Want a code for the below..
Hi,
Please let me know, in ALV's how to display the list output as following.
main heading1 main heading2
sub-heading1 sub-heading2 sub-heading1 sub-heading2
thanks,
arun
use REUSE_ALV_HIERSEQ_LIST_DISPLAY
regards
shiba dutta
Similar Messages
-
ABAP Routine code for the below logic
Hello BW Experts ,
I need to write a complex ABAP routine in BW .
Following is the detail explaination .
Can anyone tell me the ABAP code for the below logic?
It would be a greate help as I am unable to do this
since last two days.
WBS Elements are maintained at IOS and Warranty levels in R/3 side.
The IOS WBS is a top level of WBS element and below that the Warranty WBS level.
The IOS and Warranty WBS elements can be differentiated by means of priority field.
When priority = i , WBS Element is known as IOS Level WBS Element and
When priority = Y the WBS element is known as Warranty WBS element.
The Equipment Number is maintained compulsorily at IOS Level WBS elements only.
It is not maintained at Warranty WBS Element.
But the Cost is maintained at Warranty WBS Elements.
In BW I need all Warranty WBS ( priority = Y) along with their cost figures and Equipment Numbers.
But as the Equipment Number is not maintained compulsorily at Warranty WBS level we have asked to
Copy it from IOS WBS ( priority = i ) and assign it to Warranty WBS level ( priority = Y ).
So I have included the Equipment Number in the ODS and in update rules I need to write the routine for it as
per the above logic.
The Equipment Number is coming from Master data of WBS Element.
The WBS element master data we are loading in BW .
Also the same WBS Element transaction data is coming from the transaction data data source in BW.
Following fields / infoobjects and the table names in BW :
1. Equipment Number : /BIC/ZEQUIPMNT and table name /BIC/MZWBS_ELEM.
2. WBS Element : ZWBS_ELEM is coming from transaction data data source as well as master data.
In ODS update rules it is coming from transaction data data source Comm_structure-ZWBS_ELEM.
Also we are loading separetly the master data for ZWBS_ELEM.
The ZEQUIPMNT is an attribute of ZWBS_ELEM.
3. Priority : PRIORITY and table name /BIC/MZWBS_ELEM.
The info object name for Priority is 0Priority but in master data table /BIC/MZWBS_ELEM
the field name is PRIORITY.
When PRIORITY = ' i ' then ZWBS_ELEM is at IOS Level
When PRIORITY = ' y ' then ZWBS_ELEM is at Warranty Level.
4. ODS name : /BIC/AZCOST00 and same is table name active data table .
So please tell me the routine Code .
Best Regards ,
Amol.Hi Dinaker,
Did you find any solution for this issue. I too have a similar requirement of pulling all the service orders for a specific Purchase Order in the BW report.
Thanks,
SAPBWI -
Need ABAP code for the below Services requirement
Hi,
We have a requirement to show all the services for a particular Purchase order number.For this I built a view on 2 tables ESLL and EKPO.Now based on the below logic I need to bring the services for the Purchase order..
1.Enter PO number,item no. and Doc category in EKPO and find the Pack no.
2.Now take the Pack no. of EKPO and give in ESLL and find the Sub pack no.
3.Now take this Subpack no. and Give this sub pack as Pack no. in ESLL
4.This will be the Service entry record for that PO number.
Can any one Please suggest me to how to write the ABAP code for the above logic.
Thanks & Regards,
DinakarHi Dinaker,
Did you find any solution for this issue. I too have a similar requirement of pulling all the service orders for a specific Purchase Order in the BW report.
Thanks,
SAPBWI -
What is the T CODE for the below menu ......
Hi SAP Gurus,
Need your quick responce.....
when i go to SPRO>Cross-Application Components>General Application Functions>Cross-Application Document Numbering>Argentina-->Assign Document Class to Document Type.
I want to know the T CODE of "Assign Document Class to Document Type" as it is showing SPRO to me hence i went to menu Additional Information>Display Key> IMG Activity.....
Now i see "OFFDOCNO_AR_003" displayed against Assign Document Class to Document Type.
I guess this is not the T CODE i try all possible option like "AR_003", "OFFDOCNO_AR_003" etc as a T CODE for Assign Document Class to Document Type but is not showing....
Please advice me what could be the T CODE of the above menu path........
Regards.Hi,
Not all activities are assigned a TCode. However, you can create a TCode if you want.
Go to TCode SE93.
Give a TCode (as you require, but it should start with Z) like ZTBL and click on create.
In the resulting screen, give a description and select 'Parameter Transaction'.
