Volume Level of my Laptop R062tu (64bit) is too less

Hi,
I have bought HP laptom r062TU on 21 March 2015.
Volume Level of my Laptop R062tu (64bit) is too less.
Please help me solve this issue.

Hi @prajakta21 ,
Welcome to the HP Forums!
It is a dynamite place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More.
I grasp that you purchased your notebook less then 1 month ago and the audio is very low.
Have you done all your Windows updates?
Have you ran the HP Support Assistant to aid with any HP updates?
Here is a link to HP Notebook PCs - No Sound from Speakers (Windows 8) that will have some steps to try although you do still have sound.
If the issue remains I suggest contacting HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

Volume level on line-in at 100% but still low sound level when I rec

For many years and hundreds of times I have successfully recorded wave files using a wave editor (Goldwave). I have transferred albums, tapes, and now satellite radio by running stereo cables from my receiver into my line-in on my sound card (using a stereo-to-mono adapter). The volume level on the line-in was always too loud on my old sound card, so I always turned the volume of the line-in down to about 20% and it worked just fine.
Two weeks ago my old sound card fried (don't know the brand - got it from a friend, and I've already thrown it out). I replaced it with a Sound Blaster Li've! 24-Bit. However, using the same configuration (receiver into line-in on card), when I record now the volume level that it records at is way too low. Even when I set the line-in level at 00% the volume that it records at is not even half the level it was with my old sound card set at 20%. Basically, when I record now at 00% on the line-in, the volume level it records at is too low. I have no problem with the line-out level - when I play mp3's or anything else on my hard dri've the volume is crisp, clear, and plenty loud at 40%.
But what is the deal with the low volume recording level? Is there another setting I need to change? Or do I not have the right sound card to do this with? Please let me know if it is a setting issue, or if I just need a different sound card to do this. Thanks.

I've had an Audigy2-nx for a week and have struggled with low
recording levels as well.
Have you tried selecting "what you hear" instead of "Line-In"?
This gives me about 20% higher input levels.
I gave up on MedeaSource for variable bitrate recordings and
moved to dbPowerAmp. (direct recording to lame-mp3)
Others here mention good VBR recordings with MedeaSource, but
it won't exceed 90kbs (average) on my system.
I'm finally getting decent recordings from line-in.

[solved]Command line script to equalise volume levels of all mp3 files

Hello guys,
I have a bunch of mp3 files within a folder. Unfortunately they have unequal volume levels. Some of them are far too low, others too loud.
Is there a simple command line script to equalise all of them?
Regards
Robert
Last edited by orschiro (2012-12-30 17:44:59)

I remember I found such a script a long time ago. I suppose it still works, here it is http://codepad.org/MLu1iscD. Please tell me if it works for you. By the way, it depends on mp3gain and python2-eyed3.
ps: As far as I can see, this script doesn't change the mp3 files itself, but stores the new volume in the id3 tag. This means, that you won't corrupt your files in any way, but the player needs to be able to get the volume information and adjust it. The script measures both the album and the track gain. Which one is used can be configured in the player.
Last edited by Army (2012-12-30 16:39:27)

Fluctuating volume levels during a track

'Ello. Has anyone else ever experienced the volume levels changing during a song? The only way I can describe it is it feels like someone's playing with the volume, lowering it for half a second before returning it to it's previous level. It only does it on a handful of tracks, but I was wondering if anyone else has had this? Could it be an earphone/headphone problem? Any help would be much appreciated. Rich

I have Windows 8.1 and this only happens with Spotify, not Songza, Amazon Cloud Player, or Pandora. It started happening just in the last week and I have no membory of downloading any new software. I've played with disabling/enabling on Spotify:- View > Hardware Acceleration- Properties> Music Quality> High Quality Streaming- Advanced Settigns> Crossfade tracks- Advanced Settigns> Set the same volume level for all tracks On my PC's Sound settings I checked "Do nothing" in Communications and I tried different options with Beats, which was included with my laptop. Sound does NOT fluctuate using the app on my phone, so I can only assume it's either my PC or the PC application. I believe I've tried everything listed in this topic, but posting again in a last ditch effort before I have to end my subscription :(

