Volume Activation Management Tool 3.0 License Issue

I am having an issue with my VAMT 3.0 server running on Windows Server 2008 R2. This morning I performed an 'Update License Status' on all the computers in my Products View. I would say 95% of the systems were licensed and activated. After
the status up date was finished i noticed a good chunk of my systems having a 'Non Genuine' status. These are systems that were 'Licensed and Genuine' before the status update. During this i noticed the MAK key i was using is at zero for activations.
Can someone tell me why all these systems changed their license status???
Is there something i am not understanding about a VAMT server?
If a MAK key has zero activations does it change the status for all related clients with that key?
Why would a system "lose" its activated status?
Thanks,
Ray

those maybe helpful...
http://technet.microsoft.com/en-us/library/hh672143(v=office.14).aspx
http://blogs.technet.com/b/klince/archive/2012/05/02/how-many-activations-do-i-have-left-on-my-mak-keys.aspx
http://social.technet.microsoft.com/Forums/office/en-US/981e0e7a-6446-432d-843b-0dc84c50f739/vamt-20-and-vamt-30-eating-up-activations-when-trying-to-reactivate-using-proxy-activation?forum=officesetupdeployprevious
Best,
Howtodo

Similar Messages

Volume Activation Management Tool invalid characters bug.

I have a Multiple Activation Key from my Technet subscription for Windows 8 Enterprise, and wanted to
find out how many activations I am allowed, and how many I have left. I was advised by a colleague to
download and install the Volume Activation Management Tool 2.0 from Microsoft.
Whilst using this tool, I've found what appears to be a rather serious bug. It does not allow entry of the
product key I wish to manage. If I copy/paste the key under Add Product Keys, it deliberately ignores
one of the characters in the second section of the product key, specifically the letter N.
If I attempt to enter the key manually, it says Invalid character in the product key when I come to this
particular letter. On further investigation, VAMT 2.0 sees several other letters as invalid characters.
It wrongly says all of the following letters are invalid characters - A - E - I - L - N - O - U - S - Z .
This bug makes it impossible to add the product key, and almost impossible to add any other key.

Hello,
Which problem are you referring to?
The first issue was with VAMT not recognizing some the characters in the newer product keys, the solution for that is to use VAMT 3.0 or preferably VAMT 3.1 now.
the second issue is the prompt to create a database and all you need to do is enter a name on the database line and it will create one( leave the Server line alone.)
Thanks, Darrell Gorter [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights.
Tried that ... it doesn't work. I type my machine name into the Database line and after a few seconds I get this . . .
Running SQL Server Express, the server name is listed as DJGMPC/SQLEXPRESS, so I put that in the Server line
and type the machine name DJGMPC in the Database line, and VAMT finally establishes a connection with
this SQL Server that shouldn't really be needed in the first place, when VAMT2 managed OK without it.

Licensing Issue Quality Management 9.0 with UCCX 8.5

Hi guys,
The UCCX compatibility matrix, Cisco WFO System config Guide plus QM 9.0 installation guide all state QM9.0 is compatible with UCCX 8.5(SU3).
We have ordered QM9.0 licenses using part number
L-CCX-90-QM-L-K9=:L-CCX-90-QM-L-K9= : CCX 9.0 Quality Manager Server , 10 Seats LICENSE ONLY
I am unable to add these licenses to our UCCX server as I am getting:
Error: The Cisco Unified CCX Quality Manager Seat feature (2nd line) of xxxxx.lic has unsupported version number (9.0)
Has anyone installed QM9.0 with UCCX 8.5 and if so what licenses did you have to purchase?
Thanks!

I have not done this yet, I was looking into getting the license to do same you are doing. Thanks for the heads up. I will wait to see outcome of your attempt.
My main drive to go to 9.x is to get IE9 32 bit support with the latest 9.x SR as I have a handful of supervisors who have Windows 7 and using it to play back recordings, etc and I'm tired of the compatibility issues and time spent on their PCs to keep it running after they do other updates, etc. Was hoping 9.x with the IE9 and 32 bit support would help with those headaches.