In the next screen, give the following values.
Transaction - SM30
Skip initial screen - enabled
Inherit GUI Attributes - enabled
Add the following in 'Default Values' table at the end.
VIEWNAME - V_T003_B_I
SHOW - X
Save this transaction select a package other than local (else you cant transport)
Now you can access the table maintenance thru the TCode you created (ZTBL in this example).
Hope this helps.
Ravi. -
Please give the complete code for the below problems with action page and Form.
Create an array, which is holding ‘n’ strings (words), , and implement the functionality to search given string is present in the array. Give an option to the user to enter the word to be searched
Create a static array of ‘n’ numbers , and implement the functionality to search given number is present in the array. Give an option to the user to enter the number to be searched
Implement the functionality to search given word is present with in the predefined sentence. Give an option to the user to enter the word to be searchedAs haxtbh has pointed out, these forums are for HELPING you fix code you've already tried and are having issues with. We aren't here to write your code, whether for a project or homework, from scratch. We can only help you if you help us by making an attempt.
V/r,
^_^ -
Variable Exit Code for the below requirement, Pls Urgent
I have a WorkDate and Finish Date coming in the cube. I have created 2 fields InfoObject High and InfoObject Low.
1. The InfoObject High should output "Gigh" if the current date (or date entered into the selection criteria) is after the workdate and the finish date is blank.
2. The InfoObject Low should output "Low" if the Finish Date has a value and it's greater than the WorkDate.Hi Raj,
In ver 3.5 this can be done using virtual logic in transaction CMOD. Please note you will need to key your infoobject names below.
You will need to implement the following code within ZXRSRZZZ.
FORM USER_<i>cubetobesepecified</i>
FORM USER_<i>cubetobespecified</i> USING I_S_RKB1D TYPE RSR_S_RKB1D
CHANGING C_S_DATA TYPE ANY.
ASSIGN COMPONENT G_POS_<i>cube_dateobjectusedforuserinput</i>
OF STRUCTURE C_S_DATA TO <l_datekeyed>.
ASSIGN COMPONENT G_POS_<i>cube_intoobjecthigh</i>
OF STRUCTURE C_S_DATA TO <l_highlow>.
ASSIGN COMPONENT G_POS_<i>cube_workdateojbect</i>
OF STRUCTURE C_S_DATA TO <l_workdat>.
ASSIGN COMPONENT G_POS_<i>cube_finishdateobject</i>
OF STRUCTURE C_S_DATA TO <l_finishdat>.
IF <l_finishdate> IS INITIAL
AND <l_datekeyed> > <l_workdat>.
<l_highlow> = 'High'.
ELSEIF NOT <l_finishdate> IS INITIAL
AND <l_datekeyed> < <l_workdat>.
<l_highlow> = 'Low'.
ENDIF.
ENDFORM.
After this is complete you will need to implement the following code in ZXRSRU02.
l_s_chanm-chanm = '<i>dateobjectusedforuserinput<i>'.
l_s_chanm-mode = rrke_c_mode-read.
append l_s_chanm to e_t_chanm.
l_s_chanm-chanm = '<i> intoobjecthigh</i> '.
l_s_chanm-mode = rrke_c_mode-no_selection.
append l_s_chanm to e_t_chanm.
l_s_chanm-chanm = '<i>workdateobject<i>'.
l_s_chanm-mode = rrke_c_mode-read.
append l_s_chanm to e_t_chanm.
l_s_chanm-chanm = '<i>finishdateobject<i>'.
l_s_chanm-mode = rrke_c_mode-read.
append l_s_chanm to e_t_chanm.
Lastly under your Global data declarations, you will need to implement this code.
G_POS_<i>cube_dateobjectusedforuserinput</i>,
G_POS_<i>cube_intoobjecthigh</i>,
G_POS_<i>cube_workdateojbect</i>,
G_POS_<i>cube_finishdateobject</i>.
I hope this helps.
