up and going again now.
C -
Steps to Copy a Database in SAP
Hi,
What are the steps to copy a database in SAP?
Thanks,
Sreekar.Hi,
The steps of database copy are as below.
1. To make Database copy between two systems, you have to check file size on
Target System.
Use commands:
df -k
bdf (HP-UX)
2. On the Source System, check the files which are going to move.
Use commands:
su ora
svrmgrl
connect internal;
select name from v$controlfile;
select name from v$datafile;
select name from v$logfile;
3. Release all change requests on source system.
4. Shutdown database (Source system)
Use commands:
su - adm
stopsap
5. Copy the controlfiles, datafiles, logfiles from source system to target
system.
Backup via tar
ftp or rcp
For example: You can write a simple script.
rcp r src_server:/oracle/SRC/sapdata1 /oracle/TRG
rcp r src_server:/oracle/SRC/sapdata2 /oracle/TRG
rcp r src_server:/oracle/SRC/sapdata3 /oracle/TRG
or for backup
tar cvf /dev/ sapdata* dbs origlog* mirrlog*
6. Copy $Oracle_Home/dbs/init.ora parameter file from source system to
target system. Change all old SIDs to new SIDs except db_name parameter.
Save it with old SID name.
7. On the target system, change parameter /dbname= on
parameter file /usr/sap/trans/bin/TPPARAM
8. Change all owners and groups.
Use commands:
With root user.
cd /oracle/
chown R ora:dba sapdata*
chown R ora:dba origlog*
chown R ora:dba mirrlog*
9. Change the name of control files (cntrl.dbf) with new SID
10. Startup mount must work successfully.
Use command:
su ora
svrmgrl
connect internal;
startup mount;
11. Define new locations to database for data files and log files.
Use command:
su ora
svrmgrl
connect internal;
alter database rename file /old/file/name to /new/file/name;
12. Startup R/3 with startsap.
Use commands:
su - adm
startsap
13. If not start; see OSS note--> 8179 (grant connect to sapr3 identified by SAP)
14. Log on to SAP via SAP* user.
15. Run ST06 and set workbench organizer.
16. Install new license.
17. Change the spool server names on SAP system. (SPAD)
Reward points if found helpfull...
Cheers,
Siva. -
Errors in few of the step while running configuration wizard for PI 7.0
hi all,
i have installed Netweaver 2004s (PI 7.0) quality. during installation i had chosen sld option to be my development system as i wanted to use just single SLD.
now for the post installation steps i had run Configuration wizard. i haven't yet implemented Note : 939592 : PI Usage configuration versus Central SLD as it says first i need to perform all CTC steps.
now in this i got error in few steps:
STEP1 : PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage
the error was: CIM_ERR_FAILED: Object manager is not activated
PI_05_This wizard will configure the integration server for sld.
The error was:
Error: CIM_ERR_FAILED: User credentials are invalid or user is denied access
PI_09_This wizard will configure Role of Integration server
Not able to load function SXMB_SET_ROLE_TO_IS( Connect to SAP gateway failed).
What should i do?
Regards,
Priyanshu SrivastavaHi Priyanshu,
"Object manager is not activated" simply means, that the SLD server is not started. So, please, first of all navigate to the SLD URL http://<host>:<httpport>/sld, login with an administrative SLD user -> Admininstration and push the star button.
Regards,
Blanca -
I just purchased Adobe Acrobat XI Pro, but installation didn't work. At the last step said that it'd fund an error. Any idea? How i can contact Adobe support? I have a new Macbook Pro Yosemitte ..
Hi Francis,
Could you please let me know how have you been trying to install Acrobat?
Please ensure that you are signed in as admin and antivirus software is disabled at the time when you install.
Regards,
Anubha -
Here are the environmental details:
SQLDeveloper 32-bit Version 3.2.20.09 (Build MAIN-09.87)
Oracle Database: 12C single instance (no RAC)
Oracle client: 12C 32 bit
Windows 64 bit desktop
I am attempting to migrate an MS Access application to Oracle. I pick the ‘Migrate’ selection from the ‘Tools’ Menu SQL Developer. This puts me into the Migration Wizard. When I get to the ‘Source Database’ step of the migration wizard, the ‘Choose the Third Party database from which you are migrating’ drop-down box is not being populated with the current available connections. It is empty. If I type a valid connection name into the box, SQL Developer takes it on this screen but does not keep it for the next screen/step. It has no persistence. I even tried to make sure that each connection was open/connected before beginning the migration process.
Due to the fact that I am attempting to migrate an MSAccess application, I am mixing 32-bit and 64 bit software. This may be the issue as to why the drop down is losing addressability. I have not applied any patches to this version of SQL Developer.Hi,
If you need easy way to migrate Microsoft Access to Oracle probably it is more reasonable to review some tools specially designed to this purpose. For example:
Access to Oracle converter by Intelligent Converters
Access to Oracle converter by SpectralCore
Access to Oracle converter by Interface Computers
Hope, this will help.
Sincerely,
Vlad -
Payment Wizard last step did not pop-up docu printing
What caused this issue, when I tested Payment Wizard the whole cycle, the last step did not launch to "Document Printing"?
I only can print those checks from banking> Document Printing. Anyone has same problem like this?Hi Suda,
I checked the "Execute" since I reviewed the detail and want to print the checks at once. Tks. -
Some errors after doing the system copy for DB2 database instance
HI,
Recently we have transferred the DB2 database instance from old host( db 9.1.7 under windows 2003 R2) to new host( DB2 9.7.9 under windows 2008 R2) using the system copy database depending methods.
