Voice over reading only the message from notices

I want voice over to read recieved sms and emails. the thing is I want it done automaticly (wich works) but I dont want it to read any info like headlines, sender, wich app the notice is from etc, I want it to read ONLY the message. is this possible? the purpose is an art installation.

Similar Messages

Can I somehow read the messages from iPhone to my Windows PC

Can I somehow read the messages from IPhone to my Windwos PCIt. is very important because my screen broke on the iPhone and now sit I want to read my news

No way to do that.
Not on a PC. Only on a Mac (if you have Messages beta).

I have my email set at 1000 messages and it is only holding messages from the last four days, any ideas

I have my email set at 1000 messages and it is only holding messages from the last four days, any ideas

With an exchange account, it's "Mail Days to Sync":
http://support.apple.com/kb/HT2723

How to synchronously read (Not pooling) the messages from the queue

Hi,
I want to read all the messages synchronously, how do do this?
Thanks,
--Khaleel

This is not possible. SOA technology is based on services that are loosely coupled and run on their own.
If you want to implement this is to create one monolithic process that retrieves each time a message and process that.
Or create a singleton process, a process that runs on the server but can only exists as a single instance. This process gets a message, calls the process to perfrorm the action, wait on result, and process the next message.
Marc

I accidenttly deleted my notes and the icloud cleared all the message from both ipad and iphone ...How can i get it back?? If I can ??

I accidenttly deleted my notes and the icloud cleared all the message from both ipad and iphone ...How can i get it back?? If I can ??

Your notes should be stored in your backup, so if you have backed up the iPad and that backup does contain those notes that you deleted, you can try restoring from your backup. If you haven't backed up the iPad since you created those notes, they are gone.
If you backup with iCloud only, restoring from backup involves erasing the device and then going through the setup all over again and finally restoring from the iCloud backup. This article explains the process quite clearly.
http://gigaom.com/apple/ios-101-set-up-and-restore-from-icloud-backup/
If you backup with iTunes, connect the iPad to your computer, launch iTunes and right click on the device name on the left and select - Restore from Backup. But before you do that .... turn off auto sync in iTunes - without connecting the iPad - launch iTunes and go to Edit>Preferences>Devices and check the box at the bottom of that window in order to turn off auto sync.
Email messages are not stored in your backups.

In Lion Mail is there a way to keep the messages from appearing?

Sometimes I get unsavory images in my Mail that I don't particularly want my children to see if they happen to check the Mail. The Junk filter doesn't necessarily catch all of them. With the new Mail, the images show up when the message is selected, even if only to delete it. If I remember correctly, in the old Mail, there were buttons beside the message-line or heading that allowed the email to be selected without actually opening it up. These could then be deleted without opening the message. Can this still be done in Lion?

u can slide the message viewer all the way over to the RIGHT, thus hiding the message from view, and then delete at will from the expanded left column.
Message was edited by: coocooforcocoapuffs: can't tell my left from right yet.

Read only error message when trying to save updates in Acrobat 10.6.3

Hello
Hopefully I'm missing something obvious here but when I try to edit a PDF in Acrobat 10.6.3 I receive a read only error message, I have been using 'Save As' and tweaking the name each time but this seems to be a clumsy way to go about a simple save.
I am on a network and have read a previous thread that explained Adobe can sometimes be flakey on networks for saving PDFs.
Any suggestion gratefully received.

You may be stuck with copying the files locally and editing and then copying back to the network drive. I am not good with networks, but have noticed posts about network problems over the years -- often focused on specific networks. The solution is typically to deal with the PDFs locally and then copy to the network. In creating PDFs, it seems that some of the results had to do with the TMP folder usage, but I have no clue why.
As far as AA 10.6.3, you must have a cloud version or something. The latest AA is 10.1.7.

How to get the message from a Runnable class

The Schedule class is actually a JFrame, what I want to do is to "get" the message from Scheduler Class and display it in a JTextField, to let user know what is doing.
How can I approach this?
public class Schedule {
    @SuppressWarnings("static-access")
    public static void main(String args[]) throws InterruptedException {
        final Scheduler s = new Scheduler();
        Thread t = new Thread(s);
        t.start();
public class Scheduler implements Runnable{
private static int actionType;
private static String msg;
    public static void setMsg(String msg) {
        Scheduler.msg = msg;
    public static String getMsg() {
        return msg;
    public void run() {
        //System.out.println((int)(Math.random() * 1000));
        actionType = 1;
        while(true){
            try {
                switch(actionType){
                    case 1:
                        setMsg("Process actionType: "+actionType);
                        break;
                        case 2:
                        Thread.sleep(2000L);
                        setMsg("Process actionType: "+actionType);
                        break;
                        case 3:
                        Thread.sleep(2000L);
                        setMsg("Process actionType: "+actionType);
                        break;
                        case 4:
                        Thread.sleep(2000L);
                        setMsg("Process actionType: "+actionType);
                        break;
                actionType++;
                if(actionType>4){
                    actionType = 1;
            } catch (InterruptedException ex) {
                System.out.println("Scheduler.run:"+ex.toString());
}

