Adding date with a query

we need to add two dates, infact minutes of one date to another date, with a query pls do throw in ur suggestions.
thanx in advance
amyt

Hi Lokman,
You can use this FM <b>RP_CALC_DATE_IN_INTERVAL</b>.
call function 'RP_CALC_DATE_IN_INTERVAL'
         exporting
              date      = sy-datum
              days      = 0
              months    = 6
              signum    = '+'
              years     = 0
         importing
              calc_date = wa_date.
Hope this will help.
Regards,
Ferry Lianto

Similar Messages

Adding data field in query print layout designer (PLD)

Dear Experts/Gurus,
I would like to add data field in query PLD in repetitive area1 but it can't. The query I made excluding sequence no., so I think I must use datafield for that. I use textfield in the repetitive area header1. is it correct what I have thought, I mean is it really datafield can't be add in the print layout designer if it is from query ? I appreciate your answer. TIA
Rgds,

No you can't, you will have to recreate the query with the missing field and recreate a new print layout for this. Is still a flaw in SAP B1.
If you go to the service market place under education you can get the flashbook for the print layout design and the query manager and wizard, study them, they are of great help to understand the technology behind the PLD and the queries in SAP B1.
Regards,
WB

SQL Error when adding data with UDO + Form

Good morning, friends.
Initially, I apologize for any mistakes in my English.
I am developing an addon for a client and now I came across a problem that started happening about 5 days ago:
I customized a MasterData postcodes in B1, I created a UDO (oCNSTCEP) and bind to a form created by the Screen Painter. It is noteworthy that this program has been operating without any problems in the customer environment for at least 3 months. Finally, for reasons unknown to the system now has to give the following message when I insert a new record:
[Microsoft] [SQL Server Native Client 10.0] [SQL Server] Conversion failed When converting the nvarchar value 'oCNSTCEP' to data type int. (CINF)
The strange thing is that the record is written into the UDT corresponding to the UDO. But the error message is given, giving the user the impression that the routine was not completed successfully.
Yesterday you told me what is happening the same error in another form, ie, the way any given recording through UDOs are giving problem.
I searched for this post in SDN and the maximum that I discovered is that it could be happening because of the variable @ object_type in SBO_Notification be as int instead of being as nvarchar (20). I checked the stored procedure and @object_type is nvarchar(20) type.
I would like to help for a solution to this problem. Since now, thank you!
Sincerely,
Junior

The error is coming from the stored procedure and is easy to fix,
Anywhere where you check the @object_type, you need to put the value in single quotes.
e.g if your stored proc includes both of these:
IF @object_type = 17
IF @object_type = 'oCNSTCEP'
It will fail with the error you mentioned. But if you have:
IF @object_type = '17'
IF @object_type = 'oCNSTCEP'
It will work.

Successive dates with last day of that month being added to succesive date

Hi ,
I have a piece of code that displays the succuessive dates from the given date to tilll date with a date interval of 30 days. My requirement goes some thing like this. since the given date is '26-nov-08' the next successive date should be the number of days in nov(30) added to '26-nov-08'. that will be around 26-dec-08. For this date it has to add the number of days in December(31) to '26-dec-08' and that turns out to be '26-jan-09'. and this must go on till date.
In the below code i have used 30 for the interval of 30 days but the interval has to the last day of the successive date's month( for dec the interval has to 31 and for january the interval has to be 31 and for february 28)
select to_date('26-nov-08', 'dd-mon-yy') + (level - 1) * 30
from dual
connect by level <= trunc((sysdate-to_date('26-nov-08', 'dd-mon-yy'))/30 )Please advice

