VoIP CallManager 4.1, Run report on someone's long distance

I need to run a report on an extension (ie x6108) to see all the long distance calls that they have made. (Second to this would be local calls.) I am also using a Unity server 4.0 Build 4.0(5). Thanks for your help.

Hardware:
1. You may have it already, if not need to have a router at remote office to establish IP connectivity (site-site VPN).
2. Need Layer2 PoE switch to power up the phones and provide connectivity to the network.
Select the Switch model best suitable to you depending upon the number of users (or IP Phones at remote office).
Configuration:
1. Configure DHCP service on local router at remote office. Phones will get IP-address as well as CallManager address as option 150 ip parameter from DHCP configured on the router and get registered with CallManager located at HQ office.
2. Configure new device pool and other parameters on the CallManage for remote office.Choose right codecs and pay special attention to bandwidth requirements depending upon the number of expected simultaneous calls between the offices.
3. Trivial things like assigning extension numbers and related settings.
4. Implement and configure QoS on the remote office if you are planning to run data as well.
Optional:
1. For redundancy, during WAN network outage. Configure SRST on local route on remote office to continue support basic telephony during WAN outage.
2. May need Voice modules on the router, if you are planning to provide local pstn connectivity at remote office. You'll need to configure and implement dial-plan carefully on the CallManager.

Similar Messages

Can you share your itunes with someone over long distance

can you share your library with someone that isn't on the same wifi network as you?

No. Same wifi and same Apple ID is needed.

Error - Object variable or with block variable not set while running report

Hi,
I am trying to run BEx reports through portal.
However I am not able to run any report. I am getting following error.
"Run time error '91':
Object variable or with block variable not set"
This is not BEx installation or excel issue as I am not able to run reports using someone else's desktop also.
Also I have authorization to those reports. So doesn't seem to be authorization issue.
Please help me to resolve this problem.
Thank you in advance.
Regards,
Deepti Jain.

Hi Deepti,
Can i knw how you solved this issue?
Regards,
Maili

Can't run report in ASYNCHRONOUS mode

Hi All,
I'm trying to make a report run in ASYNCHRONOUS mode. I want to press a button on a form, submit the report to the reports server and be able to navigate within the form while the report is being executed on the reports server.
My problem is, no matter what mode I choose (ASYNCHRONOUS or SYNCHRONOUS), the mode ALWAYS ends up being SYNCHRONOUS. After I press the button (code below), I get the hourglass and I can't navigate within the form until the report is finished. Then I can view it.
The reports server I'm using is installed locally on the same PC I'm testing the form.
Can someone help me please? I'm using using Forms Builder 9.0.2.9.0.
Thank you,
Artur
declare
v_repid REPORT_OBJECT;
v_rep in varchar2(100);
begin
v_repid := find_report_object('TEST');
SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_COMM_MODE, ASYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESTYPE, 'CACHE');
SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESFORMAT, 'PDF'); -- OR HTMLCSS
SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_SERVER, :TI_REPORTS_SERVER); -- local pc reports server
v_rep := RUN_REPORT_OBJECT(v_repid, v_param_list);
end;

Arthur,
Communication mode is soemthing forms handles when calling the run report object. Your code looks fine. You might get a quikc answer if you can post this in Forms mailing list
Thanks
The Oracle Reports Team

Long running reports end successfully - present s "page can not be found"

Long running reports and browser timeouts - page can not be found"
We are launching Oracle 9i Reports from a Portal 9ias (release 9.0.2.2) system. We are in production with about 100 users. It is not going well with respect to Report problems.
We have the following problems:
1) hanging reports,
2) reports where parameter screens will not present due to large LOV on parameter screen,
3) and the most aggravating problem is "Page can not be found" presented to user when in fact the report ran successfully and create a .pdf.
We are at our wits end with Oracle Support and the Oracle Portal and Reports product.
As I said, I am launching Oracle Reports 9i from a Portal 9.0.2.2 application. I have several long running reports that complete successfully but return to the user an error "Page can not be found". Meta-link Note: 189454.1 suggests a modification to ReceiveTimeout parameter in the pc registry. We set the ReceiveTimeout parameter to 7200000. This did not solve the problem. Users still receive "Page can not be found".
Is there a report server side setting that we must set also ... or some other setting we should check?
I need to solve this issue. Is there someone out there that can help? Are there other people having similar Oracle Reports issues? According to Oracle Support we are the only people with these issues. Are we?