Kind Regards,
Larry -
Required clarification for the below code:
Hi All,
For one of my requiremnet, i found one solution which worked as expected.. But i was not able to understand the logic.. Can any one explain me the below
syntax what exactly the meaning for the below code:
Code:
SELECT NULL
FROM apex_application_page_ir_cond cond
WHERE cond.application_id = v('APP_ID')
AND cond.page_id = v('APP_PAGE_ID')
AND cond.condition_type = 'Filter'
AND cond.condition_enabled = 'Yes'
AND cond.report_id = (SELECT report_id
FROM apex_application_page_ir_rpt
WHERE application_id = v('APP_ID')
AND page_id = v('APP_PAGE_ID')
AND application_user = v('APP_USER')
AND report_type = 'SESSION'
AND TO_CHAR (session_id) = v('SESSION')
AND report_name IS NULL))
For your refernec i have enclosed the link also
URL : Re: Interactive_Report with Search Bar only
Thanks,
Anoo..Anoo,
Two things. First, it makes things a lot easier if you put "{code}" (no quotes) around your SQL when you post it:
SELECT rowid "EDIT", attr_code,ATTR_ATCL_CODE "Atcl Code", attr_description, attr_atcl_code,
attr_abbreviation,
attr_include_short_desc "Include short desc",
attr_include_long_desc "Include long desc",
attr_attr_type "AttrType", rowid "DELETE"
FROM t_new WHERE EXISTS (SELECT 1 FROM APEX_APPLICATION_PAGE_IR_COND WHERE APPLICATION_ID = :APP_ID AND PAGE_ID = :APP_PAGE_ID AND CONDITION_ENABLED = 'Yes'
AND APPLICATION_USER = :APP_USER) ORDER BY attr_description;Though the spacing still needs work, it's a little easier to read.
Second, your query's exist clause just checks for an enabled condition, without checking the condition type. Without checking, I'd guess that either APEX creates at least one internal condition, or that your IR has a default condition on it (other than a filter). Try adding the condition_type constraint to your where clause to see if that fixes it.
Also, I noted that you don't have the extra code for getting the report_id. It shouldn't be necessary, since there's currently only support for one IR per page, but you asked what the differences are.
-David -
Performance for the below code
Can any one help me in improving the performance for the below code.
FORM RETRIEVE_DATA .
CLEAR WA_TERRINFO.
CLEAR WA_KNA1.
CLEAR WA_ADRC.
CLEAR SORT2.
*To retrieve the territory information from ZPSDSALREP
SELECT ZZTERRMG
ZZSALESREP
NAME1
ZREP_PROFILE
ZTEAM
INTO TABLE GT_TERRINFO
FROM ZPSDSALREP.
*Preparing Corporate ID from KNA1 & ADRC and storing it in SORT2 field
LOOP AT GT_TERRINFO INTO WA_TERRINFO.
SELECT SINGLE * FROM KNA1 INTO WA_KNA1
WHERE KUNNR = WA_TERRINFO-SALESREP.
SELECT SINGLE * FROM ADRC INTO WA_ADRC
WHERE ADDRNUMBER = WA_KNA1-ADRNR.
IF NOT WA_ADRC-SORT2 IS INITIAL.
CONCATENATE 'U' WA_ADRC-SORT2 INTO SORT2.
MOVE SORT2 TO WA_TERRINFO-SORT2.
MODIFY GT_TERRINFO1 FROM WA_TERRINFO.
APPEND WA_TERRINFO TO GT_TERRINFO1.
CLEAR WA_TERRINFO.
ENDIF.
CLEAR WA_KNA1.
CLEAR WA_ADRC.
ENDLOOP.
ENDFORM. " RETRIEVE_DATAHi
The code is easy so I don't think you can do nothing, only u can try to limit the reading of KNA1:
FORM RETRIEVE_DATA .
CLEAR WA_TERRINFO.
CLEAR WA_KNA1.
CLEAR WA_ADRC.
CLEAR SORT2.
*To retrieve the territory information from ZPSDSALREP
SELECT ZZTERRMG
ZZSALESREP
NAME1
ZREP_PROFILE
ZTEAM
INTO TABLE GT_TERRINFO
FROM ZPSDSALREP.
SORT GT_TERRINFO BY SALESREP.
*Preparing Corporate ID from KNA1 & ADRC and storing it in SORT2 field
LOOP AT GT_TERRINFO INTO WA_TERRINFO.
IF KNA1-KUNNR <> WA_KNA1-KUNNR.
SELECT SINGLE * FROM KNA1 INTO WA_KNA1
WHERE KUNNR = WA_TERRINFO-SALESREP.
IF SY-SUBRC <> 0.
CLEAR: WA_KNA1, WA_ADRC.
ELSE.
SELECT SINGLE * FROM ADRC INTO WA_ADRC
WHERE ADDRNUMBER = WA_KNA1-ADRNR.
IF SY-SUBRC <> 0. WA_ADRC. ENDIF.
ENDIF.
ENDIF.
IF NOT WA_ADRC-SORT2 IS INITIAL.
CONCATENATE 'U' WA_ADRC-SORT2 INTO SORT2.
