Waiting data file from another application

Hi,
I would appreciate your help with the following problem:
I am executing an application from within my java application as a process and waiting until it finishes. I need the results file from that application to be read from within mine. The problem is that this application creates other processes that dump the results files long after its main process has informed my application about its successfull execution. The question is, how can I be sure that the particular result files are already written to the end and closed by those hidden for me processes.
Thank you in advance!

If I understood well, you're saying that :
1) you have to wait for the results before proceeding with your application, and you do not have control over the writing processes so that you cannot use some kind of async notification (e.g JMS),
2) Even when your app is informed of the success of the operation, at that exact time you are not getting the result files you need to proceed. So being informed of success and being able to proceed happen at different times ?
In that case, the one solution that comes to mind is 'polling' :
When you're being informed of success, spawn a separate thread (to prevent app freezing) that continuously polls the result files in a while loop.Or, if you don't want to waste CPU cycles, make the thread sleep for a while and try again at regular intervals.
Less than perfect solution, but I don't see any other alternative ..
You'll then have to figure out what to do with your app while you're trying to get the results...
Hope this helps a bit.

Similar Messages

How do I open library file from another application?

I'm trying to upload a picture from my IPhoto library to the internet. When the internet program asks me to name a file, I browse my "Pictures" folder. And I see the iphoto library there, but it is not available to select. I need to be able to select an individual photo file.
I've worked around this by first copying the file from the library to my desktop, but that's cumbersome and shouldn't be necessary.
How can I do this?
Thanks,

There are many, many ways to access your files in iPhoto:
*For Users of 10.5 Only*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and 10.5* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

How to open Adobe Reader file from another native IOS application?

There is an existing thread, but I want to re-open it because I think this is an important feature that we need badly. I was wondering if there is any plan to add this feature so we can open PDFs directly into Adobe from the web / other apps.
How to open Adobe Reader file from another native IOS application?
Basically, we just want to use a custom URL scheme to open a specific document in the App. Currently, this only opens the app but does not load the file.
APB

Not to hijack the conversation but I can explain why this would be useful for both the above case and another.
What I believe Pavel is talking about is setting up a "URL Scheme" for the Adobe Acrobat iOS application so that you can easily open a PDF specifically in Adobe Acrobat iOS from other native applications and even from web applications opened within Safari. This is particularly useful if your application requires some of the specific features in Adobe Reader iOS to grant them the best experience possible and you want to encourage this.
Another case: If you're using Adobe Livecycle's document security modules (that encrypts PDF files so that Adobe Acrobat must "phone home" to decrypt and view the document), these PDF's can only be viewed inside the Adobe Acrobat application and appear as blank in most other PDF readers. Having a URL scheme allows your application utilising this functionality to have a 1 click step to view the PDF rather than the current non-user friendly process:
- Within Safari, touch the PDF link (appears as blank in the default Safari PDF reader, which in itself is confusing)
- Touch "Open in..."
- Touch "Adobe Acrobat"
We have an immediate need for this functionality for the example above. I can resubmit it in a separate post if necessary.

