Wanna Send email thru Adobe form...using tcode VA41

Hi Experts,
My issue is
I have created an Adobe form.
Now I want to send this form thru email ...
This adobe form has to be generated using tcode VA41 which is then attached and emailed to customer.
How do i do that...
Can anyone help in sorting out this issue....
Regards,
Vijaya
Edited by: Vijaya B on Jul 16, 2009 3:57 PM

Hi,
Code a prog. to generate emails and find the user exit using tc : smod , cmod where the adobe form is been triggered in the Trasaction.
Regards,
kumar.

Similar Messages

SAP screen frozen once in a while after sending email from adobe form

Hi Experts,
I am facing weird problems.
I am using ABAP program to generate a adobe form.
While testing, once in a while, after we clicked on the email icon on the adobe form, and then email sent out, we got frozen SAP screen. Sometimes, we need to hit keyboard: "ESC"/ "F3" to go back to SAP selection screen.
Did you have this problem before? Please kindly advise.
I am using Adobe Reader X 10, SAP GUI 710 patch 18.
Thanks.
Tee

Hi Experts,
I am facing weird problems.
I am using ABAP program to generate a adobe form.
While testing, once in a while, after we clicked on the email icon on the adobe form, and then email sent out, we got frozen SAP screen. Sometimes, we need to hit keyboard: "ESC"/ "F3" to go back to SAP selection screen.
Did you have this problem before? Please kindly advise.
I am using Adobe Reader X 10, SAP GUI 710 patch 18.
Thanks.
Tee

Can any one please send me study material on ADOBE forms (used in SAP)

Can any one please send me study material on ADOBE forms (used in SAP).

Hi,
http://wwwimages.adobe.com/www.adobe.com/enterprise/partners/pdfs/bwp_interactive_forms_adobe.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4132
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken]
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/4adf7ba13c4ac1b4600d4df15f8b84/frameset.htm

Send email to multiple users using form

I am using following code to send email from forms.
But i want to send email to multiple users like atleast 10 users
It i sworking for one user.
If i give mail_pkg.send('tim@'oracle.com;[email protected]','Testing Oracle forms to send email','Testing oracle forms to send email','c:/x.pdf');
The email is not going
Can anybody help how to send to multiple users
Thanks for your help
T
PACKAGE Mail_pkg IS
session OLE2.OBJ_TYPE; /* OLE object handle */
args OLE2.LIST_TYPE; /* handle to OLE argument list */
procedure logon( Profile IN varchar2 default NULL );
procedure logoff;
procedure send( Recp IN varchar2,
Subject IN varchar2,
Text IN varchar2,
Attch IN varchar2
END;

As said,
Reports9i is better than Reports6i as far as sending emails is concerned. Reports9i allows you to send Reports in different formats as email attachements (PDF v3 is only one option). You can set subject, cc, bcc and some body text the way you want it. The Reports server only needs the address of a SMTP Server and you are ready to go. In Reports6i this is a bit more limited as you are not able to provide your own subject and body texts.
I know that you can do this with PL/SQL from teh databae, but never tried it before.
There is another option, which is to use a Java Bean in Forms for email. Thsi only works on the Web and a demo is included in teh Forms9i demos that can be downloaded from OTN. Though the demo is written for Forms9i it should work with Forms6i as well (not the Forms demo files because they are created in Forms9i).
Fran

ADOBE FORMS using Webservice

Hi Experts,
I have a problem with Adobe Forms Using webservice. I created RFC where it saves data from Adobe Forms to a customized table and exposed it as webservice. From the SOA manager, I copied the generated link pasted in the dataconnection in Adobe Lifecycle designer, but whenever I generate the form I keep receiving this error:
"http:// erpwrk1.corp.com:8000/sap/bc/srt/wsdl/bndg_DFA46DE60CFOD33F19F21005056C00008/wsdl11/allinone/ws_policy/document?sap-client=001". Check that the path is correct and that the file is a valid wsdl file.
I already activated services from SICF in relation SOAP runtime. What could be the cause of the problem and how to fix the problem?
Thanks A Lot!
Mae

