St03N not collecting all data
HI
does anyone know why would st03n not collect all proper data, we found out recently that a user had scheduled a program as a background job to run and it ran successfully but when we look on that date we don't see that it had run and even that user doesn't come out in the history
any ideas why?
regards
Sorry Sujit that I wasn't clear
the job i was referring to was a z program that was run be a user in the background.
that is how we started knowing that there were missing data in st03n
we were trying to see how many time that program ran and who ran it
so we went to see in st03n but we found out that there was no history for that program in there or any history for the user who ran the z program in the background.
there is no connection to SAP_COLLECTOR_FOR_PERFMONITOR background job. this job is running successful in our system and all other data is being collected
so the data that was missing was on the 14th of march and then we found out that there is no entry of any sort in st03n for 15th of march, but we have data for 16th of march.
so now we want to know what happened
i hope this is clear now
regards
Similar Messages
-
OBIEE Usage Tracking not collecting all data!
Hi guys
Strange problem here. We have set up usage tracking (OBIEE 11.1.1.6) and it is running smoothly, except that we dont get all the data. I have adjusted the field "Query_Text" to contain 4000 bytes, and this also gave us an improvement - it collects more usage tracking. But we aren't getting all the usage stats...
Does anybody have a an idea as to what could be wrong here?
Best regards, JacobJacob J wrote:
Hi guys
Strange problem here. We have set up usage tracking (OBIEE 11.1.1.6) and it is running smoothly, except that we dont get all the data. I have adjusted the field "Query_Text" to contain 4000 bytes, and this also gave us an improvement - it collects more usage tracking. But we aren't getting all the usage stats...
Does anybody have a an idea as to what could be wrong here?
Best regards, JacobWhat usage stats are missing? Is there any pattern/behavior where the stats are not being inserted into the tables? -
Why the 2LIS_08TRTK extractor can not get all data
Hello, BW Gurus.
Why the 2LIS_08TRTK and 2LIS_08TRTLP extractors can not get all data. I had used the RSA3 and get 10 registers, when a check at the VTTK table I had 20 registers, I didnt use filters at RSA3, could you help to know what happen o correct it.Is it because
<i>
Shipment documents and their dependent objects (shipment stages as well as shipment items [deliveries in the shipment]) are only extracted into BW when the Shipment completion status has been set.
This is necessary because the numeric values that result from the delivery documents are only established at the time. If the data were already stored earlier in BW, the shipment data would not be updated if the delivery notes were changed in BW.
</i>
- from oss note 573470. -
CS5.5 Project Manager not collecting all media
I am having a problem with the Project Manager in CS5.5.
Although I have used it succesfully in the past, on a current project I am trying to archive it is not performing correctly.
The issue is that the Project Manager is not collecting all the video clips when processing the project.
My project and its assets are contained in a folder and not scattered across my computer or multiple drive. The settings I am selecting are:
Selecting all sequences (11 in project)
Create trimmed project
Exclude unused clips
90 frame handles
Save in different folder on different drive
When I process, I am consistantly missing several video clips. They are a mix of avi and mov clips and they seem to be the same clips each time.
The clips are located with the other video files. They play just fine in the project but somehow they do not get included and trimmed when processed through the Project Manager.
Any idea or suggestions are approciated.Any ideas? Anyone?
-
XMLDecoder not returning all data...
I am connecting to a web service and viewing the response in the Network Monitor. It shows the appropriate collection of data objects - each contains 2 string variables (name, url) and 2 arrays all containing data. When I view the Result Event in the debugger the objects are there but only contain one string variable (name). The other string variable and both arrays are not there. I was able to track this issue down to were I can see the SOAP response is not being decoded correctly in the decode() function of XMLDecoder.as. Is this a known issue? My result is pretty complicated with nested data. Is there any suggested solution/workaround? Thanks for your advice.
It doesn't do the join and I get 1 record returned with zero's for both values. Why doesn't it pick up my join?
-------------------- SQL Request:
SET VARIABLE QUERY_SRC_CD='Report';SELECT A01_BI_AGENCY_INTEREST_DIM.MASTER_AI_ID saw_0, A01_BI_DSK_CENTRAL_FILE_DIM.INT_DOC_ID saw_1 FROM TIER2 ORDER BY saw_0, saw_1
+++300000:300004:----2012/06/01 12:44:51
-------------------- General Query Info:
Repository: Star, Subject Area: TIER2, Presentation: TIER2
+++300000:300004:----2012/06/01 12:44:51
-------------------- Cache Hit on query:
Matching Query: SET VARIABLE QUERY_SRC_CD='Report';SELECT A01_BI_AGENCY_INTEREST_DIM.MASTER_AI_ID saw_0,
A01_BI_DSK_CENTRAL_FILE_DIM.INT_DOC_ID saw_1
FROM TIER2 ORDER BY saw_0, saw_1
Created by: Administrator
+++300000:300004:----2012/06/01 12:44:51
-------------------- Query Status: Successful Completion
+++300000:300004:----2012/06/01 12:44:51
-------------------- Physical Query Summary Stats: Number of physical queries 1, Cumulative time 0, DB-connect time 0 (seconds)
+++300000:300004:----2012/06/01 12:44:51
-------------------- Rows returned to Client 1
+++300000:300004:----2012/06/01 12:44:51
-------------------- Logical Query Summary Stats: Elapsed time 0, Response time 0, Compilation time 0 (seconds) -
2lis_11_VAITM not inserting all data in ODS
Hello Gurus.