MOVE SORT2 TO WA_TERRINFO-SORT2.
* MODIFY GT_TERRINFO1 FROM WA_TERRINFO.
APPEND WA_TERRINFO TO GT_TERRINFO1.
CLEAR WA_TERRINFO.
ENDIF.
ENDLOOP.
ENDFORM. " RETRIEVE_DATA
If program takes many times to upload the data from ZPSDSALREP, you can try to split in sevaral packages:
SELECT ZZTERRMG ZZSALESREP NAME1 ZREP_PROFILE ZTEAM
INTO TABLE GT_TERRINFO PACKAGE SIZE <...>
FROM ZPSDSALREP.
SORT GT_TERRINFO BY SALESREP.
*Preparing Corporate ID from KNA1 & ADRC and storing it in SORT2 field
LOOP AT GT_TERRINFO INTO WA_TERRINFO.
IF KNA1-KUNNR <> WA_KNA1-KUNNR.
SELECT SINGLE * FROM KNA1 INTO WA_KNA1
WHERE KUNNR = WA_TERRINFO-SALESREP.
IF SY-SUBRC <> 0.
CLEAR: WA_KNA1, WA_ADRC.
ELSE.
SELECT SINGLE * FROM ADRC INTO WA_ADRC
WHERE ADDRNUMBER = WA_KNA1-ADRNR.
IF SY-SUBRC <> 0. WA_ADRC. ENDIF.
ENDIF.
ENDIF.
IF NOT WA_ADRC-SORT2 IS INITIAL.
CONCATENATE 'U' WA_ADRC-SORT2 INTO SORT2.
MOVE SORT2 TO WA_TERRINFO-SORT2.
* MODIFY GT_TERRINFO1 FROM WA_TERRINFO.
APPEND WA_TERRINFO TO GT_TERRINFO1.
CLEAR WA_TERRINFO.
ENDIF.
ENDLOOP.
ENDSELECT.
Max -
I want to receive the verification code for the keychain but I was sent to unknown number because the last two digits do not represent my phone number, so how can I change it to receive it on my cell phone ?
I found this in the iCloud Keychain FAQs:
How do I set up iCloud Keychain on a new device if I don't have one of my other devices to approve from?
If you don't have access to any of your other devices that are using iCloud Keychain, you can still set up iCloud Keychain on another device if you have these items:
- Your iCloud Security Code
- The device that is using the SMS-capable phone number you provided when you first set up iCloud Keychain. A verification code is sent via SMS to this phone number. If you don't have access to this number, contact Apple Support, who can verify your identity so that you can complete setup on your new device.
- If you have these items, follow the iCloud Keychain setup steps documented above. Your iCloud Keychain will then be pushed from the cloud to the new device.
So it seems that you would have to directly contact the Apple Support: http://www.apple.com/support/icloud/contact/ -
I entered the correct download code for "THE HOST" but instead got a copy of "SPRING BREAKERS"! All of the prompts identified it as "The Host" but the final product was "Spring Breakers"! I called a friend who has a copy of that movie and the download codes are not even remotely alike!! How can I correct this error? I 'd rather have SyFy that a bubblegum teenager flick!! HELP ME, PLEASE?!
Hello Old Dogg new tricks,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Best of luck,
Mario -
Provide the java code for the following scenario.
Hi Experts,
I have tried with all the combinations for this scenario. As per my understanding i require java code for the following scenario
so that it becomes easy........
I require a Message mapping for this Logic.
In the Source there are 4 fields and, the Target side, the fields should appear like this.
Source Structure- File
Record
|-> Header
Order_No
Date
|-> Item
Mat_No
Quantity
Target Structure-IDoc
IDoc
|-> Header
|-> Segment
Delivery_Order_No
Recv_Date
|-> Item
|-> Segment
Delivery_Order_No
Material_Num
Recv_Quantity.
The Logic is for every Order number an IDOC is generated.And if the Material num matches then the quantity should be added. and important note is that the material numbers are different for every order number. That means if a material number is 2 in the order number A. Then the material number can never be 2 in any of the order numbers.Here is the following with an example for the above scenario.