Hi Ma. Angelica A. Estacio,
From the SOA manager, I copied the generated link pasted in the dataconnection in Adobe Lifecycle designer, but whenever I generate the form I keep receiving this error: Check that the path is correct and that the file is a valid wsdl file and hence i cannot finish the data connection wizard.
From the above posts, it looks like you have resolved the issue. But can you please let me know how did you resolve it ?
Did you check any SAP transaction to find the above mentioned checkbox?
Please revert as this has become critical now.
You can mail me your response on [email protected]
Regards,
Rohit Gugale

Outlook 2013 crashed when user sending email from Adobe Writer xi pro ver 11.0.07

I ask Adobe, but they are signaling to Outlook problem
PC-HP, Windows 8.1 Pro X64 connected to Windows 2008 R2 DC
Adobe Acrobat Pro ver 11,x
When user trying to send email from Adobe direct, Outlook 2013 Pro is crashing
The only way to send email is to save adobe ( PDF) file and attached to the email
All patches are installed

Log Name: Application
Source: Application Error
Date: 7/15/2014 8:05:38 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Liz7PM-HP.armadale.local
Description:
Faulting application name: Acrobat.exe, version: 11.0.7.79, time stamp: 0x536b812b
Faulting module name: SendMail.api, version: 11.0.7.79, time stamp: 0x536b7fd0
Exception code: 0xc0000005
Fault offset: 0x0003390b
Faulting process id: 0x139c
Faulting application start time: 0x01cfa024deec4218
Faulting application path: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
Faulting module path: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\SendMail.api
Report Id: 553a89c7-0c18-11e4-be97-80c16ee27020
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-07-15T12:05:38.000000000Z" />
<EventRecordID>66128</EventRecordID>
<Channel>Application</Channel>
<Computer>Liz7PM-HP.armadale.local</Computer>
<Security />
</System>
<EventData>
<Data>Acrobat.exe</Data>
<Data>11.0.7.79</Data>
<Data>536b812b</Data>
<Data>SendMail.api</Data>
<Data>11.0.7.79</Data>
<Data>536b7fd0</Data>
<Data>c0000005</Data>
<Data>0003390b</Data>
<Data>139c</Data>
<Data>01cfa024deec4218</Data>
<Data>C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe</Data>
<Data>C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\SendMail.api</Data>
<Data>553a89c7-0c18-11e4-be97-80c16ee27020</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Log Name: Application
Source: Windows Error Reporting
Date: 7/15/2014 8:05:55 AM
Event ID: 1001
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: Liz7PM-HP.armadale.local
Description:
Fault bucket 73304412188, type 1
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: Acrobat.exe
P2: 11.0.7.79
P3: 536b812b
P4: SendMail.api
P5: 11.0.7.79
P6: 536b7fd0
P7: c0000005
P8: 0003390b
P9:
P10:
Attached files:
C:\Users\ewhitton\Desktop\140.pdf
C:\Users\ewhitton\AppData\Local\Temp\WER8000.tmp.WERInternalMetadata.xml
C:\Users\ewhitton\AppData\Local\Temp\WER8BB9.tmp.appcompat.txt
minidump.mdmp
These files may be available here:
C:\Users\ewhitton\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Acrobat.exe_2a26ba191a528da71b85271ed9509f7e426babf8_0d6f35c4_1735c074
Analysis symbol:
Rechecking for solution: 0
Report Id: 553a89c7-0c18-11e4-be97-80c16ee27020
Report Status: 4104
Hashed bucket: f6a7a946597169e4aea5077b3b7f0848
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-07-15T12:05:55.000000000Z" />
<EventRecordID>66131</EventRecordID>
<Channel>Application</Channel>
<Computer>Liz7PM-HP.armadale.local</Computer>
<Security />
</System>
<EventData>
<Data>73304412188</Data>
<Data>1</Data>
<Data>APPCRASH</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>Acrobat.exe</Data>
<Data>11.0.7.79</Data>
<Data>536b812b</Data>
<Data>SendMail.api</Data>
<Data>11.0.7.79</Data>
<Data>536b7fd0</Data>
<Data>c0000005</Data>
<Data>0003390b</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
C:\Users\ewhitton\Desktop\140.pdf
C:\Users\ewhitton\AppData\Local\Temp\WER8000.tmp.WERInternalMetadata.xml
C:\Users\ewhitton\AppData\Local\Temp\WER8BB9.tmp.appcompat.txt
minidump.mdmp</Data>
<Data>C:\Users\ewhitton\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Acrobat.exe_2a26ba191a528da71b85271ed9509f7e426babf8_0d6f35c4_1735c074</Data>
<Data>
</Data>
<Data>0</Data>
<Data>553a89c7-0c18-11e4-be97-80c16ee27020</Data>
<Data>4104</Data>
<Data>f6a7a946597169e4aea5077b3b7f0848</Data>
</EventData>
</Event>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Log Name: Application
Source: Outlook
Date: 7/15/2014 8:06:05 AM
Event ID: 50
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: Liz7PM-HP.armadale.local
Description:
The following providers do not implement fast shutdown APIs, but are being shut down using fast shutdown:
MDConnector.dll (MAPI Store Provider)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Outlook" />
<EventID Qualifiers="16384">50</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-07-15T12:06:05.000000000Z" />
<EventRecordID>66132</EventRecordID>
<Channel>Application</Channel>
<Computer>Liz7PM-HP.armadale.local</Computer>
<Security />
</System>
<EventData>
<Data>MDConnector.dll (MAPI Store Provider)
</Data>
</EventData>
</Event>