Hello all...is there a way to activate(on startup) /deactivate(on logoff) CS6 Suite using a script, Active Directory Login Script or central Management Tool?

hello all...is there a way to activate(on startup) /deactivate(on logoff) CS6 Suite using a script, Active Directory Login Script or central Management Tool?

The long answer is: No. this is Adobe's secret sauce and you cannot manage it using other tools.
Mylenium

Licensing issues. does sqlserver management studio require license in 2012 or not?

does sql server management studio 2012 require license or not?

does sql server management studio 2012 require license or not?
No SSMS does not require license.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
My TechNet Wiki Articles

INTEL (R) ACTIVE MANAGEMENT (SOL) ISSUE

please HELP
I have a d230MT machine which is supposed to have INTEL (R) ACTIVE MANAGEMENT (AMT) in the BIOS. However I try, I can not bring up the INTEL (R) menu.
Could it be that this program is not in the BIOS?
or, is it me who is not doing something right.
What is the best way forward

Google is your friend if you want to look for answers on your own.
To use AMT:
Hardware requirements for desktop PCs with Intel vPro
Desktop PCs with vPro (called “Intel Core 2 with vPro technology”) require:
* For AMT release 5.0:[30]
o Intel Core2 Duo processor E8600, 8500, and E8400 ; 45 nm Intel Core2 Quad processor Q9650, Q9550, and Q9400.
o Intel Q45 (Eaglelake-Q) Express Chipset with ICH10DO.
* For AMT release 3.0, 3.1, and 3.2:[2][5][6]
o Intel Core2 Duo processor E6550, E6750, and E6850; 45 nm Intel Core2 Duo processor E8500, E8400, E8300 and E8200; 45 nm Intel Core2 Quad processor Q9550, Q9450 and Q9300.
o Intel Q35 (Bearlake-Q) Express Chipset with ICH9DO.
Note that AMT release 2.5 for wired/wireless laptops and AMT release 3.0 for desktop PCs are concurrent releases.
* For AMT release 2.0, 2.1 and 2.2:[5][7][29]
o Intel Core 2 Duo processor E6300, E6400, E6600, and E6700.
o Intel Q965 (Averill) Express Chipset with ICH8DO.

9.3.0.1 Permanent Licensing Issue

I am trying to use an old VMware image that contains Planning 9.3.0.1, but I am having licensing issues.
Steps taken already
1) I went to http://licensecodes.oracle.com/downloads/HS9_MasterLicenseFile.zip and download the new license file.
2) Then went to the license manager (LMtools.exe) and was successful starting and stopping the license server and re-reading the license.
3) Then went to the Configuration Utility and Activated the Product to change the Deployment ID to "Temp-0004" within System 9 BI+, Analytical Services, Financial Management and Planning.
Where I see the errors
1) In my debugging of the issue, I tried starting the Hyperion Planning via command line. Planning starts up fine but no longer accepts the requests.
Error Text: "CLS0000017 No unexpired licenses are available for your product. No further requests to the server will be processed."
2) Also within workspace when I go from Navigate -> Application -> Planning -> PlanApp1 I receive the follow error when I try to login.
Error Text: "A problem with Hyperion System 9 Planning license was encountered. Please see the log for details."
Any suggestions?