1) If you can reproduce the Reports Hanging issue consistently you can push Oracle Support to file a bug.
2) I am not sure about this now, but again you can take this to Oracle Support and push for resolution.
3) There are some problems with IE - Adobe integration. This is not a Reports bug. You can try
(a) Switching off Adobe - web integration in Adobe Acrobat reader settings, so that Adobe will not automatically open pdf file in web. Instead a dialog will be shown as to which application to open the pdf file or save it to disk and user can save the file to disk and open.
(b) Use IE latest version. (or some other browser like Netscape )
[ You can roll back the ReceiveTimeout param change you made to see the impacts one at a time ]
1) To confirm that this is a Adobe - IE pdf problem run the same report to htmlcss, rtf. If these come fine, then we can ascertain that this is Adobe - IE issue.
2) Give http://host:port/reports/rwservlet/showjobs?server=server_name. You can see all the jobs and their jobids. For the concerned jobs you can click and see whether output is actually generated or not.
Thanks
The Oracle Reports Team
The statements and opinions expressed here are my own and not that of my employer

FRM-41214: Unable ro run report while calling a report from a form in 9iDS

Am in the process of migrating from Developer 6i client/server to Developer 9iDS on Windows 2000.
I have read through the various postings on this issue & have made changes accordingly. I also referred to the white paper on the Forms/Reports integration.
As I am trying to do a prototype, am compiling my forms/reports on my local machine & not on the apps. server.
I installed a report server on my local machine as,
rwserver -install 9irep
I have defined this as a NT service and it is up & running & so is my OC4J instance.
I have defined a reports object in my Form Builder & set Report Server=9irep,
Destype=Cache,
Execution mode=runtime
Communication_mode=synchronous.
I also removed the /security tag from the <report server>.conf file as suggested in the white paper. Also set the single sign-on to NO for the reports service.
I have replaced my run_product with the run_report_object built-in as follows.
Declare
report_id REPORT_OBJECT;
report_status VARCHAR2(255);
rep_job_id VARCHAR2(255);
Begin
report_id := FIND_REPORT_OBJECT('KS'); --Created in form under node "Reports"
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,'C:\Kalpana\9i_Prototype\ISSMDLCUST.rdf');
rep_job_id := RUN_REPORT_OBJECT(report_id);
report_status := REPORT_OBJECT_STATUS(rep_job_id);
WHILE report_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
report_status := REPORT_OBJECT_STATUS(rep_job_id);
END LOOP;
message(report_status); pause;
IF report_status='FINISHED' THEN
Web.Show_Document('http://houwdisndgd01:8888/reports/server/getjobid='
||rep_job_id||'?server=ks');
END IF;
End;
I get an error message "FRM 41214: Unable to run report" right after the call to run_report_object.
Can someone please tell me where am going wrong with my run_report_object built-in? (I also need help writing my web.show document to point it to my local machine/folders).
Thanks
Kalpana

How I have implemented the same and works
Local OC4J is running.
I established a reports server "repserver90" as a service.
I created a report named "C:\TMP\TMP\test_report.rdf"
I created a form with a Reports object with properties:
Name: "EMP"
Filename: "C:\TMP\TMP\test_report.rdf"
Execution mode "Batch"
Communication mode "Sychronous"
Report Destination Type "Cache"
Report Destination Format "HTML"
Report Server "repserver90"
I call the report with the procedure:
PROCEDURE TEST_REPORT IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := find_report_object('EMP');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'html');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'repserver90');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no pdeptno='||:dept.deptno);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://localhost:8888/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
END;
Minas

Issue with running reports on the portal

Hello Guyz
1. I have a question regarding running reports on the portal.
2. I have standard web templates that have been installed in BI.
3. But in the portal, we are not able to run these reports.
4. Do we need to create custom I-Views or can we install them from business content?
5. Can someone explain the process to me AND also any other issues that we might have?
Thanks.

Hi Srinivas,
Standard web templates doesnot get installed with attached queries.Create custom web templates in WAD and attach ur queries based on the type of display u like either tabular or graphical.In order to diplay in portal you have to attach webtemplates to iViews and then group iViews to worksets and attach to portal roles.Then add those roles to portal users.From BI Prospective u just create web-templates and give technical names to EP consultants if you have any then they can takecare of rest.If you want to call standard web template 0ANALYSIS_PATTERN from portal you need to have Business Explorer role added to ur user in EP.Using that template u can only open one query at a time and execute.Hope its clear
Chandu

