Want Batch mode in the Receiver JDBC adapter

Hi,
My scenario is File to JDBC . from the source file I'm getting 20 records for file. after processing by XI while inserting the records into database level but due to some problem some records are not inserting.. suppose first 5 records got successfully inserted. but 6th record due to unique contarin problem that was failed. but due to this problem remaing records are also not inserting from the 6th record onwards it was not inserting any more records .
But i want to process all the Records or If any error is there in those records i want to fail all the records. I dont want any partial posting of the data.
Plesae suggest me some solution for this.
Regards
Jain

Hi Joel,
    Already i have selected that Batch Mode in Advanced tab. my transport protocol is JDBC 2.0 .
And my SQL query is only INSERT . in the mapping i have mapped action tag to INSERT Command for inserting the rows...
     still my SQL query is inserting first 5 records only out of 20 records ... if the sixth record contain any problem the process has been terminating .
   Please suggets me some solution for avoiding those problems. if any error is there then i want to fail teh complete message otherwise process all the records.   I dont want any partial posting of the file.
Regards
Jain

Similar Messages

What are the Batch mode parameters for Receiver JDBC Adapter

Hi All,
Could some pls tell me how to set bacth mode in receiver JDBC adapter and what are its parameters and how to configure them. i beleive there is something like max count parameters etc..
Regards,
Xier

Hi,
Check this for more info
http://help.sap.com/saphelp_nw04s/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
Regards
Seshagiri

QUESTION abt "SQL_DML" of the Receiver JDBC Adapter

HI ALL,
i hav a doubt abt "SQL_DML" of the Receiver JDBC Adapter.
i wanna use two SQL Statements in the "SQL_DML" structure to manipulate two tables.
i.e.
<root>
<stmt>
    <Customers action="SQL_DML">
      <access>
                      INSERT INTO Customers VALUES (u2019$NAME$u2019, u2019$ADDRESS$', '$KEYFIELD$u2019);
                      INSERT INTO Companys VALUES('$NAME$')
      </access>
      <key>
        <NAME>Company</NAME>
        <ADDRESS>Street 3 </ADDRESS>
        <KEYFIELD>CO</KEYFIELD>
      </key>
    </Customers>
</stmt>
</root>
BUT i cant ascertain if it permit like this writting above ??
Requset help in this regards.
Thx in advance.
brian

Hi,
You need to have two different statements. Each for one insert query. Your query will come under access tag and palceholders under kay tag. Action will remain same as you have given, but under both statements.
Ex:
<root>
<stmt1>
<Customers action="SQL_DML">
<access>
INSERT INTO Customers VALUES (u2019$NAME$u2019, u2019$ADDRESS$', '$KEYFIELD$u2019);
</access>
<key>
<NAME>Company</NAME>
<ADDRESS>Street 3 </ADDRESS>
<KEYFIELD>CO</KEYFIELD>
</key>
</Customers>
</stmt1>
<stmt2>
<Customers action="SQL_DML">
<access>
INSERT INTO Companys VALUES('$NAME$')
</access>
<key>
<NAME>Company</NAME>
</key>
</Customers>
</stmt2>
</root>
Hope this helps.
Regards,
Siddhesh S.Tawate
Edited by: siddhesh tawate on Apr 24, 2009 8:10 AM

Error in the Receiver JDBC Adapter

Hi Guys,
Iam getting the below given error when trying to insert the data into the Legacy DB...
2006-06-20 01:16:25 Error Unable to execute statement for table or stored procedure. 'Table_Name' (Structure 'STATEMENT') due to java.sql.SQLException: ORA-01861: literal does not match format string
2006-06-20 01:16:25 Error Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'Table_Name' (structure 'STATEMENT'): java.sql.SQLException: ORA-01861: literal does not match format string
Can anybody tell me what the error is ?
Regards,
Kittu.