hi ,
the query sent by you is correct and could it be in corporated for this query :
SELECT TRUNC(inst_due_date) + (LEVEL-1 ) * (ilpa_term_type),iloan_code,LOAN_AMT,FEE_AMT,
LOAN_DATE,LOAN_STATUS_ID
FROM (
SELECT inst_due_date,sm.iloan_code,LOAN_AMT,
FEE_AMT,
LOAN_DATE,
LOAN_STATUS_ID,
decode(sm.ilp_term_type, 26 ,14,24,15,12,(select to_number(to_char(last_day(inst_due_date),'dd')) from dual)) as ilpa_term_type
FROM ST_IL_SCHEDULE sc,ST_IL_MASTER sm
WHERE sc.iloan_code = sm.iloan_code
AND sc.inst_num = (SELECT MAX(inst_num) FROM ST_IL_SCHEDULE b WHERE b.iloan_code = sc.iloan_code)
AND sc.iloan_code =123456789)
CONNECT BY LEVEL <= TRUNC((TRUNC(SYSDATE)-TRUNC(inst_due_date))/(ilpa_term_type) )
Here we are using the decode concept if ilp_term_type = 26 then 14 but we need to implement the code of adding the number of days to that month in place of this code :
select to_number(to_char(last_day(inst_due_date),'dd')) from dual:
Please advice

Adding data to array from an empty query

I am trying to add data to an array from a database query, however some queries will return no data (empty set). In that case I would like to add fake data so that the index size matches my other array (assetsid).
Thank you for your time.
     int f2a=0;
     String[] exportedtime;
     String[] exportedtime_formated;
     ArrayList exportedtime_ar = new ArrayList(f2a);
     ArrayList exportedtime_formated_ar = new ArrayList(f2a);
     for (int jj=0; jj<assetsid_ar.size(); jj++)
          String eng_id_out = (String) eng_id_h2a_ar.get(jj);
          String fuel2a = "select engineserialnumber, TO_CHAR(exportedtime, 'MM/DD/YYYY HH24:MI:SS') exportedtime, TO_CHAR(exportedtime, 'DD/MON/YY') as exportedtime_formated from tblexportedjobs where exportid = (select max(exportid) from tblexportedjobs where engineserialnumber = "+eng_id_out+") and engineserialnumber = "+eng_id_out+"";
          ResultSet fuel2a_myResultSet = stmt.executeQuery(fuel2a);
              while (fuel2a_myResultSet.next()) {
               f2a=f2a+1;
               exportedtime = new String[f2a+1];
               exportedtime_formated = new String[f2a+1];
               exportedtime[f2a]=fuel2a_myResultSet.getString("exportedtime");
               exportedtime_formated[f2a]=fuel2a_myResultSet.getString("exportedtime_formated");
     if (exportedtime[f2a].equals("")) {
    exportedtime[f2a] = "01/01/2004 00:01:01";
     } else {
     exportedtime[f2a] = exportedtime[f2a];
               exportedtime_ar.add(exportedtime[f2a]);
     if (exportedtime_formated[f2a].equals("")) {
    exportedtime_formated[f2a] = "01/JAN/04";
     } else {
     exportedtime_formated[f2a] = exportedtime_formated[f2a];
               exportedtime_formated_ar.add(exportedtime_formated[f2a]);
     }

I'd be curious to know if it would be possible to rewrite your query using a JOIN so you could get all the data in one query. The way you've written it will require N network round trips, where N is the number of engine serial numbers. I wonder if clever application of a JOIN with a GROUP BY would do the trick in one?
I don't care for the formatting stuff you're doing, either. There's no need to ask the database for that. Bring the dates over and handle the formatting in Java using java.text.SimpleDateFormat. Less work for the database AND it won't be so tied to Oracle, since you won't need that TO_CHAR function anymore.
I'd give clients the raw java.sql.Date and let them worry about formatting it the way they wish. That's not a persistence concern.
I always prefer data structures like List and Map when I'm working with database result sets. They grow to fit the # of records that I get back. If I want arrays, I can always use the toArray() method to generate them.

Error when querying OLAP data with BI answers

Have been doing all the Lessons in "Using Oracle OLAP With Oracle BI Enterprise Edition 10g Release 3". Got till lesson 3 where I'm supposed to query the data with Answers but If I add any of the facts to the report, I get the following error:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17003] Oracle gateway error: Unsupported data type 101. (HY000)
SQL Issued: SELECT Customer."Ship To" saw_0, Measures.COST saw_1 FROM Global ORDER BY saw_0
So I was wondering if anyone knows what the catch could be.
Thanks in advance!

