VVM Connection to SCCM and SCOM
Hi,
i was wondering how do i connect Virtual Machine Manager to Configuration Manager. do i need to have operations manager installed and up and running? or can i connect it to SCCM directly as it is being the main component.
From my understanding of the VMM is that it is used for provisioning and controlling of Hyper visors (cytrix, Vmeare, etc.).
why do i need to go through the Operation Manger? why can i not connect directly to SCCM?
whats the Advantages of using operations manager instead of using CM?
Thanks.
Hello There,
I do believe you need to understand better why you need SCCM, SCVMM and SCOM first.
System Center 2012 is a series of Software:
SCVMM will work integrated with Hyper-V Computers to enhance its functionalities, to deploy VM templates and facilitate your work with the Virtual environment.
SCCM will manage applications, packages, software updates, generate reports, compliance, deploy operating systems etc.
SCOM is the framework to monitor your environment, it uses Management packs to monitor health state for servers, network interfaces and much more in your environment.
I'm not sure if the answer I've given may help.
Let me know if this is the question you have.
Thank you very much!
Renato S. Pacheco
Similar Messages
-
What is Licensing Method for SCCM and SCOM 2012
What is Licensing Method for SCCM and SCOM 2012
We have 75000 clients, so we going to implement SCCM and SCOM 2012 environment in azure. Actually we plan to go for One Central Administration site and three primary sites (to manage this clients), going to host in Azure. I need to know how the licensing
process work for this environment, how many licenses we need to get for this? is charging for Client based, Site based or environment based? Please update.
Thank you
Fazal
Fazal(MCTS)Hi,
Running the SCCM and SCOM servers themselves in Azure to manage clients outside azure is not really supported if I remember correctly..
http://blogs.technet.com/b/configmgrteam/archive/2013/10/23/configmgr-and-endpoint-protection-support-for-windows-azure-vms.aspx
Licensing is explained here.
http://www.microsoft.com/licensing/about-licensing/SystemCenter2012-R2.aspx
In short for Client OS you need a cal per client, included in Core CAL and Enterprise CAL.
For servers it is licensed per CPU and can be licensed for all virtual servers on a host as well, included in the guide above.
ps. side note a CAS is not really necessary in most case if you don't have more than 100'000 clients, it adds a lot of complexity and I would avoid it if I could.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
SCCM and SCOM 2012 R2 Databases on one box
Our current situation is: About 150 Servers(VMware) and 600 windows 7 clients.
SCCM 2007 and SQL 2008 on one box, and for SCOM 2007 we have a dedicated SQL2005 VM. All of them on W2K3R2 OS.
Because of end of support for W2K3, we are not going to upgrade the servers.
New situation is SCCM and SCOM 2012 R2 with SQL 2014 on W2k12R2. I'm considering to install one SQL 2014 server only for SCOM and SCCM. Would performance be an issue??
I've read http://www.hasmug.com/wp-content/uploads/2012/10/07-201210-Oct-SQL-Server-Optimization-and-Best-Practices-for-System-Center-Administrators-Kevin-Holman.pdf
and other articles, but couldn't find info about the pro and cons having both SCOM and SCCM DB's on one SQL 2014 server
ThanxHi,
Please refer to the following articles:
SQL Instances and System Center 2012 (#SYSCTR #SQL #SCOM #SCCM #SCSM)
http://www.systemcentercentral.com/sql-instances-and-system-center-2012-sysctr-sql-scom-sccm-scsm/
SCOM 2012 and SQL Server Question
https://social.technet.microsoft.com/Forums/systemcenter/en-US/fabf4318-4de6-4627-9f6d-71834ac2bcab/scom-2012-and-sql-server-question?forum=operationsmanagerdeployment
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
SCVMM and SCOM 2012 Integration Issues
Hello, I have integrated SCOM 2012 RTM and SCVMM 2012 RTM and am having lots of issues that were not present with 2007/2008 family integration. For starters, my SCOM environment manages multiple untrusted domains, etc. When enabling VMM integration
I now get hundreds of alerts about "Unable to verify Run As Account", stating that is cannot login as the VMM service account for all clients that don't live in same domain as SCVMM server. For starters why do my physical servers, and all VMs need
to be distributed with this account? The alert is also expected logically, because this is impossible to distribute a Run As account to every agent in a multi-domain untrusted environment. Also according to this configuration, the Virtual
Machine Manager Connection Account created in SCOM is set to less secure (distributed to all agents), which is why the alert is coming up; additionally less secure setting is typically bad practice. Why does SCVMM do this by default? Can it be
changed? What are options here? It seems to me only the SCOM management server should need this Run As account, not every agent? Thoughts on this? Thanks!I'm running SCVMM 2012 R2 and OpsMgr 2012 R2. I have the integration setup and have had the same issue with the RunAs account logging on to workgroup computers.