Best way To get data from another application using NDDE lbrary

My vb.net application gets data from another application using NDDE Library. I got stocks prices (open,high,low,close,volume,change......(about 15 records for each stock)) (about 200 stocks) . I don't know if there is a problem in my code.
This is my code:
l : is the list of stocks.
This Sub connects to server and requests the data :
Public Shared Sub GetQuotes()
Try
client1 = New DdeClient(server, topic)
client1.Connect()
For i As Integer = 0 To l.Count - 1
client1.StartAdvise("QO." & l(i).t & ".TAD$last", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$open", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$high", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$low", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$pclose", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$volume", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$date", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$time", 1, True, 60000)
Next
Catch ex As Exception
MsgBox(ex.Message)
End Try
End Sub
and then I get the data from Client_advise sub (called each time a value changed )and fill the list. What I know is that client advise gets only one record for single stock each time is called..
Example: for stock AAPL. 1st time enters client_Advise I get open price for AAPL, 2nd time I get high price for AAPL,3rd time I get low price..... and I update the value in the List (l)
This the client_Advise Sub:
Private Shared Sub client1_Advise(ByVal sender As Object, ByVal e As NDde.Client.DdeAdviseEventArgs) Handles client1.Advise
For q As Integer = 0 To l.Count - 1
If l(q).t = w(1) Then
Dim item() As String = e.Item.Split("$")
If l(q).Open = "#" Then
l(q).Open = "0"
End If
If l(q).hi = "#" Then
l(q).hi = "0"
End If
If l(q).lo = "#" Then
l(q).lo = "0"
End If
If l(q).Close = "" Or l(q).Close = "#" Then
l(q).Close = "0"
End If
If l(q).pclose = "#" Then
l(q).pclose = "0"
End If
If item(1) = "open" Then
l(q).Open = Format(Val(e.Text), "0.00")
ElseIf item(1) = "last" Then
l(q).Close = Format(Val(e.Text), "0.00")
ElseIf item(1) = "high" Then
l(q).hi = Format(Val(e.Text), "0.00")
ElseIf item(1) = "volume" Then
l(q).Volume = Val(e.Text)
ElseIf item(1) = "low" Then
l(q).lo = Format(Val(e.Text), "0.00")
ElseIf item(1) = "pclose" Then
l(q).pclose = Format(Val(e.Text), "0.00")
If l(q).pclose <> "" And l(q).pclose <> "#" And l(q).Close <> "" And l(q).Close <> "#" Then
l(q).c = Format(l(q).Close - l(q).pclose, "0.00")
l(q).cp = Format(((l(q).Close - l(q).pclose) / l(q).pclose) * 100, "0.00")
End If
l(q).flag1 = 2
ElseIf item(1) = "date" Then
l(q).Date1 = e.Text
ElseIf item(1) = "time" Then
l(q).Time = e.Text
End If
Exit For
End If
Next
End Sub
Am I doing something wrong which inreases CPU usage to 80 or 90 % ?
Thanks in advance.

Hi MikeHammadi,
According to your description, you'd like to get data from another app using NDDE library.
When using the NDDE library, the CPU usage is high. As the NDDE library is third-party library, it is not supported here. I suggest you checking if the problem is caused by the NDDE library.
If you'd like to get data from another app. I suggest you could save the data in the dataBase, and then read it in another application if necessary.
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Canother when them from another application eg imovie? 150 files but only 30 show.

Aperture 3 help please. Can anyone tell me why I lose photos from files when trying to access them from another application eg imovie? file may have 80 photos but only 20 might be seen in application.

Can anyone tell me why I lose photos from files
Do you mean from folders, albums, or projects?
How do you access your Aperure images from other applications? Do you show Aperture in the Media Brower?
Then you need to ensure that Aperture renders previews for all images you want to access externally. Check your settings in the Aperture Preferences -> Previews and enable "Share Previews ..." and "New Projects automatically generate Previews". If reviews are missing for older imports select the images, ctrl click and "Update Preview".
Regards
Léonie

Error while trying to copy template from another application

Hi,
I am getting this error while trying to copy template from another application:
report error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
This report is located here:
Home-Application Builder-Application 150-Shared Components-Templates-Replace Templates
best regards,

It is usually a permissions issue.. you have read but not write permission. Why it would suddenly change is one of those Apple Mysteries... but it happens.
Open the directory (folder) where your media files are.. and check the permissions.. see if you can fix them.
The problem is the folder on the TC might have lost your ownership and you might not be able to change it.. Apple do not provide anyway to regain permissions because you would need low level access to the TC firmware.
I would just as a matter of course reset the TC to factory and redo its setup.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Do the setup via airport utility using different names.. short, no spaces and pure alphanumerics. Make sure passwords are also pure alphanumeric mixed case and numbers.. 8-20 characters is usually plenty.
Mount the disk in finder and see if you have the same issue.. I am not expecting a change.. but it is worth a try.
No luck you can copy your files off the TC.. wipe it .. and then copy them back.. no bad thing unless you already have a backup of your files at the moment. In which case you can just wipe the TC and copy the files now.

