VTP (revision numbers) and one client not getting updates

Hello.
Somewhere along the line one of our switches (3750x) got messed up. Once they were finally configured about 6 months ago we never touched them again.
I noticed yesterday when I created a new vlan it was not getting populated to one of our switches. For some reason I did not notice that the domain name on the switch not receiving updates was not our domain.
So I switched the domain on this switch to the correct domain and it still does not show any updates and also has a revision # of 7.
So on this switch I then unplugged all trunk ports and did "vtp mode transparent". I then switched it back to "vtp mode client vlan".
It still showed revision 7.
So I tried "vtp domain bogus" and "vtp mode transparent" and then did "vtp domain mydomain" and "vtp mode client vlan".
It still showed revision 7.
So I tried "vtp domain bogus" and "vtp mode transparent vlan" and then did "vtp domain mydomain" and "vtp mode client vlan".
It still showed revision 7.
I am at a loss as to how to fix this problem other than rebuilding the switch. I have a vtp server at revision 10 and two other switches also at revision 10 that are getting updates from the vtp server. Only one switch is not. Please note that this one switch that is not working at some point did since it has all the vlans we created on our initial installation.
-- Thanks
// GOOD switch
GOODSWITCH#show vtp status
VTP Version capable             : 1 to 3
VTP version running             : 3
VTP Domain Name                 : mydomain
VTP Pruning Mode                : Disabled
VTP Traps Generation            : Disabled
Device ID                       : 7426.acad.de00
Feature VLAN:
VTP Operating Mode                : Client
Number of existing VLANs          : 15
Number of existing extended VLANs : 6
Maximum VLANs supported locally   : 1005
Configuration Revision            : 10
Primary ID                        : b838.61aa.5880
Primary Description               : lab-desk
MD5 digest                        : 0xB8 0x3E 0x2C 0xB7 0x85 0xB5 0x5D 0xA6
                                    0x4A 0x4E 0xFC 0x5E 0x5A 0xA1 0xAF 0xCC
Feature MST:
VTP Operating Mode                : Transparent
Feature UNKNOWN:
VTP Operating Mode                : Transparent
// BAD switch
BADSWITCH#show vtp status
VTP Version capable             : 1 to 3
VTP version running             : 3
VTP Domain Name                 : mydomain
VTP Pruning Mode                : Disabled
VTP Traps Generation            : Disabled
Device ID                       : 7426.acad.ee80
Feature VLAN:
VTP Operating Mode                : Client
Number of existing VLANs          : 12
Number of existing extended VLANs : 6
Maximum VLANs supported locally   : 1005
Configuration Revision            : 7
Primary ID                        : b000.b4b0.f200
Primary Description               : lab-desk
MD5 digest                        : 0x7A 0x5C 0x2E 0x05 0xF2 0x80 0x6F 0x2F
                                    0x4E 0xE1 0x34 0x07 0x01 0x7F 0xB9 0x2B
Feature MST:
VTP Operating Mode                : Transparent
Feature UNKNOWN:
VTP Operating Mode                : Transparent