I'm attaching the instructions I put together about a year ago -- your mileage may vary:
Instructions to update the 9.3 Demo Drives to new license files.
copy HS9_MasterLicenseFile.lic C:\HYSL\common\LicenseServer\Licenses
move C:\HYSL\common\LicenseServer\Licenses\NA_HYSL_Demo_Disk_beckett_01_18_2007_ga.lic C:\HYSL\common\LicenseServer\NA_HYSL_Demo_Disk_beckett_01_18_2007_ga.lic.bak
Copy HS9_SA_MasterLicenseFile.lic C:\HYSL\common\LicenseStandalone\Licenses
move C:\HYSL\common\LicenseStandalone\Licenses\NA_HYSL_Demo_DiskSA_beckett_01_18_2007_as.lic C:\HYSL\common\LicenseStandalone\NA_HYSL_Demo_DiskSA_beckett_01_18_2007_as.lic.bak
Execute the Hyperion System 9 Foundation / Configuration utility
Active the following Products using the default Deployment ID which is *
Hyperion System 9 BI+
Analytic Services
Hyperion System 9 Financial Management
Hyperion System 9 BI+ Enterprise Metrics
Hyperion System 9 Performance Scorecard
Strategic Finance Server
Planning
Verify the DEPLOYMENTID in C:\HYSL\BIPlus\common\config\license.properties
Ensure the DeploymentID matches below exactly.
     #License keys for BI+
     #Wed Feb 13 21:05:27 EST 2008
     licenseServerPath=@demodrive
     DeploymentID=*
     licenseStandalonePath=C\:\\HYSL\\common\\LicenseStandalone\\Licenses
Reboot
Start Planning
Login
If Login provides license error, perform below steps:
1) Run: C:\Program Files\Microsoft SQL Server\80\Tools\Binn\isqlw.exe
2) Connect as Windows Authenticated User
3) In SQL window:
use pln
update HSPSYS_PROPERTIES set PROPERTY_VALUE='*' where PROPERTY_NAME like 'DE%';
4) Highlight the two lines and press F5 to execute the SQL update.
Regards,
-John

Licensing issue...anyone else?

Run into a licensing issue with CS6
(My provider and I are both trying to work through it but asking if anyone else has had any similar issue.)
Downloaded and installed the Trial Version as soon as it was released.
Ordered and paid for Full version thru my Adobe Provider ( as per previous versions)
Received a Software License Certificate with Win Serial and Mac Serial.
From the Trial splash screen I worked throught the process and entered the Win serial.
Error : Not a Valid Serial. Tried many times same result.
Went to the Menu item 'Complete Profile ID'.
This also failed to register the software to me. Error : Not a Valid Serial.
Went to MY ADOBE and tried to Register a new product with the serial.
Error: This is a volume license and it would not register CS6 to me!
At this point in time...I do not get the TRIAL VERSION splash screen so assume I am not in trial mode. Should the opening usual Splash or Help screen indicate I am registered inside the application and not in Trial Mode?
Issue maybe is: the software is not registered to me and that will have ramifications later ...I am sure.
If I deactivate and reinstall..I am sure that will have ramifications because I am not officially registered to the software at Adobe!
I have been unable to find an understandeable solution via the Adobe Support Files.
Kind of limbo land here!
I am guessing the Adobe Installer Manager is messing with me.

Shooter -
shooternz wrote:
Never had to do it before...ever!
I hope you have much better luck than I did with my Premiere Pro and Photoshop CS6 installs. The issues you're reporting sound somewhat familiar, but not exactly; and for what it's worth: I'm on a Mac. I spent a number of days trying to work through the installation and ultimately fixed it all with a complete reinstall. Of the OS.
Adobe provides a cleaner tool for the Mac that I assume is similar to what's available for Windows. The problem is: it only cleans up the previous version of Premiere (and Photoshop, if need be). What it doesn't do is clean up all the other crud that Adobe's software spreads throughout the OS. And I'm not just refering to Premiere; one of the real troublemakers in the entire installation process was the Adobe Application Manager. No matter how many times I tried cleaning that up and re-installing it, it just wouldn't work right. Which meant that Premiere and PShop had trouble with their licensing (sound familiar?)
For what it's worth, Adobe's tech support folks are, in fact, Indian. But their English is superb and they have very little in the way of an accent. Don't be too worried about understanding them if you do call; they may not be able to help you figure out what's going on (they couldn't, for me), but you won't have a communcation issue.
I'm up and running. The OS re-install did it because I formatted the drive beforehand, removing all of the digital flotsam that Adobe's previous versions of software spewed throughout the filesystem. It was a sucky solution, but it worked.
jas