For example:-
we have
Source Structure- File
Order-no Date Mat_No Quantity
1 01/02/2011 A 10
1 01/02/2011 B 15
1 01/02/2011 A 10
2 01/02/2011 C 10
2 01/02/2011 C 10
3 01/02/2011 D 20
3 01/02/2011 D 10
3 01/02/2011 E 25
Target Structure-IDoc
Delivery_Order_No Recv_Date Material_Num Recv_Quantity
1 01/02/2011 A 20
1 01/02/2011 B 15
2 01/02/2011 C 20
3 01/02/2011 D 30
3 01/02/2011 E 25
So for this example total of 5-Idocs created. That means for this example if Order_No is 1 When the Mat_No is A the quantity gets added. For this Scenario 1 IDoc with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) is generated by adding the quantity field in the Target Side. Similarly if Order_No is 1 when the Mat_No is B then separate IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) in the Target Side. Similarly, if Order_No is 2 when the Mat_No is C, an IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) by adding the quantity field in the Target Side. ike wise the process goes on upto 3.Kindly do the needy..
Kindly provide the java code.
Thanq very much in advance..what i have understood from ur example is that u want to generate an idoc for unique combination of Order-no and Mat_No
if yes then chk the below mapping..
change the context of Order_No, Date, Mat_No and Quantity to Record (right click-> context)
1)
Order-no
----------------------concat[;]---sort----splitbyvalue(valuechanged)-----collapse context---IDoc
Mat_No
2)
Order-no
--------concat[;]---sort----splitbyvalue(value changed)---collapse context---UDF1--splitbyvalue(each value)--Delivery_Order_No
Mat_No
3)
Order-no
-----------concat[;]---sortbykey----------------------- \
Mat_No / \
Date--------------- / \
----------------------------------------------------------FormatByExample-----collapsecontext---splitbyvalue(each value)----Recv_Date
Order-no /
-----------concat[;]---sort----splitbyvalue(value changed)
Mat_No
4)
Order-no
--------concat[;]---sort----splitbyvalue(value changed)---collapse context-UDF2--splitbyvalue(each value)--Material_Num
Mat_No
5)
Order-no
-----------concat[;]---sortbykey
Mat_No /
Quantity --------------- /
----------------------------------------------------------FormatByExample-----SUM(under statistic)----Recv_Quantity
Order-no
-----------concat[;]---sort----splitbyvalue(value changed)
Mat_No
UDF1:
String [] temp= a.split(";");
return temp[0];
UDF2:
String [] temp= a.split(";");
return temp[1]; -
Here the SSCCE code for the prvious problem posted by me.
Following is the SSCCE code for the program of search which is having the problem i have asked before.
here when you run it will show a form which have a search button on it and when you press it a panel will shown below which have a table( it is just a bounded area without any column or row as i have removed the database functionality and we dont have to do with it).
the problem is the same that firstly i want to make the panel invisible.
(the blue and yellow colors are just to seperate the panel and the container) Secondly i want to remove the extra large space added below the last table and thirdly i want that on each press of the search button the scrollbar will focus on the new table added.
import javax.swing.*;
import javax.swing.table.DefaultTableCellRenderer;
import javax.swing.border.*;
import java.awt.*;
import java.awt.event.*;
public class Temp extends JFrame implements ActionListener
Container c;
Toolkit tk;
JLabel l1; int y=30;
JPanel p1,p2,p3;
JRadioButton rbByName,rbBySirName,rbByID,rbByCity,rbByState;
JButton btSearch,btView;
ButtonGroup bgSearch;
JTextField txtSearch; BoxLayout boxl;
ImageIcon i1;JScrollPane sp1;JViewport vp;
public Temp()
super("Search-Address Management System");
c=getContentPane();
tk=Toolkit.getDefaultToolkit();
setSize(1024,768);
c.setBackground(Color.BLUE);c.setLayout(null);
setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
defineComponents();
settingBounds();
addListeners();
addComponents();
setVisible(true);
public void defineComponents()
p1=new JPanel();
p1.setLayout(null);
p1.setOpaque(false);
p2=new JPanel();
p2.setLayout(null);
p2.setOpaque(false);
p3=new JPanel();
boxl=new BoxLayout(p3,BoxLayout.Y_AXIS);
p3.setLayout(boxl);
rbByName=new JRadioButton("First Name");
rbByName.setOpaque(false);
rbBySirName=new JRadioButton("Last Name");
rbBySirName.setOpaque(false);
rbByState=new JRadioButton("State");
rbByState.setOpaque(false);
rbByCity=new JRadioButton("City");
rbByCity.setOpaque(false);
rbByID=new JRadioButton("ID");
rbByID.setOpaque(false);
btSearch=new JButton("Search");
bgSearch=new ButtonGroup();
txtSearch=new JTextField();
btSearch=new JButton("Search");
TitledBorder tb=new TitledBorder("Search Criteria");
TitledBorder tb1=new TitledBorder("Search");
p1.setBorder(tb);
p2.setBorder(tb1);
public void settingBounds()
rbByID.setBounds(20,30,50,20);
rbByName.setBounds(120,30,100,20);
rbByState.setBounds(20,70,80,20);