Output from the switch NOT getting updates.
// we have three trunk lines
TenGigabitEthernet1/1/1
TenGigabitEthernet1/1/2
TenGigabitEthernet2/1/1
// #show interfaces trunk
Port        Mode             Encapsulation Status        Native vlan
Te1/1/1     on               802.1q         trunking      1
Te1/1/2     on               802.1q         trunking      1
Gi2/0/31    auto             n-802.1q       trunking      1
Gi2/0/46    auto             n-802.1q       trunking      1
Te2/1/1     on               802.1q         trunking      1
Port        Vlans allowed on trunk
Te1/1/1     1-4094
Te1/1/2     1-4094
Gi2/0/31    1-4094
Gi2/0/46    1-4094
Te2/1/1     1-4094
Port        Vlans allowed and active in management domain
Te1/1/1     1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Te1/1/2     1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Gi2/0/31    1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Gi2/0/46    1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Te2/1/1     1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Port        Vlans in spanning tree forwarding state and not pruned
Te1/1/1     1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Te1/1/2     1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Gi2/0/31    6,12,100,125-126,129,1032,1096,1128,1160,1192,1224
Gi2/0/46    1,6,12,100,125-127,129,1032,1096,1128,1160,1192,1224
Te2/1/1     none
show spanning-tree interface TenGigabitEthernet1/1/1
Vlan                Role Sts Cost      Prio.Nbr Type
VLAN0001            Root FWD 2         128.53   P2p
VLAN0006            Root FWD 2         128.53   P2p
VLAN0012            Root FWD 2         128.53   P2p
VLAN0100            Root FWD 2         128.53   P2p
VLAN0125            Root FWD 2         128.53   P2p
VLAN0126            Root FWD 2         128.53   P2p
VLAN0127            Root FWD 2         128.53   P2p
VLAN0129            Root FWD 2         128.53   P2p
VLAN1032            Root FWD 2         128.53   P2p
VLAN1096            Root FWD 2         128.53   P2p
VLAN1128            Root FWD 2         128.53   P2p
VLAN1160            Root FWD 2         128.53   P2p
VLAN1192            Root FWD 2         128.53   P2p
VLAN1224            Root FWD 2         128.53   P2p
show spanning-tree interface TenGigabitEthernet1/1/2
Vlan                Role Sts Cost      Prio.Nbr Type
VLAN0001            Desg FWD 2         128.54   P2p
VLAN0006            Desg FWD 2         128.54   P2p
VLAN0012            Desg FWD 2         128.54   P2p
VLAN0100            Desg FWD 2         128.54   P2p
VLAN0125            Desg FWD 2         128.54   P2p
VLAN0126            Desg FWD 2         128.54   P2p
VLAN0127            Desg FWD 2         128.54   P2p
VLAN0129            Desg FWD 2         128.54   P2p
VLAN1032            Desg FWD 2         128.54   P2p
VLAN1096            Desg FWD 2         128.54   P2p
VLAN1128            Desg FWD 2         128.54   P2p
VLAN1160            Desg FWD 2         128.54   P2p
VLAN1192            Desg FWD 2         128.54   P2p
VLAN1224            Desg FWD 2         128.54   P2p
show spanning-tree interface TenGigabitEthernet2/1/1
Vlan                Role Sts Cost      Prio.Nbr Type
VLAN0001            Altn BLK 2         128.109 P2p
VLAN0006            Altn BLK 2         128.109 P2p
VLAN0012            Altn BLK 2         128.109 P2p
VLAN0100            Altn BLK 2         128.109 P2p
VLAN0125            Altn BLK 2         128.109 P2p
VLAN0126            Altn BLK 2         128.109 P2p
VLAN0127            Altn BLK 2         128.109 P2p
VLAN0129            Altn BLK 2         128.109 P2p
VLAN1032            Altn BLK 2         128.109 P2p
VLAN1096            Altn BLK 2         128.109 P2p
VLAN1128            Altn BLK 2         128.109 P2p
VLAN1160            Altn BLK 2         128.109 P2p
VLAN1192            Altn BLK 2         128.109 P2p
VLAN1224            Altn BLK 2         128.109 P2p

Similar Messages

I have a imac 2009 model with osx updated to version 10.5.8 and I can not get update to a 10.6.8 in order to buy osx lion ... what can I do...??thanks

I have a 2009 imac model with the osx with latest updates to 10.5.8.... and I can not get more upgrades ...
I need to upgrade to 10.6.7 or later in order to buy osx lion....
what can I do...??
thanks
peto

http://store.apple.com/us/product/MC573Z/A
or the family pack of 5 licenses
http://store.apple.com/us/product/MC574Z/A
Buy it quick, as many feel that when Mountain Lion comes out SL disks will go to the secondary market at more than $29 for single or $49 for family-pack
Make a good backup first, preferably a clone, as you may need it if the upgrade does fail.

