Visualizer and CoverFlow is not showing, all black (not driver problems)

Well I've installed the latest drivers for my Intel Media Accelerator graphic card which is integrated into my motherboard.
Anyways it's still not working. The screen is black. It works on my other computer, and I can't seem to find anything wrong.

I don't see what that would do... However I actually just recently installed 7.0.1 (never tried on the 7.0.0 actually) and it should be a new installation. The virus wasn't disabled during the install.
I'll reinstall and see what it does - I'm just updating album artist right now so I'll do it in a few minutes and get back to you.
And for that off-center thing, it seems like there's nothing on those covers either. And that disappears right away (it goes away one by one extremely fast. Then it's just black.

Similar Messages

I can not write in Hebrew And create effects It shows all distorted When This problem solved?

I can not write in Hebrew
And create effects
It shows all distorted
When This problem solved?

roeisarusi wrote:
When This problem solved?
Nobody knows. iWorks apps have always had bugs that make them unsuitable for Hebrew/Arabic for most people. Tell Apple here:
http://www.apple.com/feedback/keynote.html

Hi there can anyone help. I am connected to the internet by ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no internet connection. the other wireless laptop in my flat works well.

Hi there can anyone help. I am connected to the Internet by Ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no Internet connection. the other wireless laptop in my flat works well. Could the other wireless laptops being used in my flat be affecting my connection. what can I do to get connected, keep connected. Thanks for any ideas out there.

My network connected for a few hours then went back to timing out. I have not changed anything. However there four additional laptop users in my family who do not seem to be having any problems using their wireless connection. Could their film and music downloads be causing the timing out of my connection and if so is there a way I could prioritizes my computer or limit their use?

Lighting effects in Photoshop CC doesn't work for me ... just shows ALL black .. any advice to get it to do what it is supposed to?

Lighting effects in Photoshop CC doesn't work for me ... just shows ALL black .. any advice to get it to do what it is supposed to?

So, you're totally new to computers?
Go to the Help menu in Photoshop and select the System Info menu item. Copy all that information and paste all of it here MINUS your serial number.
Yes, Photoshop can delegate a lot of the computing tasks to the GPU on your graphics card. You may have to disable that feature in Photoshop Preferences > Performance.

I just tried to install the new IOS version and now my screen is all black.. since an hour. My power button is broken so i cant reset my phone. When i plugg it in my computer, it makes a sound, but the screen stays black. MAY YOU HELP ME PLEASE???

I just tried to install the new IOS version and now my screen is all black.. since an hour. My power button is broken so i cant reset my phone. When i plugg it in my computer, it makes a sound, but the screen stays black.
WHAT TO DO

carter87 wrote:
so i bought this Iphone 4 thats jail broken,
Return it.
Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues
Security vulnerabilities: Jailbreaking your device eliminates security layers designed to protect your personal information and your iOS device. With this security removed from your iOS device, hackers may steal your personal information, damage your device, attack your network, or introduce malware, spyware or viruses.
Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
... It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software.

Hi. I have iphone4s 16gig,after update IOS to ver.7.0.2 ,when i play music and rotate in horizontal, show only black screen.

hi. I have iphone4s 16gig,after update IOS to ver.7.0.2 ,when i play music and rotate in horizontal, show only black screen.

I am in the same predicament...any resolve? Other than possibly taking it into the shop?

I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

this is exactly the kind of response i expected, almost begged support to please not do this to me and yet there it is another meaningless, non helpful, standard template response to restart my apple tv.
this does NOT work which is why i am contacting you. i have tried all suggestions about unplugging and restarting and nothing works.
i live in an apartment and logon to the provided wifi wireless. so i do not have access to a router. however, management says they have talked with their provider and have been assured that the required ports are available.
remember all the jokes about how bad windows was because the solution was always to re boot. funny huh? how is apple any different.
i have been to the local apple care store and they are clueless, too.
should we just end it here and you admit that i will not be getting any support from apple on this one? i got the ipad because my kids were such big fans. it is difficult for me to share their enthusiasm.
at this point i am just curious about how you say you cannot support your own product so i can complete my file on this contact.
thanks...sorry it was you who got this problem..

I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

Are you in the US? Order one from here: http://store.apple.com/us/browse/home/shop_mac/mac_accessories/power?mco=MTM3NjU xNDg
Or check out Best Buy.

When i listened my music on my ipod nano 4th, It's sound like a used LPwith the distortion. I check my earphone and it's not the problem. I reset my ipod and it's still having the same problem. Does anybobody having a solution ?

When i listened my music on my ipod nano 4th, It's sound like a used LP with the distortion. I check my earphone and it's not the problem. I reset my ipod and it's still having the same problem. Does anybobody having a solution ?

