Vlan for voice and vlan for data with diferent ISP best choice of config??

Hello everyone,
Im, Oscar
At our company we have a redundant ISP connection to two separate ISP's.
We are also using VoIP on the network.
Currently one ISP connection is used primarily and the second on is just used as a backup.
I was wondering if it is possible to use the first connection primarily for data traffic and the second connection for VoIP traffic?
We use different VLAN's for voice and data.
Any help would be appreciated.

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Yes, for egress. Ingress is "it depends".
You could also consider using both links for both kinds of traffic.

Similar Messages

Avoiding change pointers for data with status planned

Hi,
we have to distribute HCM-data, standard infotypes and customer infotypes, into other SAP sytems. One of the receiving systems must not get data with the status planned (istat = 2).
Which would be the best way to avoid planned data in the receiving system? Is it possible to avoid creating change pointers for planned data in the delivering system or have I to delete the planned data in the receiving system while processing the idocs via user-exit?
Best regards
Stefan

Dear Stefan,
You can create the change pointers manually from the IDOC data (e.g.with FM CHANGE_POINTERS_CREATE) during the inbound processing within of the customer-exits of enhancement RHALE001 or within an own BAdI implementation of BAdI HRALE00INBOUND_IDOC.
Or else you can use method IDOC_DATA_FOR_RECEIVER_MODIFY of BAdI HRALE00OUTBOUND_IDOC. In this case please make sure that note 1292241 is implemented.
Hope it helps,
Christine

Optimal read write performance for data with duplicate keys

Hi,
I am constructing a database that will store data with duplicate keys.
For each key (a String) there will be multiple data objects, there is no upper limit to the number of data objects, but let's say there could be a million.
Data objects have a time-stamp (Long) field and a message (String) field.
At the moment I write these data objects into the database in chronological order, as i receive them, for any given key.
When I retrieve data for a key, and iterate across the duplicates for any given primary key using a cursor they are fetched in ascending chronological order.
What I would like to do is start fetching these records in reverse order, say just the last 10 records that were written to the database for a given key, and was wondering if anyone had some suggestions on the optimal way to do this.
I have considered writing data out in the order that i want to retrieve it, by supplying the database with a custom duplicate comparator. If I were to do this then the query above would return the latest data first, and I would be able to iterate over the most recent inserts quickly. but Is there a performance penalty paid on writing to the database if I do this?
I have also considered using the time-stamp field as the unique primary key for the primary database instead of the String, and creating a secondary database for the String, this would allow me to index into the data using a cursor join, but I'm not certain it would be any more performant, at least not on writing to the database, since it would result in a very flat b-tree.
Is there a fundamental choice that I will have to make between write versus read performance? Any suggestions on tackling this much appreciated.
Many Thanks,
Joel

Hi Joel,
Using a duplicate comparator will slow down Btree access (writes and reads) to
some degree because the comparator is called a lot during searching. But
whether this is a problem depends on whether your app is CPU bound and how much
CPU time your comparator uses. If you can avoid de-serializing the object in
the comparator, that will help. For example, if you keep the timestamp at the
beginning of the data and only read the one long timestamp field in your
comparator, that should be pretty fast.
Another approach is to store the negation of the timestamp so that records
are sorted naturally in reverse timestamp order.
Another approach is to read backwards using a cursor. This takes a couple
steps:
1) Find the last duplicate for the primary key you're interested in:
cursor.getSearchKey(keyOfInterest, ...)
status = cursor.getNextNoDup(...)
if (status == SUCCESS) {
      // Found the next primary key, now back up one record.
      status = cursor.getPrev(...)
} else {
      // This is the last primary key, find the last record.
      status = cursor.getLast(...)
}2) Scan backwards over the duplicates:
while (status == SUCCESS) {
      // Process one record
      // Move backwards
      status = cursor.getPrev(...)
}Finally another approach is to use a two-part primary key: {string,timestamp}.
Duplicates are not configured because every key is unique. I mention this
because using duplicates in JE has more overhead than using a unique primary
key. You can combine this with either of the above approaches -- using a
comparator, negating the timestamp, or scanning backwards.
--mark