Kittu,
this is how your Target Datatype should be,
<nr1:MT_tablename xmlns:nr1="urn:XXXXXX.XX.yyyyy">
<StatementName>
<dbTableName action=INSERT>
<table>TABLENAMETO WHICH INASERTING DATA</table>
<access>
<ts_matl>2006-06-14</ts_matl>
<no_matl>M181127</no_matl>
<qt_do>1</qt_do>
</access>
</dbTableName>
</StatementName>
</nr1:MT_tablename >
Regards,
Bhavesh
Message was edited by: Bhavesh Kantilal

RECEIVER JDBC ADAPTER----ROLLBACK IN XI

Hi Gurus,
I have a scenario with the receiver as JDBC adapter.If there is any error in updating to Database during the interface flow,how do Rollback occurs in XI???
Please help......
Regards,
Sriparna

Hi Sripam1,
select SQL statement 'batch mode' ,
i.e,
see
8. Defining Parameters in Advanced Mode
6. If you want to collect SQL statements in a batch, select Batch Mode.
of the SAP online help
[Configuring the Receiver JDBC Adapter|http://help.sap.com/saphelp_nwpi711/helpdata/en/48/465581929734d9e10000000a42189d/content.htm]
Also ensure that 'Database Auto-Commit-Enabled (No Transaction Handling)' is not enabled.
Regards
Kenny

Specify Keys in Data Type for receiver JDBC adapter

Hi guys,
I have the following issue:
In a proxy to JDBC scenario, I want to specify somehow the key values for the SQL statement in the data type that I define for the receiver JDBC adapter. Thus, I am using the following structure in data type:
root
    Statement
           dbTable
           action
           table
           access
                  CustomerID
                  Name
                  HouseNo
           Key
                  CustomerID
But in the SQL statement that is produced (I can see that in RWB, CC Monitoring, Audit Log), the "Key" segment is translated into "OR". E.g. UPDATE_INSERT ("A100" "Evaggelos Gkatzios" "El Alamein 19") OR ("A100")
Do you have any ideas ?

Hi,
Its clear from the statement in RWB (in CC monitoring's auditlog) you are using UPDATE_INSERT as the action.
Please correct me if this is OK. Now the interpretation of input xml file will be like this,
If the input XML is in the following format
<root>
<Statement>
<dbTable action=UPDATE_INSERT>
<table>EXAMPLE</table>
<access>
<CustomerID>ABC</CustomerID>
<Name>xyz</Name>
<HouseNo>123</HouseNo>
</access>
<key>
<CustomerID>DEF</CustomerID>
</key>
</dbTable>
</Statement>
</root>
Resultant SQL after parsing the XML file will be,
1. It will first check with the condition WHERE CustomerID = DEF. If it finds the record with this condition then it will update the record with CustomerID=ABC, Name =xyz & HouseNo=123.
2. If it doesn't find any record with that CustomerID then, it will insert a new record with the same details.
In auditlog, you will find two SQL statements like,
1.UPDATE EXAMPLE SET CustomerID=ABC, Name =xyz & HouseNo=123 WHERE CustomerId=DEF
2.INSERT INTO EXAMPLE VALUES(ABC,xyz,123)
hope this has given clear information about your query,
Regards,
Soorya

Table name in Receiver JDBC Adapter

Hi All,
I am using receiver JDBC adapter.
But table name consist of " like BPC."#II" .
After mapping table name becomes BPC."#II" .
I am getting error while pulling data from DB.
Is the table name creating a problem.
Please remedy of this if you have come across such scenario.
Regards
Piyush

Hi Piyush,
All that i could get from the SAP Help regarding JDBC Adapters are these links where i never found anything much regarding the table name.anyways just go through these links and see if you find anything useful.
http://help.sap.com/bp_bpmv130/Documentation/Planning/XIUnicodeGuide030411.pdf
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm">Configuring the Receiver JDBC Adapter</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/406642ea59c753e10000000a1550b0/content.htm">Mapping Lookups</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/22/b4d13b633f7748b4d34f3191529946/content.htm">JDBC Adapter</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm">Configuring the Receiver JDBC Adapter - part 2</a>
This is all i got from the help files, anyways you can also go through those links and see if you find anything else useful.
- Escape Symbol for Apostrophe
The apostrophe character () is a reserved character in SQL syntax and is therefore replaced by an escape character if it occurs within value strings. This replacement character can be database-specific. Typical replacement characters are \ or (default value). If a character occurs that is invalid for the database being used, the adapter triggers an error message (an SQL exception) concerning the SQL syntax that is generated by the database.
- Column Name Delimiter
Depending on the database being used, column names can be enclosed by a special delimiter character, for example, if the names can contain special characters (such as ). This character can be specified at this point. The default setting is no delimiter character. If a character occurs that i
Also check if there are notes in the service market place related to the same.
Regards,
abhy
Message was edited by: Abhy Thomas

How to handle BLOB field in receiver JDBC adapter into ABAP table

Dear Experts,
I am working in a synchronous scenario with Sender ABAP Proxy to Oracle Database as receiver via SAP PO 7.4.I will be calling a stored procedure view with fields ID, NAME,Age,*** and BLOB (Image binary).
1. The response from Oracle Database field BLOB is to be stored in ABAP table.Would I have to write any JAVA program to read the BLOB or the receiver JDBC adapter will handle it and store in a table by using ABAP proxy once it reaches ECC.
2. If yes, would the JAVA program have to deal with other 4 fields.
3. Can I use a UDF mapping to this BLOB field.
Regards
Rebecca...