Problems with running reports having parameters, on the web

Dear all,
I have recently installed Oracle 9iAS v1.0.2.2.1 on Suse linux 7.3. Also, installed
Forms and Reports 6i alongwith it.
Building and running reports both static and ones that accept parameters was a breeze.
I could also run reports from the web successfully until now when I am trying to run a
report that accepts parameters.
When I enter the following URL:
http://<webserver>/cgi-bin/rwcgi60?report=<some.rdf >userid=<user/passwd@db>
server=<reportservername>destype=cachedesformat=html+paramform=yes
This is what happens:
1. I am prompted for a parameter value in the html format
2. On entering a suitable value, I am prompted for information to connect to the
database viz. username, password and database name
3. Entering suitable values for the above results in a hung state. There is no output and
the busy signal is all that I get for a long long time.
4. Also, stopping this session results in other such sessions resulting in a hung state, too.
That is to say, if I had run a report throug the web successfully before trying this
one, after aborting this session, I cannot re-run the previous successful report. That
too results in a hung state. I have to restart the reports server rwmts60 once again
as well as the web server for things to work smoothly.
I tried recreating the cgi env and ran a strace on the rwcgi60 command. It produces
an error saying 'libzrc60.so.0: no such file or directory' where as it is very much
present in the default LD_LIBRARY_PATH. This could be misleading as I am not sure
how I correct I was in re-creating the CGI env.
This is a problem I face only when I enter the "paramform=yes" option in the URL.
Also, excuse me for my ignorance , but I have no idea how to interpret the cgicmd.dat file.
It does mention that %P, %PT, %PC are amongst the currently recognised special
parameters, though.
Will someone please help me out asap as this is quite urgent.
Thanks a million in advance
Hema

Hi Hema,
There could be various things that explain this, but from your symptoms it looks like the engine is hung processing this report. This could be as simple as a PL/SQL trigger that is in an infinite loop. Anyway, a simple thing to do is to add TRACEFILE=filename&TRACEMODE=append&TRACEOPTS=TRACE_ALL onto your URL. This will create the specified file and dump information into it about what Reports is doing as it is processing your report. If it is hung in an infinite loop, you should be able to see how far it got when you kill it.
Also, you can see the status of the reports job queue by using the http://.../rwcgi60?showjobs command. If the report is executing forever, you'll see it sitting there in the job queue.
regards,
Stewart

Ability to run Reports on Media Download items... (Enhancement Request)

I would like to suggest that ABC consider enhancing the Reports section to allow users to run reports on the Media Download items. I have a client that is interested in tracking their download activity of whitepapers and brochures off their website, and while you can go to each of the individual items and see the activity in a graph, this is limiting in a number of ways.
Activity is not able to be pulled into their own reporting system and they have to manually re-enter the numbers based on day, month, etc... to get the information. We should be able to export the information and have it pulled down via CSV like other statistics on the site.
It's cumbersome and time consuming to have to go to each individual item and look at the "Activity" one at a time. If this were added to the Reports section, users could go in and review the Media Downloads (in total) to see how many times information is being pulled off their site, but then use the sort/selection options to quickly jump to each of the individual Media Download items. As with #1, it would also be advisable to have this data exportable into a CSV file so that it can be used in Excel, then sorted that way.
It would also be good to add the Media Downloads as an option to the Custom Reports area, so that a client could save certain search options to pull specific sets Media Download items to see what's being downloaded from their site.
Hopefully this can get some traction in the ABC community, or if someone out there is aware of how to do this otherways, please let me know. I did chat with SBC support via Chat and they indicated that what I wanted to do was not possible at this time.
Thanks,
Eric

Eric- While you are waiting for this feature to be added to reporting-- have you tried using Google Analytics Event Tracking to track the downloads? You'll get an accurate representation of downloads if you hook that up.
For more information on Event Tracking see: https://developers.google.com/analytics/devguides/collection/gajs/eventTrackerGuide
You might, for instance, make sure all your Media Download links have a class of "media-download" and using javascript can track a "Download" event when those links are clicked.

Problem running reports using webutil in Forms 10g

This is about 3 dll files related to webutil functionality in forms 10g
d2kwut60.dll
jacob.dll
JNIsharedstubs.dll
I am running report which is using webutil functionality. So when I try to run report, our application server try to download above dlls to my local machine on path C:\Program Files\Java\jre6\bin
Due to security policy, our company doesn't allow write access to folder C:\Program Files\Java\jre6\bin and hence report is failing to run.
We need solution for this issue so that we should be able to run report successfully?
Details as below:
Application server : Forms 10g - 10.1.2.3 ( Using Sun jre and not jinitiator). We do not want to use jinitiator
Browser - IE8

Curious, typically Java will store these "temporary" files in the cache not in the BIN directory. Unfortunately, the only way I know to change the location of the CACHE (temporary files) directory is through the Java Control Panel applet. Open the Control Panel and start the Java Control Panel. On the General tab click the Settings... button in the Temporary Internet Files section. In the Location section - click the Change button which will bring up a "Temporary Files Location" dialog box. Simply navigate to a directory that your security policy will allow files to be written too.
The ideal solution would be to push this type of change out to all of your users rather than have to manually change each workstation. I don't know if there is a way to push this change out, but you can check the Java website for more information.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Error when run report 10g (10.1.2.0.2) with Paper parameter form

