WAE 612 deployed in HA - how do I set it up????

Can anyone give me some advise of deploying WAE at a branch site in HA Mode?
Is it possible for them to work in some kind of HA mode?
I don't plan on having the devices inline - So they will both be connected to a switch and use WCCP (well that's the plan anyway)
Any advise is welcome

Hi,
Just make sure to configure all your WAEs at a given site to talk to the same set of WCCP routers using the same WCCP services (WAAS uses WCCP services 61 and 62 by default). In this case, WCCP will automatically load-balance between all WAEs available in the WCCP cluster. WCCP will also adapt the load-balancing scheme whenever a WAE leaves or joins the WCCP cluster, thus achieving HA (if only a single WAE remains in the cluster, all load will be sent to that remaining WAE).
Please find further information on WCCP here:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v441/configuration/guide/traffic.html
Regards,
Michael

Similar Messages

  • How can i set a path for my deployment files in weblogic server 10.3

    Hi
    How can i set the path for my WAR ,JAR files while deploying.i am using the wls10.3 version.
    is there any scripts for this ,please provide me.
    my Application is ADF 11g application.

    By "path", I assume you mean "classpath".
    The simplest way is simply to include the jars you need inside the web application or web module's WEB-INF/lib directory, EJB module's META-INF/lib directory, or EAR lib directory.
    If that's not practical, if you use NodeManager to start your servers, you can go to the "Server Start" tab in the server definition in the WebLogic console and edit the "Classpath" field, which defaults to no value. You can specify a classpath value there. Note that if you specify a value there, it REPLACES the default classpath for the server, it doesn't add to it. If you need to just add to it (a much more likely scenario), if the value references the value "$CLASSPATH" in it, that will reference the original classpath value that the server would have had.
    So, for instance, if you wanted to include the MQ jars in the server classpath, you could set a value like this:
    /usr/java/mq/lib/mq.jar:/usr/java/mq/lib/mqstuff.jar:$CLASSPATH

  • WAE 612 + ACNS 5.5.5 Help

    I've been trying to setup a WAE 612 w/ ACNS 5.5.5, and I've run into a few problems. The goal is to setup a transparent forward proxy for WMT files. This is a standalone unit. The edge router that this device is hooked up to is a Cisco 7206VXR running IOS 12.4(12).
    Initially, I configured WCCP outbound redirects on the WAN facing port of our edge router, and WCCP traffic seemed to be generated between the content engine and the router. `show statistics wccp gre,` it would return something like the following:
    Transparent GRE packets received: 54919
    Transparent non-GRE packets received: 0
    Transparent non-GRE packets passed through: 0
    Total packets accepted: 1134
    Invalid packets received: 0
    Packets received with invalid service: 0
    Packets received on a disabled service: 0
    Packets received too small: 0
    Packets dropped due to zero TTL: 0
    Packets dropped due to bad buckets: 0
    Packets dropped due to no redirect address: 0
    Packets dropped due to loopback redirect: 0
    Connections bypassed due to load: 0
    Packets sent back to router: 53785
    Packets sent to another CE: 0
    GRE fragments redirected: 0
    Packets failed GRE encapsulation: 0
    Packets dropped due to invalid fwd method: 0
    Packets dropped due to insufficient memory: 0
    Packets bypassed, no conn at all: 0
    Packets bypassed, no pending connection: 53785
    Packets due to clean wccp shutdown: 0
    Packets bypassed due to bypass-list lookup: 0
    Packets received with client IP addresses: 0
    Conditionally Accepted connections: 0
    Conditionally Bypassed connections: 0
    L2 Bypass packets destined for loopback: 0
    Packets w/WCCP GRE received too small: 0
    Packets dropped due to IP access-list deny: 0
    Packets fragmented for bypass: 21
    Packet pullups needed: 21
    Packets dropped due to no route found: 0
    Unfortunately, when the clients attempted to call up a WMT video, it would go through the process of buffering, initializing, and going to a ready state; but the video would not play. The 'show statistics wmt all' would only increment the error counter with each play attempt; none of the other statistics from this command would change.
    Next I attempted to just set this up as a non-transparent WMT proxy and configured an individual test Windows 9 Media client to reference the WAE as an RTSP proxy. It experienced the same problem as above. 'show statistics wmt all' would still only show error count increases with each attempted video, but nothing else would increment. This leads me to believe that the problem is not WCCP related, but something with my WAE configuration. I can successfully traceroute from my WAE to the video server; likewise, I can traceroute without problems from the WAE to my Windows media client machine.
    Also, when I do commands such as 'show statistics mediafs,' the values for 'space used by WMT proxy' sometimes increments for an attempt to load a video; at best, the increase is about 12KB.
    Here's the current WAE configuration file:
    contentengine#show running-config
    device mode content-engine
    hostname contentengine
    ip domain-name blah.domain.com
    interface GigabitEthernet 1/0
    ip address 172.16.0.1 255.255.255.248
    exit
    interface GigabitEthernet 2/0
    shutdown
    exit
    ip default-gateway 172.16.0.6
    wmt evaluate
    wmt accept-license-agreement
    wmt enable
    wmt max-concurrent-sessions 2500
    no auto-register enable
    ip name-server 172.16.0.9
    logging disk priority warning
    transaction-logs enable
    username admin password 1 jEy9iH6cH3x2s
    username admin privilege 15
    authentication login local enable primary
    authentication configuration local enable primary
    sshd enable
    mediafs-division wmt-cache-space 100 real-cache-space 0
    ! End of ACNS configuration
    Thanks -Mike

