Vista laptop and Arch Linux laptop competing for an IP address

Well, when I turn on my mom's Windows Vista: Home Premium laptop at any time while my Arch Linux laptop is on, Windows says that there are two machines using the same IP address shortly after her computer connects to the router, and then it boots my Linux notebook off of the router and cuts it off from wireless. Is there any way to prevent this? We are both using DHCP.
Specs:
Router: Linksys WRT54G
IP: Dynamic, DHCP
Note: I connect to the router fine when her laptop is off, but I am forced to use a 25FT LAN Cable to get Internet when she is on.
Last edited by kr0n05931 (2009-03-24 00:52:27)

Fight! Fight! Fight! Don't take that crap, Arch!
Anyways. I'm guessing something's messed up with your router. It should be making sure no two devices get the same IP. Worst case, you could give one or both a static IP -- I do this all the time anyways, because it's easier to work with.

Similar Messages

Dual boot Windows 7 (64) and Arch Linux (64) problems

Hello:
I am new to Arch Linux and just finished installing the 64bit on my laptop. It had a prebuilt Windows 7 (64) installed which I kept but split the hdd from 160Gb to 80Gb and 80Gb. I installed Arch there and set 4 partitions, all of them as Logical - a 64 MB ext2 /boot partition; a 512 MB swap partition; a 15 GB root partition; and the rest as my /home partition. My partitions look like this:
Disk Drive: /dev/sda
Size: 160041885696 bytes, 160.0 GB
Heads: 255 Sectors per Track: 63 Cylinders: 19457
Name Flags Part Type FS Type [Label] Size (MB)
sda1 Primary Unknown (27) 12889.02
sda2 Boot Primary NTFS 106.93
sda3 Primary NTFS [] 73915.11*
sda5 Logical Linux ext2 65.81*
sda6 Logical Linux 509.97*
sda7 Logical Linux ext2 15002.92*
sda8 Logical Linux ext2 57549.55*
The install was succesful(this was running from the core install cd) and I installed GRUB to my /boot but when I restarted it loaded Windows 7. I have used Knoppix USB disc to boot and see my Arch Linux install files and edited the /boot/gur/menu.lst file.
In Windows I installed EasyBCD 1.7.2 and tried to get NeoGrub bootloader working as a dual boot. I tried getting rid of the boot flag for Windows with cfdisk and setting it to my (Logical) sda5. That did not work. So far the only way I have booted into my Arch Linux install has been by going to the Live CD, choosing "Boot from Existing Linux Install" and editing the command files there.
root (hd0,4)
kernel /vmlinuz26 root=/dev/sda3 ro
initrd /kernel26.img
My goal is to get a dual boot working for Windows 7 and Arch Linux 64 and continue installing the Xorg and KDE to Arch. I just don't know what the problem is here. I don't mind reinstalling Arch if something went wrong, but I would like to keep my Windows running in order and add Arch on.
Any help would be greatly appreciated.

I ran the LiveCD and chose "Install to MBR hd0". I ended up with this:
setup hd(0,1)
Checking if "/boot/grub/stage1" exists.....yes
Checking if "/boot/grub/iso9660_stage1_5" exists.....yes
Running "embed /boot/grub/iso9660_stage1_5 (hd0,1)".....failed(this is not fatal)
Running "embed /boot/grub/iso9660_stage1_5 (hd16)".....failed(this is not fatal)
Running "install /boot/grub/stage1 d (hd0,1) /boot/grub/stage2 p (hd0,1) boot/grub/menu.lst".....failed
Error 31: File is not sector aligned
My entry for Windows into the menu.lst looks like this:
# (0) Arch Linux x64
title Arch Linux x64
root (hd0,4)
kernel /vmlinuz26 root=/dev/disk/by-uuid/3841273c-d91e-41d6-9dbf-716a15d03a01 ro
initrd /kernel26.img
# (1) Arch Linux x64
title Arch Linux x64 Fallback
root (hd0,4)
kernel /vmlinuz26 root=/dev/disk/by-uuid/3841273c-d91e-41d6-9dbf-716a15d03a01 ro
initrd /kernel26-fallback.img
# (2) Windows 7
title Windows 7
rootnoverify (hd0,0)
makeactive
chainloader +1

Rubix - yet another distro based on Slackware and Arch Linux

Today I was reading DistroWatch and saw info about Rubix.
This distro is based on Slackware and Arch Linux.
What do you think about this?