I'm using extractor 2lis_11_VAITM, when I test the extractor in RSA3, it is bringing me all registers of table VBAP, but when I load this extractor into an ODS in BW, It is not inserting all registers into the cube, some "return orders" are missing, how can i solved this problem ???? I'm using in ODS key Doc number and position.
THANKS IN ADVANCED.Hi Sudheer, ther is no selections during data load, and also ther isn't any routine(either in transfer or update rules). It's supposed that all registers have to be loaded to the ODS no ?? because i'm using key Doc number and positions, so I want all documents with all positions to be loaded, but this is not happening, there are missing the "'return orders'".
Any other idea of why this is happening ?? -
FDM export to HFM - 2nd export did not clear all data from 1st export?
Has anyone experienced exporting a replacement FDM file to HFM where the 2nd file did not contain an account that was present in the original file and that account/value in the 1st file then remained in the HFM trial balance and caused it to be out of balance? Does the replace export option not clear all the prior file data? The only unusual part of it might be that the problem account was derived using logic group script? Thanks.
Thanks Hensen - Sure, it was easy enough to fix once I deduced what the problem was - although my solution was just to use the data clear function and reload. The real question is how to prevent it from happening again and it sounds like I can't do much about it - other than trying to train the users to watch out for do-over files that have fewer accounts than the original load?? Am I wrong to think that HFM should try to fully clear all previous data from a load file if there is a replacement or at least try to validate whether or not all prior accounts have been repopulated?? There's plenty of good validation in the validation step of FDM. Why not during the export step? If this makes sense, I'll put in another "enhancement request" to support.
-
Help: Not getting all data from text data type
Hi there
I have a stored procedure that returns a couple of fields and one of the fields is of datatype TEXT. In my ResultSet, I do not get all the data back that is stored in the TEXT datatype. I have say about 600 charactors in this field, but only 30 charactors are returned. Is there a reason why this is happening and how can I fix it?
Please help?
ThanksI set that field to have a normal string of about 50 charactors. Namely: "this is a note that is about 49 charactosrs long." (exclude the quotes). And I still got 30 charactors back only.
I set a shorter text value of 21 charactors and that returned all 21 charactors.
The text that is usually in this field is:
"URL=SubsidiaryNarrative.html�BABY_CARE_PRODUCTS=false�AIDS_FOR_PHYSICALLY_DISABLED=false�SPORT_SUPPLEMENTS=true�NATURAL_REMEDIES=false�COSMETICS_FRAGRANCE=false�WOMANS_HEALTH=false�ADDITIONAL_CARDS=No�EXERCISE_ROUTINE=Yes�NUMBER_OF_CHILDREN=0"
And I got out "URL=SubsidiaryNarrative.html�B" -
Ical not storing all data & cant initialize lists
okay so im trying to store all ical data in seperate lists for hours months years and the actual event ect....it worked fine for a while but now its not storing all the events....and then when it did it would carry over from one run to another. I figured out that was probably because they were properties but when i make the lists global i get a "this variable is not initialized" problem. and even if i somehow managed to fix that its still not reading in all the data. ive been at this for 2 hours and cant see the problem. please help:
variable defs:
(*System Variables*)
global running_processes
global _weekday
global _date
global _month
global _year
global _hours
global _minutes
global _seconds
global time_ofday
(*iCal Variables*)
global iCal_Open
global iCal_Run
global iCal_Calendars
global iCal_Events
global icaleventsstore
global icaleventslast
global iCalEvents_StartMonth
global iCalEvents_StartDate
global iCalEvents_Startyear
global iCalEvents_Starthours
global iCalEvents_StartMinutes
global iCalEvents_EndMonth
global iCalEvents_EndDate
global iCalEvents_Endyear
global iCalEvents_Endhours
global iCalEvents_EndMinutes
global iCalEventsStart
global iCalEventsEnd
code to split up dates and date:
on Ref_Events()
proc()
if running_processes contains "iCal" then
(*if iCal is open do the code as normal*)
set iCal_Run to 1
set iCal_Open to 1
tell application "iCal"
