Visual c++ load .ini files to combobox

I create pop up program for my company, I use Visual c++ CLR. I use .ini files for load and write data in my program.
than I have confuse when I want to load .ini files to show in combobox. I already use "GetPrivateProfileStringA/WritePrivateProfileStringA", but it can't read .ini files to combobox. please give my suggestion for my program. thank you (:

Hi,
Welcome to MSDN.
I found that you have posted this issue with the following thread in C++ forum.
Visual
c++ load .ini files to combobox
You could focus on that thread to get support.
Have a nice day.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Tecra M7: Can't create Recovery CD: Missing CDDVD.ini - Error loading INI file: RDC_info.ini

I just recently purchased a Tecra M7, but the system does not come with recovery media, just a Recovery partition and a Recovery Disk creator.
However, when I try to run the Recovery Disc Creator, it replies with "Error loading INI file: C:\Program Files\Sonic\RecordNow!\RDC_info.ini".
I opened this file to try to determine the error, but the contents simply refer to a file named CDDVD.ini. I have looked all over the Hard Drive, even mounted the Recovery Partition, but could not find this file.
Searching on Google, I found that this file regularly goes missing, and that without it, the recovery media cannot be created. One person reported Tech Support emailing him the file, another was emailed by another user.
In both cases, the user was immediately able to make the disks. In any case, it seems to be a standard file, referring to "Add_info.ini" (Application and Drivers Disks) and "Rec_info.ini" (OS Recovery Disk), fairly consistent and unchanging through all systems that use this method to build disks.
Please, could someone email me theirs or post it here so we can all see?
If/when I receive this file, once I determine it works I will post it here.
Daniel

I have talked to Tech Support, and the Tecra M7 w/ XP Tablet Edition does not have Recovery Disks available yet. I was told to check back in a couple of weeks.

Firefox profile cannot be loaded. It may be missing or inaccessible - yet no profile.ini file is missing (folder empty), clean reinstall has not not worked

I'm running windows 8 and had recently handed my computer back to be repaired. When I got my computer back I started getting the error that states that "Your Firefox profile cannot be loaded. It may be missing or inaccessible." upon opening.
I've had this before and just renamed the profile.ini file as something different forcing Firefox to create a new profile. However the profile.ini file is not there, at all.
Everything that I've searched for shows profile management through firefox, but I can't open firefox to create any profiles so they don't help at all.
Does anyone know

This is usually caused by a problem with the profiles.ini file and the profile marked as Default=1 is no longer present on the hard drive.
*Windows: "%AppData%\Mozilla\Firefox\"
*Linux: ~/.mozilla/firefox/
*Mac: ~/Library/Application Support/Firefox/
*Delete the profiles.ini file to force Firefox to create a new default profile
*Use the Profile Manager to create a new profile
*Use "Choose Folder" to recover an existing profile if there is still one present
*http://kb.mozillazine.org/Profile_Manager
*https://support.mozilla.org/kb/Managing+profiles
*http://kb.mozillazine.org/Profile_folder_-_Firefox
The "AppData" folder in Windows Vista and later Window 7+ versions and the "Application Data" folder in XP/Win2K are hidden folders.
*http://kb.mozillazine.org/Show_hidden_files_and_folders
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

When loading, "pop-up" says "Cannot read XUL Runner.ini file

Up until a few weeks ago, Firefox worked great! Then for some reason when I try to start it from the menu page, a "pop-up box" comes on the screen saying it "can't read the XUL Runner.ini file". I've tried deleting Firefox, but I get the can't read the XUL Runner.ini file. I've tried reloading a fresh copy to install but it refuses it install it saying it "can't read the XUL Runner.ini file and the installation failed. I use AVAST Antivirus and no virus has been reported. HELP!

Some files may have been locked or protected by security software and may have failed to get updated.
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Compile VI with Application Builder: Fails to load settings from INI file.