'Disk Utility has lost connection with Disk Management Tool' w/ RAID 10 set

Using 4 internal drives, I have specified the following setup for each:
2 partitions, 1 'speed' of 5 GB and 1 'data' of whatever remains.
The 4 speed partitions stripe to a single RAID volume correctly.
The 4 data partitions are used to make a RAID 10 volume as follows:
The first 2 data partitions are mirrored to make a 'data-A'
The next 2 data partitions are mirrored to make a 'data-B'
These complete correctly.
Upon attempting to strip data-A and data-B in order to finish the RAID 10 setup, Disk Utility quits with the following message:
"Disk Utility has lost connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility'.
A search here and on the nets reveals only that this message appeared in 10.3.x when attempting to repair disk permissions and had to do with a rogue iTunes support file. This is occurring on a blank system (no iTunes installed) so I don't think its the same cause.
Note that I was able to complete this setup under Tiger several times without issue, so it seems to be unique to Leopard. Does anyone know what is going on and hopefully suggest a workaround?

To answer my own issue and leave a marker here for others, I was able to successfully set up a RAID 10 partition using diskutil, indicating that the problem is Disk Utility itself and not the RAID implementation.
Disk Utility has proven itself to be bugridden (must restart frequently to get updated view of volumes; drops device names at various times; etc.) and this latest bug would seem to suggest that it should be avoided in favor of diskutil for any serious RAID construction.

"Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." Trying to format my iomega external HD for use with Mac

Hi. Trying to connect iomega ext. HD. i have to reformat for Mac. When i plug in & go to Disk Utility,the external shows up and i'm supposed to click "partition". When i do, a box comes up saying ""Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." I quit and relaunched, same results. After googling my question, i came up with this:
"Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."
(Quitting and reopening Disk Utility does not help.)
The following also appears in Console log:
*** malloc[419]: Deallocation of a pointer not malloced: 0x290a410; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug : for architecture i386 object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 27 can't byte swap it)
Workaround
Quit Disk Utility.
From the Finder's Go menu, choose Go to Folder....
Type the following, then click OK: /Library/Receipts
Temporarily remove these iTunes receipts from /Library/Receipts (sort the folder alphabetically as a list):
iTunes.pkg
iTunes4.pkg
You can put them on the desktop, for example. Do not remove iTunesX.pkg or iTunes Phone Driver.pkg.
Open Disk Utility and repair disk permissions again.
Quit Disk Utility.
Put the removed iTunes receipts back in /Library/Receipts.
Note: This issue does not affect Disk Utility's verify or repair disk features.
All seemed good, for a moment, until, upon going back to Disk Utility after removing itunes4.pkg and putting on desktop (i did not have itunes.pkg to remove) the same thing was happening. When i highlite my iomega ext. on left of page, disk perrmissions is grayed and does not allow me to click on it. Same problem from the start. Can somebody please help me out here? That would soooo awesome. Thanx!

i'm just scared i will do something wrong on my own and lose my data.
You shouldn't be scared of that, because you should already have backups. If you don't have backups, then backing up is the first priority.
Insert the Snow Leopard DVD and restart. When you hear the chime, hold down the C key and keep holding it until the Apple logo appears on the display. You should now see the language selection screen. Select your language, then choose Utilities > Disk Utility from the menu bar. In the Disk Utility window, select the external drive (not the internal). The drive may already have a data partition, in which case there will be another icon below the drive icon. Choose the drive icon, then select the Partition tab. Create a single partition with the default options (GUID partition table, Mac OS X Extended Journaled).
When the partitioning is done, select the startup volume on your internal drive in the DU window. Select the Restore tab. Drag the icon of the startup volume to the "Source" field. Then drag the icon of the newly-created volume on the external drive to the "Destination" field. Make sure you have this right. Then click the Restore button, and the data on your startup volume will be copied to the external drive.