I tried it.
I really liked the install. Very simple and straightforward.
I didn't like fact that the rubix installer installs only one package at a time (and pulls in the deps of course), so the install is rather slow.
I also didn't like the repo structure. Seems cumbersome.
bonuses:
e17 installed easy, and just worked.
packages available are pretty reasonable
I really like the modifications rubix has made to rc.conf and some of the inits
There is some type of community repository
The distro seems to have a clear focus, and I like many of the security aspects.
bummers:
extra rc<int>.d directories
No gdm. boo-hiss.
No gnome (I get it. this is slackware. boo-hiss).
My fonts looked ugly. This one is such a huge deal for me, that I consider it a showstopper. Might be the fact that I installed it in vmware, but most distros have little issue with this. <caveat. I think arch fonts suck too. I have never had good looking fonts in arch...which is why I have only really used it as a server.>
Did I mention I didn't like the repo structure? It made the simple act of updating pacman repos (pacman -Sy) slow and painful.

Windows XP and Arch Linux

How do I install both Windows XP and Arch Linux on my system? I want to be able to boot either of the two from a menu that loads after the bios. I have created 4 partitions (NTFS, linux root, linux swap, linux home) and installed Windows XP on the NTFS system, as well as Linux on the other partitions. How do I go about the booting process? Are there any better ways of doing this than as above?
Kirk
PS How do I make a user supervisor in Arch Linux? When I try and reboot under my made user, I do not have sufficient rights.

kirkl_uk wrote:How do I install both Windows XP and Arch Linux on my system? I want to be able to boot either of the two from a menu that loads after the bios. I have created 4 partitions (NTFS, linux root, linux swap, linux home) and installed Windows XP on the NTFS system, as well as Linux on the other partitions. How do I go about the booting process? Are there any better ways of doing this than as above?
Just add the following in your /boot/grub/menu.lst
# (1) Windoze XP
title Windows XP Professional
root (hd0,0)
makeactive
chainloader +1
I assume from your description that you installed XP on the 1st partition of your 1st disc. If not, replace hd0,0 according to your setup.
kirkl_uk wrote:PS How do I make a user supervisor in Arch Linux? When I try and reboot under my made user, I do not have sufficient rights.
Just add that user in the root group in /etc/group. Or you can install sudo & 'man sudo' for details.
However, believe me, you don't want to do something like that. In windoze if you try to delete, ie the windows folder through explorer it'll stop you, pointing that this is evil. In linux you can easily call a 'rm -rf /' (as root) and wipe your disc out .
So better stick to a non-root user for everyday usage and su (or sudo) when you need root-access for a task.

Hi emm when i go onto imessage and facetime it asks me for my email address and password and i put it in then i wait 2 mins then it says please check your network and then try again then i check it and it is fine plz what do i do?

Hi emm when i go onto imessage and facetime it asks me for my email address and password and i put it in then i wait 2 mins then it says please check your network and then try again then i check it and it is fine plz what do i do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Parallels and Arch Linux

I am running windows xp on my laptop. Its a work laptop so i am sorta stuck with xp. It has parallels on it. Can i run Arch Linux successfully under parallels? I kow its not on the approved guest os list, but then again, the only ones they list are the "for noobs" distros. I dont see why it wouldn't work but i just thought i would check it out before going through the install and being disappointed. I wish my company would just go linux already and stop all the evil!