I utilize Labview 2011. I have written a VI which reads an INI file and sets the Tasks Names of DAQmx tasks. The VI works properly when I run it before compilation. However, once I compile it into a standalone application the application does not change the settings of the channel controls. I have updated the VI to include an indicator to verify that the compiled application is finding the correct ini file. However, the values of the controls never update.
Is there something in the Application Builder which is needed to insure programmatic changing of control values upon compilation?
I'm truly stumped. Any help would be much appreciated.

Your problem might be related to this.

How to create and edit a .ini file using java

Hi All...
Pls help me in creating and editing an .ini file using java...
thanks in advance
Regards,
sathya

Let's assume the ini file is a mapping type storage (key=value) so lets use Properties object. (works with java 1.4 & up)
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.util.Properties;
public class Test {
     private static Properties props;
     public static void main(String[] args) throws IOException {
          File file = new File("test.ini");//This is out ini file
          props = new Properties();//Create the properties object
          read(file);//Read the ini file
          //Once we've populated the Properties object. set/add a property using the setProperty() method.
          props.setProperty("testing", "value");
          write(file);//Write to ini file
     public static void read(File file) throws IOException {
          FileInputStream fis = new FileInputStream(file);//Create a FileInputStream
          props.load(fis);//load the ini to the Properties file
          fis.close();//close
     public static void write(File file) throws IOException {
          FileOutputStream fos = new FileOutputStream(file);//Create a FileOutputStream
          props.store(fos, "");//write the Properties object values to our ini file
          fos.close();//close
}

Error in pda load image file performance in PDA

hello
i am using Windows CE with labview mobile module 8.6 in evaluation version. When trying to use "pda load imege file.vi" i get an error code 1, regardless of loading a .bmp, .gif or .jpg, of only 80kb (no diference in the color depth i use). I have tryed the same program in the windows mobile 5 emulator with the same error code. When i use "pda load bmp.vi" to load a .bmp, everything is OK. Some hints about this error?
some hints about missing dll are provided here
http://forums.ni.com/ni/board/message?board.id=170&message.id=185995&query.id=129565#M185995 -> can that be my problem? but then, why same error in the emulator?
Aditionally, if .gif or .jpg have to be "flatened" to pixmap for opeation inside my VI , is there any difference (in terms of speed and memory allocation) in loading .gif .jpg or .bmp? i have to operate with the raw pixmap data in "real time", and flatened .bmp images (320x220) do not load and update fast enough... any advice for that?

Michiel
acording to the info provided
LabVIEW 8.6 Mobile Module
The
LabVIEW 8.6 Mobile Module includes the necessary Microsoft tools. The
Mobile Module installs ARM Pocket PC and Windows Mobile targets. You
only need to download and install the following additional Microsoft
tools (linked below) if you need x86 emulator targets:
Microsoft eMbedded Visual C++ 4.0
Microsoft eMbedded Visual C++ SP 4 or later
SDK for Windows Mobile 2003-based Pocket PCs
Note: If you are upgrading from version 8.0 or later of the PDA Module, you probably already have the additional tools.
Since
i have an ARM pocket PC, i understand from the above that no extra
software is needed. Anyhow, i will try to install the recomended tools.
About the VI, well, basically not even the library examples work in my
pocket PC, so, you may try those to see if they work on your devices. I
am afraid that the pocket PC i got (it is actually a PNA and not a PDA)
has a reduced version of WINDOWS CE 5.0 installed and that can be the
reason for the error...
regards
regards

Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration: Agentry Error

Hello Experts,
I follow the flightbooking tutorial to create a Material application to get material list. I can start the agentry server but when I connect to SAP server and get data, I face below issue
Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER
I check the parameters name in SAP Agentry Config panel, all are correct. Why cannt it get the data. Do I have to add anything in javaBE.ini? Please help me. Thank you very much.
My javaBE
[HOST]
server=be1.vdc.csc.com
APPNAME=ZCH_MATERIALLIST
[CLIENT_NUM]
CLIENT=800
[SYSTEM_NUM]
SYSNUM=01
[LOGON_METHOD]
; USER_AUTH if standard UID/Password authentication is used
; USER_AUTH_GLOBAL if pooled connections using single UID/Password is used
; USER_AUTH_GROUP if UID/Password authentication with SAP Message Server
; (load balancing) is used
LOGON_METHOD=USER_AUTH
[GLOBAL_LOGON]
; referenced when LOGON_METHOD=USER_AUTH_GLOBAL
; uses a pool of connections to the SAP backend all utilizing a single
; UID/password
UID=
UPASSWORD=
SHAREDCONNECTION=0
GET_PERSONNEL_INFO=
[SERVICE_LOGON]
ENABLED=true
UID=hngu3
UPASSWORD=xxxxxxx
UPASSWORDENCODED=false
[GROUP_LOGON]
; referenced when LOGON_METHOD=USER_AUTH_GROUP
; individual user authentication using an SAP Message Server which distributes
; client connections among a "group" of SAP application servers based on load
; balancing criteria
; host name or IP address of SAP Message Server
MESSAGE_SERVER=
GROUP_NAME=
SYSTEM_ID=
CLIENT=
[LANGUAGE]
LANG=EN
[LOGGING]
Level=4
[REQUIRED_BAPI_WRAPPER]
com.syclo.sap.bapi.LoginCheckBAPI=/SYCLO/CORE_SUSR_LOGIN_CHECK
com.syclo.sap.bapi.RemoteUserCreateBAPI=/SYCLO/CORE_MDW_SESSION1_CRT
com.syclo.sap.bapi.RemoteParameterGetBAPI=/SYCLO/CORE_MDW_PARAMETER_GET
com.syclo.sap.bapi.SystemInfoBAPI=/SYCLO/CORE_SYSTINFO_GET
com.syclo.sap.bapi.ChangePasswordBAPI=/SYCLO/CORE_SUSR_CHANGE_PASSWD
com.syclo.sap.bapi.CTConfirmationBAPI=/SYCLO/CORE_OUTB_MSG_STAT_UPD
com.syclo.sap.bapi.DTBAPI=/SYCLO/CORE_DT_GET
com.syclo.sap.bapi.GetEmployeeDataBAPI=/SYCLO/HR_EMPLOYEE_DATA_GET
com.syclo.sap.bapi.GetUserDetailBAPI=/SYCLO/CORE_USER_GET_DETAIL
com.syclo.sap.bapi.GetUserProfileDataBAPI=/SYCLO/CORE_USER_PROFILE_GET
com.syclo.sap.bapi.PushStatusUpdateBAPI=/SYCLO/CORE_PUSH_STAT_UPD
com.syclo.sap.bapi.RemoteObjectCreateBAPI=/SYCLO/CORE_MDW_USR_OBJ_CRT
com.syclo.sap.bapi.RemoteObjectDeleteBAPI=/SYCLO/CORE_MDW_USR_OBJ_DEL
com.syclo.sap.bapi.RemoteObjectGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
com.syclo.sap.bapi.RemoteObjectUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.RemoteReferenceCreateBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_CRT
com.syclo.sap.bapi.RemoteReferenceDeleteBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_DEL
com.syclo.sap.bapi.RemoteReferenceGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
com.syclo.sap.bapi.RemoteReferenceUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.RemoteSessionDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
com.syclo.sap.bapi.RemoteUserDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
com.syclo.sap.bapi.RemoteUserUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.TransactionCommitBAPI=WFD_TRANSACTION_COMMIT
com.syclo.sap.bapi.SignatureCaptureBAPI=/SYCLO/CS_DOBDSDOCUMENT_CRT