SB Recon3Di September, 2014 Driver install significantly reduce volume level

Hey,
Microsoft Updates installed the latest SB driver for my 64bit Alienware MX18 and my volume level is now < 50% of what it was before the install. I checked to make sure all volume/mixer levels are at 100%. Does anybody have an idea on what may be causing this? Should I roll back the driver for the SB?
Thanks

Most likely not. The Recon3D is a dedicated sound card that is removable from your system if you have such a card. The 3di most likely a software interface on top of a Realtek onboard sound card. The hardware based Recon3D software suite and driver will not work with a software based interface on top of a Realtek chipset.

Please Help! Sound is stopping in every 5 seconds until volume level is changed.

I have G60-535DX model and recently I came across a strange problem. Sound of my laptop speaker works fine for 5 seconds and then stops. When I change the volum level either from task bar volume icon or through keyboard shortcut it starts playing again for next 5 seconds. Please note that it has no issue with headphones.
I have used windows troubleshooting wizard, checked in device manager, drivers are up-to-date. Could you please post the solution for it?

Please reply with solution as its very annoying issue

Limited Volume Level on Nano

I have my iTunes library stored on an external drive due to my library size and my limited internal disk space on my Windows XP laptop. Fast forward to now where for months I puzzled over the volume level on my Nano. I can gradually increase the volume on the Nano to 50% level. But when I go above 50%, the volume remains unchanged to the max. After repeat visits to the Apple Genius Bar (including one where they replaced my Nano with a refurbished 4G) I kept having the same results. Finally I got someone at Apple (his name is Mickey) who was able to help uncover that the volume limitation is due to my library living on the external drive. We tested it by copying a CD to the internal drive, syncing it to the Nano, and the volume increased to a deafening level (I do like it loud.) Any ideas about how to fix this? Mickey suggested copying part of my library (for syncing purposes only) to my internal drive and that should resolve the volume issue, but then I'm always dragging and dropping. BTW, the volume level is fine with iTunes itself.
Thanks!
-David

The test was to rip the CD with the external drive disconnected. iTunes set up a new library on the internal drive and the volume increased from 0 to 100%. I then repeated the same steps with the external drive and the volume increased from 0 to 50% and would not increase any further as I turned the click wheel. I even dragged and dropped the newly ripped file from my internal drive to the external drive and the same thing happened as if I ripped it directly to the external drive.
As for the info tab and the level, do you mean info -> options tab? After ripping, the default volume adjustment is set to the default of 50%. I then increase it to the max. Strange thing is when I plug my headphones into the laptop and listen to the songs directly within iTunes, all is well....

How can a consistent volume level be set for all the songs in an iTunes library?

The volume of the songs in my iTunes library varies significantly when played on my iPod. Is there any way of setting a consistent/equal volume for the songs in my library so that I don't have to change the volume level when listening to my iPod?

I have used the $30 iVolume utility to equalize my iTunes song's volume for several years and it works well. I just wish it worked for music videos. iVolume is available on the Mac App Store, or you can try before you buy at the developer's site: http://www.mani.de/en/ivolume/index.html

Using compressor DVD Studio Pro 4 will only accept ac3 format in the burn process. ac3 makes a nnsense of the good sound delivered, 30% reduction in volume, auto volume levelling giving unwanted volume variations. Used to be able to burn using AIFF/WAVE,

