Volume control when using front row with an external audio interface

Hi,
I got my macbook last week, and so far, I love it. But I've got a small gripe with FrontRow - in my room at college, I have my macbook plugged into an oldish Tascam US-122, which I use a lot for recording. The Tascam is connected to my expensive active speakers, and ideally, I'd like to be able to play back via FrontRow to the Tascam, to the speakers, while retaining remote control. This isn't a problem for selecting Photos/Videos/Music etc, but the problem arises when I want to change the volume - the remote simply controls the volume of the macbook's internal speakers, not affecting the output of the Tascam.
I know I could just connect the speakers via the headphone output, but that would mean more cables, and more chopping and changing system preferences to suit whether I'm making music or just listening.
*So - is there any way at all that I can make the macbook's global volume control (using the volume hotkeys and remote) affect the signal its sending (via USB) to the Tascam?* I know its not impossible, because until recently I used it with a PC running XP, and that allowed me to use the volume control app to boost or cut the Tascam's volume. Perhaps its an issue with the Tascam's OSX driver?
The Tascam has its own physical volume knob, so its not like I'm stuck listening at deafening or very quiet volumes, and I know this sounds like an issue with my laziness rather than FrontRow or the macbook, but surely it defeats the point of FrontRow if I have to walk across the room every time I want to turn the tunes up or down?!
Any help would be much appreciated!
Cheers,
Thom Bishop

hmm, yeah, thats kinda what i suspected - i reckon this is to do with the way the frontrow interface is set up, but theres no way (as far as i can see) to make everything pass through the main system stereo channel BEFORE going to an external audio interface... which is COMPLETELY bizarre, since system sounds/alerts get passed to the audio interface fine.
and no, i very much doubt whether ANY external audio interface would respond to apple remote (gap in the market, perhaps?).
this would be a fairly simple problem to solve, if only apple were aware of it... of course, i COULD try getting to grips with audio units and seeing if i couldnt fix it myself, but ive frankly not got the time to learn how that works! how can i make apple aware of this issue?? are they already aware??

Similar Messages

  • Can I use Front Row with my Macbook closed?

    I just got a mini-dvi to video cable for my macbook. I love using front row with it but I was wondering if there was a way that you could use front row with the laptop closed. Oh and I'm using tiger, so its not the new version of front row.

    With your computer attached to a keyboard you should be able to wake it from sleep and run it properly with the lid closed.

  • Narcoleptic MPB when using Front Row

    I have this odd issue when view photos in Front row with a secondary display attached. If I simply view an album, after about 8 or so photos, my machine goes to sleep. Clicking the remote wakes it to resume from the same place and the next photo will play, for about 10 seconds, and then back to sleep.
    My computer is set to sleep only after 30 mins, not after a few mins.
    Super weird bug. Oh, this is running a 2.53 MBP attached to a 23 inch Apple Cinema Display, using the 9400m.
    Anyone else experiencing this?

    I had the same problem but it seemed to stop after I installed a program called Caffeine that prevents your Mac from automatically going to sleep, dimming the screen or starting screen savers. I haven't had a freeze-up as long as I have it enabled.
    http://www.lightheadsw.com/caffeine/

  • Can I use Front Row with macMini (PowerPC)?

    Is Front Row compatible with macMini PowerPC version and Tiger? Or does it need Intel?

    Do you think that I can successfully emulate an Apple TV by setting up my MacMini (PowerPC) with a third party (someone suggested Keyspan) remote, Front Row application, and using Front Row to access iTunes music, TV shows, and videos (same as APple TV),and using Safari to access .mac web gallery (now available on Apple TV2)? The interface on the AppleTV is probably more elegant and seamless, but really, I could access the same content with the macMini, right? Also YouTube videos and Picasa photos can also be accessed via Safari. It will just look and feel more like a computer if I use Safari, vs a Media Centre! Do you think it's worth giving a try?

