VO not retrive all data

Hi
I create view object for entity, the query of view object not return all record from database. Is there any option for fitch all record from database?

JDev version?
Technology you use?
Where do you look for the all(?) rows?
If you are using ADF there is a fetch size defined by the iterator (normally 25) which limits the number of rows returned for one round trip. To see more records you have to scroll.
Timo

Similar Messages

  • Why the 2LIS_08TRTK extractor can not get  all data

    Hello, BW Gurus.
    Why the 2LIS_08TRTK and 2LIS_08TRTLP extractors can not get all data. I had used the RSA3 and get 10 registers, when a check at the VTTK table I had 20 registers, I didnt use filters at RSA3, could you help to know what happen o correct it.

    Is it because
    <i>
    Shipment documents and their dependent objects (shipment stages as well as shipment items [deliveries in the shipment]) are only extracted into BW when the Shipment completion status has been set.
    This is necessary because the numeric values that result from the delivery documents are only established at the time. If the data were already stored earlier in BW, the shipment data would not be updated if the delivery notes were changed in BW.
    </i>
    - from oss note 573470.

  • 2lis_11_VAITM not inserting all data in ODS

    Hello Gurus.
    I'm using extractor 2lis_11_VAITM, when I test the extractor in RSA3, it is bringing me all registers of table VBAP, but when I load this extractor into an ODS in BW, It is not inserting all registers into the cube, some "return orders" are missing, how can i solved this problem ????   I'm using in ODS key Doc number and position.
    THANKS IN ADVANCED.

    Hi Sudheer, ther is no selections during data load, and also ther isn't any routine(either in transfer or update rules).  It's supposed that all registers have to be loaded to the ODS no ?? because i'm using key Doc number and positions, so I want all documents with all positions to be loaded, but this is not happening, there are missing the "'return orders'".
    Any other idea of why this is happening ??

  • FDM export to HFM - 2nd export did not clear all data from 1st export?

    Has anyone experienced exporting a replacement FDM file to HFM where the 2nd file did not contain an account that was present in the original file and that account/value in the 1st file then remained in the HFM trial balance and caused it to be out of balance? Does the replace export option not clear all the prior file data? The only unusual part of it might be that the problem account was derived using logic group script? Thanks.

    Thanks Hensen - Sure, it was easy enough to fix once I deduced what the problem was - although my solution was just to use the data clear function and reload. The real question is how to prevent it from happening again and it sounds like I can't do much about it - other than trying to train the users to watch out for do-over files that have fewer accounts than the original load?? Am I wrong to think that HFM should try to fully clear all previous data from a load file if there is a replacement or at least try to validate whether or not all prior accounts have been repopulated?? There's plenty of good validation in the validation step of FDM. Why not during the export step? If this makes sense, I'll put in another "enhancement request" to support.

  • Help:  Not getting all data from text data type

    Hi there
    I have a stored procedure that returns a couple of fields and one of the fields is of datatype TEXT. In my ResultSet, I do not get all the data back that is stored in the TEXT datatype. I have say about 600 charactors in this field, but only 30 charactors are returned. Is there a reason why this is happening and how can I fix it?
    Please help?
    Thanks

    I set that field to have a normal string of about 50 charactors. Namely: "this is a note that is about 49 charactosrs long." (exclude the quotes). And I still got 30 charactors back only.
    I set a shorter text value of 21 charactors and that returned all 21 charactors.
    The text that is usually in this field is:
    "URL=SubsidiaryNarrative.html�BABY_CARE_PRODUCTS=false�AIDS_FOR_PHYSICALLY_DISABLED=false�SPORT_SUPPLEMENTS=true�NATURAL_REMEDIES=false�COSMETICS_FRAGRANCE=false�WOMANS_HEALTH=false�ADDITIONAL_CARDS=No�EXERCISE_ROUTINE=Yes�NUMBER_OF_CHILDREN=0"
    And I got out "URL=SubsidiaryNarrative.html�B"