Aperture as a general photo managment tool

Hi
has any one used aperture as a general photo management tool, i mean has any body used to manage 40 gb of RAW photos on their hard drive. does any body has any tip on how to manage large volume of photos using aperture.
using the vult would only back the libarary photos and i am not sure how i can export photos to clear some harddisk space at the same time be able to access them using aperture.
is there any web site or books about "how to manage you photo library "
thanks

Jeff - I have a PB and have no issues using the external Lacie FW800 with this. What's really neat is once I have it mapped right in preferences on both the G5 and PB, I can go anywhere and still have the most updated records go with me, eg ratings etc. The problem with running dual systems is when you for example add a keyword on one system - it is written within the local system, not in the Aperture library, so it is not in the menu when used on the other system.
Also, what's totally awesome (although somewhat slower) is when I can't be bothered disconnecting the Lacie from the G5, I simple turn on the G5, grab the PB and go sit in the lounge or wherever. I can then map (through wifi) the Lacie as one of my drives and HEY PRESTO it still works as if it was hooked up (minus the faster speed, as stated above). It maybe slower but less clutter for sure.

Licensing issue by using Applications AC and PC

Hi,
The SAP GRC 10.0 solution comes as bundled solution for AC, PC and RM. While downloading the SAP GRC 10.0 all the three components are downloaded but in a dormant state.
With the release of GRC 10.0, Access Control and Process Control are offered as an integrated solution, both at the data layer and at the user interface layer. This new unified platform enables increased harmonization of key master data.
GRC 10.0 is a harmonized platform. Although maintenance of data within AC and PC is similar in 10.0 as it was in previous releases, there are some key differences. The following master data is shared between AC and PC for the release 10.0 integration scenario.
u2022 Organizations
u2022 Business Processes
u2022 Business Subprocesses
u2022 Controls
SAP GRC System Add-ons:
Access Control, Process Control and Risk Management are contained in one ABAP add-on u201CGRCFND_Au201D
SAP Backend System Plug-ins:
A. GRCPINW: NW Function Modules hold the AC functions for ERP systems without HR (former non-HR RTA)
B. GRCPIERP: PC relevant features are contained in the plug-in GRCPIERP, for example, for running automated controls and the HR relevant functions for AC (former HR RTA)
There are multiple activation points for AC, PC and RM:
u2022 SAP GRC SPRO -> activate the Application. However
u2022 When we go for the Plug-ins (GRCPIERP) installation in backend systems with HR function module it also brings in the PC relevant features.
u2022 Mitigating Control definition based on Organizations
I had activated the Application AC and PC for some time assuming that PC is required to create the Mitigation Control and Organizations. However I just realized that Mitigating Control and Organization can be created even without Activating PC, which does nothing but removes the additional features of PC.
My Query:
u2022 Kindly let me know if I can still use PC to create and assign Mitigating Control as a shared resource for AC and PC or I have violated Licensing issue by using Applications AC and PC when I am supposed to use just Access Control.
u2022 How is shared resources in SAP GRC 10 dealt in terms of Licensing of Applications in SAP GRC 10.
Thanking you in advance.