Hi Tahir, please help me check the log below
Agentry Runtime Worker Thread###throwExceptionToClient::begin |
Agentry Runtime Worker Thread###throwExceptionToClient::com.syclo.sap.material.steplet.MaterialSteplet::throwExceptionToClient::397::MaterialSteplet - Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER |
Agentry Runtime Worker Thread###Exception: 17:15:35 06/17/2014 : 20 (Agentry3), Java Business Logic Error (com.syclo.agentry.BusinessLogicException: MaterialSteplet - Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER), |
Agentry Runtime Worker Thread###loggedOut::begin |
Agentry Runtime Worker Thread###HNGU3: SESSION END |
Agentry Runtime Worker Thread###BAPI::begin |
Agentry Runtime Worker Thread###create::nulled repository::created new repository |
Agentry Runtime Worker Thread###create::/SYCLO/CORE_MDW_SESSION1_DEL Connection ID: com.sap.mw.jco.JCO$Client@2656ed99 |
Agentry Runtime Worker Thread###create::Function /SYCLO/CORE_MDW_SESSION1_DEL created |

How to load configuration files with to TestStand

Hello,
I need an expert advise on setting up Teststand environment. I am developing a generic tester that will eventually support multiple product lines. The PXI equipment is common but the Pin assignment will change from product to another. So, I was thinking to have a configuration file (xml, excel, .csv...etc) that defines each product line. The configuration file will contain all the pin routing, like which pin is connected to which NI Card channel and fault insertion unit. My thought was to load this configuration file to the Teststand environment before starting a series of tests. I had in mind using XML files and use a labview parser to extract the data and write it to Teststand variables. My question is:
Is this the best practice for this approach ? Is there a better method ? Can I load data into Teststand first and hold the data in Teststand while testing a bunch of UUTs. I do not want load this file at the beginning of every Test, just once when opening Teststand.
I appreciate any advise on this.
Thanks,
Ayman

I'm using .ini file with configuration information and a startup sequence what read this file, configure the system and then run selected tests. Selected tests list is in the .ini file as well. Configuration info is passed to subsequences as a parameter or "propagate local".
I disagree with the idea of creating a separate sequence for each product, this solution is not scalable.
Message Edited by skof on 12-24-2009 09:37 PM
Sergey Kolbunov
CLA, CTD

How to get the key in the ini file?

I want to know how can i read all keys in the section of an ini file
for e.g xx.ini will like this:
[section]
key1=value1111
key2=value2222
I want to get "key1","key2".

Here is a C# library that reads and parses the INI file's content (it does not use KERNEL32.dll API).
Also here is a sample code for your requirement:
var file = new IniFile();
file.Load("xx.ini");
List<string> keyNames = new List<string>();
foreach (var key in file.Sections["section"].Keys)
keyNames.Add(key.Name);

"Search in Files" inside .ini files

I use the site search and search in file features in Dreamweaver quite often but I just discovered that if I have a folder full of .ini files and I need to search globally inside those files Dreamweaver returns no results.
Apparently, DW is unable to search inside files other than HTML, PHP, CSS, JS, etc. But it won't search in .ini files or any weird (for DW) file extensions.
I once was able to set up my DW to look inside PHTML files (Used by Magento) as well as applying code coloring to them as it would on PHP files.
I suspect this is a similar process but I wanted to make sure I was not seeing things. Is DW really that dense that will not search inside a file with an extension it doesn't know?
By the way, I did add .ini to the recognizable files in preferences, but obviously that's not enough to have DW search inside them.
OFF TOPIC COMMENT
Another weird thing I just noticed is that the "asset" and other modules will only work in WYSIWYG view. Meaning that if I save a color in my assets I cannot use it to insert it in a CSS file. Not even in code view. I have to be in the visual editor for it to work, but then it's useless to me.
Incidentally, some time ago I found that the visual editor in DW is actually very useful when working with dynamic websites like Drupal or wordpress. Especially when dealing with very large pages with lots of CSS files.
However, no one IO know would or should build their sites in the visual editor. It's simly a bad way to work. Why would adobe limit the use of the "assets" pane (and the "History pane too now that I remember) to the visual editor is beyond me in this day and age.
I do a lot of tasks where it would be greast to copy a procedure like a substiotution and have DW repeat the same procedure on other pages or similar code snippets. Yet, it won't alow me.
I love Dreamweaver and I am actually writing a book on how to use it with the likes of wordpress, drupal, etc. It cuts dowen development and design time by less than a third. If those things worked everywhere instead of just in the visual editor it would cut down even more on the time it ntakes to design dynamic website templates.
Sorry about the rant.
Thank you for any help.

