VS 2010 is crashing after installing SAP Crystal report 13.0.
HI Experts.
I have seen many thread related to crashing in VS2010. I feel i am also getting the same error msg.
"Msg:Object reference set to an instance of an object - (Mouse move event)."
I didn't see any proper fix on this issue and I think i can give proper steps to reproduce that, Thats the reason i am posting this as new thread.
Here is my report structure and senario,
I have a sub repot which will display all the parameters and its values which i am setting through my C# application.
i am using crystal report viewer to show my reports. once i click on the subreport i used to get seperate preview tab for my parameters list.. if i click on refresh from this view, on the time of refreshing the application will crash on mouse click in reports. especially on click of that waiting cusor(Which is not there in cr2008). Report will work fine if its load immediatly. problem happening only the reports are taking few time to get load.
In brief, When the report is loading, if we click any where in report,application crashes.
Note:I was using VS2010 and CR2008-Sp3 before. all of my 150 reports are working fine on that time. Last week i have updated CR2008 with SAP Crystal report 13.0. This issue stared after that.
Thanks in advance,
Salah.
Hi Don,
Thanks for your reply.
I worked on this to get proper scenario for reproducing this issue. one thing i observed that,
crash is happening regularly the places which i have registered mouse double click event in crystal report viewer. My guess is,While loading the report(On click of refresh), the viewer is empty(bank). That time if we do double click on the viewer its crashing. But confustion is getting error on mouse move event
Hope this will help you guys to reproduce the crash.
We people are really waiting to fix this issue asap. we are also woking in our application to catch the exception somehow. Will update you if i get any progress .
Here is my exception text,
Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at CrystalDecisions.Windows.Forms.PageControl.OnMouseMove(MouseEventArgs e)
at System.Windows.Forms.Control.WmMouseMove(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.UserControl.WndProc(Message& m)
at CrystalDecisions.Windows.Forms.PageControl.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Thanks,
Salah.
Edited by: salahudheen muhammed on Feb 21, 2011 1:07 PM
Similar Messages
-
Unable to install SAP Crystal Report before using VS 2010
i have published a file using VS2010 but can't install Crystal report without installing VS 2010
Hello,
For issues regarding SAP Crystal Report, I suggest you posting it to:
http://scn.sap.com/community/crystal-reports
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Cannot Install SAP Crystal Reports 2011 on 64-bit Win 7
I am trying to install the 30-Day Trial of SAP Crystal reports 2011 on a Windows 7 64-bit pc and at the end of the installation, I receive the two errors below.
I made sure I clicked 'Ran as Administrator' and under properties under the Compatibility Tab, I selected Windows 7.
I also made sure my antivirus software was disabled.
1st Error - It was a pop up after the installation said successful.
Missing installdir reg key for installiverse, required for uninstall. Key: SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Installer\aurora Value: Path
2nd Error - It was another pop up right after I selected OK on the 1st error pop up.
Runtime Error!
Program: C:\Users\Ken Muhr\Desktop\River Valley Recycling\Crystal Reports -...
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
And the box name is called, "Microsoft Visual C++ Runtime Library
After I click OK to clear this 2nd error pop up box, I go to my programs and it is not there to use. I don't understand why. Has anyone experienced this?
Thanks in advance!Hello,
Have a look in the install log file, it is under this tree:
C:\Program Files (x86)\SAP BusinessObjects
Anything in the install log? You can open it with notepad.
Also have a look at this post: SAP Crystal Reports 2011: Error INS00140 and other install errors
And you also need 2.0 Framework as well as MS VS 2005 C++ Security installed.
Interesting name for a PC...
Thanks
Don
Edited by: Don Williams on Aug 19, 2011 12:57 PM -
Installing SAP Crystal Reports v 2011 in Citrix environment
Can SAP Crystal Reports v2011 run in a Citrix environment? Anyone have any issues installing? Running?