all the new pc's we've purchased for a time now, don't have a Win7 CoA product key attached, even though they come with Win7 downgrade rights, so your strategy to use the CoA pkeys for the Win7 install on the new machines might be flawed.
We don't buy HP, and I'm in Australia, so I'm not sure if this will be the same for you.
Also, the OEM image that you would use to re-deploy/re-image with, may need to be different for varying models (OEMs might include different drivers, or other checks or blockers, in their image and OOBE scripts), and, the embedded OEM "master" product key/certificate
could vary (or not align) across model types/generations.
Ours do have the SLIC table in firmware and the OA markers, and we use VL Win7 Enterprise anyway, so our 40,000 machine fleet means VL and Software Assurance as a part of our EA + Select is an (expensive) no-brainer really.
The other thought I have for you, is the re-imaging rights that are bestowed when you have a VL agreement (and therefore, are not bestowed if you don't have one). Because we do have a VL agreement, I've never dived into how it might be worked if we didn't
have VL.
http://www.microsoft.com/licensing/about-licensing/briefs/reimaging.aspx
http://www.microsoft.com/licensing/about-licensing/briefs/downgrade-rights.aspx
If you do look at a VL agreement, I'm told they start from as few as 5 machines. And, if you purchase new pc's, you have the option to enrol the new pc's into Software
Assurance within 90days of purchase, which I imagine would save you some cost, compared to attaching SA to them at a later time, presumably requiring you to pay full ticket price for that.
I'd recommend you get some advice from an MS reseller, even if only to work out what the various options/costs might be.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Having deactivation / licensing issues

I NEED SOMEONE TO HELP ME OUT OF THIS HOLE I'M IN!
I recently bought a new Mac and used migration assistant to transfer everything. I am having trouble deactivating Flash Pro on my old Mac so that I can activate it on my new Mac - it keeps saying I have connection issues, even when I use Adobe's several methods to verify that I can connect to their https and activation sites.
Tghe last step in troubleshoot this was to chart with an Adobe agent - see what transpired during my chat session below below - what started out as a request for connect assistance turned into a licensing issue! (I redacted the tech's name, the serial number and other personal info - if there is someone out there at Adobe that can helop me and needs this info, I will share it with them under separate cover)
XXX: Hello! Welcome to Adobe Customer Service.
JD: thanks
XXX: You are welcome.
XXX: May I please have your email address registered with Adobe?
JD: XXX.net
XXX: Thank you.
XXX: I understand that you are not able to deactivate the product.
XXX: I will be glad to check and help you in this regard.
JD: Yes. I am trying to do this on my old Mac so that I may activate it on my new Mac.
XXX: May I have the serial number of the product you are referring to?
JD: XXX
XXX: Thank you.
XXX: I require 2 to 3 minutes while I check on this activation error, is it okay if I put you on hold?
JD: yes
XXX: I see that the serial number you have provided is registered under different account.
XXX: Can you please verify the email address?
JD: I recently changed my email address to XXX but I don't think I changed this on my Adobe account yet.
XXX: Sorry, The product is registered under different account.
XXX: May I know where did you purchase the product?
JD: I purchased it used on Ebay and had the license transferred to me in 2009. I've been using it ever since on my old Mac. When I log into my Adobe acct using XXX this product shows as mine.
XXX: In this case I request you to contact the point of purchase.
JD: I'm not sure why there is an issue - I successfully registered this software 5 years ago on your site and have been using it ever since. I shows up as mine on YOUR site!
XXX: I see that the product is not existing in different account.
XXX: Sorry for typo.
XXX: I see that the product is existing in different account
XXX: Ebay is not the authorized reseller of Adobe. In this I request you to contact the point of purchase.
JD: Then it appears that you need to remove it from the other one so that it is only showing in mine. I own this software - it is in my hands! It is showing as registered under my name in my adobe account.
JD: I bought it from a private individual and used Adobe' transfer of Adobe License form to put it under my name in 2009. I need you to elevate this to your supervisor. Like I said, I've had this software registered under MY ACCOUNT for 5 years!
XXX: I see that the product is not registered in your account.
XXX: Please login to your Adobe account and check it.
XXX: The serial number you have provided is not registered in your account.
JD: I'm in there now - logged in as Jerome DellaPietra via XXX. I own XXX, XXX, Flash Pro 9, XXX, XXX, XXX, and XXX. I'm looking at all of these in the "My Products" page
XXX: Okay.
JD: Both the numbers on my software and what shows in My Products page match exactly!
XXX: Please see if the serial number you provided is existing in under your account.
JD: YES
XXX: I am sorry. I see that the serial number is not registered in different account.
XXX: I double checked and see that the serial number is registered under different account.
JD: Then remove it. I own this software. It is mine. I successfully registered it with Adobe 5 years ago. It is showing as one of my products
XXX: Since you bought the product from the non authorized reseller we will not be able to see it in your account.
XXX: You can remove it from your end.
XXX: Is there anything else I can help you with?
I gave up with him after that. I need someone at Adobe that can fix this for me. I own this software. It is in my hands! It shows up as mine on my "My Products" page! I still have the original transfer of license form showing the original owner! HELP!