set iCalEventsStart to the start date of every event in every calendar
set iCalEventsEnd to the end date of every event in every calendar
set iCal_Events to the summary of every event in every calendar
set x to 1 --holds calendar to be used
set y to 1 --holds event to be used
repeat while x is less than or equal to the number of items in iCal_Events
repeat while y is less than or equal to the number of items in item x of iCal_Events
get item y in item x in iCalEventsStart as string
set temp_date to the result
--start dates
set iCalEvents_StartMonth to iCalEvents_StartMonth & the second word of temp_date
set iCalEvents_StartDate to iCalEvents_StartDate & the third word of temp_date
set iCalEvents_Startyear to iCalEvents_Startyear & the fourth word of temp_date
set iCalEvents_Starthours to iCalEvents_Starthours & the fifth word of temp_date
set iCalEvents_StartMinutes to iCalEvents_StartMinutes & the sixth word of temp_date
--end dates
get item y in item x in iCalEventsEnd as string
set temp_date to the result
set iCalEvents_EndMonth to iCalEvents_EndMonth & the second word of temp_date
set iCalEvents_EndDate to iCalEvents_EndDate & the third word of temp_date
set iCalEvents_Endyear to iCalEvents_Endyear & the fourth word of temp_date
set iCalEvents_Endhours to iCalEvents_Endhours & the fifth word of temp_date
set iCalEvents_EndMinutes to iCalEvents_EndMinutes & the sixth word of temp_date
--event description
get item y in item x in iCal_Events as string
set temp_event to the result as string
set icaleventsstore to icaleventsstore & temp_event
set y to y + 1
end repeat
set x to x + 1
end repeat
end tell
else
(*if iCal is not open do the code then close it*)
if iCal_Run is 0 then
set iCal_Run to 1
tell application "iCal"
set iCalEventsStart to the start date of every event in every calendar
set iCalEventsEnd to the end date of every event in every calendar
set x to 1 --holds calendar to be used
set y to 1 --holds event to be used
repeat while x is less than or equal to the number of items in iCalEventsStart
repeat while y is less than or equal to the number of items in item x of iCalEventsStart
get item y in item x in iCalEventsStart as string
set temp_date to the result
--start dates
set iCalEvents_StartMonth to iCalEvents_StartMonth & the second word of temp_date
set iCalEvents_StartDate to iCalEvents_StartDate & the third word of temp_date
set iCalEvents_Startyear to iCalEvents_Startyear & the fourth word of temp_date
set iCalEvents_Starthours to iCalEvents_Starthours & the fifth word of temp_date
set iCalEvents_StartMinutes to iCalEvents_StartMinutes & the sixth word of temp_date
--end dates
get item y in item x in iCalEventsEnd as string
set temp_date to the result
set iCalEvents_EndMonth to iCalEvents_EndMonth & the second word of temp_date
set iCalEvents_EndDate to iCalEvents_EndDate & the third word of temp_date
set iCalEvents_Endyear to iCalEvents_Endyear & the fourth word of temp_date
set iCalEvents_Endhours to iCalEvents_Endhours & the fifth word of temp_date
set iCalEvents_EndMinutes to iCalEvents_EndMinutes & the sixth word of temp_date
--event description
get item y in item x in iCal_Events as string
set temp_event to the result as string
set icaleventsstore to icaleventsstore & temp_event
set y to y + 1
end repeat
set x to x + 1
end repeat
end tell
quit application "iCal"
end if
end if
if icaleventsstore is not icaleventslast then
say "new events stored in I Cal. Would you Like to View a List of all events?"
display dialog "View List of Events?" buttons {"Yes", "No"} default button 2
if the button returned of the result is "Yes" then
choose from list icaleventsstore with prompt "All the Current Events"
else
-- action for 2nd button goes here
end if
set icaleventslast to icaleventsstore
end if
end Ref_EventsYou need to be careful when using conditional statements to set global variables (the global declaration does not set any values). I can't tell from the just the one handler you posted, but an example would be the iCal_Run variable - unless it is declared somewhere else, it won't have a value if there isn't an iCal process.
-
BI 7.0 NW2004S SP7 - transport connection is not collecting all
Hi ,
I am collecting all the necessary objects and trying to transport , some of the objects like datasource or transfers structure are not getting included into the transport ? Is this some kind of bug or is there a OSS note for this ?
Thanks
HareeshHi,
Have you mentioned the tick mark for required Source systems in transport connector tool?