Following the wise words of the good people over on this thread:
http://bbs.archlinux.org:80/viewtopic.php?id=65114
who think that I (and all the others who suggested using virtualbox) are complete .... lets say ... dorks, I will repost with what I hope you (the op) might consider a more helpful (and they, a more acceptable) response. So here it is, my revised response.
I have absolutely no idea if it will work. I've never tried installing arch with parallels, But I have tried installing quite a few dozen other flavours of linux on parallels and never had a problem getting them to install. Despite the fact that there is no explicit mention of arch on the 'approved guest os list', I imagine it would work just fine like all the other linux distros that ARE explicitly mentioned.
If you do decide to put your cd/dvd in the drive and try and install arch under parallels, then please post back here so that the next person that asks the same question can be given an explicit yes or no answer.
@Allan (Forum Moderator from the unhappy thread) Please don't ban me for my unacceptable original response. I promise I wont ever say anything ever again.
Last edited by tim (2009-02-11 14:01:46)

Installing Multiple Operating Systems with grub and Arch Linux

NOTE: Please keep in mind that there are many different ways to achieve this same result using various loop and ramdisk methods, read this with a separate window to jot down your comments and suggestions... this is ongoing for me so any help would be appreciated!
Read the full article at Install Multiple Os without cds
This is my first post and I plan on making this topic an official HOWTO with www.tldp.org.
I have been into the computer security scene since 1990, but I realized that I had very little experience with the various LInux, Unix, and alternative Operating systems out there.
I have a CD-RW drive but being a struggling computer security researcher I had no money for blank cd-recordables. What follows is how I managed to install various operating systems on my computer (1 hard drive) without having to burn to a CD the ISO and then boot from that.
I first partitioned my 120GB harddrive into 10 partitions, the 2nd partition is a small swap and the last partition is extra large because it holds all the ISO images..
I then wrote a small shell script to automatically download (I love wget!) the following.
OpenBSD
IpCOP
Libranet
Arch-Linux
Fire
Local Area Security
Packet Master
Devil-Linux
FreeBSD
Knoppix
Helix
Gentoo
Yoper-Linux
NetBSD
RedHat
Slackware
The script also downloaded Installation manuals and md5 checksums.. (let me know if I should post... its pretty unsophisticated
I installed Slackware (personal favorite) on hda1 using my last blank CD-R, note that I do not have a separate boot partitino. (Should I?). I also installed grub on the MBR. I love grub, if you read through the man pages and all info you can find about grub, you can learn a whole lot. Grub has much more features and capability than lilo, even though lilo comes installed by default with slack.
I organize my kernel situation as follows... In my /boot directory, I mkdir KERNEL, CONFIG, MAP, INITRD and that is a good way for me to keep my kernels and everything organized.. Another good way is a separate dir for each new kernel.
Since Arch-Linux is a solid distro, I'll use that as a first example.
Here is the Arch-Linux section of my shell script
goge Arch-Linux
$w http://puzzle.dl.sourceforge.net/sourceforge/archlinux/arch-0.6.iso
$w http://unc.dl.sourceforge.net/sourceforge/archlinux/arch-0.6.md5sum
$w http://www.archlinux.org/docs/en/guide/install/arch-install-guide.html
md55
cat arch-0.6.md5sum
md5sum arch-0.6.iso
md55
The first thing to do is to mount the downloaded ISO image so we can use it as if it were an actual CD.
mount -t iso9660 -o ro,loop=/dev/loop0 cdimage /mnt/cdrom
Where cdimage= the ISO image. EX. /usr/local/src/ISO/Linux/Arch-Linux/arch-0.6.iso
This mounts the iso as /mnt/cdrom.
Next you need to copy /mnt/cdrom to a separate partition for the booting process. So mkfs.ext2 /dev/hda9. ( I prefer reiserfs or even XFS to ext but if you use something other than ext2 you could run into some problems because some of the installation kernels and initrds don't include support for reiserfs and so can't recognize the files. Although you could use mkinitrd to create a new initrd with reiserfs support, that might be pushin it IMO... I use the 9th partition consistently for this. I know there is a "right" way to copy the /mnt/cdrom files so everything stays the way it is supposed too, using tar or cpio, but I'm lazy so I just do cp -rp.
(What is the tar or cpio commands to copy with correct permissions etc??)