Problem inserting and querying XML data with a recursive XML schema

Hello,
I'm facing a problem with querying XML data that is valid against a recursive XML Schema. I have got a table category that stores data as binary XML using Oracle 11g Rel 2 on Windows XP. The XML Schema is the following:
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:complexType name="bold_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="keyword_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
               <xs:element name="plain_text" type="xs:string"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="emph_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="text_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="parlist_type">
          <xs:sequence>
               <xs:element name="listitem" minOccurs="0" maxOccurs="unbounded" type="listitem_type"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="listitem_type">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="parlist" type="parlist_type"/>
               <xs:element name="text" type="text_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:element name="category">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="name"/>
                    <xs:element name="description">
                              <xs:complexType>
                                        <xs:choice>
                                                       <xs:element name="text" type="text_type"/>
                                                       <xs:element name="parlist" type="parlist_type"/>
                                        </xs:choice>
                              </xs:complexType>
                    </xs:element>
                                                            </xs:sequence>
                                                            <xs:attribute name="id"/>
                                        </xs:complexType>
                    </xs:element>
</xs:schema>I registered this schema and created the category table. Then I inserted a new row using the code below:
insert into category_a values
(XMlElement("category",
      xmlattributes('categoryAAA' as "id"),
      xmlforest ('ma categ' as "name"),
      (xmlelement("description", (xmlelement("text", 'find doors blest now whiles favours carriage tailor spacious senses defect threat ope willow please exeunt truest assembly <keyword> staring travels <bold> balthasar parts attach </bold> enshelter two <emph> inconsiderate ways preventions </emph> preventions clasps better affections comes perish </keyword> lucretia permit street full meddle yond general nature whipp <emph> lowness </emph> grievous pedro')))
The row is successfully inserted as witnessed by the results of row counting. However, I cannot extract data from the table. First, I tried using SqlPlus* which hangs up and quits after a while. I then tried to use SQL Developer, but haven't got any result. Here follow some examples of queries and their results in SQL Developer:
Query 1
select * from category
Result : the whole row is returned
Query 2
select xmlquery('$p/category/description' passing object_value as "p" returning content) from category
Result: "SYS.XMLTYPE"
now I tried to fully respect the nested structure of description element in order to extract the text portion of <bold> using this query
Query 3
select xmlquery('$p/category/description/text/keyword/bold/text()' passing object_value as "p" returning content) from category_a
Result: null
and also tried to extract the text portion of element <text> using this query
Query 4
select xmlquery('$p/category/description/text/text()' passing object_value as "p" returning content) from category_a
Result: "SYS.XMLTYPE".
On the other hand, I noticed, from the result of query 1, that the opening tags of elements keyword and bold are encoded as the less than operator "<". This explains why query 3 returns NULL. However, query 4 should display the text content of <text>, which is not the case.
My questions are about
1. How to properly insert the XML data while preserving the tags (especially the opening tag).
2. How to display the data (the text portion of the main Element or of the nested elements).
The problem about question 1 is that it is quite unfeasible to write a unique insert statement because the structure of <description> is recursive. In other words, if the structure of <description> was not recursive, it would be possible to embed the elements using the xmlelement function during the insertion.
In fact, I need to insert the content of <description> from a source table (called category_a) into a target table (+category_b+) automatically .
I filled category_a using the Saxloader utility from an flat XML file that I have generated from a benchmark. The content of <description> is different from one row to another but it is always valid with regards to the XML Schema. The data is properly inserted as witnessed by the "select * from category_a" instruction (500 row inserted). Besides, the opening tags of the nested elements under <description> are preserved (no "<"). Then I wrote a PL/SQL procedure in which a cursor extracts the category id and category name into varchar2 variables and description into an XMLtype variable from category_a. When I try to insert the values into a category_b, I get the follwing error:
LSX-00213: only 0 occurrences of particle "text", minimum is 1which tells that the <text> element is absent (actually it is present in the source table).
So, my third question is why are not the tags recognized during the insertion?
Can anyone help please?