  • Ical not storing all data & cant initialize lists

    okay so im trying to store all ical data in seperate lists for hours months years and the actual event ect....it worked fine for a while but now its not storing all the events....and then when it did it would carry over from one run to another. I figured out that was probably because they were properties but when i make the lists global i get a "this variable is not initialized" problem. and even if i somehow managed to fix that its still not reading in all the data. ive been at this for 2 hours and cant see the problem. please help:
    variable defs:
    (*System Variables*)
    global running_processes
    global _weekday
    global _date
    global _month
    global _year
    global _hours
    global _minutes
    global _seconds
    global time_ofday
    (*iCal Variables*)
    global iCal_Open
    global iCal_Run
    global iCal_Calendars
    global iCal_Events
    global icaleventsstore
    global icaleventslast
    global iCalEvents_StartMonth
    global iCalEvents_StartDate
    global iCalEvents_Startyear
    global iCalEvents_Starthours
    global iCalEvents_StartMinutes
    global iCalEvents_EndMonth
    global iCalEvents_EndDate
    global iCalEvents_Endyear
    global iCalEvents_Endhours
    global iCalEvents_EndMinutes
    global iCalEventsStart
    global iCalEventsEnd
    code to split up dates and date:
    on Ref_Events()
    proc()
    if running_processes contains "iCal" then
    (*if iCal is open do the code as normal*)
    set iCal_Run to 1
    set iCal_Open to 1
    tell application "iCal"
    set iCalEventsStart to the start date of every event in every calendar
    set iCalEventsEnd to the end date of every event in every calendar
    set iCal_Events to the summary of every event in every calendar
    set x to 1 --holds calendar to be used
    set y to 1 --holds event to be used
    repeat while x is less than or equal to the number of items in iCal_Events
    repeat while y is less than or equal to the number of items in item x of iCal_Events
    get item y in item x in iCalEventsStart as string
    set temp_date to the result
    --start dates
    set iCalEvents_StartMonth to iCalEvents_StartMonth & the second word of temp_date
    set iCalEvents_StartDate to iCalEvents_StartDate & the third word of temp_date
    set iCalEvents_Startyear to iCalEvents_Startyear & the fourth word of temp_date
    set iCalEvents_Starthours to iCalEvents_Starthours & the fifth word of temp_date
    set iCalEvents_StartMinutes to iCalEvents_StartMinutes & the sixth word of temp_date
    --end dates
    get item y in item x in iCalEventsEnd as string
    set temp_date to the result
    set iCalEvents_EndMonth to iCalEvents_EndMonth & the second word of temp_date
    set iCalEvents_EndDate to iCalEvents_EndDate & the third word of temp_date
    set iCalEvents_Endyear to iCalEvents_Endyear & the fourth word of temp_date
    set iCalEvents_Endhours to iCalEvents_Endhours & the fifth word of temp_date
    set iCalEvents_EndMinutes to iCalEvents_EndMinutes & the sixth word of temp_date
    --event description
    get item y in item x in iCal_Events as string
    set temp_event to the result as string
    set icaleventsstore to icaleventsstore & temp_event
    set y to y + 1
    end repeat
    set x to x + 1
    end repeat
    end tell
    else
    (*if iCal is not open do the code then close it*)
    if iCal_Run is 0 then
    set iCal_Run to 1
    tell application "iCal"
    set iCalEventsStart to the start date of every event in every calendar
    set iCalEventsEnd to the end date of every event in every calendar
    set x to 1 --holds calendar to be used
    set y to 1 --holds event to be used
    repeat while x is less than or equal to the number of items in iCalEventsStart
    repeat while y is less than or equal to the number of items in item x of iCalEventsStart
    get item y in item x in iCalEventsStart as string
    set temp_date to the result
    --start dates
    set iCalEvents_StartMonth to iCalEvents_StartMonth & the second word of temp_date
    set iCalEvents_StartDate to iCalEvents_StartDate & the third word of temp_date
    set iCalEvents_Startyear to iCalEvents_Startyear & the fourth word of temp_date
    set iCalEvents_Starthours to iCalEvents_Starthours & the fifth word of temp_date
    set iCalEvents_StartMinutes to iCalEvents_StartMinutes & the sixth word of temp_date
    --end dates
    get item y in item x in iCalEventsEnd as string
    set temp_date to the result
    set iCalEvents_EndMonth to iCalEvents_EndMonth & the second word of temp_date
    set iCalEvents_EndDate to iCalEvents_EndDate & the third word of temp_date
    set iCalEvents_Endyear to iCalEvents_Endyear & the fourth word of temp_date
    set iCalEvents_Endhours to iCalEvents_Endhours & the fifth word of temp_date
    set iCalEvents_EndMinutes to iCalEvents_EndMinutes & the sixth word of temp_date
    --event description
    get item y in item x in iCal_Events as string
    set temp_event to the result as string
    set icaleventsstore to icaleventsstore & temp_event
    set y to y + 1
    end repeat
    set x to x + 1
    end repeat
    end tell
    quit application "iCal"
    end if
    end if
    if icaleventsstore is not icaleventslast then
    say "new events stored in I Cal. Would you Like to View a List of all events?"
    display dialog "View List of Events?" buttons {"Yes", "No"} default button 2
    if the button returned of the result is "Yes" then
    choose from list icaleventsstore with prompt "All the Current Events"
    else
    -- action for 2nd button goes here
    end if
    set icaleventslast to icaleventsstore
    end if
    end Ref_Events

