VS 2013 and "smart devices projects" win CE y Win Movile 6.5

Hello
I got 2 apps for Windows CE and Windows Movile 6.5 in VS2005 and VS2008 I need to move it up to Visual Studio 2013. I've try but without sucsess.
Is it
possible to
develop
for
Windows
Mobile
and
Windows
CE
from
visualStudio
2013? Do you have any clue ? link ? video?
thanks in advance
Salu2 Sergio T

Hi SergioT，
You could refer to this thread I met before, I think you could get useful information:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/a82f5a19-240a-487d-942e-130de48e07b2/visual-studio-2013-support-for-windows-cewindows-phone?forum=visualstudiogeneral
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Can I use the NI DAQmxbase C functions to develop a Smart Device application using a NI USB or NI ENET 9234 C module with Visual Studio for an iMX31 (ARM 11) embedded computer running Win CE 5.0 or 6.0?

I have an embedded application running on a iMX31 (ARM 11) that does fairly high performance analog input (24 bit, 50K samples/second). I use Microsoft Visual Studio 2005 C/C++ for the develoment environment and have currently built versions of the application for Win CE 5.0 and 6.0 without Labview or NI hardware. I have used the NI 9234 with great success on several Labview applications in the past and I'd like to use the 9234 on this embedded application with VS2005 C/C++. The NI documentation hints that I should be able to do this (maybe I'm overly optimistic) and I'm wondering if anyone else has? I've tried the Evaluation versions of Labview Mobile and Labview Touch panel to build a C application using the NI DAQmx base C function inside Visual Studio without success. I can compile and link the ContAcq IntClk LV example project for an x86 platform using NIDAQmx but not for a ARM platform using NIDAQmxbase.lib. I get the same linker error error LNK2019: unresolved external symbol referred to in Knowledge Base Document ID 4HAEE7QQ even though I've set up (or think I've set up ) VS2005 as the KB article indicates.
If anyone has used the C functions and NIDAQmxbase library inside a VS2005 Smart Device project, I'd greatly appreciate your comments.
Thanks

Hello Gene,
I have been checking into this for you and have found out that what you are trying to do cannot be done. At least not in the current manner you are hoping for. The internal architecture of DAQmx Base requires the cross-compiling capability of the LabVIEW Mobile Module. While a stand-alone compiler can compile DAQmx Base calls for desktop processors, it cannot compile DAQmx Base calls for ARM.
If your application requirements exclude the LabVIEW toolchain, then the remaining option is the USB Driver Development Kit which is avaliable here, but you will have to contact your local field sales representative to discuss support
options as standard phone and e-mail support are not available for the
NI Measurement Hardware DDK.
NI Measurement Hardware Driver Development Kit
http://digital.ni.com/express.nsf/bycode/exyv4w?opendocument&lang=en&node=seminar_US
ColeR
Field Engineer

How to create smart device application and dialog control using Visual C++ (Visual Studio 2005)

Hai all,
Good day. I am new to Visual C++. I tried and done some simple programs and dialog based programs in MFC application using Visual C++. But when i am trying to do
VC++ smart device win32 smart device project application project, not getting how to add event handler function for button. I tried serial communication in smart device application. i have inserted dialog and in that
no event handler. Can you please guide me to make a project for embedded board in VC++ smart device application.
Thanks & Regards Sasi ................. Go Green

Hi kvg,
Thanks for posting in MSDN forum.
From your post, it seem that this issue is better ask to the
Visual Studio Smart Device Development - Native C++ Project forum. I will move your thread to that forum for a better support. Thanks for your understanding.
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SAP B1 on Windows Handheld Smart device

Dear Experts,
The following is my requirement...
I have Windows based smart devices (Barcode scanner integrated), they run on Windows CE, I want to write an application which can be installed on these devices and Users can post transactions (Inventory Transfer, GR, GI).
I have started a windows Smart Devic+e project in VS 2005, And I have added the SAP B1 DI API 8.8 as a reference. Now when I am trying to connect in the Emulator, I am getting the error. "Class is not Registered".
This is my first smart device project. Please advice on how to proceed further.
Thanks In advance,
Vasu Natari.