I tried changing the account distribution to More secure and only targeting my two management servers and the VMM server. I also changed the profile so that it targeted only the Windows Computer object for the same three servers. I came in this
morning and I do not have the "Run As Account Could Not Log On" message anymore on the workgroup computer, but now I have an alert "VMM Agent Not Monitored By Operations Manager" for the VMM server. I look at the Health Explorer and see that the agent
is reachable but its not being monitored.
I tried changing the RunAs profile back to "All Targeted Objects" but monitoring still didn't restart. Then I tried restarting the OpsMgr agent and then the VMM agent, but still the status did not change. Now, I have just set the account back
to Less secure and have again received the warning from the workgroup computer about not being able to log on. I'll wait a little longer to see if the VMM server begins to be managed.
Any experience with this? -
My iphone battery died and on charging the phone it asked me to connect to itunes and restore the phone.
If i restore the phone how can i get my data back and how can i check when i last backed up my phoneIf you have been syncing regularly as the iphone is designed, then you can sync the data back.
Regardless you will have to restore the iphone. -
Connection between O and BP is missing
Hi,
When i check inconsistency for a user, i am getting " Connection between "O" and "BP" is missing. When i check the Org.unit in PPOSA_BBP, i could see no BP exists for that Org.unit where user is assigned. I have replicated the org.unit from HR system but yet the BP hasnt been generated. Can you please share your idea on this.
Regards,
Prasath JHi Prasath,
This might be because you need to assign the user to a Purchasing Organisation or a Purchasing Group. If the user do not have BP created then you can do this by using tcode USERS_GEN.
Go to USERS_GEN and follow below steps :
1. Select Create User From Existing SU01 user
2. Enter the org id of the POrg or Pgroup under which you want to assign the user
3. Select country and execute
4. In next window one popup will occur, select Area Of User
5. In next popup enter the user id
6. Next select the user and click Ok.
7. This will create a BP and CP for the user and assigns the BP to the Org id of the POrg or Pgroup.
8. Now check the consistency of the user it will show all green.
It might give you error like eMail id for BP XXXXX is missing if the SU01 profile of the user does not contain any user id but it is not critical.
You can open the BP in BP tcode and enter the email id of the user.
Let us know if it solves your issue.
Regards,
Mayur -
I have an Iphone 5 6.01. I have a notice on my app store that I have an update. Tried to update, but it won't. Connected to Itunes and tried to download update for App. I can't do that either. It won't let me update any of the apps. What is wrong?
My husband and I are using the same iTunes account on all mac & pc computers, but the libraries are different on each machine. We always manually manage our music (no auto sync). iTunes is up to date on the PCs. My husband uses our joint iTunes account on his pc, but once again, has a different collection in his library from those on the other machines. He can't load any music from his PC to his iphone 4. I can load music from my mac library to my iphone 4s, but cannot load from my pc library to my iphone 4s. How can I switch my main library that it syncs with from the mac to the pc?
Thanks -
Dear Apple Support,
Good day to you.
This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
After restoring it my ipad is now opening and it is like new that i need to set up again.
I set up again until i reach the apple id and password.
I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
What will I do? Please help.
Thank you
Sent from my iPhone
Begin forwarded message:
From: Apple <[email protected]***>
Date: October 9, 2013 at 11:53:53 PM GMT+4
To: ****
Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini
Dear Leslie J.,
Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
Apple Support
<Email Edited By Host>1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working? -
iTunes RADIO is not working.
“iTunes could not connect to the iTunes Store. Make sure your internet connection is active and try again.” Try as I may, as many as ten attempts, trying to connect after restart, after shutdown, nothing works. Just so …
iTunes STORE not “connectable” with my otherwise perfectly-working internet connection, viable, up and running for all other uses.
Simply put, firstly, I can't connect to the internet when I click on Radio. People are quite suspicious that this is Apple incompetence or your company's famous arrogance for this commonly-suffered problem that you won't or “can’t” fix.
Read the many web comments and you won’t be pleased with yourselves: the suspicion is that if you ruin internet radio on iTunes, Apple will somehow make more money on music downloads, etc. Bull.
Also, thirdly, my old playlist of 20 or so internet radio stations in the Ambient category STILL PLAYS !
Then fourth, I installed the latest available version of QuickTime Player 7.app Version 7.6.6 but it didn’t solve the problem either. I had QuickTime Player.app Version 10.2, but substituted what Apple website said was the latest, LOWER NUMBERED QuickTime Player version of 7.6.6
Fifth, I can't connect to iTunes store no matter what I do or what user group's advice I try. So I can’t buy or download anything from iTunes. Bad for business.