See this [Platforms |http://www.sdn.sap.com/irj/boc/support?rid=/webcontent/uuid/e01d4e05-6ea5-2c10-1bb6-a8904ca76411]link. Find the Supported Platforms for CR 2011. I believe we have supported Terminal Server and Citrix since CR XI R2.
I have seen issues with the latest C and TS versions though and the Citrix/MS forums should be searched for known issues.
Thank you
Don -
I updated my operating system on MBP (mid 2010) to Mountain Lion 10.8.3. I am starting to regret it! It takes forever to boot up and shut down, it keeps crashing every time my husband tries to go on his work email system (he's about to chuck my MBP out the window!) and also does it to me randomly. The MBP runs very SLOW.
What's up? Do I need to bring to Genius Bar or can it be resolved here?
Thanks!Hi - I have the smae problem. Suddenly crashes - MBP 15, new HD with Mountain Lion.
here is the report:
Mon Aug 12 17:20:27 2013
panic(cpu 1 caller 0xffffff7f9b7fcf1a): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff8095c82000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.5/src/AppleM uxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 1), Frame : Return Address
0xffffff809520b1f0 : 0xffffff801961d626
0xffffff809520b260 : 0xffffff7f9b7fcf1a
0xffffff809520b330 : 0xffffff7f99dd2f1e
0xffffff809520b3f0 : 0xffffff7f99ea712d
0xffffff809520b430 : 0xffffff7f99ea718e
0xffffff809520b4a0 : 0xffffff7f9a16ded0
0xffffff809520b5d0 : 0xffffff7f99ecfa75
0xffffff809520b5f0 : 0xffffff7f99dd9d50
0xffffff809520b6a0 : 0xffffff7f99dd77d0
0xffffff809520b8a0 : 0xffffff7f99dd910a
0xffffff809520b970 : 0xffffff7f9ad478be
0xffffff809520ba30 : 0xffffff7f9ad4e6f4
0xffffff809520ba60 : 0xffffff7f9ad57f7e
0xffffff809520ba90 : 0xffffff7f9ad57cb1
0xffffff809520bb50 : 0xffffff7f9ad258c8
0xffffff809520bba0 : 0xffffff8019a66e69
0xffffff809520bbc0 : 0xffffff8019a68410
0xffffff809520bc20 : 0xffffff8019a65e2f
0xffffff809520bd70 : 0xffffff8019698c01
0xffffff809520be80 : 0xffffff8019620b3d
0xffffff809520beb0 : 0xffffff8019610448
0xffffff809520bf00 : 0xffffff801961961b
0xffffff809520bf70 : 0xffffff80196a6536
0xffffff809520bfb0 : 0xffffff80196ce9e3
Kernel Extensions in backtrace:
com.apple.driver.AppleMuxControl(3.4.5)[49FEF732-D7A3-327B-A7AA-6AC5A6E3DCFF]@0 xffffff7f9b7ef000->0xffffff7f9b801fff
dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[1D0BB11E-7D71-34CF-ACC3-57DF01CADA 08]@0xffffff7f9b7ea000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f99c0a000
dependency: com.apple.driver.AppleGraphicsControl(3.4.5)[4A2C8548-7EF1-38A9-8817-E8CB34B8DC A6]@0xffffff7f9b7d6000
dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7f99be8000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f99d5d000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f99d1a000
com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f99d 71000->0xffffff7f9a016fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f99c0a000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f99d5d000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f99d1a000
com.apple.nvidia.nv50hal(8.1.2)[988EAF3A-3318-3787-8A5A-844830FA1522]@0xffffff7 f9a022000->0xffffff7f9a2f6fff
dependency: com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f99d 71000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f99c0a000
com.apple.GeForce(8.1.2)[7EC545A4-4B57-32F1-8DC3-C31023AFBDCB]@0xffffff7f9ad130 00->0xffffff7f9ade0fff
dependency: com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f99d 71000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f99d5d000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f99c0a000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f99d1a000
BSD process name corresponding to current thread: talagent
Mac OS version:
12E55
Kernel version:
Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
Kernel slide: 0x0000000019400000
Kernel text base: 0xffffff8019600000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 106796605211
last loaded kext at 24169327860: com.apple.driver.AppleBluetoothMultitouch 75.19 (addr 0xffffff7f9b828000, size 77824)
loaded kexts:
com.paceap.kext.pacesupport.snowleopard 5.9.1
com.serato.usb.kext 2.3.0
com.apple.driver.AppleBluetoothMultitouch 75.19
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.1.4f2