Unable to delete data files from my Ipod if used as data storage...

Hello everybody
I bought months ago an Ipod Nano 8GB. I've got an issue when i use it as disk storage i'm not able to sort out. I've checked all the topics but i cannot find any solution.
Example: I use the Ipod with the option "Manually manage music and videos". I put audio and video files on my Ipod through Itunes, then i put also some files on my Ipod as normal data files through my Mac Finder (Easy, i drag VLC, JPG files etc. from folders to my Ipod). The Ipod/Itunes summary page shows (Correctly) the capacity column colored in blue (Audio), video (Purple) and orange (Data). No probs when i transfer data files to another computer.
Problem: when i delete the data files from my Ipod (Through finder) the orange column doesn't disappear (I have no problems if i delete audio/video files via Itunes) and although i've actually deleted all the files if i try to add some other data or videos/music files to my Ipod, Itunes says that there is no space available in my device. It's very strange, i check and double check all the options but eventually i have to restore my Ipod all the times and (Pretty annoying) add all my files again.
It seems that although i sent my files to the trash bin, Itunes (Fully updated) doesn't recognize the change.
It'd be great if someone can help me out as it's very important for me to be able to use my Ipod as disk storage, thanks a lot!

It seems that although i sent my files to the trash bin, Itunes (Fully updated) doesn't recognize the change.
Empty it from the Finder menu or by control-clicking it in the Dock.
(44613)

File from the Application server

Hi gurus,
I am working on a scenario where I need to get a file from the application server and for this I need to ask user to enter the location and that too at the selection screen and then I need to read this location using open data set and read data set in my program , once I am done with this I need to do some other validations. so can you please help me out how to achieve this.
Thanks
Rajeev Gupta

Hi
Declare the selection screen with file as parameter so that the user enter the application server file..
the use the OPEND DATASET as mentioned in below code and process
Refer this:
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures.
*& Report ZUPLOADTAB                                                  *                     &----
*& Example of Uploading tab delimited file                             *
REPORT zuploadtab                    .
PARAMETERS: p_infile LIKE rlgrap-filename
                        OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
    name1 like pa0002-VORNA,
    name2 like pa0002-name2,
    age   type i,
    END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
      wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
    CLEAR: wa_string, wa_uploadtxt.
    READ DATASET ld_file INTO wa_string.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                      wa_uploadtxt-name2
                                      wa_uploadtxt-age.
      MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
      APPEND wa_upload TO it_record.
    ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
    write:/     sy-vline,
           (10) wa_record-name1, sy-vline,
           (10) wa_record-name2, sy-vline,
           (10) wa_record-age, sy-vline.
endloop.
Regards
Anji

Upload tab-delimited file from the application server to an internal table

Hello SAPients.
I'm using OPEN DATASET..., READ DATASET..., CLOSE DATASET to upload a file from the application server (SunOS). I'm working with SAP 4.6C. I'm trying to upload a tab-delimited file to an internal table but when I try load it the fields are not correctly separated, in fact, they are all misplaced and the table shows '#' where supposedly there was a tab.
I tried to SPLIT the line using as separator a variable with reference to CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB but for some reason that class doesn't exist in my system.
Do you know what I'm doing wrong? or Do you know a better method to upload a tab-delimited file into an internal table?
Thank you in advance for your help.