AS Above. Edited in FCPX. Excellent sound file. Using Compressor 4 to DVD Studio 4. Wanting AIFF or WAVE sound for acurate sound.
Previously DVD Studio 4 has accepted AIFF etc and delivered sound as reuired. Now, during the burn process everything other than ac3 is declined as 'video bit rate too high', but will burn if the AIFF format is replaced with ac3 (which I presume meanss the 'video bit rate too high' is referring to the sound file)
The issue with ac3 format is the huge reduction in original volume and worse, the 'auto volume levelling' that makes a nonsense of the original soundtrack - with simply aweful unwanted variations in volume Throughout the the dvd.
I have tried everything I can think of to get around this. The 'volume gain' in compressor doesn't make any difference. Exporting just AIFF and the Video to DVD 4 doesn't make any difference, it always declines anything but the aweful sound ac3 delivers.
I have customers awaiting a musci DVD, not with thei quality I can't.
Cheers
Phil

The total video bit rate is determined by audio & video. Depending on what rate your video file was encoded at will determine how much room is left for audio. PCM(aiff/wav) audio requires a bigger piece of the pie. Video bit rate too high means your overall(video+audio) rate is going above 9Mbps which the format won't allow. The only way to use aiff would be to lower your video file's data rate. The length of your program is also a factor in all of this.
I had some problems in the past with using aiff instead ac3. Although there shouldn't be any issue I experienced playback issues on some players that couldn't be explained but were cleared up by ac3. I have been using the same specs as Dave's suggestion for almost nine years and have not had any issues with mix, quality, or levels.

Can I have multiple volume levels in one track?

I have a track composed of audio from a cassette recorder of a now deceased relative's voice.
Since the cassette was turned on and off during recording, the recordings are at different volumes.
I have been able to import the cassette into a GarageBand project, and delete dead space, but now I find that the volume is not consistent.
Any way to remedy that? I am wondering if I need to chop it up and make more than one track, and adjust the volume on each track? Will this work as long as the tracks don't overlap?
And then do I send the finished product to iTunes in order to be able to use it in an iMovie?
Or can I drag it right from GarageBand to iMovie?
Many thanks, I'm a very new GarageBand user.

JGolomb wrote:
Can I have multiple volume levels in one track?.
search GB's help for "curve"
And then do I send the finished product to iTunes in order to be able to use it in an iMovie?
"Share" it to disc
can I drag it right from GarageBand to iMovie?
no

Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.

Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.

Hi saiyed adil,
Thank you for contributing to the Apple Support Communities.
It appears that your iPhone 5s sometimes produces low sound, but a restart corrects it.
It can take some time to isolate and resolve intermittent issues like this one, and I'd recommend going through the steps in this guide the next time it occurs:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
All the best,
Jeremy

Is there any "mechanical" helper to get my volume levels the same?

I create playlists from ratings,(and comments),- and albums have different volume levels. As I always use my ipod to go to sleep, it is very destructive, to not be able to hear my music one minute, and then have it much too loud the next.
Is there ANYTHING, free or chargeable, physical or software, that can help me get my itunes library to all the same volume level. My problem is agrivated by the fact that I do have some shared downloads, and also someone put my vynils onto cd for me, but at a lower volume.
I might add, that I'm still a learner on the computer. I have been told to change the soundcheck -playback -preferences -itunes. I have tried it, ticked and unticked - it doesn't make any difference.
I'd be very gratefull for some advice. Please HELP, this has been going on for ages. Thank you, in anticipation.

I'm SO very grateful for your help! Have downloaded it, and have started to use it, but havn't listened to results yet.(just about to) THANKYOU SO MUCH.
Thankyou so much again, this could be the end of a long (negative) era!
A bit later: have listened to a little, seems a huge amount better. will update when used properley.
I'm anticipating some being way out. Though it says it can overcome old changed volume levels, is it best in your opinion, to put them back to original setting?
Many Best Wishes Vonnie