Currently system is:
* ECC 6.0 under NW 7.0 SR3
* Kernel : 7.20
* Basis: 7.0 with support package level 17
*application instance connecting db instance via DB2 CLI
1) a) After log in system using the T-code: SM21 to read the system log, it will record the bellow error:
b) From the log taken from log fie: dev_w*, i also found the below error:
A ABAP Program SAPMSSY2 .
A Source RSBTCTRC Line 60.
A Error Code DBIF_RSQL_SQL_ERROR.
A Module $Id: //bas/720_REL/src/krn/runt/absapsql.c#28 $ SAP.
A Function ab_HandleRsqlErrors Line 716.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A SQL error in the database when accessing a table..
c) any background job will be cancelled when it is running. I think the error is related to above mentioned issue.
2) If i go to T-code: DB13---Diagnostics----db2 logs, it will come out the below error:
Thanks.HI Manas,
Yes, this problem is with particular this table.
Refer to below error coming from db2diag.log when i access the table:BTCCTL:
2014-08-12-17.52.08.866000+480 I35784932F1196 LEVEL: Severe
PID : 3380 TID : 2676 PROC : db2syscs.exe
INSTANCE: DB2DV1 NODE : 000 DB : DV1
APPHDL : 0-127 APPID: *LOCAL.DB2DV1.140812095207
AUTHID : DB2DV1
EDUID : 2676 EDUNAME: db2agent (DV1) 0
FUNCTION: DB2 UDB, data management, sqldSetupIndexScan, probe:1873
MESSAGE : ZRC=0x82040001=-2113667071=SQLD_NONSEVERE_PRGERR
"non-severe dms programming error"
DIA8532C An internal processing error has occurred.
DATA #1 : String, 39 bytes
Specified index not found for scan open
DATA #2 : String, 12 bytes
sqldScanOpen
CALLSTCK:
[0] 0x000000018010E989 pdLog + 0x353
[1] 0x0000000003ABE3C2 sqlzSetAndLog901 + 0x192
[2] 0x0000000001E61F01 sqldSetupIndexScan + 0xF37
[3] 0x0000000001E5F5CC sqldScanOpen + 0xBEE
[4] 0x000000000334F460 sqlriopn + 0x316
[5] 0x00000000034AE788 sqlritaSimplePerm + 0x252
[6] 0x000000000336AC8B sqlriSectInvoke + 0x139
[7] 0x00000000030A6F0C sqlrr_process_fetch_request + 0x1A8
[8] 0x00000000030A2902 sqlrr_open + 0x534
[9] 0x000000000223FCCB sqljs_ddm_opnqry + 0x447
2014-08-12-17.52.08.866000+480 I35786130F533 LEVEL: Error
PID : 3380 TID : 2676 PROC : db2syscs.exe
INSTANCE: DB2DV1 NODE : 000 DB : DV1
APPHDL : 0-127 APPID: *LOCAL.DB2DV1.140812095207
AUTHID : DB2DV1
EDUID : 2676 EDUNAME: db2agent (DV1) 0
FUNCTION: DB2 UDB, data management, sqldSetupIndexScan, probe:1873
DATA #1 : unsigned integer, 4 bytes
10
DATA #2 : unsigned integer, 4 bytes
1704
DATA #3 : unsigned integer, 2 bytes -
Jdev10.1.3 - error in the last step of Sample Databound cuecard example
Hello
I am trying to execute the last step in Sample Databound cuecard example i,e 'Add a Field for the parameter value'. in the output browser when i am entering the 'sh' in to the input text field and when i click the 'FindContactsByName' button i am not getting the names containig 'sh'in the table component of the same page.
If any of you are the aware of this error ..Please help me how to overcome this error.
I appriciate all your time and patience.
ThanksHello
I am trying to execute the last step in Sample Databound cuecard example i,e 'Add a Field for the parameter value'. in the output browser when i am entering the 'sh' in to the input text field and when i click the 'FindContactsByName' button i am not getting the names containig 'sh'in the table component of the same page.
If any of you are the aware of this error ..Please help me how to overcome this error.
I appriciate all your time and patience.
Thanks
Maybe you are looking for
-
Looking for my MacBook pro?
I just lost my MacBook pro for a week now...
-
Captivate 5.5 variables in AS3
Hi, i seem to be having a problem accessing the captivate 5.5 variables in AS3. I saw guides that tells people to do something like var myRoot:MovieClip = MovieClip(root); var mainmov:MovieClip = MovieClip(myRoot.parent.root); mainmov.rdcmndPause = 1
-
Hello Gurus, I need to create an Export using a different sort order than the Core.SortOrder. I think I can set up a couple of new properties - one for the Sort Property (SORT_B) and one to collect the sort values (using the SORT data type). I'm no
-
IPhoto Slideshow Music Settings Issue
I'm having an issue with Slideshows in iPhoto where there will be a long list called "Folders" when I am setting up the music. This happens in both the actual Slideshow and the creating of a Slideshow. I've installed iPhoto on 3 other computers and a
-
Calling Dialog from a dialog- size constraints
Hi, I am using Jdev version 11.1.1.7.1. I am calling a taskflow and running it as a dialog. I have a requirement to call another taskflow which runs as dialog from this dialog. When I do so, my child dialog is restricted within the parent dialog spac