    try this configuration link:
    http://www.cisco.com/en/US/docs/app_ntwk_services/waas/acns/v53/configuration/local/guide/53ldg.html

  • WAAS 4.0.9 /WAE 612-K9 not accelerating

    I have a central site and four remote sites connected via leased lines, I receive a demo with 3 WAE-612-K9 (4.0.9 s/w version)for testing purposes. I connect one WAE as a CM and one WAE as application acceleration at the central site and the another at the remote site. I want to have Web and MS Exchange acceleration at first but I don't see any improvement. The central site have one 3845 router and the remote 2811 both with IOS 12.4(13c) version. Any help please ?

    Yes I see some connetions to be optmized, my problem/question is why I cannot see http optimization for my intranet site since the traffic is marked PT .
    I am using the default policy in both WAEs , as I can see the policy marks http traffic to be full optimized.
    On the cms I cannot see any Reduction taking place , all traffic marks as 0.
    In both WAEs sh statistics dre shows all 0's
    and no hard drive space used.
    The mail servers are MS Exchange 2003 with smtp connectors between them , one server per site. It's possible to improve e-mail too ?
    Topology
    Central site->3845-->2811-->Remote Site
    | |
    WAE WAE

  • WAE-612-K9

    Hello, I have the following problem, after finish the rebuild of my Raid-1 in the WAE-612-K9 equipment, it show a critical alert:
    - CMS STATUS IS OFFLINE.
    I try ACTIVATE the WAE via  web interface , but this doesn´t work.
    Please somebody have any ideas about what happend....???
    The version of software is 4.1.3A.
    Thanks very much for you help.
    Regards
    Fernando.

    Do you have telnet/ssh access to the device?  If so you need to deregister the device and then re register the device. I am no expert, but this will fix the issue at the expense of histrical data.
    WAASName> cms deregister /force
    WAASName> config terminal
    WAASName#> cms enable
    WAASName#> exit
    wr mem
    Rob

  • How do you set default programs for all users when deploying Windows 8.1?

    I have my Windows 8.1 image set up the way I want including the start screen, theme, etc. But how can I set the default programs for all users. Most of out computers are non-touch and I want the desktop apps (e.g. Windows Photo Viewer), not the store apps
    to be the default for opening pictures, videos, etc. Can that be done?