From my limited knowledge the iPod Nano has no support for iCloud or wireless transfers- therefore the only means of downloading songs is by hooking it up to the computer by the white cable.

Onboard and PCI-E Graphics shows blinking black screen on 8.1

I have a homebrewed 3rd Gen Core i5 on an Intel DQ77MK motherboard which has onboard graphics. I also have an nVidia Quadro FX 3500 PCI-E graphics cards.
The Quadro has two DVI outputs connected to two monitors, I connected a third to the onboard graphics. So I have three monitors.
This worked fine with Windows 7. I go to install windows 8.1 and I turned off auto-updates and all the auto device driver junk. I installed the Intel drivers and the nVidia Drivers and three monitors working fine. I go to update to grab a package to remove
that stupid "SecureBoot isn't configured properly" watermark and I reboot to black screens with a cursor and nothing else. I reboot to the BIOS and turn off the integrated graphics and I can get back in - but I really want my triple monitors.

black screens with a cursor and nothing else.
So, if there is a cursor, it's not really "black", just blank. But to be really clear "cursor" means an underscore at the top of the screen, or something else? I have seen the former myself but don't really know what it means. Also it has
only happened occasionally and I can't remember whether it shows on both of my monitors when it happens? I think that when I have seen that I have had to unplug some other USB devices to get past that symptom. E.g. my usual tricks with Win-P or
Ctrl-Alt-Delete or Shift-F10 etc. did nothing--no beeps and no drive light activity.
A reason that it could be important to know if the underscore appears on all monitors is that sometimes the boot seems to get confused about which monitor is primary, so if both monitors have different attributes (as mine do) then perhaps the symptom
could be understood as the wrong monitor getting the controls that were meant for another?
reboot to the BIOS and turn off the integrated graphics and I can get back in
That sounds like a driver problem but I don't know for which component, e.g. WinPE? Boot Manager? OS? So instead of doing that have you tried using the Advanced Boot Option to use low resolution video (AKA VGA mode)? The BCD allows even
other video related settings. While you are having problems it would be a good idea to turn on the Boot menu prompt, even if you don't have multiple partitions to boot, just to make it easier to use those options. FWIW a surprise for me when I
tried this is that we are not restricted to what drivers the OS can use later. E.g. I just used Win-P once in the OS and could make everything work normally after that.
Another thing that you could try is tracing your boot activity with xbootmgr and then finding out what is different for your two cases.
Good luck
Robert Aldwinckle

I tried to restart my iPad2 beacuse of email issues and now the screen is all black, I can't open it anymore...

My screen is all black except that white wainting sign... what should I do? Pressing down the sleep/start button doesn't change anything.

Have you tried a reset: hold the sleep/power button and home button, ignore the slider, and let it restart.
Have you tried connecting to iTunes and see if it recognizes and can reset, not retore unless all else fails.

Performance monitor reports and graphs don't show all the counters that were captured

I've run into an odd behavior of performance monitor that I haven't been able to clear up yet: after I run a data collector set, the resulting report only shows a partial list of the counters that I captured, and so does the graph of that report (but different
items).
For instance, I chose the following counters for the data collector set:
\PhysicalDisk(*)\% Idle Time
\PhysicalDisk(*)\Avg. Disk Queue Length
\PhysicalDisk(*)\Avg. Disk sec/Read
\PhysicalDisk(*)\Avg. Disk sec/Write
When the data collection ends, the report that gets displayed shows all those counters for _Total instance and C:, but then E: only shows % Idle Time and Avg. Disk Queue Length. That's it, the report ends there, even though I also have F: and V: drives on
this server.
If I choose to view the graph of this data collection, it only shows those four counters for the _Total instance.
It took me a while to realize that all the data is being captured, but it's just the display that is truncated. If I view the folder then open the report.html, it actually shows all the data. Same with the graphs. If I select to add counters and add
all the missing counters, they are displayed.
I have searched high and low but haven't been able to find more than one post at ServerFault where someone had a similar issue, but no real solution or cause was provided, so I was hoping that someone here might have an idea.
I also found a variety of articles about missing counters due to registry settings or because the counters needed to be reset, but that's a different issue that doesn't apply in my case. By the way, this is on a windows server 2012 R2 VM (file server).