Hi David, I too have worked closely on a lot of software projects and I am well aware of the limitations. In fact, that's one of the reasons I lioke to work on open source projects because of the vast talent pool they can utilize. Private companies, no matter how big, neet to triage new development according to their resources.
By the way, adding the .ini files to the extension.txt files in Dreamweaver is pretty easy. Since code coloring is not an issue that's really the only change I need to make. When I integrated the PHTML file extension for Magento I had to make a lot more changes (still manageable though).
One of your comments, about DW keeping its legacy features in a changing web development world, made me think that it may be time for Adobe to spawn a different IDE or start thinking about a more modular approach to the application.
I am writing a book on Dreamweaver integration for Open Source web scripts and when talking to other open source developers, one thing that comes up often is that Dreamweaver is a "bloated" program (this is not my complaint, by the way).
Part of the issue is that it needs to keep a lot of quasi-obsolete features so that long time users won't abandon the platform. Which featrures are obsolete is really up to each user. For me the WYSIWYG view is certainly not something I would use to design web sites, but should Adobe get rid of it, it would absolutely destroy my workflow since I use it to rapidly target HTML, CSS and even Core PHP code in the template and the file system of the scripts I work with.
The new "Live view" in CS4 was a welcome addition, especially since the basic page rendering in DW leaves a lot to be desired (Incidentally Microsnot "Expression" page rendering is a lot better, making the live view feature less exceptional except when troubleshooting JS based effects).
Anyway, that said, DW is an extensible program and there are a lot of thrid party utilities written for Dreamweaver. Couldn't the Adobe team use this extensibility to make improvements to the interface and even use it to add or subctract features from the main application?
I think they are mising an opportunity here to capture a wider audience. DW could ship with a minimal set of features and the team could choose to release their own add-ons so that users could build their own application.
I think that approach would silence a lot of critics, since the basic app would now be a lot slimmer, while still giving power and legacy users the features they need a-la-carte.
I am actually hioping that once my book comes out (if it ever does: the publishing world moves at a snail's pace) it may give the DW team a new perspective on how to use Dreamweaver in a modern web development enviroment, but honestly my biggest hope is for one of the current open source projects like Eclipse to look at my development system and maybe add some Dreamweaver-like features so that finally there would be a real open source alternative to Dreamweaver. In turn, I believe that will make DW move a bit more quickly in adding new features and shedding the obsolete ones.
Anyway, thank you again for the links, I did submit my suggestions. I am not holding my breath but we'll see.
Take care

Why vi dll creates ini file on its own?

Hello,
I have built my LabVIEW project as shared library (dll).
My system looks like this: main exe file loads dll, and this dll loads VI dll.
With LabVIEW 2011 it was ok, but when I switched to 2013 my VI dll started to write into main exe ini file.
When dll is loaded those lines appears in main exe ini file:
[LVRT]
RTTarget.ApplicationPath=C:\Users\user\Documents\LabVIEW Data\Remote Development\startup.rtexe
RTTarget.VIPath=C:\Users\user\Documents\LabVIEW Data\Remote Development
Does someone know what causes this and how to turn it off?