Hi Vasu
Download B1WSSourceCode_1.1 - it has the source for B1WS and includes samples.
The services default to localhost and in the sample, you have to change the app.config file to point them to your web server (if indeed it is not your localhost).
In a smart device application, which has not app.config, set the URL property.
    Public Sub New()
        _Service = New StockTransferService
        _Service.Url = "http://192.168.0.250/B1WS/Service.asmx"
        Dim msgHeader As MsgHeader = New MsgHeader()
        msgHeader.SessionID = GlbData.SessionID
        msgHeader.ServiceName = MsgHeaderServiceName.StockTransferService
        msgHeader.ServiceNameSpecified = True
        _Service.MsgHeaderValue = msgHeader
    End Sub
That is the typical example of a service you will find in the samples - note the _service.url setting.
Hope this helps.
Regards

ActionScript 3 frameworks for smart device apps

Hi there,
I have had a look at two frameworks (FeathersUI and MadComponents) that are designed for mobile and smart device application development. However, I don't have much experience in choosing the one that is more optimised for smart devices and don't know about what the pros and cons of each are.
I would greatly appreciate someone who's used them and knows a lot about the frameworks regardless of the one they're in favor of. I would like to know the differences in terms of performance, speed, limitations, what you can and can not do with each, how close each one is to native UI of iOS and Android. Last but not least, what do you rate each on a scale of 10?
Thank you.

Two things to look at are:
The mobile capabilities of ADF Faces.
http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/jsf/index.html
Which has components that will render automatically on mobile devices and HTML browsers adjusting themselfs.
Also you might be interested in the JWE extension to JDeveloper for Wireless development.
http://otn.oracle.com/tech/wireless/tools/index.html

Hello, failing miserably here, cant import nef files from aperture 3.1.2 to iphone 4. I am syncing with the projects and smart albums and I am only able to sync the jogs and psd's Anyone out there to aid this frustrated photographer??

hello, failing miserably here, cant import nef files from aperture 3.1.2 to iphone 4. I am syncing with the projects and smart albums and I am only able to sync the jogs and psd's Anyone out there to aid this frustrated photographer??

See my reply to a later simplified version of your question. I don't think that either iPhone or iPad recognize RAW files such as NEFs. And the iPhone is not designed to be a mass storage device like a portable flash or portabel hard drive for temporary storage of files, if that's what you're after. As I mentioned in my previous reply, I have an iPad and have been experimenting with it as a tool for photography, hoping that it would be a nice travel tool for backing up and viewing photos from my Nikon dslr. But both the iPad and iPhone just are not set up to do that well. Both show photos nicely, but organization of photos is very frustrating since you can't create albums on the iPhone or iPad, but only back on your sync computer. (There is one very powerful photo organization app called SortShots, but you import photos to it and it organizes and stores the images wtihin the app not using the native photo app. It doesn't work with NEFs either.) I don't know of any RAW processing software for either device.

App-V 5.0: Adding Visio 2013 and Project 2013 to a previously deployed virtual Office 2013

Good morning.
I can successfully deploy Office 2013 via PowerShell and App-V v5.0 without difficulty. I've read the document at
http://support.microsoft.com/kb/2915745/en-us and followed all instructions successfully.
My question is this: If Office 2013 without Visio 2013 or Project 2013 is virtually deployed, how can those components be added later?
For instance, we may have 100 users that acquire a virtualized Office 2013 without Project or Visio. We then may have 25 users that require a virtualized Office and Visio without Project and, perhaps, another 15 that require Office and Project without
Visio.
Currently, when I attempt a second virtual deployment of one of these components, it removes Office 2013 making it inaccessible.
How can Project and/or Visio be deployed to an already existing virtually deployed Office 2013?
Thanks very much.
John
IAmStrings

As a part of MDOP, you'll also have access to UE-V which will provide a mechanism of moving user preferences across the same applications from difference packages.
It will require planning, configuration and deployment, but will ensure you don't face the same issue in the future.
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

The printing of .pdf file from Project 2013 stops when the file name should be written. Project 2013 crashes. Does someone know what is wrong between Project 2013 and Adobe Acrobat 9?

The printing of .pdf file from Project 2013 stops when the file name should be written. Project 2013 crashes. Does someone know what is wrong between Project 2013 and Adobe Acrobat 9?

The Acrobat 9.x product family passed into "End of Support" mid-year of 2013.
Acrobat 9 support of MS Project via PDFMaker stops with Office 2007.
For Office 2013 support you must use Acrobat XI (11.0.1) or newer.
A good to have reference:
https://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Acrobat Pro and Standard DC are what are currently available for purchase.
Be well...

How to make sure, on success action 'Open another project' works on both ipad and desktop devices

If I have a project with a open another project in a new window action set to a button in that project, will only placing the swf and htm files of the newly opened project within the published folder of the parent project be enough for allowing the parent project to be played successfully both in desktop and mobile devices like ipad? To allow this, I presume multiscreen.html file located within the published folder of the parent project is the file to be used. But, since swf files can't be played on mobile devices, do I need to place the multiscreen.html file located within the published folder of the newly opened project into the published folder location of the parent project? The parent project folder location already has multiscreen.html file specific to that project and if the multiscreen.html file of the newly opened project need to be added to the published folder location of the parent project(which also has multiscreen.html file), how do I go about doing this? Can I just rename the mulscreen.html file of the newly opened project to say something different like multiscreen1.html and add this file along with the swf and htm file into the published folder location of the parent project, so that it works for both desktop or mobile devices.