Try:
REPORT ztest MESSAGE-ID 00.
PARAMETER: p_file LIKE rlgrap-filename   OBLIGATORY.
DATA: BEGIN OF data_tab OCCURS 0,
      data(4096),
      END   OF data_tab.
DATA: BEGIN OF vendor_file_x OCCURS 0.
* LFA1 Data
DATA: mandt LIKE bgr00-mandt,
      lifnr LIKE blf00-lifnr,
      anred LIKE blfa1-anred,
      bahns LIKE blfa1-bahns,
      bbbnr LIKE blfa1-bbbnr,
      bbsnr LIKE blfa1-bbsnr,
      begru LIKE blfa1-begru,
      brsch LIKE blfa1-brsch,
      bubkz LIKE blfa1-bubkz,
      datlt LIKE blfa1-datlt,
      dtams LIKE blfa1-dtams,
      dtaws LIKE blfa1-dtaws,
      erdat LIKE lfa1-erdat,
      ernam LIKE lfa1-ernam,
      esrnr LIKE blfa1-esrnr,
      konzs LIKE blfa1-konzs,
      ktokk LIKE lfa1-ktokk,
      kunnr LIKE blfa1-kunnr,
      land1 LIKE blfa1-land1,
      lnrza LIKE blfa1-lnrza,
      loevm LIKE blfa1-loevm,
      name1 LIKE blfa1-name1,
      name2 LIKE blfa1-name2,
      name3 LIKE blfa1-name3,
      name4 LIKE blfa1-name4,
      ort01 LIKE blfa1-ort01,
      ort02 LIKE blfa1-ort02,
      pfach LIKE blfa1-pfach,
      pstl2 LIKE blfa1-pstl2,
      pstlz LIKE blfa1-pstlz,
      regio LIKE blfa1-regio,
      sortl LIKE blfa1-sortl,
      sperr LIKE blfa1-sperr,
      sperm LIKE blfa1-sperm,
      spras LIKE blfa1-spras,
      stcd1 LIKE blfa1-stcd1,
      stcd2 LIKE blfa1-stcd2,
      stkza LIKE blfa1-stkza,
      stkzu LIKE blfa1-stkzu,
      stras LIKE blfa1-stras,
      telbx LIKE blfa1-telbx,
      telf1 LIKE blfa1-telf1,
      telf2 LIKE blfa1-telf2,
      telfx LIKE blfa1-telfx,
      teltx LIKE blfa1-teltx,
      telx1 LIKE blfa1-telx1,
      xcpdk LIKE lfa1-xcpdk,
      xzemp LIKE blfa1-xzemp,
      vbund LIKE blfa1-vbund,
      fiskn LIKE blfa1-fiskn,
      stceg LIKE blfa1-stceg,
      stkzn LIKE blfa1-stkzn,
      sperq LIKE blfa1-sperq,
      adrnr LIKE lfa1-adrnr,
      mcod1 LIKE lfa1-mcod1,
      mcod2 LIKE lfa1-mcod2,
      mcod3 LIKE lfa1-mcod3,
      gbort LIKE blfa1-gbort,
      gbdat LIKE blfa1-gbdat,
      sexkz LIKE blfa1-sexkz,
      kraus LIKE blfa1-kraus,
      revdb LIKE blfa1-revdb,
      qssys LIKE blfa1-qssys,
      ktock LIKE blfa1-ktock,
      pfort LIKE blfa1-pfort,
      werks LIKE blfa1-werks,
      ltsna LIKE blfa1-ltsna,
      werkr LIKE blfa1-werkr,
      plkal LIKE lfa1-plkal,
      duefl LIKE lfa1-duefl,
      txjcd LIKE blfa1-txjcd,
      sperz LIKE lfa1-sperz,
      scacd LIKE blfa1-scacd,
      sfrgr LIKE blfa1-sfrgr,
      lzone LIKE blfa1-lzone,
      xlfza LIKE lfa1-xlfza,
      dlgrp LIKE blfa1-dlgrp,
      fityp LIKE blfa1-fityp,
      stcdt LIKE blfa1-stcdt,
      regss LIKE blfa1-regss,
      actss LIKE blfa1-actss,
      stcd3 LIKE blfa1-stcd3,
      stcd4 LIKE blfa1-stcd4,
      ipisp LIKE blfa1-ipisp,