  • Problems with new MacBook Pro when using Front Row

    I posted this in the MacBook Pro forum, but someone suggested I post it here, so here goes...
    I just picked up a new 15" MacBook Pro 2.4 last night. I was very excited, as I've wanted one for a while now, but when I tried to watch a dvd in Front Row a few strange things happened that I've never seen anyone post about on this board.
    First, when I selected play from the DVD's menu, Front Row quit. I launched it again and everything seemed fine as the dvd was now playing, but then I noticed that the backlit keyboard would light up and turn off every minute or two. This went on for the whole time I was watching the disc... about a couple of hours... the keys would light up then they'd be unlit and then light up again.
    Finally, while I was watching the dvd the screen went blank... there was still audio, but no picture to go along with it. After I touched the trackpad the video came back. This happened a couple of times.
    I don't think it should matter, but I'll also mention that I was using the MacBook Pro on battery while all this happened.
    So, has anyone else experienced these issues? I tried looking through all the posted topics, but couldn't find anything related to my experience with Front Row. I'm debating on whether I should exchange my MacBook Pro as I may just have a lemon.
    If anyone has any advice/tips I'd greatly appreciate it. Thanks!

    I would be curious to know if the same kinds of things happen when you are using the AC power? It's possible that the ambient light was just at the point where the keyboard backlight would turn on and different parts of the movie would make it just light or just dark enough to turn the backlight on or off...
    -Doug

  • Using Front Row with remote control?

    Hi,
    Can anyone please advise if I can activate Front Row using the remote control in OSX Server?
    Before I upgrade from OSX 10.4 to 10.5 Server, the remote control was working fine. I believe OSX Server may have disabled it? Is there anyway to enable it?
    Many Thanks!

    Hmm.. found it under Security setting...
    Thanks !

  • Volume control when using Apple TV for playing video

    Hi,
    I'm using a pair of active speakers with no built in volume control with my Apple TV. When using the ATV for streaming audio (for example Spotify) I can control the volume with the iOS device I'm using as the source, but not while streaming video. Why is that, and, is there anything I can do about it?
    //J

    does the sound on the pad work for face time when you are using in on the pad, with no apple tv involved?
    If so - apple tv uses a ton of resources.  Facetime uses a ton of resources.  facetime over the TV is hit or miss.
    doulble tap the home button, and see what is in the rask bar.  Close off everything else by touching and holding an icon until they jiggle, the close them by touchinmg the minus sign.

  • Ipad volume control when using facebook

    anyone have a problem with sound/volume not working when using FB on the ipad?

    Yes I also have no sound when using face book , only through ear phones but sound works fine with you tube and I tunes
    Tried full factory reset still same.
    All works ok on my lap top ?

  • Front Row with a networked audio system

    Hey everybody!
    Has anyone been streaming content (divx, xvid, mp3) from a NAS via front row, anyone have any experiences of this?
    Does front row support Networked audio systems? (NAS)

    Welcome to the Apple Discussions!
    Right now, Apple only supports Front Row on Macs that have a built-in infrared receiver and shipped with an Apple remote. However, when Mac OS X 10.5 (Leopard) is released, it will include Front Row for all Macs that are compatible with Leopard (like your Mac Pro). You can use the keyboard to run Front Row (Apple-esc opens it, for example), so you'll have an option if you upgrade when it's released.
    If you want to use similar software now, you can install .
    -Doug

  • How do I connect a camera to my macbook pro when using the computer with an external monitor in clamshell mode?

    How do I connect a camera to the Macbook Pro when using the computer in clamshell mode with an exrternal monitor?

    same as it ever was
    do it like nothing is different.
    be sure to have an external trackpad keyboard or mouse as you will loose them on the computer once it is closed.