SCCM 2012 client not getting updates, processidtosessionid failed, getfileinfosize failed, createobjectasync error

I have one particular client that will not pull down patches from the site server. The ccmcache folder stays empty, nothing appears in Software Center, report Compliance 5 - Specific Computer says it needs 4 patchs and that they are approved (other computers
get these patches). Four logs look like they have messages of interest:
ASSETADVISOR.log
several lines of "GetFileInfoVersionSize failed for the file C:\temp file under my profile path.tmp, error 2"
MTRMGR.log
"ProcessIDtoSessionID failed for process 12345, error 80070057
No usage will be tracked for process 12345, as failed to get owner info or excecuteable file name, 80070057
No active process found with active id 12345"
this process repeats over and over
INVENTORYAGENT.log
"Failed to get IWbemserice Ptr for for
\\localhost\root\Microsoft\appvirt\client namespace: 8004100E
Failed to enumeate instances of Application: 8004100E
Inventory: 12 Collection task(s) failed "
this pattern repeats over and over. I read on site that this is error set is normal, but I'm not so sure.
INVENTORYPROVIDER.log
This line appears over and over:
"GetObjectAsync - error handling request 80041000f
then I get:
"Fail to return error statu to the wbem user...Shutting down (error: 80041033f, Source: WMI)
CreateInstanceEnumAsync - Error handling request 80041032
CreateObjectAsync - Error handling request 8004100f"
and it keeps repeating.
I can WMI connect to and from this box and the site server.
Ben JohnsonWY

In ccmexec:
"System task SMSSHA_Startup returned error code 0x87d027f
Could not instantiate COM class for a system task. CertEnrollAgentStartupTask.(0x80040154)"
Hi,
The SMSSHA error in ccmexec.log could be ignored if you are not using NAP (network access protection).
"Failed to evaluate installed rule. UpdateID = long SID = 80080005"
Which version of Windows you're running? You could try to run System Update Readiness tool or try to reset Windows Update components.
What is the System Update Readiness Tool?
How do I reset Windows Update components?
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Apps in iPhone and iTunes can not get updated.

Apps store show 10 updates. But there is nothing can be seen in the update. Check the updates fails every time both in iPhone and iTunes .

Apps store show 10 updates.
Which App Store?
The AppStore for MacOS X apps
or the iTunes Store AppStore?
The updates you are seeing in the MacOS X AppStore would be unrelated to the IOS updates.
So where are you seeing updates?

Product ID is not getting updated in SC Goods /Service field

Hi Gurus,
While creating shopping carts in EBP, we are able to find the Product ID from the Good/Service find option, but when we select the Product ID in the search, it's not getting updated in the SC Goods/Service field.Also when we try to find the Cost center / WBS using find button it's not going to the search area after software upgrade.
Could you please suggest us why system is behaving like this.
Thanks
Sada

Hi Gurus,
Any Idea on this.
Also few of the Product ID's are getting updated from the search help to Goods /Service field of the SC and some are not getting updated. while debug the SC , we are geeting the error message as BBP_SC006, Its relavant to catlog. But we are not transfering the Product from catlog to SC item.
The error mesage as: Good/Service & does not exist.
Thanks & regards
Sada

I bought two HD movies and I can not get either one of them to play...help please?

I bought two HD movies and I can not get either one of them to play...help please?

What have you tried?
What happened?
Error message?
Any info?

I was wondering how to get my background back? it just quit on me one day and I can not get it back, I was wondering how to get my background back? it just quit on me one day and I can not get it back

I was wondering how to get my background back? it just quit on me one day and I can not get it back, I was wondering how to get my background back? it just quit on me one day and I can not get it back

explain further please...
Is this your problem?
Program, Utility, Desktop picture, Screensaver won't open or save changes
https://discussions.apple.com/docs/DOC-3046
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused.

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused. I can manually send and receive faxes but I can not do it through the computer.

Try deleting the printer, deleting the job queue and reinstalling the printer again.