Yes. Me too. I have the same issue and I don't find any information about it. Could anyone help ?

Problem with different resultset with same data and same query in Oracle 8.1.7 and 9i

Hello,
I have been using this query in oracle 8.1.7
SELECT
ID,
AREA_NO
FROM MANAGER_AREA MGR
WHERE COMPANY_ID = :id AND
(:value < (SELECT COUNT(ROWID)
FROM MANAGER_WORK MW
WHERE MW.AREA_ID = MGR.ID AND
(MW.END_WORK IS NULL OR MW.END_WORK >= SYSDATE)))
order by AREA_NO;
In the above query I want to see rows from MANAGER_AREA table depending upon date criteria in the table MANAGER_WORK and also upon the parameter :value i.e if I pass a value as 0 I get to see records for which their is atleast 1 record in MANAGER_WORK with the date criteria and if I pass -1 then I get all the records because minimum value that count(*) would give is 0. The resultset was as expected in 8.1.7.
A couple of days back I installed PERSONAL 9i to test for testing the basic functionality of our program with the same data. This query fails and irrespective whether I pass -1 or 0 it returns me same dataset which I would have got in case if I pass 0.
I do not know whether this is a bug that has got introduced in 9i. Can anybody help me with this problem. It would be difficult for me to change the parameter send to this query as the Query is called from many different places.
Thanks in advance
Amol.

I cannot use a Group by and a having statement over here. The problem with 'Group by' and 'having' clause is If I have to make a join between the two tables. When I use join then I get only rows that are linked to each other in the table.
If I use outer join to solve that problem then I have to take in consideration the other date condition. My previous query use to virtually discard the corelated query result by using -1 as the value. This will not happen in the join query.
Amol.

Not able to use date with time in sql query

Hi,
select a.contract_number,b.start_date,b.end_date,b.price_negotiated,b.attribute_category,b.attribute1,a.sts_code,a.contract_number_modifier,b.cle_id,b.creation_date
from OKC_K_HEADERS_ALL_B a,OKC_K_LINES_B b
where a.id = b.dnz_chr_id
and b.cle_id is not null
and a.contract_number_modifier is not null
and a.sts_code in ('ACTIVE','SIGNED','60 DAY HOLD','HOLD')
and b.creation_date between to_date('21-10-2013 9:19:48','DD-MM-YYYY HH24:MI:SS') and sysdate;
If I execute this query in toad it is giving me proper results.This query populates the results between the two date with time.
But I am facing issue when I am using this query in the procedure. The procedure is as below.
If I use the same query in the procedure I am getting wrong output.
CREATE OR REPLACE procedure xx_prog_upd_annualized_amt(errbuf out varchar2, retcode out varchar2)
as
cursor c1 (l_date in varchar2)is
select a.contract_number,b.start_date,b.end_date,b.price_negotiated,b.attribute_category,b.attribute1,a.sts_code,a.contract_number_modifier,b.cle_id
from OKC_K_HEADERS_ALL_B a,OKC_K_LINES_B b
where a.id = b.dnz_chr_id
and b.cle_id is not null
and a.contract_number_modifier is not null
and a.sts_code in ('ACTIVE','SIGNED','60 DAY HOLD','HOLD')
and b.creation_date between to_date(l_date,'DD-MM-YYYY HH24:MI:SS') and sysdate;
v_date varchar2(100);
v_total_days number;
v_annualized_amount number;
begin
begin
select max(fcr.actual_start_date) into v_date
from fnd_concurrent_programs_vl fcp
,fnd_concurrent_requests fcr
where fcp.concurrent_program_id = fcr.concurrent_program_id
and fcp.user_concurrent_program_name like 'Renewed Annualized Amount Updation';
exception
when others then
fnd_file.put_line(fnd_file.log,'Invalid date');
end;
fnd_file.put_line(fnd_file.output,v_date);
fnd_file.put_line(fnd_file.output,sysdate);
fnd_file.put_line(fnd_file.output,'***************Start of Program***************');
fnd_file.put_line(fnd_file.output,'***************Hi***************');
For i in c1(v_date) loop
SELECT
         1
       + 30 * TRUNC (MONTHS_BETWEEN ( TO_DATE (i.end_date, 'DD-MON-YYYY'), TO_DATE (i.start_date, 'DD-MON-YYYY')))
       + LEAST (EXTRACT (DAY FROM TO_DATE (i.end_date, 'DD-MON-YYYY')), 30)
       - LEAST (EXTRACT (DAY FROM TO_DATE (i.start_date, 'DD-MON-YYYY')), 30)
       + CASE
            WHEN EXTRACT (DAY FROM TO_DATE (i.end_date, 'DD-MON-YYYY')) < EXTRACT (DAY FROM TO_DATE (i.start_date, 'DD-MON-YYYY')) THEN 30
            ELSE 0
         END
          daysbetween into v_total_days
FROM dual;
fnd_file.put_line(fnd_file.output,i.contract_number);
fnd_file.put_line(fnd_file.output,v_total_days);
If v_total_days < 360 then
v_annualized_amount := (360*i.price_negotiated)/v_total_days;
update OKC_K_LINES_B
set attribute_category = 'Annualized Amount',attribute1 = v_annualized_amount
where cle_id = i.cle_id;
   fnd_file.put_line(fnd_file.output,v_annualized_amount);
    fnd_file.put_line(fnd_file.output,i.cle_id);
    elsif v_total_days >= 360 then
update OKC_K_LINES_B
set attribute_category = 'Annualized Amount',attribute1 = i.price_negotiated
where cle_id = i.cle_id;
end if;
end loop;
commit;
fnd_file.put_line(fnd_file.output,'***************End of Program***************');
null;
end;