  • Strange network performance when using Time Machine with APE External HD

    All -
    I am still looking into a performance issue with TM and and an external HD on the APE.
    Strangely the network activity changes from a more or less steady 200-400kb/sec to a pulsed 1-2Mb, and than a few seconds later back to 200-300kb.
    I posted a few screenshots from the Activity Monitor here: http://gallery.mac.com/erwinhogeweg#100039
    The RSSI is -32, and I have a 130Mb connection with the base station, but I am not even using 1% of this BW. The overall CPU load is about 40%, so it is completely mystery (to me) why this transfer rate is slow.
    Is there anyone who can give some insight in this?
    There is 107GB of data on my local HD. With about 2GB/hour, it will take 2 days to back this up to a n APE Time Machine drive...
    Kind Regards,
    Erwin

    Do NOT use a USB hub with an APE...
    I had two LaCie HDs, so I figure I connect them both with a USB hub. This was not a good idea. As soon as I removed the hub the network BW was at a steady 1-2Mb/s, with an occasional peak to 5Mb/s. Still way lower than the theoretical maximum, but hey, I guess you can't have it all.
    Thanks,
    Erwin

  • Front row with a mac pro . . .

    hi im just trying to figure out how i cn use front row with my macpro? has anyone figured out a way , or know how to do it? i would prefer if i didnt have to buy a remote but i will if i have to. thanks heaps
    luke

    Welcome to the Apple Discussions!
    Right now, Apple only supports Front Row on Macs that have a built-in infrared receiver and shipped with an Apple remote. However, when Mac OS X 10.5 (Leopard) is released, it will include Front Row for all Macs that are compatible with Leopard (like your Mac Pro). You can use the keyboard to run Front Row (Apple-esc opens it, for example), so you'll have an option if you upgrade when it's released.
    If you want to use similar software now, you can install .
    -Doug

  • Sharing iTunes and then using Front Row

    I have been downloading all the album artwork just like everyone else is, now that iTunes 7 is out.
    I have run across a small problem and a fix I would like to pass along for people having problems viewing the album artwork on a computer that is sharing the iTunes from another computer and then using Front Row.
    First off, the artwork for me seems to work fine on all individual computers that have the songs and the album artwork on it.
    When I shared my 'master or main' computer iTunes with my Mini Mac Intel, I then played the music using Front Row but the majority of the album covers would not show up.
    For some reason only a few of the album covers were showing up in Front Row on the shared computer. It took me quite awhile to figure out that the only album covers that were showing up were the album covers that I dragged and copied onto the main computers iTunes album window.
    I don't know if anyone has found anything easier to fix this problem but I went ahead a copied all of the album artwork, one by one, on the main computer into the iTunes artwork window. Now, all the computers that access the main computer via sharing, shows the album artwork when using Front Row.
    I hope I explained this clear enough.
    Here is a photo of my Mac Mini hooked up to my TV, playing Front Row and using the shared iTunes Library from my main computer which is an iMac G5.
    http://users.sisqtel.net/jkriz/MacMini/frontrow_albumcovers.jpg
    I needed to use the flash for this photo because it was getting dark but I think you get the idea.
    I know I could have put all my music on the Mini Mac or any of my other computers and I wouldn't have had to go through all of this... but then I would have trouble keeping all of my computers music up to date. This way, I only have to keep the main computer up to date with all of my music. Much easier.
    If anyone has any other suggestions, please let me know.
    I hope the rest of you can benefit from this tip.
    iMac 17 (Intel), iMac G5 (Rev B), Mac Mini (Intel)   Mac OS X (10.4.5)  