Hello,
indded, I was using an old version of Sqlplus* (8.0.60.0.0) because I had a previous installation (oracle 10g XE). Instead, I used the Sqlplus* shipped with the 11g2database (version 11.2.0.1.0). All the queries that I wrote work fine and display the data correctly.
I also used the XMLSERIALIZE function and can now display the description content in SQL Developer.
Thank you very much.
To answer your question Marco, I registered the XML Schema using the following code
declare
doc varchar2(4000) := '<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:complexType name="bold_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="keyword_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
               <xs:element name="plain_text" type="xs:string"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="emph_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="text_type" mixed="true">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="bold" type="bold_type"/>
               <xs:element name="keyword" type="keyword_type"/>
               <xs:element name="emph" type="emph_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:complexType name="parlist_type">
          <xs:sequence>
               <xs:element name="listitem" minOccurs="0" maxOccurs="unbounded" type="listitem_type"/>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="listitem_type">
          <xs:choice minOccurs="0" maxOccurs="unbounded">
               <xs:element name="parlist" type="parlist_type"/>
               <xs:element name="text" type="text_type"/>
          </xs:choice>
     </xs:complexType>
     <xs:element name="category">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="name"/>
                    <xs:element name="description">
                              <xs:complexType>
                                        <xs:choice>
                                                       <xs:element name="text" type="text_type"/>
                                                       <xs:element name="parlist" type="parlist_type"/>
                                        </xs:choice>
                              </xs:complexType>
                    </xs:element>
                                                            </xs:sequence>
                                                            <xs:attribute name="id"/>
                                        </xs:complexType>
                    </xs:element>
</xs:schema>';
begin
dbms_xmlschema.registerSchema('/xmldb/category_auction.xsd', doc,     LOCAL      => FALSE,
        GENTYPES   => FALSE, GENBEAN    => FALSE,   GENTABLES => FALSE,
         FORCE      => FALSE,
         OPTIONS    => DBMS_XMLSCHEMA.REGISTER_BINARYXML,
         OWNER      => USER);
end;then, I created the Category table as follows:
CREATE TABLE category_a of XMLType XMLTYPE store AS BINARY XML
    XMLSCHEMA "xmldb/category_auction.xsd" ELEMENT "category";Now, there still remains a problem of how to insert the "description" content which I serialized as a CLOB data into another table as XML. To this purpose, I wrote a view over the Category_a table as follows:
CREATE OR REPLACE FORCE VIEW "AUCTION_XWH"."CATEGORY_V" ("CATEGORY_ID", "CNAME", "DESCRIPTION") AS
select category_v."CATEGORY_ID",category_v."CNAME",
XMLSerialize(content ( xmlquery('$p/category/description/*' passing object_value as "p" returning content)) as clob) as "DESCRIPTION"
from auction.category_a p,
xmltable ('$a/category' passing p.Object_Value as "a"
columns category_id varchar2(15) path '@id',
          cname varchar2(20) path 'name') category_v;Then, I wrote a procedure to insert data into the Category_xwh table (the source and target tables are slightly different: the common elements are just copied wereas new elements are created in the target table). The code of the procedure is the following:
create or replace PROCEDURE I_CATEGORY AS
v_cname VARCHAR2(30);
v_description clob ;
v_category_id VARCHAR2(15);
cursor mycursor is select category_id, cname, description from category_v;
BEGIN
open mycursor;
loop
/*retrieving the columns*/
fetch mycursor into v_category_id, v_cname, v_description ;
exit when mycursor%notfound;
insert into category_xwh values
(XMlElement("category",
      xmlattributes(v_category_id as "category_id"),
      xmlelement("Hierarchies", xmlelement("ObjHierarchy", xmlelement ("H_Cat"),
                                                           xmlelement ("Rollsup",
                                                                              (xmlelement("all_categories",
                                                                               xmlattributes('allcategories' as "all_category_id")))
    xmlforest (
              v_cname as "cat_name",
              v_description as "description")
end loop;
commit;
close mycursor;
END I_CATEGORY;When I execute the procedure, I get the following error:
LSX-00201: contents of "description" should be elements onlyso, I just wonder if this is because v_description is considered as plain text and not as XML text, even if its content is XML. Do I need to use a special function to cast the CLOB as XML?
Thanks for your help.
Doulkifli

Export and import table data with Java

I need a library for simple exporting and importing table data.
The data should be exported to a SQL file with insert statements.
I just want to tell the library the table name, the connection and where to store the file. The usage should be very simple.
Are there any small libraries for this? Finished calsses and methods which I can just call?

I need a library for simple exporting and importing
table data.
The data should be exported to a SQL file with insert
statements.Every database has utilities to export/import data from tables. Take a look at your database manual.

Import and process larger data with SQL*Loader and Java resource

Hello,
I have a project to import data from a text file in a schedule. A lager data, with nearly 20,000 record/1 hours.
After that, we have to analysis the data, and export the results into a another database.
I research about SQL*Loader and Java resource to do these task. But I have no experiment about that.
I'm afraid of the huge data, Oracle could be slowdown or the session in Java Resource application could be timeout.
Please tell me some advice about the solution.
Thank you very much.

With '?' mark i mean " How i can link this COL1 with column in csv file ? "
Attilio

Calculation logic for date with respect to time.