1020 There is no lock for ringer volume level, but...

Earlier today I posted in this Community regarding the Subject issue. Received good reply and marked it as a Solution. Had additional thoughts so I'm doing this new Post. Same Subject as before. I had asked if it's possible to LOCK the ring volume, at 10 for example, it's loudest, so I can hear it ring no matter what. I've been unpleasently surprised several times when my ringer rings BUT the volume is much much lower, way too low (2 or 3 maybe), way lower from where I had set it, up at (10). So then, I immediately adjust the volume back to 10, where I want it to stay, always. The volume up and down rocker button works fine. Problem is, the unexpexted, surprising and unwanted way very low ringer volume that causes me to MISS SOME CALLS. I have four kids. As a parent, missing calls can be a SERIOUS matter. If I could LOCK my ringer volume at 10 then I'll be happier. For me, thr parent, this tricky too low ringer volume problem is more than an annoying tech glich. What causes this problem, you may ask? The volume goes down without wanting it to do that because that while the phone is unlocked and in any kind of use or even while it is in screen lock mode, the very handling of the phone will sometimes unintendedly, unknowingly, without noticing it, press the down volume part of the volume rocker buttom. After all, the down volume part of the rocker button is the located at the lower end of that rocker and is closer to the center of the phone and close to the power button. That's right where anybody normally holds and works the phone, right there. AND worse yet, it takes only a little bit of pressure to accidently push the down volume rocker button. No wonder the down volume button unwillingly gets pressed alot. Also, unwanted down volume change, by pressing of the volume button, can happen in many ways such as in a pocket, carrying it in your hand, passing the phone around, lots of ways. This unwanted down volume change can and does happen on the 1020 while calling, texting, using apps and even during the screen lock mode, and that is with or without the pass code feature enabled. Only time this can't happen is when the phone is completely off and dark. I've searched the posts and don't find anyone else saying this. That doesn't mean it's not a real problem, like for us parents and others. But I know that what I say is correct, to my knowledge, because today an MS WP Community Moderator and also a Lumina Community contributor agreed with what I'm experiencing. This problem has always happened with my 1020 and my previous 920 always did exactly the same type of low volume TRICK. No updates are causing this problem along the way. It's just now that I got fed up enough to confirm within the Communities that there is NO WAY TO LOCK THE RINGER VOLUME on the 1020. I'm ranting about it to you fellow Lumina users. If you experience this, if it bugs you, if you agree that it's more than a mere tech glich nuisance, that it's causing missed calls for family and business, then please post in on this Lumina Community and demand a fix for it. I'm not a phone software expert but I'll bet that a minor software tweek followed by an update, is easily possible. This fix SHOULD be good for existing Lumina models, not just for future ones. I'm gonna work this. It can happen more surely and quickly if those Lumina users who share my concern will post about it. This post is not a critique nor does it infer defects in software or phones. I just want to peel a layer off this onion.
WJC

SonOfTheSouth wrote:
Also, unwanted down volume change, by pressing of the volume button, can happen in many ways such as in a pocket, carrying it in your hand, passing the phone around, lots of ways.
As far as the phone is locked, the volume key will not function .. so this should not affect the volume level.
SonOfTheSouth wrote:
I'm ranting about it to you fellow Lumina users. If you experience this, if it bugs you, if you agree that it's more than a mere tech glich nuisance, that it's causing missed calls for family and business, then please post in on this Lumina Community and demand a fix for it.
This being a User-to-User forum, what you suggest may not have the indended effect. But, you may add your vote HERE to the most appropriate 'feature request' ..

When I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting?

I'm trying to mix a recording in the latest 2014 version of Garageband, but when I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting? Does anyone know why it changes even after saving the file?
Below is my iMac settings.

Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store

I locked my volume level, and forgot the code to unlock it, so how can i get my volume back to normal without a code??

About four years ago I set the volume lock on my ipod to half way up. To do that, you enter a four number code. I decided to change the code one day, and then ever since then i can not remember the code. I would like to remove my volume lock from half way, so that i can turn it up to max volume, but to do this it is asking for the old four number code, which i don't remember! So how can i take this volume lock off without knowing the code??? I tried to reset all settings, but that did not remove the volume lock. Please help me figure out how to achieve full volume level!
Thanks.

See here: Restoring iPod to factory settings
B-rock

Volume Level of my Laptop R062tu (64bit) is too less

Similar Messages

Maybe you are looking for