    Great question, this has been bugging me too!
    So, I did some research by using "Set Default Programs" app in Windows 8. Then I ran the super ProcMon.exe tool from Sysinternals.com <Thanks Mark!>
    After filtering out the junk, I could see some *interesting* writes to the registry:
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.jpg\UserChoice]
    "Hash"="57y87/ogggU="
    "ProgId"="PhotoViewer.FileAssoc.Jpeg"
    But the "Hash" part had me concerned. I did some internet searching for the hash, and came across a post and a pointer to a blog with some answers.  This is both good news and bad.
    Background:
    One of the problems with Windows XP is that any program can come in and party on the entire system. No, I don't want you to put a shortcut on the desktop, install a crappy IE Toolbar, and change the default file association for *.jpg files to your app, I
    just wanted to play a stupid game. Since Windows 7, Microsoft has been attempting to block that functionality from the stupid applications, and give them back to the user. Take note of the last line in the ITaskbarList3 interface:
       Applications cannot programmatically pin themselves to the taskbar. That functionality is reserved strictly for the user.
    Of course that sucks for us IT Pros who may wish to create *default* working environments for corporate images, but there are some tricks we can do.
    Solution:
    This blog appears to have the answer:
    http://blogs.technet.com/b/mrmlcgn/archive/2013/02/26/windows-8-associate-a-file-type-or-protocol-with-a-specific-app-using-a-gpo-e-g-default-mail-client-for-mailto-protocol.aspx
    New for Windows 8 is a dism command: /Get-DefaultAppAssociations that allows you to export a control case from a known good computer. Microsoft the supports importing the exported xml file via GPO. For example, before I changed the file association, .AVI
    was pointing to the Modern App, after the change the /export-DefaultAppAssociations shows change to the new app:
    From:
    <Association Identifier=".avi" ProgId="AppXhjhjmgrfm2d7rd026az898dy2p1pcsyt" ApplicationName="Video" />
    To:
    <Association Identifier=".avi" ProgId="VLC.avi" ApplicationName="VLC media player" />
    I am still doing some investigation to see if a GPO is required, or if you can inject the association into a local user account. Also, if you do have some Modern Windows 8 Touch Tablets, it would recomend keeping most of the Modern App defaults in place,
    perhaps seperate GPO's for Desktops/Laptops vs Tablets?
    -k
    Keith Garner - keithga.wordpress.com

  • Have an airplay enabled AV Receiver - how do i set up Airplay    I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the

    have an airplay enabled AV Receiver - how do i set up Airplay
    I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the iphone App and via the web browser option.
    Do I need Apple TV or to change some settings somewhere?
    Any help would be greatly appreciated

    You are making some progress with setup of wireless network. Apparently there is reliability problem with the wireless connection. Perhaps you want to refer to following Apple support documents and start tweaking parameters in the router to improve the reliability. I used to have third-party routers such as Belkin and Netgear but switched to Apple Airport routers (Time Capsule then Airport Extreme for now) because of incompatibility issues whenever Apple upgrade Mac OS X. But since Apple develops Airplay protocol as alternative to Bluetooth for wireless audio/video streaming (with much better bandwidth) and must be deployed in any wireless network, there is no reason third-party routers not working for Airplay protocol.
    About AirPlay Mirroring in OS X Mountain Lion:
    http://support.apple.com/kb/HT5404
    iOS: Recommended settings for Wi-Fi routers and access points:
    http://support.apple.com/kb/HT4199
    Troubleshooting AirPlay and AirPlay Mirroring:
    http://support.apple.com/kb/TS4215
    Good luck in setting up 802.11 wirelesss network.

  • How do I set up a user account on a Macbook Air

    I am trying to help an elderly neighbor whose son gave her his Macbook Air to use but he is the Administrator and has been recently deployed overseas and she cannot contact him. How can I set her up with her own account on his computer without his Administrator password?

    Hi there KARMS1!
    I have a couple of articles here that can help you with this situation. Depending on the operating system installed on your MacBook Air, you may be able to reset the password. If you are running OS X 10.6 Snow Leopard on the MacBook Air, you will want to reference this article:
    Mac OS X 10.6: If you forget your administrator password
    http://support.apple.com/kb/ph6317
    However, if your operating system is later than that, you will need to erase the computer and reinstall the operating system, effectively deleting the administrator and all information on the computer so that you may create a new administrator account:
    OS X Mountain Lion: Erase and reinstall OS X
    http://support.apple.com/kb/ph11273
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • How can I set BPEL server enviorment and create BPEL domain?