Interactive Adobe Forms using WebDynpro ABAP

Hi,
I could able to design and execute my interactive adobe form using webdynpro ABAP. Here what i am doing is i am creating context with my structures and table types and pdfobject of type xstring and passing the proper inputs in interactive form properties, in template sources i am provinding the interface and form name of my own choice and it is getting created automatically by the system, every thing works fine here and i could able to execute my form from web dynpro application.
Here my requirement is i have already created structures and table types after that i went to transaction SFP and created an interace and by using that interface i have created form and i have designed the layout. Now what i want to do is i want to integrate this form in my webdynpro appliction and i want to execute it from webdynpro applicaton. When i try to do i am getting short dump, is my approach feasible or not . kindly suggest. If we can achieve this what is the way to achieve.
Please do send your suggestions.
Regards,
Venkat

Hi
When u click on button..u will have to get the data from node which is existing on the Intereactive form and pass it to other view via writing logic in button event handler.
The data can be displayed in other view as result.
I hope u got it.
Provide REWARD points..:-)

Send faqs regarding Adobe Forms? please

please send any useful information on ADOBE FORMS FAQS

Hi,
look at the Adobe page here in SDN:
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=AdobeForms.htm
Check these links on Adobe forms
http://help.sap.com/saphelp_nw04/helpdata/en/1e/05853ff8ec2c17e10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/solutions/solutionextensions/pdf/BWP_Interactive_Forms_Adobe.pdf
It contains lots of useful information, documentation, and e-learning materials teaching you the basics.
chk these links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4132
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken]
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
Regards,
Satish

How do I send email with pictures attached, using PSE 9 and Windows 7 ?

How do I send email with pictures attached, using PSE 9 and Windows 7 ?

Try email attachment workflow in Organizer. http://tv.adobe.com/watch/learn-photoshop-elements-9/sharing-your-images-via-email/
Thanks
Andaleeb

How to send email thru generic email ID?

I am sending payment advice as PDF email attachment. But it is going from the person's personal email ID who runs the remittance procedure but we don't want his email ID to come into picture. Is there any way we can send email thru a generic email address?

Hi sheel,
or consider the modern way, use cl_sapuser_bcs=>create for the sender you want, check my favorite
[Unknown thus unloved?|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417600%29ID0244690950DB11730526581933624871End?blog=/pub/wlg/3443]
Regards,
Clemens

I'm having problems receiving/sending emails thru Outlook.