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.12.87
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.7fc4
com.apple.driver.AppleHDA 2.3.7fc4
com.apple.GeForce 8.1.2
com.apple.driver.AppleIntelHDGraphics 8.1.2
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.nvidia.NVDAStartup 8.1.2
com.apple.driver.AppleMikeyDriver 2.3.7fc4
com.apple.iokit.IOBluetoothUSBDFU 4.1.4f2
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.4f2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleBacklight 170.2.5
com.apple.driver.AppleIntelHDGraphicsFB 8.1.2
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.driver.AppleMuxControl 3.4.5
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.3d1
com.apple.driver.AppleUSBTCButtons 237.1
com.apple.driver.AppleUSBTCKeyEventDriver 237.1
com.apple.driver.AppleUSBTCKeyboard 237.1
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleUSBCardReader 3.1.7
com.apple.driver.AppleIRController 320.15
com.apple.iokit.SCSITaskUserClient 3.5.5
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AirPort.Brcm4331 615.20.17
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.5.2
com.apple.driver.AppleUSBHub 5.5.5
com.apple.iokit.AppleBCM5701Ethernet 3.6.1b4
com.apple.driver.AppleUSBUHCI 5.2.5
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.IOBluetoothHIDDriver 4.1.4f2
com.apple.driver.AppleMultitouchDriver 235.29
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.3.7fc4
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.nvidia.nv50hal 8.1.2
com.apple.NVDAResman 8.1.2
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.4f2
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.4f2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.3.7fc4
com.apple.iokit.IOHDAFamily 2.3.7fc4
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.driver.AppleGraphicsControl 3.4.5
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.3.0d51
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleUSBMultitouch 237.3
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5
com.apple.iokit.IOUSBMassStorageClass 3.5.1
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.5.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.5
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.iokit.IO80211Family 530.4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IOUSBUserClient 5.5.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.6.0
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0 -
How to run a crystal report in SAP Crystal Reports 2011
I've installed SAP Crystal Reports 2011. I can't figure out how to run a crystal. What replaces the lightning bolt used in previous versions of crystal? I'm I missing something?
Hi Tim,
You may:
1) Press F5
2) Go to Report > Refresh Report (Notice the icon beside the label)
3) Go to View > Print Preview
4) Or, click the refresh button on the toolbar
5) The icon on Point#2 is also available on the toolbar
-Abhilash -
SAP Crystal Reports 2011 - Product keycode
Dear all,
I have been requested to install SAP Crystal Reports 2011 to use it as a reporting tool for our SAP ERP 6.0.
However, I got stuck when the installation program asks me for the "Product Keycode". Does anybody know if there is a temporary product keycode so we can evaluate this product before purchasing it?If so, where is it?
Once SAP Crystal Reports 2011 is successfully installed, do we need to install anything else in order to set up the connection between SAP Crystal Reports 2011 and SAP ERP 6.0?
Thanks in advance,
MarcSince someone on your site obtained CR 2011, they should also have a permanent keycode...
Failing that, the only way to get a 30 day temp eval keycode is from here;
http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
But you will still have to go back to who ever obtained your current CR 2011 and ask them for a permanent keycode.
Re. Connection to SAP ERP 6.0. You're better off asking in the SAP Crystal Reports Database Connectivity|SAP Crystal Reports - Data Connectivity; forum rather than in this forum.
- Ludek -
SAP Crystal Reports for Visual Studio 2010-Deployment Issue
Hi All,
I am trying to deploy CR for VS 2010 and without success. it is the first time I am deploying an application that is using CR so Im probably doing something wrong.