So you mount the 9th partition as whatever, say /mnt/hd and then copy the files. Now what?
Now edit your /boot/grub/menu.lst file to include the specific options to boot arch-linux installation.
A good idea is to find the isolinux.cfg file somewhere on the distro cd, this will tell you what to include in the menu.lst.
Here is the section in my menu.lst
title Arch Install
root (hd0,8)
kernel /isolinux/vmlinuz load_ramdisk=1 prompt_ramdisk=0 root=/dev/rd/0
initrd=/isolinux/initrd.img
This should be self-explanatory. The root (hd0,8) is pointing to partition 9. So the rest of the commands start from partition 9.
When you experience problems, remember you can always edit the grub boot options by typing 'e' and then edit the section. Also, a good idea is to include several variations in your menu.lst so you can easily try other ways to boot efficiently. And, remember to read up on all the installation guides that come with your distro, specifically, hard-disk installs.
There are special cases, Gentoo, has a semi-new compressed filesystem called squashfs. BTW, this is AWESOME, so check it out. It has to be compiled into the kernel, so some work is in order, but use this recompile to optimize your kernel. You can get the squashfs patch for almost any kernel. I use the latest stable 2.6 kernel. Squashfs is incredible and although I don't think you need it to install from ISO, you do need it to expand the livecd.squashfs filesystem that comes with the cd.
Heres a sample Gentoo section from my menu.lst
title Gentoo Install
root (hd0,8)
kernel /isolinux/gentoo root=/dev/ram0
initrd=/isolinux/gentoo.igz init=/linuxrc acpi=off looptype=squashfs loop=/livecd.squashfs cdroot vga=791 splash=silent
A nother' tip is the shell that is provided if you experience problems, typically busybox or ash. The key tools to get you going from here is mount and chroot. Sometimes you will need to manually create a simulated file system and then chroot into it. For instance, you might have to create boot, etc, bin, directories on the target partition.
I generally install each OS onto the next partition (careful of the logical partition) and add it to my menu.lst after install. A good idea is after installation, copy the kernel and initrd(if there is one) to the slackware(or whatever) boot partition on hda1. I copy kernels to /boot/KERNEL/ and initrd's to /boot/INITRD, then menu.lst is more organized...
You then need to add an updated section to your menu.lst (just comment out the install section for later)
Here is the finished arch-linux section from menu.lst
title Arch Linux 6
root (hd0,2)
kernel /boot/vmlinuz26 ro root=/dev/hdc3
This doesn't use my convenient boot/KERNEL/vmlinuz26 as you can tell by setting the root to partition 3.
***NOTE: Make a backup of MBR using dd and save to floppy, also backup the partition table to floppy, using cfdisk or parted. And boot disks (I use 1 with grub, and 1 with slack, and tomsbootdisk) will invariably come in handy. Tomsbootdisk is recommended, and make the grub boot disk when you install grub. install to floppy.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The final result after some fun experimenting, is when I boot, I have a cool grub boot screen come up with the option to boot into whatever OS I want, this is handy for multiple reasons. One good thing to do after this is to port scan and vuln scan each OS, after you update of course. Write this stuff down and you will know the weaknesses/strengths of the various OS's.
I can boot a custom Firewall, snort, or multiple honeypots using this procedure, as well as a graphical kde environment with a kernel optimized for graphics and my processor/architecture, or an environment devoted to forensics or even an environment suitable for programming.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
P.S. Some of the cooler alternative operating systems are BeOS 5, EOS, ER_OS, V2_OS, and my personal favorite Menuet. Menuet is 100% assembly graphical operating system that fits on a floppy. Its f'in money!
This should be a good enough example to get you started, this kind of thing should be learned and not just copied... Knowing how to do this stuff could prove to be exceptionally useful...

Start by reading all the articles built-in on your Mac - Help > Mac Help, search "printer sharing."
http://desk.stinkpot.org:8080/tricks/index.php/2008/04/how-to-print-to-a-cups-se rver-from-mac-os-x/
http://www.macosxhints.com/article.php?story=20080324224027152&query=share%2Bpri nter
http://members.cox.net/18james/osxprintersharing.html
http://ubuntuforums.org/archive/index.php/t-56940.html

Sent laptop in for repair, the address given was WRONG!