rbByCity.setBounds(120,70,50,20);
rbBySirName.setBounds(240,30,100,20);
p1.setBounds(30,40,400,110);
p2.setBounds(30,180,400,80);
p3.setBackground(Color.ORANGE);
txtSearch.setBounds(50,210,250,25);
btSearch.setBounds(320,210,80,25);
rbByID.setSelected(true);
public void addListeners()
btSearch.addActionListener(this);
public void addComponents()
p1.add(rbByName);
p1.add(rbBySirName);
p1.add(rbByState);
p1.add(rbByCity);
p1.add(rbByID);
c.add(txtSearch);
c.add(btSearch);
c.add(p1);
c.add(p2);
bgSearch.add(rbByID);
bgSearch.add(rbByName);
bgSearch.add(rbBySirName);
bgSearch.add(rbByCity);
bgSearch.add(rbByState);
public void drawtable()
JTable t1=new JTable()
public Class getColumnClass(int column)
return getValueAt(0, column).getClass();
if(y==30) //as temporay variable only to add the scrollpane once
sp1=new JScrollPane(p3,JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED,JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
sp1.setBounds(30,300,660,380);
c.add(sp1);
JScrollPane sp=new JScrollPane(t1);
sp1.getViewport().setOpaque(false); // to make the scrollpane transparent but not worked
sp.setMaximumSize(new Dimension(600,100));
p3.add(Box.createRigidArea(new Dimension(600,20)));// invisible filler to add space between two tables
p3.add(sp);
p3.revalidate();
y=y+110;
public void actionPerformed(ActionEvent e)
if(e.getSource()==btSearch)
drawtable();
public static void main(String args[])
new Temp();
}Please reply with the code required to be added.the problem is the same that firstly i want to make the panel invisible.If I remember you other postings I think you mean to say transparent, which means the background of its parent component will be painted. If you make the panel invisible, then all the component added to the panel will also be invisible.
You have a structure something like this:
main panel
- scroll pane
- viewport
- table panel
- table1
- table 2As you where told in one of you many other posting on this topic, if you want the background of the main panel to show through then you need to make all the component on top of the pane non-opaque, not just the viewport. So, the scroll pane and table panel also need to be changed.
And don't forget to reply to all your other postings on this topic stating that those postings are "closed" so people don't waste time answering in those postings. Keep the conversation in one posting so everybody knows what has been suggested. -
In web dynpro i want explanation/definition for the following things
Hi dudes,
I want explanation *** definition for the following
(1) web dynpro
(2) Cardinality
(3) methods
(4) Nodes
(5) Attributes
(6) Interface
(7) Views
(8) Windows
(9) Mapping
(10)Binding
(11)Model
(12)ControllerHi,
Here are the defintions for the terms you hav requested-
Web Dynpro Architecture
Definition
Web Dynpro is the SAP NetWeaver programming model for user interfaces (UIs).
The Web Dynpro model is based on the Model View Controller paradigm, and has the
following features that build on the classic dynpro model:
Clear separation of business logic and display logic
Uniform metamodel for all types of user interfaces
Execution on a number of client platforms
Extensive platform independence of interfaces
Web Dynpro provides support for developing Web representation of a business application.
You use specific tools to describe the properties of a Web Dynpro application in the form of
Web Dynpro metadata. The necessary source code is then generated automatically and
executed at runtime. In addition to the events offered by the framework, you can also define
your own events for a Web Dynpro application. However, the event handling must always be
programmed in separate source code areas which are executed automatically when the event
is triggered at runtime.
In Web Dynpro, each user interface is always made up of the same basic elements. These
elements of the metamodel can be statically declared using Web Dynpro tools.
It is also possible to implement elements of the metamodel at runtime and to change them or
reintegrate them at runtime. Using these implementations, you can make any changes or
enhancements to a user interface that has been created by declarative methods by
generating new interface structures at runtime.
This means that you can combine declarative processes and the implementation of source
code.
A Web Dynpro component is a reusable entity. It summarizes all components that are
required as part of this programming unit for an executable Web Dynpro application.
The Web Dynpro component concept offers a number of advantages:
Structuring of the programming
Creation of easily manageable application blocks
Reusability of whole components
Decoupling of software projects in both time and space
The Web Dynpro component contains any number of windows and views and their
corresponding controllers. Additional Web Dynpro components can also be referenced.