I installed the SAP Crystal Reports runtime engine for .NET Framework 4 (32-bit) and I get the error message : "Could not load file or assembly 'System.Web.Extensions, Version=4.0.0.0, Culture=neutral, Pub.."
what is the right way to deploy a CR application? I use a windows forms application as a project.
HagitNote that the error is:
System.Web.Extensions, Version=4.0.0.0, Culture=neutral
This is a MS framework dll / assembly, not a Crystal Reports file. Have you installed framework 4 on that box? If not, do so, then reinstall the CRVS2010 runtime.
- Ludek -
App won't install with the prerequisite SAP Crystal Reports Runtime Engine
On installing with the following prerequisite checked:
SAP Crystal Reports Runtime Engine for .NET Framework 4.0
.. received this error:
Crystal Reports for .NET Framework 4.0\CRRuntime_32bit_13_0.msi
has changed since it was initially published.
Should I NOT use the prerequisite, and instead, use a merge module?I ran a program with the exact same name, 2 weeks ago, on my VS 2010 Dev machine:
CRforVS_13_0.exe. (284 Meg)
Today, I followed your link, and downloaded the file with the same name, but different size: (1.5 Meg). I mean, a really major difference in size!
Because creating and testing installation packages is very time consuming, I want to verify what you have stated so that I completely understand before I change what currently works, which is for the client machine to separately install the CR runtime, to what you're proposing in including a prerequisite to my install package.
-> I should run this latest exe. It will add a prerequisite to the prerequisite list in Visual Studio 2010. The installation of this prerequisite will work, as the earlier one did not. And it will work for both 32- and 64-bit client machines.
Therefore, I can eliminate the need for the client machine to install the CR run time separately.
Please confirm, and then I will make the necessary changes, and do the install tests on client machines.
(Also, FYI the merge module did not work for me on a 32-bit client machine. So I removed it.)
Thanks, Peg -
My iPhoto keeps crashing after installing the latest update, can't do anything!
My iPhoto keeps crashing after installing the latest update, can't do anything! It used to crash when importing but now I'm at the point where I open the software and after 2 seconds it crashes (nothing connected either). What to do? Can't access any photos
Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If you can create a new library and import some test photos then the problem lies with your original library.
If that's the case make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If iPhoto crashes while trying to create a new library then try this:
Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
If that fails to help a reinstall of iPhoto is indicated. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
Then install iPhoto from the disk it came on originally and apply all relavant updaters.
P.S. If you're still running Tiger, 10.4.6, then the above may not apply. If you're running a newer system you should update your profile so we have a better idea of where you're at.
OT -
Error after Install SAP NetWeaver 7.01 ABAP Trial Version
Hi Everyone,
I am new on SAP and I am getting this error after install SAP Netweaver 7.01 ABAP Trial version in my notebook.
It is Windows Vista Basic, 3GB of RAM, 2.1 Core Duo 2.
Installed successfully, but when I go to "Start" in sevidor it returns the following error, and not start:
Error! Connection failed to node (local) for database NSP:
-24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
-24832,ERR_SHMNOTAVAILABLE: Shared memory not available
-24827,ERR_SHMALLOCFAILED: ID C:\sapdb\data\wrk\NSP.dbm.shi, requested size 2560
Someone could help me?Hello Marques Polastri ,
->Please check/stop all database applications and tools, like DBMGUI and dbmcli ... Then check/kill all processes left with name dbmsrv.exe, if you will still have them. After that rename C:\sapdb\data\wrk\NSP.dbm.shi and C:\sapdb\data\wrk\NSP.dbm.shm, shared memory files, to C:\sapdb\data\wrk\NSP.dbm.shi.old and C:\sapdb\data\wrk\NSP.dbm.shm.old.
Try to connect to the database NSP & let us know the results.
-> Please update with output of the following commands:
dbmcli db_enum
dbmcli -d NSP -u <control>,<pwd> db_state
Thank you and best regards, Natalia Khlopina -
"Load report failed" after upgrading to Crystal Report for VS 2010
I switched to Visual Studio 2010 few months ago. Today, I needed to update my Crystal Report reports, so I installed the Crystal Report for Visual Studio 2010 on my local server. I updated my reports and it works fine on my local server.
