VOIP: SIP UDP SOCKET ERROR

Hi Guys,
IM currenty troubleshooting our Cisco 5400 Voice Gateway. Im getting an error like this on my cisco router when i enabled the sip debugging in Cisco. Anyone know this error below? Our proxy cant connect to the cisco and getting timed-out error. It keeps on sending INVITE from the cisco but the cisco displayed this error and the proxy timed-out. Anyone can help me would be much appreciated.
Mar 29 11:52:41 24216: Mar 29 17:05:31.925: sip_udp_sock_process_read: Unexpected error on Connid 0 in socket_recv with status : 0
Mar 29 11:52:42 24217: Mar 29 17:05:32.565: sip_udp_sock_process_read: Unexpected error on Connid 0 in socket_recv with status : 0
Mar 29 11:52:42 24218: Mar 29 17:05:32.889: sip_udp_sock_process_read: Unexpected error on Connid 0 in socket_recv with status : 0
Mar 29 11:52:47 24459: Mar 29 17:05:35.949: sip_udp_sock_process_read: Unexpected error on Connid 0 in socket_recv with status : 0
Mar 29 11:52:49 24776: Mar 29 17:05:40.025: sip_udp_sock_process_read: Unexpected error on Connid 0 in socket_recv with status : 0
Mar 29 17:05:56.593: sip_udp_sock_process_read: Unexpected error on Connid 0 in socket_recv with status : 0

Yes, the router is configured correctly. It was working before then suddently getting timed-out from my sip proxy.
Also, here's another log i got
Mar 30 15:22:56 159141: Mar 30 20:35:48.045: UDP:
dropped copy; queue full
Mar 30 15:22:56 159142: Mar 30 20:35:48.045:
sip_udp_sock_process_read: Unexpected error on Connid 0 in socket_recv
with status : 0
Mar 30 15:22:57 159146: Mar 30 20:35:48.665: UDP: rcvd
src=63.116.254.93(5060), dst=255.255.255.255(5060), length=8
Mar 30 15:22:57 159147: Mar 30 20:35:48.665: UDP:
dropped copy; queue full
Mar 30 15:22:57 159148: Mar 30 20:35:48.665:
sip_udp_sock_process_read: Unexpected error on Connid 0 in socket_recv
with status : 0
Mar 30 15:22:59 159160: Mar 30 20:35:51.725: UDP:
dropped copy; queue full
Mar 30 15:22:59 159161: Mar 30 20:35:51.725:
sip_udp_sock_process_read: Unexpected error on Connid 0 in socket_recv
with status : 0
Mar 30 15:23:03 159177: Mar 30 20:35:55.805: UDP:
dropped copy; queue full
Mar 30 15:23:03 159178: Mar 30 20:35:55.805:
sip_udp_sock_process_read: Unexpected error on Connid 0 in socket_recv
with status : 0
Mar 30 15:23:04 159183: Mar 30 20:35:56.677: UDP:
dropped copy; queue full
Mar 30 15:23:04 159184: Mar 30 20:35:56.677:
sip_udp_sock_process_read: Unexpected error on Connid 0 in socket_recv
with status : 0
Mar 30 15:23:07 159199: Mar 30 20:35:59.881: UDP:
dropped copy; queue full
Mar 30 15:23:08 159200: Mar 30 20:35:59.881:
sip_udp_sock_process_read: Unexpected error on Connid 0 in socket_recv
with status : 0
Mar 30 15:23:16 159247: Mar 30 20:36:08.041: UDP:
dropped copy; queue full
Mar 30 15:23:16 159248: Mar 30 20:36:08.041:
sip_udp_sock_process_read: Unexpected error on Connid 0 in socket_recv
with status : 0
Mar 30 15:23:20 159270: Mar 30 20:36:12.122: UDP:
dropped copy; queue full
Mar 30 15:23:20 159271: Mar 30 20:36:12.122:
sip_udp_sock_process_read: Unexpected error on Connid 0 in socket_recv
with status : 0
Mar 30 15:23:24 159298: Mar 30 20:36:16.202: UDP:
dropped copy; queue full
Mar 30 15:23:24 159299: Mar 30 20:36:16.202:
sip_udp_sock_process_read: Unexpected error on Connid 0 in socket_recv