    Without use the http console, how can I set BPEL server enviorment and create BPEL domain?
    When I try to use API like below
    import com.oracle.bpel.client.Server;
    Server s = new Server(ServerAuthFactory.authenticate("oracle","localhost"));
    But I always got four exceptions and one warning like below:
    java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
    java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\ejb.properties (The system cannot find the path specified)
    Warning: unable to read transaction.interoperability config property
    java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
    java.lang.Exception: Failed to create "ejb/collaxa/system/ServerBean" bean; exception reported is: "javax.naming.CommunicationException: Can't find SerialContextProvider
    Is it right to use com.oracle.bpel.client.Server like this, please help me.
    Best regards,
    Vita

    Anyone can help me? Because I need deploy BPEL process on production server, so I need the Java funtion to create domain. Thank you very much if you can tell me the correct method of using com.oracle.bpel.client.Server API.

  • Formatting issues: when I open a msg, the font is sooo small you need a magnifier to read it. How can I set the font size to one I can easily read?

    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    I have various formatting issues:
    a. When I open a msg from my web browser (Cablevision), the font is sooo small I need a magnifier to read it. How can I set the font to a size I can easily read?
    b. When I forward msgs, the text gets all distorted and I need to clean it up (some symbols, lots of spaces between words). How can this be fixed?
    c. When I want to tell someone about a website, I cannot type the URL in so that all they have to do is click on it. How can this be fixed?
    d. When I open messages, the text opens in a small window and covers the "Show Images" button. Why?
    == This happened
    ==
    Every time Firefox opened
    == Ever since I started using Firefox (a few months ago)
    ==
    '''Troubleshooting information'''
    I didn't find any results
    == Firefox version
    ==
    3.6.3
    == Operating system
    ==
    Windows 7
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
    == Plugins installed
    ==
    *-nphpclipbook
    *Office Plugin for Netscape Navigator
    *The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
    *Default Plug-in
    *Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
    *NPRuntime Script Plug-in Library for Java(TM) Deploy
    *The Hulu Desktop Plugin allows Hulu.com to integrate with the Hulu Desktop application.
    *Shockwave Flash 10.0 r45
    *Adobe Shockwave for Director Netscape plug-in, version 11.5
    *iTunes Detector Plug-in
    *3.0.40624.0
    *NPWLPG
    *Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

    The text editor is the text area that you use on the webmail (Yahoo, Hotmail) website to create a new mail.
    You can compare that with the ''Post new message'' text area that you use to create a new post on this forum.
    Just above the text area that you use to enter the message text there is usually a button bar with buttons that allows some text formatting like Bold and Italic and can also include a button to make a clickable hyperlink.
    Check the tooltip of each button by hovering with the mouse over each button.
    Make Link - https://addons.mozilla.org/firefox/addon/142

  • How can I set a Session bean timeout

    Hello !
    How can I set a Session bean to time out eg. 48 hours ?
    Thanks
    Uiloq Slettemark

    For stateful session beans you can use the timeout attribute in the orion-ejb-jar e.g.
    <session-deployment timeout=1800 ..>
    this is specified in seconds and Default Value: 30 (minutes)
    regards
    Debu

  • How can i set up SSL in OC4J

    How can i set up SSL in OC4J ?.
    I have success fully installed oc4j and applications were deployed in it , it works perfectly , what should i add more to make the server SSL enabled ? , after these i have to make access of EJB from client Aplet/Application through SSL , how can i make it , I expect links to documentations, i searched in the forum but i couldnt find , plz help me
    Renjith