      taxbs LIKE blfa1-taxbs,
      profs LIKE blfa1-profs,
      stgdl LIKE blfa1-stgdl,
      emnfr LIKE blfa1-emnfr,
      lfurl LIKE blfa1-lfurl,
      j_1kfrepre LIKE blfa1-j_1kfrepre,
      j_1kftbus   LIKE blfa1-j_1kftbus,
      j_1kftind   LIKE blfa1-j_1kftind,
      confs LIKE lfa1-confs,
      updat LIKE lfa1-updat,
      uptim LIKE lfa1-uptim,
      nodel LIKE blfa1-nodel.
DATA: END   OF vendor_file_x.
FIELD-SYMBOLS: <field>,
                <field_1>.
DATA: delim          TYPE x        VALUE '09'.
DATA: fld_chk(4096),
      last_char,
      quote_1     TYPE i,
      quote_2     TYPE i,
      fld_lth     TYPE i,
      columns     TYPE i,
      field_end   TYPE i,
      outp_rec    TYPE i,
      extras(3)   TYPE c        VALUE '.,"',
      mixed_no(14) TYPE c        VALUE '1234567890-.,"'.
OPEN DATASET p_file FOR INPUT.
DO.
READ DATASET p_file INTO data_tab-data.
IF sy-subrc = 0.
    APPEND data_tab.
ELSE.
    EXIT.
ENDIF.
ENDDO.
* count columns in output structure
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
columns = sy-index.
ENDDO.
* Assign elements of input file to internal table
CLEAR vendor_file_x.
IF columns > 0.
LOOP AT data_tab.
    DO columns TIMES.
      ASSIGN space TO <field>.
      ASSIGN space TO <field_1>.
      ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
      SEARCH data_tab-data FOR delim.
      IF sy-fdpos > 0.
        field_end = sy-fdpos + 1.
        ASSIGN data_tab-data(sy-fdpos) TO <field_1>.
* Check that numeric fields don't contain any embedded " or ,
        IF <field_1> CO mixed_no AND
           <field_1> CA extras.
          TRANSLATE <field_1> USING '" , '.
          CONDENSE <field_1> NO-GAPS.
        ENDIF.
* If first and last characters are '"', remove both.
        fld_chk = <field_1>.
        IF NOT fld_chk IS INITIAL.
          fld_lth = strlen( fld_chk ) - 1.
          MOVE fld_chk+fld_lth(1) TO last_char.
          IF fld_chk(1) = '"' AND
             last_char = '"'.
            MOVE space TO fld_chk+fld_lth(1).
            SHIFT fld_chk.
            MOVE fld_chk TO <field_1>.
          ENDIF.       " for if fld_chk(1)=" & last_char="
        ENDIF.         " for if not fld_chk is initial
* Replace "" with "
        DO.
          IF fld_chk CS '""'.
            quote_1 = sy-fdpos.
            quote_2 = sy-fdpos + 1.
            MOVE fld_chk+quote_2 TO fld_chk+quote_1.
          ELSE.
            MOVE fld_chk TO <field_1>.
            EXIT.
          ENDIF.
        ENDDO.
        <field> = <field_1>.
      ELSE.
        field_end = 1.
      ENDIF.
      SHIFT data_tab-data LEFT BY field_end PLACES.
    ENDDO.
    APPEND vendor_file_x.
    CLEAR vendor_file_x.
ENDLOOP.
ENDIF.
CLEAR   data_tab.
REFRESH data_tab.
FREE    data_tab.
Rob