Username and password do not get applied to WS Invocations in PS3 project

I am running into a situation where username and password do not get applied to WS Invocations in PS3 project I am deploying using config plan, this is used to work correctly in PS2. Did the syntax for the deployment configuration plans for PS3 BPM have changed?
This is the error that I am getting from the BPM soa_server.log file:
<Feb 9, 2011 1:04:16 PM PST> <Error> <oracle.wsm.resources.enforcement> <WSM-07501> <Failure in Oracle WSM Agent processRequest, category=security, function=agent.function.client, application=default, composite=SpringWorkflow, modelObj=ActivityService, policy=oracle/wss_username_token_client_policy, policyVersion=null, assertionName={http://schemas.oracle.com/ws/2006/01/securitypolicy}wss-username-token.
oracle.wsm.common.sdk.WSMException: WSM-00015 : The user name is missing.
Caused by: oracle.fabric.common.PolicyEnforcementException: WSM-00015 : The user name is missing.
at oracle.fabric.common.AbstractSecurityInterceptor.processResult(AbstractSecurityInterceptor.java:239)
at oracle.fabric.common.BindingSecurityInterceptor.processRequest(BindingSecurityInterceptor.java:95)
I enabled ws logging for incoming and outgoing P6 web service requests, I see that the BPM server is not making an outgoing webservice call, looking more into the log file from soa_server.log I see that the exception is a PolicyEnforcementException confirming my suspicion that the username and password from the deployment config plan are not getting applied at runtime. This is used to work correctly in PS2. Any suggestions?
Config-plan:
<reference name="ActivityService">

<binding type="ws">
<attribute name="port">
<replace>http://xmlns.oracle.com/Primavera/P6/WS/Activity/V1#wsdl.endpoint(ActivityService/ActivityPort)</replace>
</attribute>
<attribute name="location">
<replace>http://x.x.x.x:7001/p6ws/services/ActivityService?wsdl</replace>
</attribute>
<property name="weblogic.wsee.wsat.transaction.flowOption">
<replace>WSDLDriven</replace>
</property>
<property name="oracle.webservices.auth.username">
<replace>admin</replace>
</property>
<property name="oracle.webservices.auth.password">
<replace>admin</replace>
</property>
</binding>
</reference>
Deployment Log from Jdev:
[04:05:01 PM] ---- Deployment started. ----
[04:05:01 PM] Target platform is (Weblogic 10.3).
[04:05:01 PM] Running dependency analysis...
[04:05:01 PM] Building...
[04:05:11 PM] Deploying profile...
[04:05:11 PM] Updating revision id for the SOA Project 'SpringWorkflow.jpr' to '1.0'..
*[04:05:11 PM] Copying file:/E:/dev/bpm11g/springdemo/SpringWorkflow/SpringWorkflow_cfgplan.xml to soaconfigplan.xml*
[04:05:11 PM] Adding soaconfigplan.xml to archive.
[04:05:11 PM] Wrote Archive Module to E:\dev\bpm11g\springdemo\SpringWorkflow\deploy\sca_SpringWorkflow_rev1.0.jar
[04:05:11 PM] Deploying sca_SpringWorkflow_rev1.0.jar to partition "default" on server soa_server1 [x.x.x.x:8001]
[04:05:11 PM] Processing sar=/E:/dev/bpm11g/springdemo/SpringWorkflow/deploy/sca_SpringWorkflow_rev1.0.jar
[04:05:11 PM] Adding sar file - E:\dev\bpm11g\springdemo\SpringWorkflow\deploy\sca_SpringWorkflow_rev1.0.jar
[04:05:11 PM] Preparing to send HTTP request for deployment
[04:05:11 PM] Creating HTTP connection to hostx.x.x.x port:8001
[04:05:13 PM] Sending internal deployment descriptor
[04:05:13 PM] Sending archive - sca_SpringWorkflow_rev1.0.jar
[04:05:15 PM] Received HTTP response from the server, response code=200
[04:05:15 PM] Successfully deployed archive sca_SpringWorkflow_rev1.0.jar to partition "default" on server soa_server1 [x.x.x.x:8001]
[04:05:15 PM] Elapsed time for deployment: 14 seconds
[04:05:15 PM] ---- Deployment finished. ----

We should take a look at the log files to see what's really going on but if you haven't done anything with the installation yet then "reinstalling" is very easy.
In the directory where you launched the jar file, you should find a directory named "crx-quickstart". Simply rename this directory to "crx-quickstart.old" and restart the jar file. Your new environment will be ready in a couple of minutes. Keep the old directory and look into the [your directory]\crx-quickstart\logs directory for details on your original problem.

Inconsistency between R3 and APO. - not getting reconciled in CCR or CPP.