Similar Messages

IP SLA UDP-ECHO socket error

have this configuration on ASR1002F router. Trying to setup IP Sla so that we can monitor the delay on WAN interfaces. Would like to send UDP-ECHO from one router to another across the WAN. I need to send and receive on fixed port numbers. Keep getting socket errors. any ideas on what i need to do?
no ip sla 5
ip sla 5
udp-echo <dest ip> 65000 source-port 65000 control disable
frequency 5
ip sla schedule 5 life forever start-time now
exit

Was there a "source-ip xx.xx.xx.xx" portion on the "udp-echo 65000 source-port 65000 control disable" line?

Send ArrayList through UDP socket

I have the following 2D ArrayList
ArrayList<ArrayList<Integer>> myList = new ArrayList<ArrayList<Integer>>();How is it possible to send it through a UDP socket and then get it back?

Apart from adding implenents Serializable after the class name what else i have to do in order to add the arraylist to the datagramSocket?
For simple sockets i have found this
http://java.sun.com/developer/technicalArticles/ALT/sockets/ but
but it doesn't work for DatagramSocket
ObjectOutputStream oos = new ObjectOutputStream(socket.getOutputStream()); throws an error "The method getOutputStream() is undefined for the type DatagramSocket"
Edit: It seems this site has the solution
http://www.nada.kth.se/~bishop/resources/javaSerial/index.html
Message was edited by:
[email protected]

H.245 Socket Error

Hello
Im often get the following error in the CDR_log:
Participant "No" (<<IP>>) left the conference
Disconnect reason "H.245 socket error"; Time in conference <Time> ; Participant called in; Protocol "H.323"; Media encryption status "encrypted"
Any Ideas how i can handle this Problem?
Are there any Options/ tools to check where the Problem occurs?
Is this a Problem of an endpoint, or network, system- MCU etc.?
Somtimes i got this error from external endpoints which are connecting to our mcu
Thanks in advance
BR
Alex