From what I'm hearing, you're probably wise to have a copy of the file in both locations. One in the same folder as the SWF, and the other in with the HTML5 files. What I don't know is exactly where in the HTML5 folders your file would need to be. It might need to be at the same level as the index.html. I haven't tested this.
You should be able to figure out the answer to a lot of your questions just by testing things out on content uploaded to a web server. At the end of the day, if it works, it works.

Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay Kumar

Hi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

How should we be going about creating and saving and/ or exporting our ODC files using Excel 2013 for use in Project Server 2013 Online?

Hi I need your guidance on how I should go about setting up my Excel 2013 reports so that others in our Project Online 2013 environment can access and updates these reports of mine.
My questions are as follows:
I presume I need to create and save my ODC files in a PWA > Data Connections folder. I have English and French users in our environment. Do I need save them twice? Once in the French and again in the English Data Connections folder?
Likewise for the Excel file?
How should I go about creating my ODC files within Excel? By default, the ODC files are being created on my PC's > My Documents > My Data Sources folder. I presume I need to get them saved or exported to the PWA > Data Connections
folder. So, How should I be going about creating and saving and/ or exporting the ODC files???
FYI...My oData Feeds that I wish to use and join in this particular Excel file are as follows:
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/AssignmentTimephasedData01T00:00:00'
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/Projects()?$select=ProjectId,ProjectName,CAS_Classification,CAS_PCO,CAS_IT_Department,CAS_Program,CAS_SubProgram
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/TimeSet()?select=TimeByDay,TimeDayOfTheWeek$filter=TimeByDay ge datetime'2014-10-19T00:00:00'
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/Resources()?$select=ResourceId,ResourceName,Programs,Supplier,Source,Role,CostType
Thanks in advance,
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

Thank you Guilaume. May I ask you to help clarify a bit more for me? If I have to do it for both languages (the reports and ODC files), do I simply copy the same ODC files from e.g., the English to French folder in PWA (Odc files)? Or does
that defeat the purpose? Or, do I need to create a new set of oData Feed Connection files with a French version of Excel 2013 and save them to the French Data Connections folder in PWA? Do I need to have a French version of Excel 2013 to create
French ODC files and ultimately French based reports and/ or vice versa?
I did notice that the following oData metadata command from within a browser produces different results (ie., English versus French metadata returned) depending on who runs it (i.e., French or English user, etc). As you can see I am a bit confused.
Any help you can provide would be greatly appreciated.
https://XXXXX.sharepoint.com/sites/pwa/_api/projectdata/$metadata
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

Contacts Sync - I have my contacts on iphone5 and MacBook Pro 2012. I just purchased a MacBook Air 2013 and want the same contacts on that device. What is the best way to do this? Non-techie. Thanks

I have my contacts on iphone5 and MacBook Pro 2012. I just purchased a MacBook Air 2013 and want the same contacts on that device. What is the best way to do this? Non-techie. Thanks

Follow the instructions for enabling your iCloud account on the MBAir here > Apple - iCloud - Learn how to set up iCloud on all your devices.

Automating Sharepoint Foundation 2013 Installation and Deployment of Project

Hi all,
I'm a long time software developer with absolutely no experience in Sharepoint.
I have just joined a new company and I was asked by the team leader to create an installer for Sharepoint Foundation 2013 and a working Sharepoint solution made by the company, preferably using HTA.
I have experimented installing it manually and deploying the solution, however, what's the best method to automate these two steps?
I was thinking of something like AutoSPInstaller, and after the end of the installation, I would run Add-SPSolution and Install-SPSolution commands for deploying the solution.
What do you think?

So the only problem with SharePoint Foundation is that you cannot script the provisioning of the Search Service, you must use the wizard via Central Admin UI to create it. There is an unsupported workaround, but again, unsupported so I don't use it.
I'd stay away from HTA and go just pure PowerShell prompts, myself though.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Sync of bold 9930 w software 7.1bundle to outlook home&business 2013 and gmail account

problem with sync of gmail google and blackberry Bold 9930 with 7.1 bundle software.
Device has best file current setup not syncing device, computer and account.