Dear all,
In BI, i want to get the time for two different dates - how to caculate this
For example
Initial date :- 01.08.2007
Final date :- 24.08.2007 - I want system to calculate the total hours between these dates - the logic should also be applicable if years,months and days are different.
Regards,
M.M

Dear ....
By subtracting final from the initial we will be able to get if the difference is only in days but if the month or year is differing will the same logic hold good - kindly explain?
Regards,
M.M

Can't restore backup, I don'find the right format to use for date with RMAN

Hi I would like to restore my database to a point in time but I can't because I am not able to find the NLS_DATE_FORMAT to use.
I don't know how to alter the session parameters at the RMAN prompt
I would like to restore to this time set until time 'May 10 2006 08:48:10';
Can't some one just tell me how to use thise settings? Please it is urgent

I am on Debian
SQL> show parameter NLS_DATE_FORMAT;
NAME TYPE VALUE
nls_date_format string
SQL> select sysdate from dual;
SYSDATE
10-MAY-06
RMAN> sql "alter session set nls_date_format = 'DD-MON-YYYY HH24:MI:SS'";
using target database control file instead of recovery catalog
sql statement: alter session set nls_date_format = 'DD-MON-YYYY HH24:MI:SS'
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 05/10/2006 10:21:44
RMAN-10015: error compiling PL/SQL program
RMAN-10014: PL/SQL error 103 on line 4 column 57: Encountered the symbol "HH24" when expecting one of the following:
. ( ) , * @ % & | = - + < / > at in is mod remainder not rem
=> .. <an exponent (**)> <> or != or ~= >= <= <> and or like
LIKE2_ LIKE4_ LIKEC_ between || member SUBMULTISET_
For sure I am stupid but why is it so difficult to just set the time

Read IDOC WMMBID02 information and compare inventory data with SAP

Hi All,
Here is an explanation of the issue:
I need to read the data from an inbound IDOC, status 64, of standard type WMMBID02 and message type WMMBXY. I do not want to post the IDOC, but only read the IDOC information which is mainly the material number, batch, status(INSMK), quantity and unit. This data I have to compare with SAP data and see if it is same for the selected material numbers. Now to read and process the inbound IDOC we have a program RBDAPP01 (BD20 Transaction) which calls the process code WMMB (WE42 transaction) which in turn calls the function module L_IDOC_INPUT_WMMBXY. This FM posts the IDOC. I have created a function module with the same import, export and tables parameters like this FM and have attached it to a custom process code ZWMMB. This function module should just read the data of the IDOC and put it in the table TB_IDOC_DATA like EDIDD (IDOC data records). I then loop into this table, extract SDATA and split it into the 3 segments of WMMBID02 and then extract my required data, MATNR, CHARG, INSMK, MENGE & MEINS.
My Question:
How do I trigger the process code ZWMMB so that I can read the IDOC data when it is fired (status 64), just like program RBDAPP01. Is there any standard code that can be copied and modified or how to do it???
I have tried to be very clear with the question, please reply if the question is not clear. If I am clear, please help
Thanks Anirban

I am able to read the contents of the IDOC, but I need to run the FM when I fire the IDOC of message type ZWMMBXY. I have created a custome FM which will behave as a stndard FM for inbound IDOC processing.

OSS functionality and synchronization of data with SAP SOLMAN 4.0

Hi experts,
I would like to enable the OSS functionality in our SAP SOLMAN 4.0.
I need a document for the settings to activate the OSS functionality.
I am looking forward to hearing from you,
Thanks alot.
Tolga AKINCI

If your system has more than one IP/multiple network cards, take care, that not the wrong addresse is sent to OSS.
We have had quite big trouble last month, when our configuration in OSS got overwritten by wrong IPs, the system was unaccessible and thus support could not access our systems and eventually payroll run one day later and ~ 600 people were angry.
Our connection was working the last 10 years so nobody came to the idea, that SolMan is the root cause. Since there´s no option to choose, which IP is finally sent to OSS but only a "manual coding" (note 1050693 - Several IP addresses when you synchronize system data) we decided finally to delete all systems/solutions from SMSY.
So be VERY careful what you synchronize.
@Rüdiger: I appreciate your enthusiasm, but I got hit just too often with that SolMan things, spent hours and hours because SAPs "labour" environments are clean and tidy. I can just warn people out of my experiences to use too much "automatisms" before any harm is done (and yes, we got substantial harm, not only virtually and in the mind but also $$$).
Markus