Hello
I set the VCSE on log level 3, now im getting a H.225 Error. I ll post the last Logentires from the VCSE.
May 29 13:35:35
tvcs: Event="Call Disconnected" Service="H323" Src-ip="Endpoint A IP" Src-port="11010" Src-alias-type="H323" Src-alias="Endpoint A" Src-alias-type="E164" Src-alias="114312" Dst-alias-type="H323" Dst-alias="
DST-Alias" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="1" UTCTime="2013-05-29 11:35:35,755"
May 29 13:35:30
tvcs: Event="Message Received" Service="H.225" Message-type="DRQ" Src-ip="Endpoint A IP" Src-port="1719" Dst-ip="VCSE_IP_A" Dst-port="1719" Call-serial-number="SN" Tag="TAG" Protocol="UDP" Level="2" UTCTime="2013-05-29 11:35:30,767"
May 29 13:35:28
tvcs: Event="Message Sent" Service="H.245" Message-type="EndSessionCommand" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,770"
May 29 13:35:28
tvcs: Event="Message Received" Service="H.245" Message-type="EndSessionCommand" Src-ip="Endpoint A IP" Src-port="11011" Dst-ip="VCSE_IP_A" Dst-port="15340" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,770"
May 29 13:35:28
tvcs: Event="Message Sent" Service="H.245" Message-type="CloseLogicalChannelRequest" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Detail="LCN:3" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,486"
May 29 13:35:28
tvcs: Event="Message Received" Service="H.245" Message-type="CloseLogicalChannelRequest" Src-ip="Endpoint A IP" Src-port="11011" Dst-ip="VCSE_IP_A" Dst-port="15340" Call-serial-number="SN" Tag="TAG" Detail="LCN:3" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,486"
May 29 13:35:28
tvcs: Event="Message Sent" Service="H.245" Message-type="CloseLogicalChannelRequest" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Detail="LCN:2" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,485"
May 29 13:35:28
tvcs: Event="Message Received" Service="H.245" Message-type="CloseLogicalChannelRequest" Src-ip="Endpoint A IP" Src-port="11011" Dst-ip="VCSE_IP_A" Dst-port="15340" Call-serial-number="SN" Tag="TAG" Detail="LCN:2" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,485"
May 29 13:35:28
tvcs: Event="Message Sent" Service="H.245" Message-type="CloseLogicalChannelRequest" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Detail="LCN:1" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,479"
May 29 13:35:28
tvcs: Event="Message Received" Service="H.245" Message-type="CloseLogicalChannelRequest" Src-ip="Endpoint A IP" Src-port="11011" Dst-ip="VCSE_IP_A" Dst-port="15340" Call-serial-number="SN" Tag="TAG" Detail="LCN:1" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,479"
May 29 13:35:23
tvcs: Event="Message Sent" Service="H.245" Message-type="KeepAlive" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:23,125"
May 29 13:35:03
tvcs: Event="Message Sent" Service="H.245" Message-type="RoundTripDelayRequest" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:03,475"
May 29 13:35:03
tvcs: Event="Message Received" Service="H.245" Message-type="RoundTripDelayRequest" Src-ip="Endpoint A IP" Src-port="11011" Dst-ip="VCSE_IP_A" Dst-port="15340" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:03,475"
May 29 13:35:03
tvcs: Event="Message Sent" Service="H.245" Message-type="KeepAlive" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:03,124"
May 29 13:34:43
tvcs: Event="Message Sent" Service="H.245" Message-type="KeepAlive" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:34:43,124"
May 29 13:34:37
tvcs: Event="Message Sent" Service="H.245" Message-type="MiscellaneousCommand" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Detail="VIDEO_FAST_UPDATE_PICTURE" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:34:37,275"
May 29 13:34:37
tvcs: Event="Message Received" Service="H.245" Message-type="MiscellaneousCommand" Src-ip="Endpoint A IP" Src-port="11011" Dst-ip="VCSE_IP_A" Dst-port="15340" Call-serial-number="SN" Tag="TAG" Detail="VIDEO_FAST_UPDATE_PICTURE" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:34:37,275"
May 29 13:34:33
tvcs: Event="Message Sent" Service="H.245" Message-type="RoundTripDelayResponse" Src-ip="VCSE_IP_A" Src-port="15340" Dst-ip="Endpoint A IP" Dst-port="11011" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:34:33,480"
May 29 13:34:33
tvcs: Event="Message Received" Service="H.245" Message-type="RoundTripDelayResponse" Src-ip="VCSE_IP_B" Src-port="2776" Dst-ip="VCSE_IP_A" Dst-port="15341" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:34:33,480"
The Log says that the Codec sent an "End Session Command" but the MCU says H.225 Socket Error.
Are there any Timeouts for Keep alive or something?
Thanks for Your Answer.

Listening to 2 UDP sockets at the same time

I would like to know if it is possible to listen to two different UDP sockets at the same time without loss of any packets? If so, will the data be buffered ? How do we limit the buffer size on a Windows XP host?

gprassad,
You can use two parallel UDP Read functions working in a loop. Set a timeout to low value and clear the timeout error if it occures. Data transferred by UDP protocol is buffered by operating system and the user has no direct way to change it in LabVIEW.
Arkadiusz Roszczewski
National Instruments

When I try to log on to my ichat I get the error message "An undefined AIM socket error has occurred.". How do I resolve this?

The error message "An undefined AIM socket error has occurred." comes up when I try and log on to ichat.

I have the same issue. Does anybody know why this has happened

If I copy the "lcds" folder, Tomcat starts with socket errors

In the documentation it is said that when you create a new server-side application, you can start by copying the 'webapps/lcds' folder. I did that but then, Tomcat starts with some socket errors:
[LCDS]SocketServer 'my-rtmp-SocketServer' failed to pre-validate desired socket settings for BindSocketAddress: 0.0.0.0:2038
java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind
[LCDS]SocketServer 'my-rtmp-SocketServer' failed to start.
flex.messaging.LocalizedException: SocketServer 'my-rtmp-SocketServer' cannot bind to accept client connections on port '2038' because another process has already bound the port. Please ensure that multiple endpoints across all applications are not configured to use this same port.
Am I doing something wrong?
Thanks,
Borek