I got the same thing when I built an exe. I have a custom INI file, it has the following entries:
[Oscilloscope 2013]
server.app.propertiesEnabled=True
server.tcp.serviceName="My Computer/VI Server"
server.vi.propertiesEnabled=True
WebServer.TcpAccess="c+*"
WebServer.ViAccess="+*"
DebugServerEnabled=False
DebugServerWaitOnLaunch=True
FPFont="Segoe UI" 15
appFont="Segoe UI" 15
dialogFont="Segoe UI" 15
systemFont="Segoe UI" 15
BDFont="Segoe UI" 15
The only dll it calls is lvanlys.dll. After running the EXE the following are appending to the INI file
RTTarget.ApplicationPath=C:\Users\XXX\Documents\LabVIEW Data\Remote Development\startup.rtexe
RTTarget.VIPath=C:\Users\XXX\Documents\LabVIEW Data\Remote Development
Regards,
mcduff

.bat file and .ini file

I have a batch file with the following contents, I need to substitute the paths \\folder\projectname\formatter\saxon8\ with a variable using .ini file. Could anyone please tell me how do I do this
@echo off
cls
echo.
set CP=\\folder\projectname\formatter\saxon8\saxon8-jdom.jar;\\folder\projectname\formatter\saxon8\saxon8-sql.jar;\\folder\projectname\formatter\saxon8\saxon8sa.jar;\\folder\projectname\formatter\saxon8\saxon-license.lic
...If the path of the needed files gets changed in future, the user need to change the path only in the .ini file and that should reflect in the .bat file.
Message was edited by:
Simmy
Message was edited by:
Simmy

I am reading the INI file in my code whose value C:\\temp\\ is getting displayed in my Batch file, but I need to display only the keyword Path in my Batch file. Can you please tell me what modifications I need to do in my code.
This is the contents of my INI file
[INI file : user.ini]
Path="C:\\temp\\"
The following is my code
    public void createFile()
        try
            p = new Properties();
            p.load(new FileInputStream("D:/user.ini"));
            JarPath=p.getProperty("Path");
            p.list(System.out);
        catch(Exception e)
            System.out.println(e);
        File file1=new File("D:/temp/ps1.bat");
        BufferedWriter bw1;
        try
            bw1=new BufferedWriter(new OutputStreamWriter(new FileOutputStream(file1)));
            bw1.write("@echo off\n");
            bw1.write("cls\n");
            bw1.write("echo.\n");
            bw1.write("set CP="+JarPath+"saxon8-jdom.jar;"+JarPath+"saxon8-sql.jar;"+JarPath+"saxon8sa.jar;"+JarPath+"saxon-license.lic\n");
            bw1.flush();
        catch(IOException ioe)
            System.out.println("Error creating \"ps1.bat\". Process terminated.");
Currently, the following is my Batch file contents
@echo off
cls
echo.
set CP=C:\temp\saxon8-jdom.jar;C:\temp\saxon8-sql.jar;C:\temp\saxon8sa.jar;C:\temp\saxon-license.lic
But I need my Batch file to display
@echo off
cls
echo.
set CP=Path\saxon8-jdom.jar;Path\saxon8-sql.jar;Path\saxon8sa.jar;Path\saxon-license.lic

Placing of properties.ini file

Hi
where should i place my properties.ini file inside an EAR, so a simple class can read it ?
I tried put it in the package of the class who read it but I get an FileNotFoundException.
thanks

Hi
where should i place my properties.ini file inside an
EAR, so a simple class can read it ?"properties.ini"? Why not "xyz.properties" like everyone else uses?
Anyway, store it in any of your application JARs.
I tried put it in the package of the class who read
it but I get an FileNotFoundException.You're not supposed to use direct File IO in J2EE. Use Class.getResourceAsStream(), together with Properties.load().

Translat.ini File

We are upgrading RP11.3 to RP11.5. We have a number of custom rules that have been merged into 11.5 batch system. The issue we are having is that after we merged our custom error messages for our custom rules into the translate.ini file, the system is not recognizing our entries. It seems that the 11.5 system is pulling these error messages from another file.
How can we get the system to recognize our custom errors messages in translate.ini that we have created and used in past version of Documaker.