I sent my laptop in for repair the begining of February. When I recieved the box to ship my laptop off it came with instructions on packaging and shipping procedures. The address I was given to sen my laptop said is it an HP Repair Center and has been recieved at this address and sign for per tracking number, Hp says they have not recieved it, because it is not at the right location. I call every 24-48 hours as directed for a solution to this problem as I am told.
I always wanted an hp laptop. Never could afford one and received this as a christmas present. I am so upset about this and Im getting very frustrated! I did exactly as the instructions said and sent it where is said to be sent and no one is helping with this issue. I still have the instruction paper that states the address but keep getting told it is not a repair center and that it is the wrong address.
I was told over and over not to send it in for repair because there are always issues with something happening to peoples products, but I took the chance anyways. I really wish I didn't now!!!
WHAT DO I DO??? PLEASE HELP!!!

@meljohnston ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Thank you for visiting the HP Support Forum.
I work for HP. However I speak only for myself, not for HP nor anyone else

[Solved]dual boot windows 7 and arch linux

I have successfully installed arch linux dual boot with the original win7 on my PC. If I only use linux, then the system works well. The problem is that once I boot into Win7 then after reboot, the linux boot manager will stop working and the system always boots into windows automatically. My guess is Win7 automatically repair the boot loader.
My current solution is whenever I have finished using Windows, I'll boot with my linux USB installation, and run "gummiboot --path=/boot install". Afterwards, linux will work fine. But I believe there must be a better solution. Any help will be appreciated.
I have UEFI board by the way.
Last edited by jl2014 (2015-04-19 17:35:57)

Thanks for all your help first! I have tried Head_on_a_Stick's suggestions as the first step. Here is what I did. I have created :
$ cat /boot/loader/entries/windows.conf
title Windows
efi /EFI/hidden/Boot/bootmgfw.efi
The window boot path was :
/boot/EFI/Microsoft/Boot/bootmgfw.efi
and I changed
/boot/EFI/Microsoft
to
/boot/EFI/hidden
After reboot, I clicked 'Windows' option on the linux boot manager. Below are the error messages:
Windows failed to start.
File: \EFI\Microsoft/Boot/BCD
Info: An error occurred while attempting to read the boot configuration data.
Any idea what goes wrong?
I'll try other suggestions soon. Thanks all of you again.
Last edited by jl2014 (2015-04-19 00:03:33)

Dual booting Windows 8 and Arch Linux with UEFI

Hi all!
I'm trying to install Arch Linux on my computer where I already have Windows 8, and I'm getting a little stuck when it comes to the partitioning.
Following the beginner's guide and the method here: https://wiki.archlinux.org/index.php/Un … n_in_Linux for setting up the partitions properly, regarding UEFI. My problem is that when using cgdisk to set up a new EFI system partition (ef00), I get an error message when trying to write the partition table (just saying that something went wrong). I figure the problem is that I already have a partition like this (correct me if I'm wrong), but it really looks like it succeded (see info below). So my question is: How do I preceed to keep my Windows 8 installation happy, but installing Arch? Do I remove the old EFI system partition and create a new one, or is there some method that allows me to edit the already existing one, to allow me to dual boot Windows 8 and Arch?
My partition table now looks like this:
Part. # Size Partition Type Partition Name
1007KB free space
1 500MB Windows RE Basic data partition
2 300MB EFI System EFI system partition (this one was already present on my system)
3 128MB Microsoft reserved Microsoft reserved partition
4 63.5GB Microsoft basic data Basic data partition
8 512MB EFI System EFI System partition (this is the one I tried to create when I got the error message)
5 29.5GB Linux filesystem Arch (this is where I was going to put my Arch installation)
6 22GB Windows RE Basic data partition
7 1024MB Windows RE Basic data partition
615KB free space
Just for the record; I only created partition #8 and #5.
Any help is appreciated! And sorry for beeing a total noob, but I really suck at this.