On my remote server, I installed the Crystal Report runtime engine for Framework 4.0 (note that my project use the framework 3.5) and published my project. But now I got the following error when I want to create a report "Load report failed". I double-checked the path of my report and its permissions (note that it was working before the update).
Am I missing a step ?
Thanks for your help.
Edited by: David1111_ on Mar 1, 2011 6:08 PM
Edited by: David1111_ on Mar 1, 2011 6:09 PMGoogling 'FILE LOCKED WITH ONLY READERS' I came up with the following:
http://forum.sysinternals.com/topic21378.html
So, no, that does not appear to be the issue.
However my assertion - given that the correct dlls are loading - is still that either the report is not there (do you see it loaded in Process Monitor?) or the process has no access to either the actual rpt or the temp files that the print engine creates. Those really are the only reasons for report load errors.
This being a web app, try a simple win app - as a test. All you need is the viewer and CrystalreportViewer1.ReportSource = <path to report> (use a saved data report). Compile, throw the exe on the server. Run. What happens there?
- Ludek -
My macbook pro crashed after installing maverick. I lost all my photos however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?
We'll need to know more to beable to help. Do you want to try to restore your photos from your iPhone to your Mac, or try to recover the photos from the old iPhoto Library on your Mac?
What is the situation of your Mac now? In hat way did it crash? A hardware problem with the drive? Does the system not start properly? Does iPhoto not launch? Do you still have the iPhoto Library on your mac or a backup, so we could try to rescue the photos there?
What versions of iPhoto are on your iPhone and your Mac?
however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?
On the iPhone you cannot access the "package contents" - IOS hides the file system from the users. To restore photos from your phone share all iPhoto photos to your Camera Roll, that are not already in the Camera Roll, and then connect the iPhone via USB and import the Camera Roll to iPhoto or Image Capture. Or use any of the other sharing methods described on thos manual page: see: Ways to share photos http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnk7d8f763e
To retrieve photos from a corruptrd iPhoto Library on your Mac we need to know the version number and more about the "crash" you experienced, the state of your mac, the system, the data. Please post back with more details.
-- Léonie -
Entourage crash after installing update 10.6.4
Entourage 2008 keeps crashing after installing 10.6.4. The problem seems to be the database. I have tried rebuilding the database, I have copied it, I have moved it: nothing works. Please advise!
It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
1) Use the AirPort menu bar item to turn AirPort off, then on again.
2) Try to select your Wi-Fi network from the AirPort menu.
3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
4) In the same panel as (3), define a new location and see if you can make that work.
5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
These steps may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder. -
Windows 7 home taskbar crashes after installing adobe reader
windows 7 home version, taskbar crashes after installing adobe reader
The link to the Reader forum is at the top of this forum.
Maybe you are looking for
-
Cannot programmatically select a task in Team planner - Office MS Project 2010
Hi, I'm using Visual Studio 2010 32 bits, MS Project 32 bits on a windows 7 64 bits environment. I created a MS project 2010 addin in Visual Studio. I can do many things with this addin, add ribbon, create tasks, change colors in gant view... However
-
How to Export data from a Table to Excel using PL/SQL Code
Hi, I need to export data from a table to the excel sheet using PL/SQL script. could you pls provide with custom codes or sample procedures. Bobby
-
How do i unlock the ipod controls on itunes?
How do i unlock the ipod so can delete songs that r on my ipos without auto update???
-
Dear All, Can anyone explain me if I can link my sales price with GR value.?The requirement is the client wants to link the sales margin with GR value of the material. So I want to calculate price = cost + 10% margin. Can i use condition exclusion fo
-
FTP: how to get total number of files in directory
Hello Folks, I prefer to use FTP from the command line but cannot figure out how--after having connected to a remote directory via ftp--to list the total number of files in that directory. In Unix, I would do this: % ls | wc -l But hopefully there is