Dear Praveen,
Thanks for your response...
Please correct me if I am wrong.
1. For 1-1 response mapping for BLOB field, I will use just use the below UDF code.
public static byte[] hexStringToByteArray(String s) {
            int len = s.length();
            byte[] data = new byte[len / 2];
            for (int i = 0; i < len; i += 2) {
                        data[i / 2] = (byte) ((Character.digit(s.charAt(i), 16) << 4)
                                                                                     + Character.digit(s.charAt(i+1), 16));
            return data;
2. ===Using the byte data, create binary attachment in mapping for abap proxy response===
Could you please share how to create the binary attachment.. I am not clear
Regards...

Receiver jdbc adapter:how to implement the insert or update action in a sql

Hi,gurus:
I'm using receiver jdbc adapter now.
You know, we have to gave the action the value 'update' or 'insert',but in our case,the action is variant--update or insert.It decides whether the record exists in the outer database.
Can stored procedure do this?If I use stored procedure,then must I create a stored procedure in the outer database?
Or some other ways to solute my issue?
THanks in advance.

Hi
Use Action UPDATE_INSERT .
This action check if a record exist with same key value then update that record. In case no record with key value found in database then record inserted to database.
look receiver structure
http://help.sap.com/saphelp_nw2004s/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm

FCC Parameters are required in the Receiver File Adapter

Hi ,
   Sorry for posting this question again.. my Structure is
MT_CADVICE_STRING
.     . Batach -
1:Unbounded (Node)
.     .      .Header_String -
1:1
.     .      .Line_Item       -
1:Unbounded (Node)
.     .      .      .LineItem_String -
1:1
for this structure I'm geting data in the XML format.. .. my scenario is simple File to File scenario.. now i want to convert this XML to a normal Text file by using FCC in the Receiver file adapter..
and in the Receiver side   i want the file in the bellow format: (each field i want to get in the separate line but at presnt I'm getting the continution of all lines I'm not getting the data in a separate lines..)
Header_string
LineItem_String
LineItem_String
Header_String
LineItem_String
so, any abody can help on this...
And in the Receiver Communication channel i keep the FCC parameters like as bellow :
RecordsetStructure : Batch,LineItem
Batch.fieldSeparator: 'nl'
LineItem.fieldSeparator: 'nl'
Batch.endSeparator: 'nl'
LineItem.endSeparator: 'nl'
For more information.. My source file is like bellow
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:MT_CADVICE_STRING xmlns:nr1="urn:Test.com:SD:CAdvice">
- <Batch>
<Header_String>1 B 1110300014200804108218 36892.80 03 10.000 10.000 0.00 0.00 008000021720080410558000.00 91958.40 649958.40 0.00 649958.40 2678.40 1000003461100000346110000034611000003461123456 18 18 0.00 $</Header_String>
- <LineItem>
<LineItem_String>2 B 1110300014 1 000000000001234567000000000001 5.000 0.00 45000.00 10800.00.00 16.00 279000.00 0.00 rcl/ML0080200804100000000357 200804100.00 01 02 000000002.00 860.13321.00 $</LineItem_String>
</LineItem>
- <LineItem>
<LineItem_String>2 B 1110300014 2 000000000001234567000000000001 5.000 0.00 45000.00 10800.00.00 16.00 279000.00 0.00 rcl/ML0080200804100000000357 200804100.00 01 02 000000002.00 860.13321.00 $</LineItem_String>
</LineItem>
</Batch>
</nr1:MT_CADVICE_STRING >
Regards
Jain

Hi jain
Provide as below definitely it will work,
RecordSet Structure : batch,Line_Item,LineItem_String
batch.fieldSeparator        ---      'nl'
Line_Item.fieldSeparator -
     'nl'
LineItem_String.fieldSeparator ---   'nl'
All your fields will come in a separate line.
Regards,
Sasi
Edited by: sasitharan on Jul 28, 2008 11:36 AM