With rgds,
Anil Kumar Sharma .P -
I updated my mac & lost Cs6 Master Collection all data
Hello there,
Please help me :-(
I updated my mac & lost all date. So I tried to reinstallation Cs6 Master Collection of line. the download stops half way & I have been denied access for some reasons?!!! I have been trying for 3 days now & still denied access !!!!Download the most recent build from Adobe. Google brings up a link to the direct download: Adobe - After Effects : For Macintosh : Adobe After Effects CS6 11.0.4 Update
-
HyperTrends not collecting/displaying data and no alarms displayed
Hypertrends quit collecting/displaying data. Alarms are not being displayed in alarm window although alarm processing is working as evidenced by DDE link to callout software.
Is the hypertrend on the server computer or the client computer?
If you reopen the process, will it recover?
Did anything change, such as the network, the firewall?
Go to MAX to see if the data is logged in the database. What's the Lookout version?
Ryan Shi
National Instruments -
Unwrap not unwraping all data sent from server
java client server NIO ssl
At server end send about 50 packets are written using this method:
sendPacket(String packet)
writeBuffer = charSet.encode(packet);
c.ssl.outNetBB.clear();
c.ssl.engine.wrap(writeBuffer, c.ssl.outNetBB);
c.ssl.outNetBB.flip();
//write message to socket channel
while (c.ssl.outNetBB.hasRemaining())
socketChannel.write(c.ssl.outNetBB);
At the client end I read all these packets:
inNetBB.clear();
int bytesread = socketChannel.read(inNetBB);
inNetBB.flip();
requestBB.clear();
res = engine.unwrap(inNetBB, requestBB);
It seems like all the 50 packets are read into inNetBB 6000 bytes
But the unwrap only consumes 70 bytes and produces 100
This first 100 bytes is unencrypted correctly and corresponds exactly to one write of the 50 from the server. I dont know why.
Why am I getting only the first packet of the 50 sent??
[ Ive tried : while inNtBB.hasRemaining for repeated unwraps
but only the first packet is output still ]
TIA
pbutlerIf I'm reading this right, you're writing (wrapping) about 50 separate SSL packets, and then unwrapping just one.
Recall:
The SSLEngine produces/consumes complete SSL/TLS packets only, and
does not store application data internally between calls to wrap()/unwrap().So it looks to me like you need to keep unwrapping the rest of your 5930 bytes to get the remainder of the application data.
[ Ive tried : while inNtBB.hasRemaining for repeated unwraps
but only the first packet is output still ]Are you inadvertantly clearing the inNtBB before you call your additional unwraps?
If you have lots of small packets, you might want to consider buffering them up and wrapping them to the SSLEngine/SocketChannel all at once. You'll pay less in overhead. -
Emails do not download all data
Emails do not download all data
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Project Manager will not collect all files and Start a Complete New Project
As editor of several projects consisting of multiple terrabytes of footage, it's very important to me to be able to use the project manager to collect all files and start a new project. However, this is not happening!! After I've completely finished a project I should be able to save a new "trimmed" project in the desired location of choice. When I use this feature with PrPro CS 4.2.1 - I only get a partial trimmed project that when opened asks where are the missing files. I've also tried using the project manager to collect all files and move to a new location. Again, only a part of my project is being moved!!!! Earlier versions of the PpPro had no problems with this function. I've got two systems and both of them are identical in actions. Any help would be greatly appreciated!!!
BBTvHow can one do that if each project has thousands of pieces of video, text templates, music scores, photoshop documents, after effect files and so on? The number of different folders per project is almost mind boggling. Any help at all in a quick fix or update or anything would be greatly appreciated. I don't have any problem with my other editing programs and have run earlier versions of PrPro that had no problems with collecting all the files within a project and exporting them to a new location throught project manager either in trimmed or full projects. I really hate to have to start using Final Cut again because of such an easy issue. I know I'm overlooking something and any help would be greatly appreciated.
Maybe you are looking for
-
Unit of measure ST is not defined as a commercial unit
Hi Experts, While doing Punch Out catalogue in the Maintenance Order, i have received the following error "Unit of measure ST is not defined as a commercial unit". I have checked in the transaction CUNI, and ensure that the above UoM is maintained. T
-
OS X wouldn't install after accidentally installing Windows over it
My sister attempted to install Windows XP on her Macbook Pro using boot camp but some how accidentally installed Windows over OS X. I used Disk Utility to erase the drive and reformat it back to "Mac OS Extended (Journaled)" but I get the following e
-
HT1212 how do u restore an iPod that has been disabled and has never been connected to the computer
How do i restore an ipod that has been disabled and has never been conected to itunes
-
Sending Cheque as PDF attachment in Mail using F110.
Hi all, We have a requirement to send the cheque as as PDF attachment in Mail while printing it through transaction F110.Mail has to be triggered when the payment run is done through F110.Is there any config setting to do this without doing any chang
-
Drag and Drop between two windows
I would like to implement Drag and Drop between two windows for example in Windows I can take URL Address form browser and drag it and drop it in to any control that excepts String like TextField. I would like to have the same behavior with my Java T