Or with only one loop:
        int actionType = 0;
        while (true)
            actionType = (actionType % 4) + 1;
            msg = "Process actionType: " + actionType;
            try
                Thread.sleep(2000L);
            catch (InterruptedException ex)
                System.out.println("Scheduler.run:" + ex.toString());
        }

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

Acrobat read-only error message

http://forums.adobe.com/message/4117896
Hello I am following on from a previously reported issue.
We have a client who are using Adobe Acrobat 9 and have .PDF's saved in a Share Folder. Is the creator of the document but is still faced with the read only prompt when trying to save the document after making an edit (e.g rotating). Upgrading to Adobe Acrobat 9 isn't an option.
Folder permissions in both Share and NTFS is okay.
User's profile has full control of the folder it is being saved in. I've also ensured the reading pane is Windows Explorer is off when they're opening it.
Have run a repair on Adobe Acrobat 9 and tried with other documents with the same result.
Saving locally does not have the same issue.
Please advise a solution for using .PDF for Adobe Acrobat 9 in a Share Folder environment.
Server is SBS2008 and user's PC is Windows 7 Professional.
Eagerly await a fix.

I am having the same issue. Acrobat X was working fine for me for months, then out of the blue, it starts having this problem TODAY! (There must be something about the month of November when people have this problem with Acrobat! )
Each time I open a PDF file in Acrobat and make an edit, (such as highlighting text or adding a link to a web page), I cannot save the file by the same name. I get the "read only" error message:
"The document could not be saved. The file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder."
I installed the latest updates for Acrobat after this problem occurred, but the "read only" error message persists. In a previous thread, one person suggested turning off Acrobat's Protected Mode by going to Edit/Preferences/General and unchecking the Enable Protected Mode At Startup. I do not see this option in Acrobat X.
The only work-around I've found is to save the PDF file with a temporary name, then after making the edits in Acrobat, save the file as the original name that you wanted the file to be in the first place.
I'd rather not have to mess with work-arounds. I just want to make this problem go away. Any help or suggestions would be appreciated!
regards,
ChristyGTWE

Dequeue with OCCI does not remove the message from the queue

Hey there,
I have this problem where no matter what dequeue option I try the messages never seem to be removed from the queue... I tried looking around and found only a similar un-answered question...
Thanks in advance...
void TryAnydataDequeue(oracle::occi::Connection * conn)
     try
          std::cout << "Dequeue Commence..." << std::endl;
          Consumer cons(conn);
          //Settings de dequeue
          cons.setCorrelationId("SPPC");
          cons.setQueueName("Anydata_queue");
          cons.setConsumerName("SNOOP");
          cons.setDequeueMode(cons.DEQ_REMOVE);
          //cons.setDequeueMode(cons.DEQ_LOCKED);
          std::cout << "Reception du message..." << std::endl;
          Message m2 = cons.receive(Message::ANYDATA);
          AnyData any(conn);
          any = m2.getAnyData();
          if(!any.isNull())
               oracle::occi::TypeCode type = any.getType();
               if(type == OCCI_TYPECODE_VARCHAR2)
                    std::string msg = any.getAsString();
                    std::cout << "Message Reçu: ";
                    std::cout << msg << std::endl;
               else
                    std::cout << "Format du message invalide..." << std::endl;
               std::cout << "Fin du message... (Press a key)" << std::endl;
          else
               std::cout << "Message invalide..." << std::endl;
          System::String * theInput = System::Console::ReadLine();
     catch(SQLException ex)
          std::cout << "Exception: " << ex.getErrorCode() << " - " << ex.getMessage() << std::endl;
          System::String * tnput = System::Console::ReadLine();
}

The message from the queue will be removed when you do a commit after a successful dequeue call, depending upon your message retention settings.
After you have done this processing and successfully performed a commit, what is the output of the following query:
SQL> connect AQADMIN/password
SQL> select msg_state from aq$<your_queue_table_name_goes_here> ;?
If it is PROCESSED, check your queue retention settings.
Additionally, make sure that the init.ora parameter AQ_TM_PROCESSES is set to a NON-ZERO value for this to happen.