When would you write a stored procedure in sender/receiver jdbc adapter

Hi Everybody
Can you tell any situation where you would need to write a stored procedure in the query sql statement of sender/ receiver jdbc adapter instead of writing SELECT statement there
why do we need to write stored procedures
thanks and regards,
Anitha

Hi Anitha,
why do we need to write stored procedures
Some times a single SQL statement will not suffice for ur transactions....
Say u want to access from 2 tables and update based on some condition..
or nested select statement...
or u want to update a 2 nd table based on the values from 1st table... etc..
In those places it's preferable for going for a Stored Procedure.
The Stored Procedure can be used in both Sender and Receiver JDBC Adapter.
Still nt clarified do post..
Babu

Joins implementation receiver Jdbc Adapter

Hi All
I need some suggestions on the following scenario
Updation of a flag in a table where the column names in the WHERE clause are from two different tables in the same database.
i.e
UPDATE T1
Set T1.flag =1
where T1.columnA=value1 and T2.columnB=value2
where T1 and T2 are two different tables in the same database,
I want to accomplish this directly using UPDATE in JDBC receiver by using JOIN query in the structure.
kindly reply
thanks
sd

Hi Sd,
You can execute an SQL statement directly in your Receiver JDBC adapter.
Check this link for that,
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
Check the part for STATEMENTNAME6 and also the example for that in the same link,
Regards,
Bhavesh

Structure for Receiver Jdbc adapter for multiple tables

Hi,
For Receiver JDBC adapter,Standard structure
structure as
Statement
   Tablename(TABLE1)
        Action
        Access
Can i make a structure like
Statement
     Tablename(TABLE1)
        Action
        Access
            fields....
     Tablename(TABLE2)
        Action
        Access
            fields......
As i am using tables and I want to insert or update both of them or one based on some conditions.
Will Insert be possible in single Statement or I have to create separate statements for each table. Can you please help me on this?
Thanks in advance
Best Regards,
Harleen Kaur Chadha

Hi Harleen,
        As already said by Dharanveer, all that you need to do is replicate the Statement level, so, istead of using this structure:
Statement
Tablename(TABLE1)
   Action
   Access
     fields....
Tablename(TABLE2)
   Action
   Access
     fields......
        You will construct something like this:
Statement1
Tablename(TABLE1)
   Action
   Access
     fields....
Statement2
Tablename(TABLE2)
   Action
   Access
     fields......
       And this structure will be created in a single Data Type, that will be used to create a single Message Type, that you will use in your Message Mapping, and, the 2(or more tables that you need to manipulate) will be inserted/updated without problems using this approach.
       Thank you, and best regards,
       Wilson

Need to get the Mail attachment name as it is to the receiver file adapter

I am doing a Mail to File scenario. I need to get the attachment from the mail and store it on the file server. I am using the PayloadSwap bean in the sender mail adapter. My requirement is to carry forward the attachement name as it is to the receiver file adapter side and store the file with the same name.
Did any one try doing this? I was looking at developing an adapter module but got struck as I could not find whether the attachement name is stored in the XI payload after it has got swapped using the swap bean.
Any help would be appreciated.
VJ