    You need to be careful when using conditional statements to set global variables (the global declaration does not set any values). I can't tell from the just the one handler you posted, but an example would be the iCal_Run variable - unless it is declared somewhere else, it won't have a value if there isn't an iCal process.

  • St03N not collecting all data

    HI
    does anyone know why would st03n not collect all proper data, we found out recently that a user had scheduled a program as a background job to run and it ran successfully but when we look on that date we don't see that it had run and even that user doesn't come out in the history
    any ideas why?
    regards

    Sorry Sujit that I wasn't clear
    the job i was referring to was a z program that was run be a user in the background.
    that is how we started knowing that there were missing data in st03n
    we were trying to see how many time that program ran and who ran it
    so we went to see in st03n but we found out that there was no history for that program in there or any history for the user who ran the z program in the background.
    there is no connection to SAP_COLLECTOR_FOR_PERFMONITOR background job. this job is running successful in our system and all other data is being collected
    so the data that was missing was on the 14th of march and then we found out that there is no entry of any sort in st03n for 15th of march, but we have data for 16th of march.
    so now we want to know what happened
    i hope this is clear now
    regards

  • Unwrap not unwraping all  data sent from server

    java client server NIO ssl
    At server end send about 50 packets are written using this method:
    sendPacket(String packet)
    writeBuffer = charSet.encode(packet);
    c.ssl.outNetBB.clear();
    c.ssl.engine.wrap(writeBuffer, c.ssl.outNetBB);
    c.ssl.outNetBB.flip();
    //write message to socket channel
    while (c.ssl.outNetBB.hasRemaining())
    socketChannel.write(c.ssl.outNetBB);
    At the client end I read all these packets:
    inNetBB.clear();
    int bytesread = socketChannel.read(inNetBB);
    inNetBB.flip();
    requestBB.clear();
    res = engine.unwrap(inNetBB, requestBB);
    It seems like all the 50 packets are read into inNetBB 6000 bytes
    But the unwrap only consumes 70 bytes and produces 100
    This first 100 bytes is unencrypted correctly and corresponds exactly to one write of the 50 from the server. I dont know why.
    Why am I getting only the first packet of the 50 sent??
    [  Ive tried : while inNtBB.hasRemaining for repeated unwraps
    but only the first packet is output still ]
    TIA
    pbutler

    If I'm reading this right, you're writing (wrapping) about 50 separate SSL packets, and then unwrapping just one.
    Recall:
    The SSLEngine produces/consumes complete SSL/TLS packets only, and
    does not store application data internally between calls to wrap()/unwrap().So it looks to me like you need to keep unwrapping the rest of your 5930 bytes to get the remainder of the application data.
    [ Ive tried : while inNtBB.hasRemaining for repeated unwraps
    but only the first packet is output still ]Are you inadvertantly clearing the inNtBB before you call your additional unwraps?
    If you have lots of small packets, you might want to consider buffering them up and wrapping them to the SSLEngine/SocketChannel all at once. You'll pay less in overhead.