I switched internet connection from AT&T to Comcast and I'm still utilized several AT&T email address's for free. I'm having problems receiving/sending emails thru Outlook. Could the problem be due to using their free emails with no support.
Do I have to go thru yahoo to read/send emails?

Change the ISP would not effect the email connection generally. (Only when ISP disable your mailbox which they could control directly.)
I suppose that your Outlook still store/cache the AT&T messages, try to export them as PST data file for backup.
Setup the new Yahoo in your current Outlook first and then import that backup.pst to continue to use.
http://support.microsoft.com/kb/287070/en-us
Thanks
Tony Chen
TechNet Community Support

Sending email to multiple address using Utl_Smtp

Hi,
I want to send email to multiple address using the Utl_Smtp feature.
When I am sending email to one email address in the To:Field it works fine.However, when I send
to multiple address I am getting the below error.I am using a table(Email_test) to store all email id.
Error report:
ORA-29279: SMTP permanent error: 501 5.1.3 Invalid address
ORA-06512: at "SYS.UTL_SMTP", line 20
ORA-06512: at "SYS.UTL_SMTP", line 98
ORA-06512: at "SYS.UTL_SMTP", line 240
ORA-06512: at line 48
29279. 00000 - "SMTP permanent error: %s"
*Cause:    A SMTP permanent error occurred.
*Action:   Correct the error and retry the SMTP operation.
I am trying two options both ways I am getting error
Option 1:
Selecting two email id indivually in the select query as below
select email into v_Recipient1 from Email_test where Key_name='U1';
select email into v_Recipient2 from Email_test where Key_name='U2';
v_Recipient := v_Recipient1||';'||v_Recipient2;
Option 2:
Is there a way to use option
select email into v_Recipient1 from Email_test where Key_name='U4';
===========================================================
Create table Script
===========================================================
create table Email_test (Email varchar2(100),Key_name varchar2(10));
insert into Email_test values ('[email protected]','U1');
insert into Email_test values ('[email protected]','U2');
insert into Email_test values ('[email protected]','U3')
insert into Email_test values ('[email protected];[email protected];[email protected]','U4');
select * from Email_test
[email protected]                         U1
[email protected]                         U2
[email protected]                         U3
[email protected];[email protected];[email protected]     U4
select * from Email_test where Key_name in ('U1','U2','U3')
[email protected]     U1
[email protected]     U2
[email protected]     U3
select * from Email_test where Key_name='U4'
[email protected];[email protected];[email protected]
=======================================================
PL/SQL Block
===========================================================
declare
v_From VARCHAR2(80) := '[email protected]';
v_cc VARCHAR2(80);
v_Recipient VARCHAR2(80) ;
v_Recipient1 VARCHAR2(80) ;
v_Recipient2 VARCHAR2(80) ;
v_Subject VARCHAR2(80);
v_Mail_Host VARCHAR2(50);
v_Mail_Conn utl_smtp.Connection;
crlf VARCHAR2(2) := chr(13)||chr(10);
begin
--Mail Host name
select VALUE into v_Mail_Host from Server_info where server_name = 'SMTPServer';
select email into v_Recipient1 from Email_test where Key_name='U1';
select email into v_Recipient2 from Email_test where Key_name='U2';
v_Recipient := v_Recipient1||';'||v_Recipient2;
--for CC
select email into v_cc from Email_test where Key_name='U3';
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Rcpt(v_Mail_Conn, v_cc); -- To CC recepient
utl_smtp.Rcpt(v_Mail_Conn, v_BCC); To BCC recepient
utl_smtp.Data(v_Mail_Conn,
'Date: ' || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
'From: ' || v_From || crlf ||
'Subject: '|| v_Subject || crlf ||
'To: ' || v_Recipient || crlf ||
'Cc: ' || v_cc || crlf ||
'Content-Type: text/html;' ||crlf ||
--'Hello this is a test email');
crlf || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf );
utl_smtp.Quit(v_mail_conn);
end;
Any suggestion how to approach this issue.
Thank you

Simple Mail Transfer Protocol RFC 5321 specifications.
      RCPT TO:<forward-path> [ SP <rcpt-parameters> ] <CRLF>
   The first or only argument to this command includes a forward-path
   (normally a mailbox and domain, always surrounded by ">" and "<"
   brackets) identifying one recipient.In other words, you can only define a SINGLE mailbox address at a time. Multiple addresses requires multiple repeats of this command verb, once per maibox.
Do not confuse this and the To: tag line in the Mime header that contains a comma delimited list of recipients. That tag line can contain anything - it is not parsed, not checked, and not verified as matching the actual recipient mailboxes as specified via the RCPT TO verb.