Hi SomeAdmin,
The counter missing often caused by the related registry value is corrupted, please first refer the following related KB then perform a fix then monitor the issue again.
Event ID 3012 — Performance Counter Loading
http://technet.microsoft.com/en-us/library/cc775053(v=ws.10).aspx
More information:
Overview of Performance Monitoring
http://technet.microsoft.com/en-us/library/cc958257.aspx
PerfGuide: Analyzing Poor Disk Response Times
http://social.technet.microsoft.com/wiki/contents/articles/1516.perfguide-analyzing-poor-disk-response-times.aspx
Analyzing Storage Performance using the Windows Performance Analysis ToolKit (WPT)
http://blogs.technet.com/b/robertsmith/archive/2012/02/07/analyzing-storage-performance-using-the-windows-performance-toolkit.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Replacement screen shows all Blacks are instead, Super-Blue's!

My original Dv7-3065dx screen went blank with the back-light still going. Every so often, it would work for a second, then go blank again. so i changed the cable and screen. The new screen worked, except now all the blacks, are super blue! So, of course i thought i got a bad screen, so got another one, but this time it seemed even worse! Upon turning it on, the windows symbol, even steaked blue across the screen, then same thing, all blacks, super blue!
I do want to mention, just in case, the fact that i purchased after market screen, from Amazon, for like $85, that had a converter cable on the back running from the left side connect to the right side connect, so i could connect on the right side.
Could these cables on the back of the aftermarket screens be causing this super blue problem?
I have check connections, to make sure it is pluged in like it should be.
External monitor works fine.
Also, i have already dissassembled the entire laptop, and cleaned the fan and re-thermo'ed the cpu! Runs alot cooler, screen works, but all the blacks, are still super blue, with occasional blank screen period.
What's next?
Anyone?

OK!!!!!!!!!!!! I got my 3rd screen in today, from the site you told me about. I got the one w/o the converter cable on the back of it. AND GUESS WHAT?????????????? IT FRICKIN WORKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
AMAZON SELLS CRAP FOR SCREENS!!!!!!!!!!!!!!!!
I almost kept the 2nd screen, because i thought there was no way it could be both screens, BUT IT FRICKIN WAS!
Sorry for all the caps and !!!!!!!!!!!!, but i am happy and pissed at the same time, because of the headache AMAZON caused me!
Anyway, i am hoping you also tried the one with the cable on the back, so if you did, your problem should be fixed with this also!
Let me know.

Blue screen keeps popping up, format and reinstall did not fix problem

My wife has a Toshiba Satellite A55-S3063 Laptop with Windows XP Home. After we got married in 2008, I noticed SP2 was installed and there was an update ready. She said SP3 never installed and I couldn't get it to install. Even with Registry checks, removing anti-virus, and other suggestions from the MS site, I still couldn't get it to install. I told her we would do a format and reinstall "someday." A month ago, the blue screen of death started coming on regularly and the computer would restart quickly after flashing the blue screen. I did a System Restore from a previous point, but a few days later, it started happening again. I decided to take this opportunity to do a format and reinstall, so I backed everything up. Her computer came with a recovery disk that only gives you the option to do a format and reinstall, not a recovery like I've done on other computers. So the format was really our only option. I did this and installed all the Service Packs (including 3). I put a new battery in (that we hadn't used before) because the old one didn't last very long and I got a blue screen and restart the next time I turned on the computer. AFter that one time, it worked fine the rest of the day. The next day I plugged in the external hard drive (Simpletech 500gb) to move her info back over. A few minutes later, blue screen and system crash. On restart, same thing. Next restart, just a black screen. I decided no big loss if I reinstall again, so I reinstalled again. Now I just get the blue screen during setup. Right after I type in the computer name and click "Next" I can hear the hard drive spinning and then the blue screen and system restarts. The blue screen is not up long enough to read, so I can't give you an error message.
I can only assume this a hardware problem, but I don't know what or how to fix it. We have her sister's old computer which is the same computer, bought at the same time, but stopped working years ago. So with explicit instructions, I might be able to retrieve hardware from that. Except the hard disk; her sister kept that and is using it as a small external drive.

this link should give you some info on how to get it open to everything
A55 disassembly
toshiba doesnt offer any manuals so this is about as good as you will find
hope that helps
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

I'm not able to send emails with mail.ru. Receiving and reading is not a problem. When I create a email with mail.ru its not possible to send it although its stored in my mail.ru account as "still to be send". What can it be??

I'm not able to send emails with mail.ru. Receiving is not a problem. Creating a mail is also not a problem and the mail will be stored at mail.ru as still to be send, only problem is its not possible to send. I noticed the buttons for sending change colour when used but they don't perform. What it is?

Don't know what changed, but all of a sudden able to send emails by mail.ru ...... sorry for bothering.

Visualizer and CoverFlow is not showing, all black (not driver problems)

Similar Messages

Maybe you are looking for