What is happening is that you are getting a port conflict for the socket-based NIO and RTMP endpoints used in the channel definitions in the services-config.xml file of your new web app. The issue is that you have endpoints bound to the same port in the LCDS web and in your new web app.
You can deal with this one of two ways:
Option 1: In that services-config.xml file, search on "RTMP" and "NIO" to find the channel definitions and change the port numbers to something slightly different than the ones used in the LCDS web app.
Options 2: Move the LCDS web app out of the picture so it doesn't get loaded, and just use a template for future web apps. If you aren't using it for any of your development, there is really no reason you have to load it.
I'll add a note about this to the documentation that talks about using the LCDS web app as a template.

Imap performance and socket errors

-bash-3.00$ imsimta version
Sun Java(tm) System Messaging Server 6.2-8.04 (built Feb 28 2007)
libimta.so 6.2-8.04 (built 19:28:07, Feb 28 2007)
SunOS vmpm1 5.10 Generic_141414-02 sun4u sparc SUNW,Sun-Fire-V490
We're experiencing imap problems that appear to be load related, and have had to restart mail services several times to restore service. The imap logs show a large number of socket errors. The server load average is in the 1-2 range; there's no apparent memory resource problem. We're seeing 600-1000 simultaneous imap sessions, which is a higher number than in the past. We run JMS & Communications Express on dedicated V490 SPARC server with 8GB of memory. We're planning to add an additional 8GB this Friday.
Our imap configuration settings are as follows:
-bash-3.00$ configutil | grep service.imap
service.imap.enable = 1
service.imap.enablesslport = yes
service.imap.idletimeout = 30
service.imap.maxsessions = 4000
service.imap.maxthreads = 250
service.imap.numprocesses = 1
service.imap.objectclass = top
service.imap.plaintextmincipher = 0
service.imap.port = 143
service.imap.sslcachesize = 0
service.imap.sslport = 993
service.imap.sslusessl = yes
Can you suggest additional troubleshooting steps? Do you recommend any configuration changes?
Thanks.

dpelinka wrote:
Questions:
1. Our JMS version info doesn't state whether it is 32 or 64-bit. Therefore, I assume we are running a 32-bit version. Is that correct?Correct. There is no 64-bit version of MS6.2.
2. Is there a virtual memory limit on the 32-bit version of JMS 6.2? Is the limit greater for JMS 6.3?The Solaris OS imposes the virtual memory size limit of ~3.75GB for all 32bit processes on SPARC. 64-bit processes have a much much larger limit.
http://developers.sun.com/solaris/articles/solaris_memory.html
Regards,
Shane.

Getting "Error Establishing Socket " error while running the application

Hi,
Can Any one help me as I getting the following error while inserting data into database for after some rows and will insert for some rows then again some error . I googled but but didnt get any proper solution.
Soultion what I got it is
1) turn off windows firewall.
2) change server TCP/IP settings.
3) It will give probelm with windows XP SP 2
I tried all but didnt able to solve that.
I am using Java 1.5, MSSQL server 2000,and eclipse 3.2,windows XP SP2
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSConnection.<init>(Unknown Source)
at com.microsoft.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.getNewImplConnection(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at com.aztecsoft.quality.DatabaseConnectionQLTYSRV.getCon(DatabaseConnectionQLTYSRV.java:25)
at com.aztecsoft.quality.DatabaseQuery.getDaytoCountRow(DatabaseQuery.java:147)
at com.aztecsoft.quality.ProjectTrackerUtil.getNetworkDays(ProjectTrackerUtil.java:73)
at com.aztecsoft.quality.ProjectPlan.calODurationinDays(ProjectPlan.java:81)
at com.aztecsoft.quality.ProjectPlan.projectSummary(ProjectPlan.java:25)
at com.aztecsoft.quality.ProjectPlan.main(ProjectPlan.java:126)
Thanks in advance.