Hi,
I found a similar thread and a solution:
Back up all your code / projects etc.
Close outlook.
Search for VbaProject.OTM (or whatever file is used to store your projects, there may be more than one)
It should be [Drive]:\Users\[Username]\AppData\Roaming\Microsoft\Outlook
Move this file to another location.
Open outlook.
Go into VBA and recreate your projects from your backups.
You should now be able to bring up the digital signature option without it crashing.
This seems to apply to both Outlook 2010 64 bit and Outlook 2013 64 bit.
The thread link is below:
http://answers.microsoft.com/en-us/office/forum/office_2010-customize/outlook-2010-64-bit-crashes-digital-signature/4f3eb01d-eeb1-4f80-a8ee-e8266a705c7b
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Adobe Air and Flash Future on Desktop and Mobile Devices

Hello,
iam interested to develop for mobil and desktop devices with AS3 and Flash Professional and i have any question.
I see also many benefits to develop in flash as in java because javas gui development is based on swing a old java graphics engine.
Next reason is the plattform like Linux,Windows,IOS.,the Game Development and other stuff.
With Flash i can create nextgen interactive stunning cool gui interfaces for apps.
I dont know why flash sucks for the market and devices.
My question: is as3 and flash save for the future ?
Make it really sense to learn as3 and Flash ?
I have read many blogs,threads on adobe and other forums year 2012 Adobe stop flash development,
and now 2013 google androids kitkat now have removed api features that kills complete flash !!!
Other comments says Flash is dead for the market!? Many frustradet flash developers he work 10 years and more with flash are crying.
So what is really the Future for the A3 and Flash Development ?
Thanks and greetings

Hi mc_gfx,
> You think i can get started with flash and air development without worries?
Software development always involves risk, so you can't really do much without worries.       AIR in particular is a cutting (bleading?) edge technology. Adobe is attempting to solve a difficult problem with limited resources, and the results aren't always ideal.
If you want to deploy to Android and iOS, and you write two native apps, you face a 100% risk that you'll have to write your app twice. While this may not take twice as long as writing it once, it will come close.
If you use AIR, you only have to write your app once, but you face other risks.
Here's the problem. In AIR, Adobe is attempting to create a framework that translates ActionScript into bytecode for two different platforms. This isn't easy. Every time Apple or Google upgrades their operating system Adobe has to try to refine AIR so that it translates everything correctly for the new OS. AIR also has to maintain backward compatability with all previous OSs (is that the plural of OS?). AIR also has to work with many different models of Android and iOS devices. This includes supporting most, though not all, of the many different capabilities that these OSs support. Adobe, wisely, doesn't try to support every new feature immediately. Instead, it picks and chooses which new features it will support, and how soon. But even taking this approach I have the impression that their task is daunting.
If you research this forum you'll find numerous examples of people complaining about features that don't quite work correctly. For example, I've put ~6 developer months into developing a language learning app, only to find that AIR's MP3 playback support has some limitations which severely impact the playback of voice recordings, which severely degrades the value of my app. I'm hoping that Adobe will fix this bug, but it's been two months now, with no movement. Another serious bug, involving audio recording using the device microphone, took three months to get fixed. During that period I had no idea whether it would get fixed, or whether I'd have to disable an important feature of my app on iOS.
So, you want "without worries"?
Some people are lobbying Adobe to include support for Windows Phone in the AIR framework. IMHO, this is madness. Adobe clearly has limited resources. Let them first focus on making basic features like MP3 playback work properly on the platforms that they already support.
The same issues probably apply to all the other cross-platform development frameworks - Sencha, Xamarin, etc. They face the same difficult technical challenges. I can't speak to the question of how well they're addressing them, but I'd want research them carefully before I invested a lot of time into developing with them.
With regards to AIR, here's my advice: Before you start a non-trivial project using AIR, make a list of all the things that your app will do, then see if you can find existing apps created with AIR that do these things. Make sure that the feature works on both Android and iOS. You won't be able to test on every device that you'd like to support, but pick a few and test on them.
You don't need to worry about your app's logic - ActionScript is great for that - and AIR translates it just fine. But think carefully about your app's 'skin' - all the ways that you want it to interact with the outside world - input and output - and confirm that apps exist that demonstrate that AIR can handle these features. Also think about the app's infrastructure - network interactions - database interactions - etc.
You'll probably end up with a list of features that you haven't been able to confirm. You can vet these by creating a proof of concept that confirms that AIR will support these needs. Do this before you start developing the full app. Once that's done, pray that everything that works now will continue to work with future OSs and devices. Adobe has a pretty good record on this sort of things, but there aren't any guarantees.
Don't worry, be happy        ?
HTH,
Douglas

VS 2013 and "smart devices projects" win CE y Win Movile 6.5

Similar Messages

Maybe you are looking for