SureshM wrote:
Hi Purvesh,
Apologize for not giving the sufficient information.
max(fcr.actual_start_date) = here I am getting date with time (for eg :9/4/2012 6:47:49 PM)
Datatype for this column is date.
This actual start date I am storing in varchar2 variable and then converting this value to date with time.
My requirement is to pick the rows between the two timestamps which I am unable to do in the procedure.
Regards
Suresh
YOu are losing the Time information while fetching the data into a VARCHAR2 variable. change the datatype of v_date to DATE and get rid of the TO_DATE logic in cursor and simply use v_date variable.
Message was edited by: PurveshK misread.

Problem with a query with a BLOB data type

Hi i've a problem with this query in 11g. R1
SELECT
      LOGTIMESTAMP,
      LOGTIMEMILLIS,
      MSGID,
      XMLTYPE(MESSAGEBODY, nls_charset_id('AL32UTF8')).getClobVal() as LLamada
FROM
    vordel.AUDIT_MESSAGE_PAYLOAD,
    vordel.AUDIT_LOG_POINTS
WHERE
    AUDIT_LOG_POINTS.LOGPOINTSPK = AUDIT_MESSAGE_PAYLOAD.MP_LOGPOINTSPK AND
    LOGTIMESTAMP between TO_TIMESTAMP('03-12-2011 00:00','DD-MM-YYYY HH24:MI') and TO_TIMESTAMP('03-12-2011 12:00','DD-MM-YYYY HH24:MI')
     and filtertype = 'LogMessagePayloadFilter'
and filtername like 'Log Llamada%'MESSAGEBODY: data type of the Column is BLOB
throw this error after execute the query
Error:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00200: could not convert from encoding UTF-8 to UCS2
Error at line 1
ORA-06512: at "SYS.XMLTYPE", line 283
ORA-06512: at line 1

Could you check the BLOB really contains UTF-8 encoded XML?
What's your database character set?The BLOB contains UTF-8 Encoded
and the database where i am connectes have AL32UTF8 character set, but my internal instance have "AMERICAN_AMERICA.WE8ISO8859P1"
that is a problem?
How could I change the character set of the oracle local client to the character set of the remote oracle data base?

How can I make a query by date with several TDMS files?