  • Emails do not download all data

    Emails do not download all data

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Export to Excel Action in MS SSRS Report not exporting all data in Report

    Hi,
    I have developed a complex Report that has many expandable nodes in a table format. The report works fine.
    However, when I export the Report to Excel using Actions --> export to Excel, only the data in expanded nodes is included. The data in collapsed nodes is not included.
    I am looking for approach to include data in expanded nodes in Excel Export. The expanded data can be expanded in Excel.
    Any help in this regard will be appreciated.

    Hi Abhijit PS,
    Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
    Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
    control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
    I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
    On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
    If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
    can reference to this similar thread:
    lost collapsing columns when export to excel
    Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
    Article below about how to add  Expand/Collapse Action to an Item for your reference:
    http://msdn.microsoft.com/en-us/library/dd220405.aspx
    If your problem still exists, please feel free to ask
    Regards
    Vicky Liu

  • Open Hub not extracting all data in CUBE

    We created an FI-SL cube and use the OPEN HUB process to extract the current value of accounts.  The problem is that not all the data is being extracted.
    I have a couple of examples where some of the data in the CUBE is not being extracted by the OPEN HUB process.  I have checked the filter and it is setup properly.  I have manually validated the data in the CUBE. 
    It is very strange that the data is in the CUBE correctly, but just being extracted.
    Any ideas?
    Thanks,
    Bill Lomeli

    Ashok,
    This is the first time I have seen a comment about the field limitation.
    + A previous message from Deepak Simon states:
    "I want to extract data from a cube with more than 16 fields."+
    We are using BI 7.0...is that restriction still in place for this version?
    Thanks,
    Bill

  • Can not restore all data/files after disk crash.

    I have a intel MacBook Pro (2008). Hard drive crashed. I replaced the drive and all is well with that. I re-installed Leopard and the Snow Leopard upgrade. Now I am trying to restore all my files/data from my external LaCie drive. All I am seeing is it says "copying to volumes". I don't see the files or anything on my new drive. What am I doing wrong??

    Not sure, but here is a link that may help:
    http://discussions.apple.com/thread.jspa?threadID=435350&tstart=0
    Good luck!

  • Not showing all data in a grid - a summary

    Hello all,
    I have a very simple spreadsheet (created from a template on an ipad and transferred back and forth to a Mac Book Pro) which tracks my weight loss, body fat etc.
    Each day (probably far too often but I'm eager at the start of a diet) I record the figures to a new row so row 1 are the figures for my oldest date, row 2 is the next day etc and this has been going on for almost 4 weeks.
    I show a simple auto created chart so I can track my weight loss. The date is shown along the bottom X axis so it shows a tick mark and date for every day. The Y axis for one chart shiows my weight loss and for another chart it shows my body fat loss.
    Is there any way I can make the charts show tick marks AND VALUE POINTS (say) once per week or every 2 days? Or perhaps eventually once per month. I know I can change the tick mark intervals shown but my values and points are still shown on a daily basis (the same as they have been recorded in the spreadsheet). With one value per day, my chart is gradually growing so it will no longer fit the screen or worse still no longer print onto A4.
    I realise I could record my data less often or delete rows from my spreadsheet so it has one row per week but for the moment at least I'd like to stick to recording my weight on a daily basis but maybe chart it on a weekly or monthly basis. I don't mind having a completely different chart showing weekly weight loss but I can't see a chart or table option anywhere that says only show data on a weekly (7 row basis). Perhaps I've totally missed the point of how this should be done. For example, should I have another table that some how calculates a weekly average from the first table and then I show a chart for that second table. If so, I think my current knowledge is not sufficient to achieve that!
    Thanks
    John.

    Hi John,
    Thank you for your feedback. I used a 5 day average, forgetting that you asked for a weekly average. But I am sure that you can change the formula.
    I don't seem to be able to get connecting lines between the points on the chart.
    Yes, I had trouble getting connecting lines in Chart 2. I don't know the answer to this. Let's hope that the High Priests in this forum can help.
    I wrote:
    If you miss weighing on one day, the weight will be blank. Revise the AVERAGE formula to exclude zeroes.
    Again, let's hope that the High Priests in this forum can help.
    Over to the Gurus!
    Regards,
    Ian.