Hi this is gopi,Hyd.Is your Problem "Getting "Error Establishing Socket " error while running the application" solved if so can you reply me i am waiting for this answer

Memory Leak in TCL UDP socket

Hi all,
I am currently looking at a memory leak issue in the TCL UDP socket configuration when the fconfigure command is issued under a procedure.
Under a normal scenario where the socket is configured globally, the system handles the memory well and we do not see an increase.
The folowing examples are not the actual code implemented but provide an example of the condition under which the leak is seen.
set msg [udp_open]
fconfigure $msg -blocking false -buffering none -translation binary -remote [list 10.70.0.112 1234]
proc send {} {
   global msg
   puts -nonewline $msg "HELLOHELLOHELLOHELLOHELLOHELLOHELLOHELLOHELLO"
   return
set done 0
while {($done <= 1000)} {
   set done [expr {$done + 1}]
   after 250
    send
If we wish do dynamically modify the parameters of the socket, we get an ever increasing consumption of memory (show memory dead - decrease in processor free). for example:
set clients [list]
lappend clients "10.70.0.111 1234"
lappend clients "10.70.0.112 1234"
set msg [udp_open]
fconfigure $msg -blocking false -buffering none -translation binary
proc send {} {
   global clients
   global msg
   foreach peer $clients {
       fconfigure $msg -remote $peer
       puts -nonewline $msg "HELLOHELLOHELLOHELLOHELLOHELLOHELLOHELLOHELLO"
   return
set done 0
while {($done <= 1000)} {
   set done [expr {$done + 1}]
   after 250
    send
I have tested multiple scenatios using flush, return, closing and opening the socket within the procedure, all to the same result - fconfigure in a procedure creates a memory leak in line with the data rate passing through the socket.
I am seeing this across multiple device types and IOS (819,5915,5940,2901,2921,3945) 15 series M/T/GC IOS. I guess the question is, is there a problem with the construct of the procedure in which I am missing something on the channel side to release the memory or does this appear to be a bug?
any help would be appreciated.
Regards,
Robert.

Hi,
could you please tell me the package version number you are using?
You can obtain it by calling "package re udp".
thx

The system cannot find the file specified.Windows sockets error code:2.

Hi All,
I am on MDM 5.5 SP6.
I am getting the following error message when trying to logging in to the DM.
The system cannot find the file specified.Windows sockets error code:2.This application will now exit.
Runtime Error :
Program C :\Program Files\SAP MDM 5.5\Data Manager\Datamanager.exe
R6025.
-Pure virtual function call.
And in console also the MDM server is stopped after getting the above error message.
Can anybody tell me what could be the problem?
Thanks & Regards
Sireesha.

Hi Sireesha,
According to me, there can be 3 problems,
1. Kindly check whether the MDM server is stopped. If it is, then restart the MDM Server and Load the repository with Update indices.
2. If this error is coming with every repository, the problem will be either in the Version mismatch of the Server and the GUI's you are using. Kindly ensure that the versions for the MDM server and the MDM Gui's Match.
3. If only Data manager Client is giving the problem, then you can un-install and install the DM GUI again.
Along with this, please refer to the link below :
[[The system cannot find the file specified.Windows sockets error code:2.;]
Hope it helps.
Thanks and Regards
Nitin jain

Unrecognized Windows Sockets Error: 0: JVM_Bind

I'm not entirely sure if I compacted this well enough, but after class declaration and method calling, it is essentially what my program does.
Server server = new Server(); // Creates a ServerSocket and binds it to a port.
Client client = new Client(server.getSocketAddress());
public Client(SocketAddress bind)
     try
          socket = new Socket();
          socket.bind(bind); // Problem here
          recieve = new Scanner(socket.getInputStream());
          send = new Formatter(socket.getOutputStream());
     catch (IOException e)
          e.printStackTrace();
}Running the above code produces the following exception.
java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind
     at java.net.PlainSocketImpl.socketBind(Native Method)
     at java.net.PlainSocketImpl.bind(Unknown Source)
     at java.net.Socket.bind(Unknown Source)
     at GameObjects.PlayArea$Client.<init>(PlayArea.java:318)
     at GameObjects.PlayArea.<init>(PlayArea.java:48)
     at MenuStates.GamePlayState.initializePlayArea(GamePlayState.java:90)
     at MenuStates.CreateGameState.mouseClicked(CreateGameState.java:106)
     at Manager.GameManager.mouseClicked(GameManager.java:428)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Window.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)I don't even know what this exception is, and I can't find anything that will really tell me what is going on. Can anyone tell me what is happening here?
I know that this question isn't directly related to Game Development, but I am using it in a game program, and I posted this question in the Network forum, and they flooded my topic with useless messages, and the only person who actually answered my question was extremely vague about it, even after I asked him to clarify. I am hoping that the good people of this forum will be more helpful.