Hi,
I have a project that can write and read TDMS files everyday (a file for each day with date and time). There, I can import those files to excel (I choose a file and load it). But, I have a question: How can I make a query by date with those TDMS files? I'd like make a time stamp for start date and stop date, where I could compare the TDMS file dates and sum the values that are in the channels where these files are similar. For example, I save a file with "02/01/2013" name, in other day "03/01/2013", in other day "04/01/2013"... so, i'd like put in time stamp for start date "02/01/2013" file and to stop date "04/01/2013" file, than, sum all values that range with my TDMS files existing. How can I make that?
Thanks all,
Val

Hello Val_Auto.
You're Brazilian, no? Me too. = ^ - ^ =
I converted VI to version of your LabVIEW (8.5). Is attached in this reply.
This VI search all your TDMS in a range of dates and join them in a single TDMS. I hope this is what you wanted.
Query TDMS is the main VI. The TDMS VI Search changes the date format that out from calendar control (which is DD / MM / YYYY) to DD-MM-YYYY. This is because you can't name files using "/". I chose "-" but, if necessary, you should change to keep the same format of your TDMS files.
If you have any doubt as to its operation or how to make changes to adapt VI for your application, keep at your disposal.
Thank you for your contact; I hope have helped you and succeed in your application.
Wesley Rocha
Application Engineer
National Instruments Brazil
Visite a nossa comunidade em PORTUGUÊS!!!
Attachments:
Query TDMS.vi ‏62 KB
tdms search.vi ‏24 KB

APD query key date with variable for time dependent MD display attributes

Hello,
In a APD I use a query as a source with a query key date that is filled with a customer exit variable.
When I run the query as a user, the time dependent MD display attributes look fine. However, when I use the query in an APD, I get no values for the time dependent display attributes.
Any suggestions?
Thanks

Hi,
Try to run query using RSCRM_BAPI Tcode, this you can also schedule in background
Thanks
Reddy

RSCRM: Query date with customer exit variable

Hi All,
Is there any way to run the RSCRM transaction with a query with a customer exit variable for a date characteristic?
The issue is that the query ran ok but the variable is not being updated when the RSCRM query is running with a background job or a process chain.
Thanks in advance
EV

I do not think you can select Customer Exit variable, if you see the type is selected to Char Value Variables and it is not editable.
It would be suggested to go for Customer Exit procesing type for your text variable.
Cheers,
Neel.

HR -- adding year with date and month

Hi all,
Can any one let me know what is the logic for adding Year with date and month in HR.
ex: 01.10.2008 from this date it should be 2 years.
thnks
joshi.

Hi
u can add days to the date directly ....
if u have the date V_DATE of type sy-datum u can add directly number of days to get disired date ..
v_date1 = v_date + 365 .
hope it helps ..........

Is there any way to restore data truncated with TRUNCATE query in Oracle9i

Hi, Is there any way to restore data truncated with TRUNCATE query in Oracle9i DB...
Thanks in advance...

Hi,
you can flash back DML queries like insert, update
but it is not possible for some DDL like truncate, alter, and and drop columns etc that change structure of table.
e.g.
SQL> select * from t2;
C1
3
SQL> select dbms_flashback.get_system_change_number from dual;
GET_SYSTEM_CHANGE_NUMBER
496378
SQL> truncate table t2;
Table truncated.
SQL> select * from t2 as of scn(496378);
select * from t2 as of scn(496378)
ERROR at line 1:
ORA-01466: unable to read data - table definition has changed
Andrey

To show the data from BI query in bar graph with thousand separator

Hello Experts,
I am using Visual composer 7.0.I have designed an application where i have user BI query to show data as a bar graph.I have roundoff the data to 2 places of decimal an i have to show the data with thosand separator as well.
i am using the formula
NVAL(NSTR(@Actual_value,"C.2"))
Where @Actual_value is a value which comes from BI queryand is to be displayed as a bar graph.
Points will be awarded for reply.
Thanks ,
Rakesh

Hi Rakesh,
I have found some links which may help you.
http://help.sap.com/saphelp_nw70/helpdata/en/38/2d9b732beb4c68bba2962602a7d6bd/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/26/64fb472a144a0dbaf88f5ec75d9270/content.htm
http://oregonstate.edu/dept/computing/warehouse/PDF/8-reports.pdf

Adding date with a query

Similar Messages

Maybe you are looking for