I have install wamp server one my first laptop and and i access data with my second laptop. i have connected both pc's with internet wire but it show some error"enable to connect mysql server " plz help me

string wire = " Persist Security Info=False; server=xain; port=3307; database=test;username=root;password=";
string query = "insert into test.server_base values('" + textBox1.Text + "', '" + textBox2.Text + "')";
MySqlConnection condatabase = new MySqlConnection(wire);
MySqlCommand cmd = new MySqlCommand(query, condatabase);
MySqlDataReader myreader;
try
condatabase.Open();
myreader = cmd.ExecuteReader();
MessageBox.Show("Good");
condatabase.Close();
catch (Exception xe)
MessageBox.Show(xe.Message,"na g na");
/*server=xain is a server name assing in which database is install */

Hi sohail.
As you title mentioned wamp server, for WampServer is a Windows web development environment. It allows you to create web applications with Apache2, PHP and a MySQL database. This is third-party software. I
am afraid this is out of our support. I would suggest you to ask in their
official forum. Thanks for your understanding.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Exporting and importing form data with out user intervention

Hi
A sample for this is posted on
http://eslifeline.files.wordpress.com/2008/06/importing-and-exporting-data-from-pdf.pdf

Hi Steffen,
You should go to user manegment and there you should export you'll have to copy the text file it will create than paste it in the import of the other portal it should copy the users and the groups.
hope it helps,
Yoav

Is a guest network with password the best choice for tenants?

My mom bought a new Airport Extreme 802.11n to use when she switches from AT&T to Time Warner. Everyone uses PCs. I'm assuming that allowing my mom's tenants access as guests will keep them out of my mom's network.
However, are there security problems associated with the tenants using the network to gain access to one another's computers?
Also, my mom paid her computer guy to set up her AT&T router. Is this necessary for setting up the Airport Extreme with reasonable security?

Hi,
Try the [Certification forum| http://forums.oracle.com/forums/forum.jspa?forumID=459]
or explain your doubts regarding the choice you're facing.
Because: I have no clue what's the difference between 144 and 147.

Comparing the Dates and Exclude the Dates with Blank one in BEx Query

Hi all,
    I have created the Formula Variables ZFV_DATE1 on ZDATE1, ZFV_DATE2 on ZDATE2,
       Calculated KF ZCKF_Date with 'ZV_DATE1 < ZV_DATE2' and
       Restricted KF ZRKF_DATE on Key Figure ZCKF_DATE & Characteristic ZDELETE = 'X' to find the Count.
I should exclude if any ZDATE1 or ZDATE2 is Blank in the report. So I kept ZDATE1 & ZDATE2 with Exclude when it is Blank in Filter Section. It is excluding globally all Blank ZDATE1 & ZDATE2, but the Calculated KF logic 'ZV_DATE1 < ZV_DATE2' is not working. It has 'ZV_DATE1 > ZV_DATE2' records also. Next I moved ZDATE1 & ZDATE2 to Restricted KF ZRKF_DATE to Exclude the Blank dates and the report doesn't show correct results. How could I get the correct results with 'ZV_DATE1 < ZV_DATE2' and any ZDATE1 or ZDATE2 is not Blank.
Thanks,
Venkat.

In that case, you approach seems to be mor or less correct. Restrcit the report using Filters on ZDATE1 and ZDATE2 not equal to Blank. You have mentioned that you have defined the CKF as 'ZFV_DATE1 < ZFV_DATE2'. i am assuming you have used boolean operator here. In this case it would result in '1' when the condition is true (i.e, when ZFVDATE2 is greater than ZFVDATE1), else it will result in a '0'. Now, in your report, you should create a condition where you only keep the records where this CKF, ZCKF_Date = 1. This would filter out all the ZCKF=0 records, and hence only thiose records with ZFV_DATE1 < ZFV_DATE2 would be shown.
Regards,
Satwik

To provide financial data with segment info for Statutory consolidation

Hello.
I'd like to know which is the better solution in order to provide company P/L and B/S data with segment info for Statutory consolidation purpose like SEM-BCS or BO-Finance.
(Segment info means like business division for disclosing)
Sometimes PCA accounting info is used and roll-up into FI-SL.
(FI posts Profit center directly or allocates into segment for consolidation)
Do you have any other way to provide financial data with segment from FI?
New GL is good solution??
Please kindly help.
Thanks,
SEM_BW

Hi
Development of New GL and Document splitting is based on to provide the solution for segment reporting to meet the local legal requirements and also to meet company aspirations. Create n number of segments for n number of business requirements.
Cheers
Srinivas

Vlan for voice and vlan for data with diferent ISP best choice of config??

Similar Messages

Maybe you are looking for