    Bizmarck,
    Well, this is interesting.
    When I first read your question I said to myself, of course I can play the shared slideshow along with the selected shared music.....
    Well, I'm glad I tried it out first before I posted this as I cannot play the selected songs on the shared slideshow. All I could play was the Minuet in "G"....
    I could have sworn I used to be able to do this with 10.4.7 and Front Row 1.2
    However, I could be wrong.
    I have tried everything.
    I have the Serving computers iTunes and iPhoto open and to allow sharing of both.
    On the Mac Mini which is playing the shared items from the serving computer, I can turn off the music but I cannot select a song from the shared library in iPhoto. All the library shows for music selection on the Mac Mini is the music that is on the Mac Mini.
    Apparently Apple has more work to do if this is going to work.
    It is interesting to me that we cannot play a shared slideshow along with the shared music that was selected with that slideshow.
    If the selected song from the shared slideshow is already on the Mac Mini, then I can choose it, but I cannot choose any other songs unless they are on the Mac Mini.....
    It seems that Front Row will not play the selected shared song from the shared slideshow. Front Row only wants to play the songs that are on the Mac Mini for any of the shared slideshows... BUMMER.......
    If you open iPhoto (not Front Row) on the Mac Mini, then select a shared slideshow, then click on the 'Play' button. You will see that Minuet in "G" is selected to play on that shared slideshow. I turned all of mine OFF for the time being as I am tired of the sample music also.
    If I come up with anything new I will post it here.
    Thanks for sharing this information.

  • Front row (with itunes 10) does not show moves from shared library

    I have two computers. My office computer contains all of my iTunes content, running iTunes 10. I have a mac mini connected to my television, and my intent is to use Front Row to access the shared library from the office computer. The problem is, when using front Row only a small number of my TV shows and none of my movies appear. I have checked the sharing settings on the source computer.

    Exact same problem here.
    It has been working fine doing this for years, then around a month ago after no changes to either machine that I know of, about half the content vanished when viewing a shared library.
    I seem to have also worsened the issue by trashing and rebuilding the iTunes library from scratch. Since at least before doing this I had some of my Movies and TV shows show, but not all, now I seem to have a tiny amount of movies and none of the TV shows listed.
    Checking on the source computer in front row shows all of them present as expected. Completely baffled by this. None of them are showing under odd sections (Say in Music rather than TV Shows) either so I know the meta-data isn't at fault.

  • Use front row to control airtunes volume

    is there any way to use front row (and remote) to control volume on external airtunes speakers instead of system volume? i understand how to select them, just want to know how to do volumes. thanks.

    You're talking about using the volume slider within iTunes? Or using the remote to actually control the speakers?
    If the former, than try the App called iRedLite. It lets you remap the remote's inputs to different functions.
    If you're familiar with AppleScript you can make the up and down buttons control the volume slider.
    Open Script Editor, then open the iTunes Dictionary. Find the "volume up" and "volume down" and use those in iRedLite.
    This should work, hope I helped.

Maybe you are looking for

  • It's possible to disable custom color from color picker?

    Hi guys! I've searched in the threads about color picker but I found anything about it... It's possible to disable the option to select a custom color? I work in a enterprise who makes softwares to brazilian clients, and not everybody understands eng

  • Creating an open document/hyperlink

    Hello...I am trying to create an Open Document hyperlink on my report.  I am currently using Crystal Reports XI.  My main report is getting sent out in PDF and is a summary version of our inventory items.  I want the user to be able to click on the I

  • Asa 5520 "loosing" code after code has been put in and operating

    Sorry to ask this if it has all ready been covered.  We have an asa 5520 running 8.3.2(1) code.  Three times now I have entered code and rules in our asa and had things working, only to have the code "dissapear" and thus things stop working.  We upgr

  • SAP BW 3.52 and POS DM: Architecture Best Practise

    We are retail/wholesale company that are two different business units. Currently we are running SAP BW 3.0 that is integrated with SAP R/3 and APO for reporting purposes. We are now in the early stages of implementing SAP Retail along with SAP POS DM

  • How can I get Aperture 3.4 to support Sony NEX-5N RAW format photos?

    I've upgraded all software and my camera -- Sony NEX-5N -- is on the Aperture list for RAW format support, but it continues to show images shot in RAW as a black square with FORMAT NOT SUPPORTED! in the middle. Is there a setting I'm overlooking or w