View
A view describes the layout and behavior of a rectangular area of a user interface.
Every Web Dynpro application has at least one view. The layout of a view is made up of
different user interface elements, which can be nested in each other. The positioning of
interface elements in one view is supported by the supplied layout variants.
In addition to the visible part, the layout, a view also contains a controller and a context. The
data to which the elements of the view can be bound are stored and managed in the view
context, enabling them to be represented or used on the screen. The view controller can
contain methods for data retrieval or for processing user input.
Window
A window is used to combine several Views and View Sets (the concept of view sets is only
offered in Web Dynpro for Java). A view can only be displayed by the browser if it has been
embedded in a window. A window always contains one or more views, which are connected
by navigation links. One of these views, or a view set, is specified as the start view and is
displayed the first time the window is called.
Windows have inbound and outbound plugs.
Inbound Plugs and Outbound Plugs
A window has one or several inbound or outbound plugs. Using these plugs, a window can be
included into a navigation chain. The concept of these plugs corresponds to the concept of
the plug for a view. Each plug of a window is visible within the entire window and can be used
for navigating within this window. In addition, one or several plugs can be made accessible to
the component interface so that they are visible even beyond the limits of the component in
question. They thus belong to the interface view of the relevant window.
They are used to navogate from one view to other and pass the data between the views. Which view to be called next from current view - the flow of views is descriebd here using Plugs.
Controller
Controllers are the active parts of a Web Dynpro application. They define how the user can
interact with the Web Dynpro application. The data that a controller can access is defined in
the corresponding context. Different instances of controllers and contexts exist within a Web
Dynpro application.
View Controller
Each view has exactly one view controller, which processes the actions performed by the user in the view.
A view also has exactly one view context, which contains the data required for the view.
Interface Controller
Each Web Dynpro component contains exactly one component controller. This controller is a
global controller that is visible also outside the component. It is thus part of the interface of a
Web Dynpro component.
Context
Definition
The data used in the component or in the view are stored in the context. Read-write access to
this data is available using the controllers as a starting point.
Structure
The data from the contexts is managed in a hierarchical structure. Each context has a root
node, underneath which the individual data fields (attributes) are stored in a tree structure.
You create this tree structure according to the structure of your application.
CONTEXT is generally called as a ROOT Node.
Each context has nodes and attributes also.
Cardinatlity
Each node contains data fields that represent one of the following:
u2022
An individual instance of an object type
u2022
A table of instances.
This property of a node is known as its cardinality. The following table summarizes the
possible cardinalities for a node:
Cardinality Description
1:1 The node contains only one element instance, which is instantiated automatically.
0:1 The node contains only one element instance, which must not be instantiated.
1:n The node can contain multiple element instances, of which at least one must always be
instantiated (and is instantiated automatically).
0:n The node can contain multiple element instances, of which none have to be instantiated.
Further information about this and other properties of context nodes is available in the section
Context-Nodes: Properties.
Recursion Nodes
Dynamic node nesting is possible within a context, creating what is called a recursion node.
The node that is used for recursion is always a predecessor of the new node. The newly
created recursion node is a reference to a predecessor node and therefore cannot be
processed separately. Instead it takes on the structure of the node to be repeated.
Data Binding and Mapping
Within the Web Dynpro architecture, the contexts of the different controllers can be linked in
different ways:
u2022
A UI element of the user interface of the view can be linked with an element of the view
context.
u2022
A mapping can be defined between two global controller contexts, or from a view
context to a global controller context.
The context of a global controller can be linked to a Web Dynpro Model.
Defining Mapping Between Two Contexts
The elements of a view context can be locally defined. In this case (represented in the graphic
below as a "Local Node"), all the contained attributes are only visible within the relevant view.
When the view disappears, the attribute values are deleted.
Event
The component controller allows you to create events.
Events are used to communicate between controllers and enable one controller to trigger
event handlers in a different controller.
Cross-component communication can be implemented using the interface controlleru2019s events.
Events that were created in the component controller are visible within the component only.
Inbound Plugs
Inbound plugs in a view also react like an event. Therefore, when a view is called using an
inbound plug, the event handler that is optionally available for the inbound plug is always
called first. In this case event handling takes place within the current view controller.
UI Element Events
Some UI elements, such as the Button element have special events that are linked with user
actions. These events are predefined and have to be linked with an action at design time.