Sixth, I updated to the latest version of iTunes but this weird problem remains. All suggested Apple fixes or user group fixes are useless. Where is Apple’s famous technical competency, vaunted customer support?, and user-friendly product reputation? Get it back, please.
Solve this problem of yours ASAP for us, your numerous disgruntled, dissatisfied customers of iTunes. You can do better, should, and really –in all fairness- must.
===============================================================
NOTE: no password for iTunes exists in my Keychain. Is this a problem?
Apple ACCOUNT ID, and iTunes ID password, works but not to access iTunes with my healthy internet connection.
Apple store id It works via direct internet connetion but not through iTunes. Very strange.
===============================================================
FYI, Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 16 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.69f4
Serial Number (system): C0*******F8V
Sudden Motion Sensor:
State: Disabled
Intel 6 Series Chipset:
Vendor: Intel
Product: 6 Series Chipset
Link Speed: 6 Gigabit
Negotiated Link Speed: 6 Gigabit
Description: AHCI Version 1.30 Supported
M4-CT512M4SSD2:
Capacity: 512.11 GB (512,110,190,592 bytes)
Model: M4-CT512M4SSD2
Revision: 040H
Serial Number: 0000000012330912E75A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Solid State
TRIM Support: Yes
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
disk0s2:
Capacity: 511.25 GB (511,250,432,000 bytes)
BSD Name: disk0s2
Content: Apple_CoreStorage
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk0s3
Content: Apple_Boot
Volume UUID: 600737FB-7A29-3BAE-859E-CBFE2E90C39A
<Edited by Host>This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013 -
How to connect my iPhone and iPad to Apple TV
How to connect my iPhone and iPad to Apple TV
Connect the iPad and Apple TV to the same WiFi network. Double Tab the home button on the iPad and then swipe your recently used apps from left to right until you see the mirroring icon which looks like a retangle with an up arrow. Tab that icon until you see the Apple TV. Tab Apple TV and slide the slider to the ON position. You should now see your iPad screen on the TV the Apple TV is connected to.
-
How to connect my iPad and iPhone to my new apple tv ?
how to connect my iPad and iPhone to my new apple tv ?
Also, make sure that all devices are on the same Wi-Fi network (e.g. not on a "guest" connection), and verify the ATV settings to see that AirPlay (and HomeSharing while you're at it) are turned on.
-
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Since iOS 7.1 my phone won't turn on and is asking me to connect to iTunes. I connect to itunes and it says it needs to be restored. Not sure why. I try to restore it and then it says something went wrong and it won't work. So I've been without my phone for a couple days now. It gives me error code (29). The phone almost reboots and then 3/4 of the way through it gives me the error message.
If using windows...
Temporarily disable your firewall and antivirus software and try again...
http://support.apple.com/kb/TS1379
See iTunes Connection Issues here...
iTunes for Windows: Troubleshooting security software issues
NOTE:
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download -
my iphone is stuck, it says connect to itunes, and when I aconnect it to my pc, my pc says restore data but everything will be erased and I don't wanna lose everything. please help me
If you have a graphic of iTunes and a cable displayed on your iDevice then it is in Recovery mode.
Check this to try an "exit"
http://osxdaily.com/2011/01/08/iphone-recovery-mode/ -
I am trying to connect to FaceTime and I message but I am getting a message check my network setting.i tried changing the Dns number but it's not working.Any ideas
Do other USB devices work on your MBP?
Does this USB stick work on other MBPs?
There is a possibility that the stick requires more power than the MBP delivers. Try it on a powered hub.
Ciao.
Maybe you are looking for
-
Creative Cloud for Teams - lost access
I'm the account manager for Creative Cloud for Teams, but my account is now showing that I just have a free trial. The other member of my team has full access still but no admin rights. How do I correct?
-
I have an iPhone 4. When I use iCal (which is now synched to my Macbook) which is housing my google calendar, I can't invite anyone to my events in iCal. I have to go to the google calendar website and schedule it from there. My wife has a 4S and
-
Optical drive no longer reads disks, Optical drive no longer reads disks
Hi folks, never really had a terrible problem with this computuer until the last few months with the battery wearing out and having to replace the charging cord twice but now it seems like I have a problem here. Earlier today, less than an hour ago,
-
How to make a round Slider with an image ?
hello everybody, I'm back and i have a new question : how to make a round Slider (like a volume knob) with an image ? I see this very interisting tutorial : http://fxexperience.com/2012/01/fun-javafx-2-0-audio-player/ but it use a private class from
-
Problem in Installing R12 on windows xp
post installation checks failed at installing R12 on windows xp the details are Environment File Database ORACLE_HOME environment file passes instantiated variables test: File = D:\oracle\VIS\db\tech_st\10.2.0\VIS_mzq.env RW-50016: Error: - Apps ORAC