Create Adobe Form using Design Time for Processes and Forms

Hi all,
I am trying to create a form that have 3 fields:
1. pernr
2. ename
3. effective_date
I done all the necessary setup of BADI ,class, interface and form.
I need the step to step guide where you create the adobe form using the Design Time for Processes and Forms. Anyone have any idea?
Edited by: Siong Chao on Jan 3, 2011 4:54 AM
Edited by: Siong Chao on Jan 3, 2011 5:00 AM

Hi,
I couldn't get to your query..
What do you mean by step by step procedure for a design time & process for forms.
if you are a beginner and looking for basic examples to implement adobe forms there are lot of them in SDN, please search them.
let me know if your query was a very specific one.
Cheers,
Sai

Adobe Form used by more than one user simultaneously

Friends,
I am working on an online interactive Adobe form using Web Dynpro ABAP.
once the user enters the data and clicks the submit button, the data is sent to ztables.
the scenario is that more than one user can possibly use the same form simultaneously. in that case, how can i maintain synchronization ie how to avoid multiple users from using the form at the same time, when the form is already being filled by one user already.
I am guessing i have to do something with ADS for this.
Any thoughts or ideas would be greatly appreciated.
Thanks and Regards.

Hi Bertrand,
The purpose of allowing only one user is to ensure data consistency as you have guessed.
Is there a program name or transaction code where i can look up the lock entries and see if i can apply them to my web dynpro application or the adobe form.
I would greatly appreciate your help.
Thanks and Regards.

Making selective fields editable in adobe form [using web dynpro]

Hi,
I have displayed an adobe form using web dynpro application. But I have to make certain fields (not all fields) on this adobe form editable. I dont want to make this adobe form interactive because I dont have to save any data in database. The data entered in the editable fields will be saved as a pdf.
What I did so far:
1) The fields which I want as editable, I have given there type as "User entered/ optional" & for rest of the fields I have given type as "Read only".
2) In web dynpro, I have enabled the adobe
3) This is not making the fields editable.
4) If I write the following code in my webdynpro method WDDOMODIFYVIEW, then my data coming from adobe is not getting displayed even though the fields get selectively editable.
*data: LR_INTERACTIVE_FORM type ref to CL_WD_INTERACTIVE_FORM,
*LR_METHOD_HANDLER type ref to IF_WD_IACTIVE_FORM_METHOD_HNDL.
*check first_time = abap_true.
*LR_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT('adobe').
*LR_METHOD_HANDLER ?= LR_INTERACTIVE_FORM->_METHOD_HANDLER.
*LR_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( abap_true ).
Any inputs regarding this??
Thanks & Regards.

Hi,
Like I had mentioned using the following code in my webdynpro method WDDOMODIFYVIEW, my data coming from adobe form was not getting displayed even though the fields get selectively editable.
*data: LR_INTERACTIVE_FORM type ref to CL_WD_INTERACTIVE_FORM,
*LR_METHOD_HANDLER type ref to IF_WD_IACTIVE_FORM_METHOD_HNDL.
*check first_time = abap_true.
*LR_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT('adobe').
*LR_METHOD_HANDLER ?= LR_INTERACTIVE_FORM->_METHOD_HANDLER.
*LR_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( abap_true ).
So I kept this code & I also kept the Interface type "ABAP Dictionary based".
Additionally in Webdynpro, I used adobe form generated FM to get the adobe content & passed it to the "content" parameter of my adobe component in webdynpro.
Thanks & Regards.

Wanna Send email thru Adobe form...using tcode VA41

Similar Messages

Maybe you are looking for