Actions for UI Element Events
Some UI elements such as the button element can react to a useru2019s interaction: clicking on
the corresponding pushbutton can trigger a handling method to be called within the view
controller. Such UI elements are equipped with one or several general events, which can be
linked with a specific action at design time (switching to a subsequent view, for example). If
such an action is created, an event handler method for this action is created automatically. In
this way, you can equip a UI element event (which has been inserted several times into a
view) with different actions as necessary. The event is then processed by the corresponding
event handler depending on the action that is linked.
Interfaces of Web Dynpro Components
Each component has an interface in order to enable communication between Web Dynpro
components and to enable a component to be called up by a user. This interface consists of
two parts:
Interface View of a Window Contained in a Component
The interface view of a Web Dynpro window is used to link a window with a Web Dynpro
application that can be called by the user.
Reward if helpful.
Best Wishes,
Chandralekha -
Where is the code for the collapse button in the default SAP iview layout?
I need to eliminate the collapse/restore button displayed on each iView tray. I was looking at the default layout component (com.sap.portal.layouts.default) but I could not find the code for the tray. The code for "FullWidth.jsp" (this file that implements the "FullWidth" component) is below:
<%@ taglib uri="prt:taglib:com.sap.portal.reserved.layout.TagLibHtmlb" prefix="hbj" %>
<%@ taglib uri="prt:taglib:com.sap.portal.reserved.layout.TagLibLayout" prefix="lyt" %>
<lyt:template>
<hbj:content id="myContext" >
<hbj:page title="Portal Page">
<lyt:container id="column1" />
</hbj:page>
</hbj:content>
</lyt:template>
as you can see, there is no reference to the tray tags.
note: I am familiar with how to create a new iView tray using the new Layout Tag Library (from blog below)
EFP: Layout Tag Library
, but I want am not interested in this approach... All I want is to modify the EXISTING tray.Hi,
may be it's helpful for you.
http://blog.flexexamples.com/2010/05/18/changing-the-background-color-of-a-disabled-spark- textarea-control-in-flex-4/
Regards
-Bechar -
Required the transaction code for the user exit
Hi Abap Gurus,
i want to find out the *sap transaction code for which the user exit belongs to from the below code i am getting the enhancement name and the type.
i want to know the transaction code for exit EXIT_SAPLMEKO_002 and EXIT_SAPLFYTX_USER_001
data: begin of it_modsap occurs 0,
name type modsap-name,
typ type modsap-typ,
member type modsap-member,
end of it_modsap.
type-pools:slis.
data:wa_layout type slis_layout_alv.
data:it_sort type slis_t_sortinfo_alv.
data:wa_sort like line of it_sort.
parameters:p_exit type modsap-member.
select * from modsap into table it_modsap where member = p_exit.
read table it_modsap index 1.
select * from modsap into table it_modsap where name = it_modsap-name.
wa_layout-colwidth_optimize = 'X'.
wa_sort-fieldname = 'NAME'.
wa_sort-tabname = 'IT_MODSAP'.
wa_sort-up = 'X'.
append wa_sort to it_sort.
clear wa_sort.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = sy-repid
i_structure_name = 'MODSAP'
is_layout = wa_layout
it_sort = it_sort
tables
t_outtab = it_modsap.HI
The user exit EXIT_SAPLFYTX_USER_001 is trigered for the below transactions and also postings via IDOC.
'ME21' 'ME21N' 'ME22' 'ME22N' 'ME23' 'ME23N' 'ME31L' 'ME31' 'ME32L' 'ME32' 'ME33L' 'ME33' 'ME38' 'ME39' 'VL31N' 'VL32N' 'VL33N'.
This is basically used for tax calculation purposes.
The user exit EXIT_SAPLMEKO_002 is trigerred for multiple transactions of purchansing scenario.
Also use user exit for your business scenario.
Br
Vijay V
Maybe you are looking for
-
How do you save a pdf to Adobe Document Cloud from within Acrobat Pro DC?
I have a full Creative Cloud account so I now have the updated Acrobat Pro DC for both my pc and my iPhone. On my iPhone, when I opened a pdf I was given the option to save the file to Document Cloud. But on the PC, how do I open this file or others
-
My iphone 4s' screen is black, but it's still on and charging. I broke my lock screen button so I am unable to turn it off using the home button and lock button. Is there any other way my phone can restart or turn off ? Is my phone broken for sure?
-
Hi, Can a smartform output be sent directly as a mail into SAP inbox with out converting it into .PDF format? Help needed regarding this. Regards, suresh.
-
I can't make panorama works, yes from settings, yes from my panorama folder
I don't know what is the problems
-
Hello friends i create a mail editor window using Java swing components. i have a combo box in that it have the font names. when ever i change the font name it should reflect in editor its working when i select all the content if i select one particu