Dear Friends
I just installed Developer suite 10g and Database 10g on my pc (10.1.2.0.2) when I run report in Report builder with paper parameter form (I selected only one system parameter : Destination type) I got the message
Reports Error Page
Fri Apr 07 09:06:01 GMT+07:00 2006
javax.servlet.jsp.JspException: REP-56092: No class defined for destination type Screen
How to solve it? Please give me the instruction or Oracle link that I can get the documents. If someone has the white paper .pdf please give me.
Hope with help
Thanks & Best regards,
Bansak K.
[email protected]

Thanks for the tip.
Correct me if I am wrong but you have set up SLED SP1 connecting to an OS like (RHEL 4/OEL 4,SuSE 9) using VMWare Server. What OS is SLED?
I chose SUSE 10.3 as its free and I want to set up apps server for purely training purposes. Do you know of a free linux OS that is certified to run AS 10g 10.1.2.0.2?
Thanks
Jon

How to run reports thru menu in 10g

Hi,
I'm a junior oracle programmer and have already migrated forms 6i to 10g. Now I have to migrate the reports to 10g. I have read many documentations about running report from forms or menu, but the more I read, the more confused I get. Please note that I am very new to all this oracle stuff. So please bear in mind that I might not understand everything too well. Thats the reason I would like help from you experts out here.
We have a menu (mmb) which has two horizontal sub menus (eg. Forms & Reports). Now Forms and Reports again in turn hv couple of vertical sub menus. Each vertical submenu under Forms calls a form (for eg. submenu_f1 calls forms1, submenu_f2 calls forms2 and so on). Same thing for Reports (eg. submenu_r1 calls report1, submenu_r2 calls report2, etc). Now this is what we want for the Reports. Each of our report has parameters like Begin Date, End Date, Agency_Type, Year, etc. We want our user to have one more choice in the parameters "FORMAT" (pdf, excel, html, etc) . Now this is what I dont know how to do. I cannot use run_report_object here cause I cannot create a report object in menu (like how we can do it in forms). I tried web.show_document but the problem in this is that everything is hard-coded, so I cannot give a choice in the desformat.
I would appreciate if someone can tell me how to run my report thru menu and give the user the option for the format. The users mostly want the output in excel (but might want pdf, etc too).
Plus we want to schedule certain reports to run at certain times everyday or every month, how can I do that?????
Any help would greatly be appreciated.
Thanks in advance for taking your time to reply my query.

Hi,
cannot use run_report_object here cause I cannot create a report object in menu (like how we can do it in forms).
Create a generic named Report node in the forms that you reference from the RunReport object request. This way you can run Reports from a menu
Frank

REP-1247 when running Report

Hi,
I am trying to run reports in Application Server 10.1.2.0.2. When I try to run any report using the 'rdf', I get the error " Terminated with error: <br>REP-771: There exist uncompiled program unit(s). REP-1247: Report contains uncompiled PL/SQL "
The problem occurs if I first try to run a report after rebooting the reports server. But the problem disappears if I run the report again. Running the same reports in Oracle 6i works always fine.
Could someone help me solve this issue.
Regards,
Xosu

Hi,
I searched in internal knowledge database but could not find any problem like yours which is very generic.
There were some specific issues which occurred for specific type of reports, but in your case it happens for all rep files with PUs.
1) Is it occurring for all reports or some specific types of report ?.
2) Is there an attached library (.pll file) to your report ? If yes , then its location (.pll file's location) should be in REPORTS_PATH env variable (in registry for windows, env variable for unix)
3) Silly suggestion, but to make sure, there should be an active DB connection
Other than this I suggest you to get in touch with oracle support to handle this issue (if you have a support contract)
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

How to run report that's embeded into my form

My apps is r12, Could everyone help me run report thats included into form.
it's show on HTML web, isn't it ?
Thanks

Can you describe your requirement in more detail? Reports in the Oracle Enterprise Business Suite (EBS) run through the Concurrent Manager. How is your report ebmedded in your Form? Are you following EBS guidelines for your Forms development? You might want to take a look at the Oracle Applications Documentation library. Select your EBS version and then scroll to the Standards section and review the following documents:
<ul>
<li>Oracle Applications Developer's Guide
<li>Oracle Applications User Interface Standards for Forms-Based Products
<li>Oracle Application Framework Personalization Guide
</ul>
Also, this forum is for general Oracle Forms questions. EBS related questions should be posted in the General EBS Discussion forum. If you have a general Forms question, by all means, ask it here! ;-)
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Maxmize window when run Report builder 10gR2

Thanks in advance to all,
I have read of a post in which he treated maxmize window when run Report builder 10gR2, but I don't succeed in finding it. Can someone point out me the link?
PS. I have already post on Form Forum

Thanks for your reply.
But i was speaking maxmize window of report builder application on WIN xp, because when i
exe rwbuilder i always,have to maxmize window.
I know that it is a fool problem, but if to someone it happens and he had resolved...
Howevar thanks for your time

VoIP CallManager 4.1, Run report on someone's long distance

Similar Messages

Maybe you are looking for