Using Migration Assistant to Move Data Files from one Account to New User

Is it possible or recommended to use Migration Assistant to move data files from an old user account to a new user account on the same volume/hard disk?

Migration Assitant cannot be used as a simple file transfer utility. MA can transfer an entire Home folder or entire Users folder but not individual files.
In general files in one user account cannot be moved to another user account as this would violate built-in security measures.
What you can do is to copy the files to an external device like a hard drive or flash drive. First log in to the old account. Then configure the drive to ignore preferences by Pressing COMMAND-I to open the Get Info window and check the Ignore permissions on this volume checkbox at the bottom of the window. Copy your files to the device. Log into the new account. Verify the external drive is still configured to ignore permissions (reset it, if not.) Copy the files from the external device into the Home folder of the new account. I would create a temporary folder for these files. If you still end up without the proper permissions you will need to make modifications that are easier done if all the files are in a single folder.

How to embed and launch ipa file from another ipa package created using Air for iOS

Hi Guys,
Anybody out there knowing how to embed and launch ipa file from another ipa package created using Air for iOS ?
I am having 1 ipa file created using Xcode, Now i need to include that file in my ipa Package which is created using Flash CS 5.5 and Air for iOS. Also i need to know how to open my 1st ipa file from AS3 ?
Thanks,

Hi Sir,
Thanks for your reply.
But in that case user need to download 2 applications right. I need user to download my parent application created using Flash and that package contain one more ipa created using Xcode, so from my parent app only user should able to open my 2nd app. Is there any way to do that?
Ps: I am not talking about in-app but 2 individual apps inside one package.

Monitoring EJB from another application

Hi!
Let's say: We have some EJB deployed of Application Server. Each EJB (doesn't metter if session or entity) has its methods that can be called. (All EJB are in the same application)
Can I from another application see what methods has been called and at what time? I can extend monitored application with its log files, but want to use application to be monitored as is.
I guess it depends on Application Server functionality. I would like to do it on SUN reference implementation (from J2EE SDK). If there is another App Server (the best free one) please note.
I would be very thankfull for any answer.
Marcin

You could use the opensource EJB-container JBOSS and modify the source to perform logging of when a particular method was called etc.
This will enable you to run the application as is with no modifications.
Morten.

Calling a bounded task flow (that uses fragments) from another application

Hello,
I'm currently having difficulties calling a task flow located inside another application.
I have application Console which is my main application in which I would like to run other applications within. Inside this Console I have it divided into splitter windows and inside them I have regions. My goal is to be able to call a task flow from another application inside one of these regions but so far I'm having no luck.
My first problem occurred when I created a 'local' task flow to make a call to another application's task flow. When I set the properties to the task flow call, it gave me an error that it could not find the .XML file for that task flow when I ran the Console application. I then proceeded to copy that .XML from the remote application into the Console's WEB-INF directory and I seemed to get a bit farther. The error I get now is saying that I cannot run a task-flow that uses fragments. It's essentially trying to run that task flow as an entirely new page instead of inside the region that it's bound to. It's NOT a dynamic region (although that's the end goal here). So I then changed the other application's task flow to simply display an entire page rather than fragments inside a region and voila, it works..... kind of.
To recap how I was able to call another application's task flow inside the Console:
- I had to manually copy the task flow xml file into the Console WEB-INF directory
- I had to change the task flow so that it didn't use fragments
- I have called the task flow but I lose my console page entirely, no more regions or splitters so I'm back to square one.
If anybody has any suggestions, hints, tips or anything, send them this way and I will be forever greateful.
Thanks,
Mark

Thanks for your response Frank.
Unfortunately the problem seems to be greater than that. I've been able to package task-flows into a jar library and tried importing them that way with no luck.
I'm simple trying to call an external task-flow to run inside a region which is inside a splitter panel that I call my console.
Any other ideas ?

How to call Oracle form .from another application like VB 6.0

Dear ALL,
I want to call oracle(Developer) form ,from another application (VB 6.0).I want to call the form in such
a way that user dont need to enter login and password.I will hard code the username and password
in my VB 6.0 application.User only press a button on Visual Basic 6.0 form and and that button will
open required Orcale form.How can I DO this.PLEASE HELP............
Regards

You have the command in VB 6.0 to run any exe files right (I think it is the system command). Next to that command place the following code to run your forms application
ifrun60.EXE <forms.fmx with complete path> userid=<username>/<password>@<connection string>.
Regards,
Senthil .A. Perumal.