    It's not recommended to setup OC4J to use SSL since the OC4J container should be dedicated to J2EE services. In a production deployment environment, OC4J should be used behind the Oracle HTTP Server (based on Apache), so you should setup SSL for Apache instead. Please see 9iAS documentation at http://otn.oracle.com/docs/products/ias/doc_library/1022doc_otn/index.htm, look for mod_ssl and OpenSSL).
    However, if you do want to play around with SSL in OC4J standalone mode, you could setup SSL following the following instructions (note this is not supported):
    http://www.orionsupport.com/articles/ssl-howto.html

  • How can I set the data binding between Web Dynpro & Database table

    Dear friend,
    I am a beginner of Web Dynpro. I want to develop my simple project like these:
    1. Create my own database table via Dictionary Project such as TAB_USER and have 3 fields: USER_ID, USER_NAME, USER_POSITION and I have already deployed & archived it.
    2. Create my own Web Dynpro Project, and create the input fields as User ID, User name, User position and icon 'Save' on the selection screen and I have deployed it already.
    For the process, I want to input data at the screen and save the data in the table, please give me the guide line like these:
    1. How can I set the data binding between Web Dynpro and Database table ?
    2.  Are there any nescessary steps that I will concern for this case?
    Sorry if my question is simple, I had try  to find solution myself, but it not found
    Thanks in advances,
    SeMs

    Hi,
    You can write your own connection class for establishing the connection with DB.
    Ex:
    public class  ConnectionClass {
    static Connection con = null;
    public static Connection getConnection() {
    try{
    Context ctx = new InitialContext();
    DataSource ds = (DataSource) ctx.lookup("jdbc/TSPAGE");
    con = ds.getConnection();
    return con;
    }catch(Exception e){
    return null;
    You can place the above class file in src folder and you can use this class in webdynpro.
    You can have another UserInfo class for reading and writing the data into the DB .
    Regards, Anilkumar
    PS : Refer
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/java/simple java bean generator for database.pdf
    Message was edited by: Anilkumar Vippagunta

  • I have an Airplay enabled AV Receiver - how do i set up Airplay

    I have an airplay enabled AV Receiver - how do i set up Airplay
    I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the iphone App and via the web browser option.
    Do I need Apple TV or to change some settings somewhere?
    Any help would be greatly appreciated
    Astonp

    You are making some progress with setup of wireless network. Apparently there is reliability problem with the wireless connection. Perhaps you want to refer to following Apple support documents and start tweaking parameters in the router to improve the reliability. I used to have third-party routers such as Belkin and Netgear but switched to Apple Airport routers (Time Capsule then Airport Extreme for now) because of incompatibility issues whenever Apple upgrade Mac OS X. But since Apple develops Airplay protocol as alternative to Bluetooth for wireless audio/video streaming (with much better bandwidth) and must be deployed in any wireless network, there is no reason third-party routers not working for Airplay protocol.
    About AirPlay Mirroring in OS X Mountain Lion:
    http://support.apple.com/kb/HT5404
    iOS: Recommended settings for Wi-Fi routers and access points:
    http://support.apple.com/kb/HT4199
    Troubleshooting AirPlay and AirPlay Mirroring:
    http://support.apple.com/kb/TS4215
    Good luck in setting up 802.11 wirelesss network.

  • How do you set up your Configuration Manager client when Imaging?

    OK everyone we got an issue that we need to take care of sorry if this seems like a dumb question but we cant seem to make this work.  How do you set your configuration manager client when you deploy your image(s)?  I created package and pointed
    it right to the config manager install directory just like the recommended one for USMT but it does not seem to work.  I also tried to leave it blank but it appears to be mandatory.. So my question how do YOU get it to work for your areas?
    Thanks

    that might be the problem I dont see a "Microsoft Configuration Manager Client 5.0 All" anywhere. We threw something together that points to:
    \\Server.Domain.com\SCCM_Install\SMSSETUP\CLIENT
    What is happening is this.
    Have a task to deploy Windows natively to the workstation
    Drop applications to the workstation
    do updates
    capture back to server
    All it does is 
    Drop the OS down
    copy the Agent files
    join to the domain
    reboot
    sit
    sit 
    and sit

Maybe you are looking for