Reading/Writing the "wpproperty" from portal LDAP

Hi,
We want to read/write the "wpproperty" from portal LDAP. I found the code for EP60.
IUser user = request.getUser();
String itar[] = user.getAttribute("com.sap.security.core.usermanagement","wpproperty");
newUser.setAttribute("com.sap.security.core.usermanagement",
"wpproperty", value);
Does anybody have an example for <b>EP50</b> code?
Kind regards,
Onno

I think the answers you got over [url http://forum.java.sun.com/thread.jsp?thread=524137&forum=54]here were excellent. You should now know that Java is a terrible language for this kind of thing. You would be much better off with some kind of a native language like C++. Even then, you are going to have to get heavily into the internal Windows system to get what you want from another application and I can't even imagine what you would have to go through to get it out of IE.
Anyway, I doubt you are going to find what you are looking for in the 'New To Java Technology' forum. You might be able to find something like this if you found a 'Hacker Forum' with people on it who had spent the time to find out how to steal information from other programs (probably at least a couple of years) and didn't mind if they got invovled with someone who might be talking to the FBI shortly.
Your only other option would be to spend the year or two it would take you to learn enough to do it yourself.
Good Luck.

How to stop reading foreign queue message from MDB using weblogic 6.1? thanks,

Hi, I am using weblogic 6.1 to communicate with IBM MQseries foreign
queue. I use the asychronous way "onMessage()"(properly the only
known way) to listen the messages from the queue. I like to stop
receiving messages if my south bound stream has problems and not able
to process the message, I would like to stop fetching the message with
my MDB(message driven bean) untill the down stream problem is cleared.
As weblogic uses container to create the multiple session and
connections internally, how can I efficiently stop the message
delivery, do I have to locate all the connections and issue
connection.stop()for each one, or there is better way to do this.
Thanks in advance.

If you never use FaceTime on your Mac, open the FaceTime app on it and sign out. Also, the following instructions are from Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
Turn off iPhone cellular calls
To turn off iPhone cellular calls on your iPad or iPod touch, go to Settings > FaceTime and turn off iPhone Cellular Calls.
On your Mac, open the FaceTime app and go to FaceTime > Preferences. Click Settings and deselect the iPhone Cellular Calls option.

The message from Unknown sender concerning " Unknown subject " has not be

I am getting the following message, "The message from <Unknown sender> concerning “<Unknown subject>” has not been downloaded from the server. You need to take this account online in order to download it."
This is all that is in the body of the message. No subject, or sending address. No header exists at all just the above message in the body. Weirder still, I can't get rid of the message. If I delete it, it reappears. I've tried quitting, restarting, and installing another copy of Mail.
I'm totally stumped.

This is one of the many bogus error messages in Mail that usually have absolutely nothing to do with what the problem really is. Don’t try to make sense of it. What the error message really means in the case of Mail 2.x is that Mail cannot find the *.emlx file associated with the message where the index says it should be.
Have you tinkered recently with the contents of ~/Library/Mail/ or done anything that could have a bearing on this?
Report the names of the files and folders present at the first level of the ~/Library/Mail/POP-username@mailserver/ account folder in the Finder.
In order to post the exact file names and avoid typing mistakes, proceed as follows. In the Finder, go to ~/Library/Mail/POP-username@mailserver/. With that folder open, if you’re looking at it in View > as List mode, first collapse any expanded folders so that the Finder only shows the files and folders at the first level. Now, do Edit > Select All (⌘A), then Edit > Copy (⌘C), and paste it in your reply to this post.
Report also the contents of the mailboxes that have this problem.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

Get back the Message from JMS Topic

Hi,
I want to Process message came to the JMS topic (say for past 10 days) in PRODUCTION environment . Is there any way i can get those messages from Persistent Store(File/JDBC).Any sugesstions????
thanks in advance...

As far as I think you can not directly read messages from persistence store without putting the message integrity at stake.
Also, do you know if the messages are actually in the persistence store? Messages will persisted by the Topic only if there is any durable subscriber is there which has not read those messages. If there are no durable subscribers or if all durable subscribers have read their copy of the message from Topic the messages will be removed from persistence storage.

Voice over reading only the message from notices

Similar Messages

Maybe you are looking for