Hi,
We have a PO that is not getting reconciled in CCR and CPP.
it give the message
Unit of conversion from H to KG for the Product "ABCD" is not possible.
this PO has 3 products and off which only one is not getting reconciled. rest two are showing correctly in APO and R3.
The conversion is not maintained in material master for the rest for the two products also....
i have a similar set up in my quality environment. i tired to change the PO with some qty and it refelcts in APO immediately..
Any idea on where the conversion is not happening correctly???
Thanks
Aswath

Hi,
Have u activated detailed application CIF log. Can you check the error details in APO using t-code /n/SAPAPO/C3 or in ECC using t-code CFG1.
Can you also try to send the queue using /n/SAPAPO/CPP. CCR will show no error only when there are no queues in SMQ1 or SMQ2 of both the systems and also no queue pending in postprocessing.
Best regards,
Vaibhav

Excise rate and value is not getting defaulted from the purchase order

Hi all,
While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
Regards
Vishal

Hi,
Follow STO Process for this;
1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
10. Create Delivery: VL10G
12. Picking, PGI: VL02N
13. Billing: VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Rgs

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.

Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon,

HI. I have itunes 10.6.1.7. When I goto movies i am not able to add and when I click on add file to library and select the file and add its not getting added. When i goto Library it says that movies I add are in library.Which I cant add

HI. I have itunes 10.6.1.7. When I goto movies i am not able to add and when I click on add file to library and select the file and add its not getting added. When i goto Library it says "feature films and home movies you add to itunes appear in movies in your iTunes library. To play a movie, just double click it". And below are two options for Downloading movies from store and rent movies. Please help.

I get the exactly the same problem with win 7, i rang apple support who suggested i try another machine/or create another account on my machine???? why should i, stupid ipad 3rd gen is now sitting here un syncable, apple support ....tut tut very poor support, its a shame im out of the 7 day period otherwise this ipad would be going straight back, older versions of itunes worked fine, some one must know a fix for this??

I deleted the playlists on my iPhone and when I now try to synchronize with my iTunes account to put the music back, nothing happens and I do not get the music back on my iPhone. Anyone who knows why that could be? Grateful for any suggestions!

I deleted the playlists on my iPhone and when I now try to synchronize with my iTunes account to put the music back, nothing happens and I do not get the music back on my iPhone. Anyone who knows why that could be? Grateful for any suggestions!

I know it sounds weird, and that is the reason I posted my question. Because my case is not like all the ones I've found online and it's confusing. I added a screen capture of my itunes with my old iphone (the one that houses my playlists) connected to it.
My playlists "ARE" in my iphone 4s. They are still there even though they do not show up when I plug in to itunes in my computer.
When connecting my phone to itunes on my macbook, the playlists do not appear anywhere in itunes. I have found my connected iphone icon, I have clicked on the arrow next to it and it does pull up the standard lists that come with the iphone/itunes: Music, Movies, TV shows, books. That's it! below that is "Genius" and below "Geniuns" is "PLAYLISTS" but the only playlist of mine that shows there is one that I created several years back titled "90's music" and that one I created it on my computer, not my phone. Under "90's music" there are also other standard playlists that itunes automatically adds.
Does anyone else have this issue or know how to get around this. I am starting to think that I am going to have to recreate these lists on my computer

I had a crash of the mac 10.4.11 after I restarted my comp the google toolbar vanished and i can not get it back it does not install ((( all my bookmarks are there

I had a google toolbar on my 3.6 firefox for at least one year . After my Mac crashed and I restarted everything it vanished and i can not get it back I tried to reinstall it does not work and when i go to add ons it tells me it is not available for 3.6 Firefox All my bookmarks re there (((

Yup, your question and Diane's answer helped me also. Tho' I had had problems before getting into the iTunes store I always managed to find a way. Today they had me blocked cold with the "Update to 10" advert no matter what I did. Other questioners are being told, incorrectly as it turns out, that they have to update their OS to accomodate iTunes 10 and upgrade to iTunes 10. I did the download which did not take up much more room on my crowded old hard drive and now I'm back in business.

VTP (revision numbers) and one client not getting updates

Similar Messages

Maybe you are looking for