Under 11.5, Documaker uses Oracle's globalization standards for messaging. The translat.ini file isn't strictly used at runtime, rather, a compiled binary version that is language-specific is used instead. To generate the compiled binary version, there are some steps to be followed.
The first thing you will need is the LMSGEN utility from Oracle's NLSRTL package. Currently this is distributed with Oracle database SDKs. I don't have any more specific information than that right now. Here is a bit more info on this utility http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/ch10oci.htm#i1007610
Once you have LMSGEN installed and ready, you need to convert your translat.ini into an intermediary MSG and MMP files. You can create a script that will translate your translat.ini file and create these files for you. It's a relatively simple process:
Translat.ini lines:
1000 = &E&: Error: Requested library <&LIB&> not available or cannot be loaded.
1001 = &E&: Error: Use of rule or function <&NAME&> requires a printer classification of <&CLASS&>.
Translat.msg:
#CHARACTER_SET_NAME=AMERICAN_AMERICA.US7ASCII
1000, 42, "%1: Error: Requested library <%2> not available or cannot be loaded."
1001, 42, "%1: Error: Use of rule or function <%2> requires a printer classification of <%3>."
Translat.mmp:
1000:E,LIB,
1001:E,NAME,CLASS,
The MMP file is a token/parameter mapping file, since the old translat.ini uses tokens, and Oracle's globalization framework uses parameters. Note the top line in the translat.msg file -- this is required!
The format of the INI file:
msgNumber = &TOKEN&: Message with &TOKEN&
The format of the MSG file:
msgNumber, msgType [42=Error,0=Info], "Message with %1 parms"
Format of the MMP file:
msgNumber:TOKEN1,TOKENn,...,
Once you have the MSG file, then use the LMSGEN utility from Oracle's NLSRTL package to converts that into an MSB file. The MSB file is a compiled binary version of the message file, and this is what is used to generate the actual messages. There will be a different MSG file for each language your system should support. In addition, the MSB files are platform dependent and must be compiled on the platform where they are intended to be used.
One thing to keep in mind when running it is that Oracle's messaging libraries are built around the notion of each product having its own separate directory under the Oracle home directory (identified by the ORACLE_HOME environment variable). Each product may in turn have its own separate component or "facility" with its own set of message files. Oracle manages this by having a separate directory under ORACLE_HOME for each product, and then a "mesg" directory under that where the message files for every component are placed. When you run the lmsgen utility, it already expects there to be an Oracle base directory and an ORACLE_HOME environment variable that points to it. In addition it expects there to be a sub-directory for the product under the Oracle directory, and a "mesg" subdirectory under the product directory. When you run the lmsgen routine, it expects you to give it the name of the msg file, the name of the product, and the name of the facility. It uses the product name to locate the "mesg" subdirectory, and it uses the "facility" name as the base name of the msb file that it generates (the filename is suffixed by the language). So, to run lmsgen you will need to have a directory which has some directory underneath with a "mesg" directory under it. So for example (assuming you don't have Oracle code already installed somewhere) you could do the following:
mkdir C:\Documaker\mesg
set ORACLE_HOME=C:\
lmsgen translat.msg Documaker xlt
and lmsgen would write a file name "xltus.msb" to the "C:\Documaker\mesg" directory. (The msg file has a code in the first line identifying the language that it is written in, which is how it knows to name it with a suffix of "us". Documaker currently doesn't use the "ORACLE_HOME" method of locating the file, but as far as I know, you do need to have an ORACLE_HOME defined to run lmsgen.exe.
Since we don't use the ORACLE_HOME method, you would need to provide command-line options to override input and output paths.
lmsgen translat.msg Documaker xlt us -i .\ -o .\
The -i identifies the input directory to location the MSG file. The -o indicates the output directory to use as a destination for the compiled MSB file.
Finally, move the MSB and MMP file to the \dll\lang folder inside your Documaker installation.

Visual c++ load .ini files to combobox

Similar Messages

Maybe you are looking for