sudo make sandwich wrote:If it is possible to share ESP between OSes, how do I do this (would it be sufficent to follow this section: https://wiki.archlinux.org/index.php/Beginners'_Guide#For_UEFI_motherboards)?
There's really very little to do to share an ESP between OSes. Most OS installers will auto-detect the ESP and use it. Problem solved. For Arch it may be a bit more effort just because Arch uses a more hands-on installation process, but I've only done a couple of Arch installations, and the last one was several months ago, so I don't recall the details clearly enough to comment.
And how big will the partition need to be? The beginner's guide says 512MB or higher.
I don't know what was in the mind of the author, but my guess is that's because that's roughly the cutoff point where mkdosfs starts creating FAT32 by default rather than FAT16. The ESP is officially supposed to be FAT32, not FAT16, although FAT16 usually works OK. It's also possible to create FAT32 on smaller partitions by using an explicit option to mkdosfs ("-F 32").
The optimal size of the ESP depends on the files stored on it. If you don't store your Linux kernels, something as small as 100MiB is usually adequate; but a few Linux kernels and their initrd files can consume twice that amount. My own recommendation is for the ESP to be 200-500MiB.
The only error message I got from cgdisk is "Problem saving data! Your partition table may be damaged!", however booting Windows again works fine. Parted did not complain about antything.
Use the "verify" function in cgdisk. That will reveal any problems with the data structures. If a verify turns up OK, then that means that cgdisk ran into some sort of disk problem. Running gdisk rather than cgdisk and using the gdisk "w" option (without making any changes) may produce a more helpful error message.

Accessibility and (Arch)linux

From slahdot:
"The strongest push-back against Massachusetts' effort to institute open, non-proprietary document formats has come from the accessibility community, who claim that Open-Source desktop software lags behind Windows.
Read on here: http://blogs.sun.com/roller/page/korn/20051113
Ok, archlinux is not a desktop linux OS as many other distrobutions and is not for newbies to linux. But is it also not an OS for playing Doom on it in dark rooms.
In my opinion we should do something for the accessibility and usability of archlinux. I mean, we can´t change gnome (usability below zero) and i don´t want GUIs instead of config scripts. But it´s hard to install and running archlinux if you are handicaped (or just don´t want to go mad). We should have some tools included in the distrobutions with that the accessibility of arch is a little bit better.
What´s your thoughts to it?

fun {
Dear Mr <designer>,
we like your new Uberproduct, but find its both difficult and cumbersome for us as we both suffer from (physical incapacity/mental illness/WindowsDependency/Arsewipe Deficiency Syndrome) .
Would you please add/remove/amend/improve the following items, as it would suit us better
...<snip>
We understand that, as this is outside the remit of your design, it would have a dramatic effect on the performance of your product, and impinge on your own personal freetime, by increasing your workload.
But rather than find a product that suits us better, or work towards contributing a solution ourselves, we feel that we should ask you to amend yours as we feel unfairly discriminated against.
signed
A. Goodsuggestion
}nuf
Seriously tho, theres plenty of distro's around that specifically cater for disabilities / ease of use / multimedia / science / games / you-name-it.
Thats the beauty of linux. go find a distro that better suits your needs, and amend it to suit those needs better.
btw, im missing something here.
Is your request for Arch to cater (better) for :
people having trouble with non-proprietary document formats?
people with disabilities?
people afraid of installation induced dementia?
Desktop users, or those who think Arch isn't a suitable desktop environment?
the gaming community?
People who have difficulty with Setup in general?
and is the "we" in "we should do something" a statement of voluntary contribution from your good self or the "royal" we meaning "i'll suggest it, you can do it" ?
kind regards
kern

Pygrub and arch linux

I had install xen on arch linux and now I am attempting to install arch linux as guest. Archlinux works fine as hvm but when I try to use pygrub I get this error message.
Traceback (most recent call last):
File "/usr/lib/xen/bin/pygrub", line 876, in <module>
raise RuntimeError, "Unable to find partition containing kernel"
RuntimeError: Unable to find partition containing kernel
I found this https://caffeine-powered.net/tech/debia … with-xvda/
Can someone share their grub.cfg
When I try to usy py by config kernel and ram drive location It claims that it cant find xvda1