Hi, jwilder. Let's try to resove that. To verify, is it happening even if the battery saver is turn off? Did you check if all system apps are updated? To do this, scan the QR codes from here: Nokia Windows Phone 8 App Updates. You may also try deleting the non-functioning Wi-Fi network from the Settings > WiFi > manage(advanced) > Known networks, tap and hold on the network name and select Delete. From the Known network, make sure that the selected one is set to connect automatically.
Keep us posted.

64bit workflow manager tools installation not working

I am configuring a development machine (Server 2008 R2) and have installed workflow manager 1. Everything seems to install just fine but the workflow manager tools only installs in the program files (x86) directory. There is an install in the Program Files
directory but it doesn't have the Visual studio configurator files. I installed from the x86 directory but when running through the Visual Studio Workflow manager tutorial I am missing some things. Most importantly is the "HTTPSend" messaging activity.
In looking at another post it looks like someone fixed that problem by going back and installing workflow manager tools. It looks like it did install on my machine although from the x86 directory. Running the Microsoft.workflow.visualstudio.configurator.exe
file returns this "date -force to overwrite if necessary."
The only other potential issue is that I am using VS 2013.
Anyone else seeing the configurator only showing up in the Program Files (x86) directory? Anyone else using VS 2013?
The Win2008R2 install is 64bit obviously.
Thanks

I am having similar experience with workflow manager and VS2013 - the HttpSend activity does not show up in the toolbox and the "Choose items" dialog sees it be refuses to add it to the designer's toolbox.
Did you ever find a solution for this issue?
Thanks

Intel Active Management Technology Status

Hello
4 months ago I bought Lenovo X61 ThinkPad notebook has Intel Centrino vPro, just few days ago, each time I start the notebook a pop-up note come up into my screen that the status of Intel Active Management Technology (AMT) is disable, and I should contact authorized system administrator; on the same pop-up a note stating "click here"; I done that and it took me to Intel website, when I read the page, it made me to understand that AMT has something to do with my notebook security.
I shall be grateful if could help me to solve this problem/technical issue to enable the AMT.
Thank you
Talaat Agha

Hi Rado
> Can you specify what do you mean by recover the system to install after formatting the disk?
I think the Macdreamy means that you have to use the Toshiba original Recovery CD to reinstall the system on your notebook.
The point is that this error could appear if some necessary and essential system files are damage/removed/changed.
> the first time I install my Toshiba XP no key was required but I am not sure for the second formatting and I only have Vista key on the bottom of the laptop. Do you know how the situation with the XP key in such case is?
As far as I know the Toshiba image (on the Toshiba Recovery CD) is already activated and you dont need any keys for OS activating.
The key at the bottom of the unit belongs to the installed image and it cannot be used with second Windows XP operating system!!!
If you want to use and install the XP on this machine then you would need a original MS Windows XP CD with the right key!
However, back to the Recovery procedure;
Just put the Recovery CD into the CD/DVD drive -> boot from the recovery CD -> follow the instruction and after a short time the new OS with all Toshiba drivers and tools should be installed correctly.
But note; As Macdreamy already said the data backup could be needed because the Recovery CD formats the whole HDD.
Good luck

Volume Activation Management Tool 3.0 License Issue

Similar Messages

Maybe you are looking for