In some cases, the server socket used to need more time to be available. If you run several test, you need time to reuse the same port (for Windows 7). I could try the following code:
Server server = new Server(); // Creates a ServerSocket and binds it to a port.
Thread.sleep(500); // Waiting for server to be available
Client client = new Client(server.getSocketAddress());
public Client(SocketAddress bind)
     try
          socket = new Socket();
          socket.bind(bind); // Problem here
          recieve = new Scanner(socket.getInputStream());
          send = new Formatter(socket.getOutputStream());
          Thread.sleep(500); // Time to execute the sme port in another test.
     catch (IOException e)
          e.printStackTrace();
}

Unrecognized Windows Sockets error: 10106: create

Am getting the following error when I use tcp-mon to sniff the HTTP traffic. Same when I use SOAP-UI.
I'm using windows 7 and using "jdk1.6.0_13". Any help on this pls .
java.net.SocketException: Unrecognized Windows Sockets error: 10106: create
at java.net.Socket.createImpl(Socket.java:388)
at java.net.Socket.<init>(Socket.java:362)
at java.net.Socket.<init>(Socket.java:180)
at org.apache.ws.commons.tcpmon.SocketWaiter.halt(SocketWaiter.java:98)
at org.apache.ws.commons.tcpmon.Listener.stop(Listener.java:543)
at org.apache.ws.commons.tcpmon.SocketWaiter.run(SocketWaiter.java:87)

Winsock error 10106. 8 seconds in Google. Looks like something wrong with your operating system installation.

Unrecognized Windows Sockets error...

Hello everybody!
I am encountering the following problem, when I try to run a program which wants to access the internet. I pasted an extract from the source code here, which I think includes the critical lines:
import java.net.*;
import java.io.*;
class FindLinks {
public static Vector findLinks (String address) throws Exception {
URL u = new URL(address);
InputStream ins = u.openStream();
InputStreamReader isr = new InputStreamReader(ins);
BufferedReader webPage = new BufferedReader(isr);
When I run the complete program, I get the following message:
Exception in thread "main" java.net.SocketException: Unrecognized Windows Sockets error: 10106: create
at java.net.Socket.createImpl(Socket.java:313)
at java.net.Socket.connect(Socket.java:424)
at java.net.Socket.connect(Socket.java:376)
at sun.net.NetworkClient.doConnect(NetworkClient.java:139)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:386)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:602)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:303)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:264)
at sun.net.www.http.HttpClient.New(HttpClient.java:336)
at sun.net.www.http.HttpClient.New(HttpClient.java:317)
at sun.net.www.http.HttpClient.New(HttpClient.java:312)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect HttpURLConnection.java:481)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:472)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:574)
at java.net.URL.openStream(URL.java:960)
at FindLinks.findLinks(FindLinks.java:10)
at FindLinks.main(FindLinks.java:47)
I am using the new Java SDK 1.41 on a Windows XP machine. Does anyone has an idea what might be causing this problem?
Kind regards
Linus

I know, but you triple posted

Socket Error on Recieve

Hi Experts.
when i try to export repository schema (or) Export Change file from the console, it is displaying "Socket Error on Recieve" and i am unable to perform any kind of operation.
I have repaired, refreshed, stoped and started repository and server, but i didn't get any progress on this.
Is any additional settings or operations need to perform at repository or MDM server level...?
Can any one help me what would be the reason for this problem...?
If this is a network issue, then what kind of things need to consider to resolve it..?
Thanks
Bharat

HI Bharat,
This is more to do with MDM server to Data base connectivity.
I think restarting the server can solve your problem,if it does not then check if the same problem exists for other repositories also.Also,check the MDS log file entry.
Thanks,
Ravi

VOIP: SIP UDP SOCKET ERROR

Similar Messages

Maybe you are looking for