Following the wise words of the good people over on this thread:
http://bbs.archlinux.org:80/viewtopic.php?id=65114
who think that I (and all the others who suggested using virtualbox) are complete .... lets say ... dorks, I will repost with what I hope you (the op) might consider a more helpful (and they, a more acceptable) response. So here it is, my revised response.
I have absolutely no idea if it will work. I've never tried installing arch with parallels, But I have tried installing quite a few dozen other flavours of linux on parallels and never had a problem getting them to install. Despite the fact that there is no explicit mention of arch on the 'approved guest os list', I imagine it would work just fine like all the other linux distros that ARE explicitly mentioned.
If you do decide to put your cd/dvd in the drive and try and install arch under parallels, then please post back here so that the next person that asks the same question can be given an explicit yes or no answer.
@Allan (Forum Moderator from the unhappy thread) Please don't ban me for my unacceptable original response. I promise I wont ever say anything ever again.
Last edited by tim (2009-02-11 14:01:46)

Use Arch Linux Disc Just For GRUB?

I already installed Arch linux, and have it up and running just fine. I have a second hard drive that has no partitions or uses as of yet. Would it be possible for me to install Windows on /sdb, install GRUB with the Arch disk to /sda, uncomment out the WIndows entry in the GRUB .conf file, and get a working dualboot?

Let's clarify exactly what you want to do.
My understanding at this point is that sda is the main boot disk and that you currently have GRUB and Arch installed on it. You want to install Windows on sdb and you think that you have to overwrite GRUB on sda during the boot process to get Windows to boot properly. You therefore want to know how you can restore GRUB on sda after a successful installation of Windows on sdb.
If that's not the case, please clarify further.
If that is the case, then I don't think you need to do it that way. Set sdb to the main boot disk and then install Windows and the Windows boot loader normally on sdb. Once that's done, reset the main boot disk to sda and then edit GRUB to chainload sdb. This way you do not need to faff about with the Windows boot loader later if you decide to boot directly into Windows at a later date. The Windows installation remains independent on its own disk which is the easiest way to dualboot imo.
As for your question about installing GRUB from the liveCD, I think your actual question is whether you can overwrite the MBR of sda with GRUB from the liveCD (which is not the same as "installing" GRUB). I think you can by jumping to that step in the setup, but I am not sure and I suggest that you wait for confirmation from someone else who is.
Last edited by Xyne (2009-08-21 23:19:11)

[SOLVED] Dual boot windows 7 and arch Linux with seperate hard drives

Ok so I'm stuck trying to get my computer to dual boot windows 7 and arch. They are installed on different hard drives and I have grub 2 as the boot loader. I can't find any tutorials on how to do it with seperate hard drives I know how to do it if they are on the same hard drive. Also I want windows on the "first" hard drive how do I check to see which one it considers the first?
Last edited by bdawg (2012-09-21 23:15:37)

DSpider wrote:
drobole wrote:If you want to change it so that sda becomes sdb and sdb becomes sda, you should be able to do that in BIOS.
Not from the BIOS. He would need to physically open up the computer and switch the cables between them (or add another drive).
There's no actual performance increase in changing this order. Performance increase is when you have the partitions as close to the beginning of a HDD as possible, where the platters spin faster (basic mechanics, not to be confused with CD/DVD, which are being written from the inside-out to prevent errors after extended usage), and it especially doesn't apply to SSDs whatsoever.
You may be right about that. I remember I had to do this a while back but I probably switched the cables. It also messed up the drive mapping in Windows 98 if I remember correctly.

Im am trying to set up my printer for web services and it is asking me for a proxy address

im am trying to set up my printer for web services and it is asking me for a proxy address

Have you downloaded and installed an App Store app that you downloaded free from some website instead of from the App Store? If so, that's a stolen app, and you need to delete it.

Vista laptop and Arch Linux laptop competing for an IP address

Similar Messages

Maybe you are looking for