ORA-01173: data dictionary indicates missing data file from system tablespa

Hello
My Database is 11gR1 and Linux is the OS. Thought of posting it as a new thread as things have changed a lot.
2 of my database file were lost due to hardware failure. (the datafile do not belong to SYSTEM TABLESPACE) and and the second was datafile for undo tablespace.
I created control files with command not mentioning the lost datafiles:
CREATE CONTROLFILE REUSE DATABASE "BSSGLB" NORESETLOGS NOARCHIVELOG
MAXLOGFILES 32
MAXLOGMEMBERS 5
MAXDATAFILES 600
MAXINSTANCES 10
MAXLOGHISTORY 1168
LOGFILE
GROUP 1 '/DB/app/oracle/oradata/bssglb/redo01.log' SIZE 500M,
GROUP 2 '/DB/app/oracle/oradata/bssglb/redo02.log' SIZE 500M,
GROUP 3 '/DB/app/oracle/oradata/bssglb/redo03.log' SIZE 500M
-- STANDBY LOGFILE
DATAFILE
'/DB/app/oracle/oradata/bssglb/system01.dbf',
'/DB/app/oracle/oradata/bssglb/sysaux01.dbf',
'/DB/app/oracle/oradata/bssglb/users01.dbf',
'/DB/app/oracle/oradata/bssglb/bss01.dbf',
'/var/oracle/oradata/bssglb/bss02',
'/var/oracle/oradata/bssglb/system02.dbf'
CHARACTER SET US7ASCII
I have all the files mentioned in the datafile section of the above command.
But somehow when i try to open the DB, first it asks for the media recover. When i recover database then it disconnects database saying:
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
Process ID: 4768
Session ID: 170 Serial number: 5
Contents of the alert log file are:
Beginning crash recovery of 1 threads
parallel recovery started with 3 processes
Started redo scan
Completed redo scan
1 redo blocks read, 0 data blocks need recovery
Started redo application at
Thread 1: logseq 7, block 2, scn 20356182450
Recovery of Online Redo Log: Thread 1 Group 1 Seq 7 Reading mem 0
Mem# 0: /DB/app/oracle/oradata/bssglb/redo01.log
Completed redo application
Completed crash recovery at
Thread 1: logseq 7, block 3, scn 20356202453
0 data blocks read, 0 data blocks written, 1 redo blocks read
Sun Feb 20 08:16:23 2011
Thread 1 advanced to log sequence 8
Thread 1 opened at log sequence 8
Current log# 2 seq# 8 mem# 0: /DB/app/oracle/oradata/bssglb/redo02.log
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Sun Feb 20 08:16:23 2011
SMON: enabling cache recovery
Errors in file /Oracle/app/oracle/diag/rdbms/bssglb/bssglb/trace/bssglb_ora_4550.trc:
ORA-01173: data dictionary indicates missing data file from system tablespace
Error 1173 happened during db open, shutting down database
USER (ospid: 4550): terminating the instance due to error 1173
Sun Feb 20 08:16:25 2011
Instance terminated by USER, pid = 4550
ORA-1092 signalled during: alter database open...
ORA-1092 : opiodr aborting process unknown ospid (4550_182910338848)
Sun Feb 20 08:16:26 2011
ORA-1092 : opitsk aborting process
Guys please help me out of this situation.
Regards, Imran

STOP opening new threads for ongoing solution to SAME problem
Re: I have copy of data files! How to install and add these files to database!
Re: Failure of network storage!
Re: I have copy of data files! How to install and add these files to database!
Handle:      misterimran
Email:      misterimran
Status Level:      Newbie
Registered:      Jan 15, 2002
Total Posts:      1,109
Total Questions:      130 (115 unresolved)
so many questions & so few answers!
Edited by: sb92075 on Feb 19, 2011 7:49 PM

Waiting data file from another application

Similar Messages

Maybe you are looking for