  • SSRS Chart does not show all data

    Hi,
    I have a report from a cube. I'm using filters to get data. I have filters by year and month, I have a chart that shows data initially from a month. My problem is when I filtered data of different years, for example:
    If I select Year 2014, Months: Jan 2014,Feb 2014, Mar 2014, May 2014, Apr 2014, Jun 2014. The information is displayed correctly.
    If I select Year 2014 and 2013, Months: Nov 2013, Dec 2013, Jan 2014,Feb 2014, Mar 2014, May 2014, Apr 2014, Jun 2014. Only displays information for year 2013 (Nov 2013, Dec 2013).
    Also I have a tablix, using the same dataset that chart, and in this tablix I have not this issue.
    ¿How can I do that chart displays the information I select in filters?
    Greetings

    Hi Pamela G,
    According to your description, you have issue on filtering data in your chart. When you select more than one year (2013 and 2014) in parameter, it only return the data for months of 2013. Right?
    In this scenario, since it shows all months for both years in the month parameter, it seems no issues on cascading parameter. So it may has issue in the filter. We are not sure you add the filter on dataset or chart based on your information. If you add
    the filter on dataset, you may need to check the chart design because the same dataset is working in a tablix. Please try to put the Year into Series or add a calculate field which combine the Year and Month in your dataset then put this field in
    Category. If you add the filter on chart, please check the Operator and Values in your filter. One possibility is, when we set expression for Values, if we double click the parameter, it will return "Parameter!Year.Value(0)" by default, we need to change it
    into "Parameter!Year.Value". If it's still not working, please post some more detail information or screenshots about the dataset and filters. This may help us reproduce your issue in our local environment.
    Best Regards,
    Simon Hou

  • XMLDecoder not returning all data...

    I am connecting to a web service and viewing the response in the Network Monitor. It shows the appropriate collection of data objects - each contains 2 string variables (name, url) and 2 arrays all containing data. When I view the Result Event in the debugger the objects are there but only contain one string variable (name). The other string variable and both arrays are not there.  I was able to track this issue down to were I can see the SOAP response is not being decoded correctly in the decode() function of XMLDecoder.as. Is this a known issue? My result is pretty complicated with nested data. Is there any suggested solution/workaround? Thanks for your advice.

    It doesn't do the join and I get 1 record returned with zero's for both values. Why doesn't it pick up my join?
    -------------------- SQL Request:
    SET VARIABLE QUERY_SRC_CD='Report';SELECT A01_BI_AGENCY_INTEREST_DIM.MASTER_AI_ID saw_0, A01_BI_DSK_CENTRAL_FILE_DIM.INT_DOC_ID saw_1 FROM TIER2 ORDER BY saw_0, saw_1
    +++300000:300004:----2012/06/01 12:44:51
    -------------------- General Query Info:
    Repository: Star, Subject Area: TIER2, Presentation: TIER2
    +++300000:300004:----2012/06/01 12:44:51
    -------------------- Cache Hit on query:
    Matching Query:     SET VARIABLE QUERY_SRC_CD='Report';SELECT A01_BI_AGENCY_INTEREST_DIM.MASTER_AI_ID saw_0,
    A01_BI_DSK_CENTRAL_FILE_DIM.INT_DOC_ID saw_1
    FROM TIER2 ORDER BY saw_0, saw_1
    Created by:     Administrator
    +++300000:300004:----2012/06/01 12:44:51
    -------------------- Query Status: Successful Completion
    +++300000:300004:----2012/06/01 12:44:51
    -------------------- Physical Query Summary Stats: Number of physical queries 1, Cumulative time 0, DB-connect time 0 (seconds)
    +++300000:300004:----2012/06/01 12:44:51
    -------------------- Rows returned to Client 1
    +++300000:300004:----2012/06/01 12:44:51
    -------------------- Logical Query Summary Stats: Elapsed time 0, Response time 0, Compilation time 0 (seconds)

Maybe you are looking for