Oops pressed the send key. Take two.
This is becoming a damn nightmare. When I run the adapter I am getting ModuleExceptions. Can you pass your eyes over these Java config settings to see what I am doing wrong. Using NWDS CE 7.1 with PI 7.1 both at SP07. All the imports were taken from PI 7.1 after SP07 was applied. The build id of NWDS is
SAP NetWeaver Developer Studio
SAP NetWeaver 7.1 Composition Environment SP07 PAT0001
Build id: 200901152336
APPLICATION.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application PUBLIC "-//Sun Microsystems, Inc.//DTD J2EE Application 1.3//EN"
"http://java.sun.com/dtd/application_1_3.dtd">
<application>
<display-name>MailPOP_EAR</display-name>
<description>EAR description</description>
<module>
<ejb>MailPOP_EJB.jar</ejb>
</module>
</application>
APPLICATION-J2EE-ENGINE.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application-j2ee-engine SYSTEM "application-j2ee-engine.dtd">
<application-j2ee-engine>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="service">engine.security.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">engine.j2ee14.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="service">com.sap.aii.af.svc.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="interface">com.sap.aii.af.ifc.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">com.sap.aii.af.lib.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">com.sap.base.technology.facade</reference-target>
</reference>
<fail-over-enable mode="disable" />
</application-j2ee-engine>
EJB-J2EE-ENGINE.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-j2ee-engine SYSTEM "ejb-j2ee-engine.dtd">
<ejb-j2ee-engine>
<enterprise-beans>
<enterprise-bean>
<ejb-name>GetMailAttachment</ejb-name>
<jndi-name>GetMailAttachment</jndi-name>
<session-props/>
</enterprise-bean>
</enterprise-beans>
</ejb-j2ee-engine>
EJB-JAR.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans
2.0//EN"
"http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<description>EJB JAR description</description>
<display-name>EJB JAR</display-name>
<enterprise-beans>
<session>
<ejb-name>GetMailAttachment</ejb-name>
<home>com.sap.aii.af.lib.mp.module.ModuleHome</home>
<remote>com.sap.aii.af.lib.mp.module.ModuleRemote</remote>
<local-home>com.sap.aii.af.lib.mp.module.ModuleLocalHome</local-home>
<local>com.sap.aii.af.lib.mp.module.ModuleLocal</local>
<ejb-class>sample.GetMailAttachment</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
</session>
</enterprise-beans>
</ejb-jar>
SENDER MAIL ADAPTER modules
1 AF_Modules/PayloadSwapBean Local EB 1
2 GetMailAttachment Local EB 2
3 sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local EB 3
1     swap.keyName          payload-name
1     swap.keyValue          MailAttachment-1
RECEIVER FILE MODULES
1     localejbs/AF_Modules/DynamicConfigurationBean     Local Enterprise Bean     1
2     localejbs/CallSapAdapter                    Local Enterprise Bean     2
1     key.0          write http://sap.com/xi/XI/System/File FileName
1     value.0          message.interface
VARIABLE FILENAME SUBST WITH ASMA TURNED ON
fName     message:interface_name
JAVA SOURCE
package sample;
import javax.ejb.CreateException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import com.sap.aii.af.lib.mp.module.Module;
import com.sap.aii.af.lib.mp.module.ModuleContext;
import com.sap.aii.af.lib.mp.module.ModuleData;
import com.sap.aii.af.lib.mp.module.ModuleException;
import com.sap.engine.interfaces.messaging.api.Message;
import com.sap.engine.interfaces.messaging.api.MessagePropertyKey;
import com.sap.engine.interfaces.messaging.api.TextPayload;
import com.sap.engine.interfaces.messaging.api.XMLPayload;
import com.sap.aii.af.service.cpa.Channel;
@ejbHome <{com.sap.aii.af.lib.mp.module.ModuleHome}>
@ejbLocal <{com.sap.aii.af.lib.mp.module.ModuleLocal}>
@ejbLocalHome <{com.sap.aii.af.lib.mp.module.ModuleLocalHome}>
@ejbRemote <{com.sap.aii.af.lib.mp.module.ModuleRemote}>
@stateless
<code>GetMailAttachment</code>
@SuppressWarnings("unused")
public class GetMailAttachment implements SessionBean, Module {
     private static final long serialVersionUID = 7612238514043673502L;
     private SessionContext myContext;
     private MessagePropertyKey myFileName;
     public void ejbRemove() {
     public void ejbActivate() {
     public void ejbPassivate() {
     public void setSessionContext(SessionContext context) {
          myContext = context;
@throws CreateException
     public void ejbCreate() throws CreateException {
     public void getMessageProperty(MessagePropertyKey FileName) {
          myFileName = FileName;
@param moduleContext
           Contains data of the module processor that might be important
           for the module implementation such as current channel ID
@param inputModuleData
           Contains the input XI message as principal data plus eventual
           set supplemental data
@return ModuleData Contains the (changed) output XI message. Might be the
        response message if the module is the last in the chain.
@exception ModuleException
               Describes the cause of the exception and indicates whether
               an retry is sensible or not.
     @SuppressWarnings("deprecation")
     public ModuleData process(ModuleContext moduleContext,
               ModuleData inputModuleData) throws ModuleException {
          try {
               Message msg = (Message) inputModuleData.getPrincipalData();
               TextPayload payload = msg.getDocument();
               String contentType = payload.getContentType();
               // Content Type could be something like
               // text/plain;charset="UTF-8";name="file.txt"
               contentType = contentType.replaceAll("\"", "");
               int i = contentType.lastIndexOf("=") + 1;
               String fileName = contentType.substring(i);
               msg.setMessageProperty(myFileName, fileName);
               inputModuleData.setPrincipalData(msg);
          } catch (Exception e) {
          return inputModuleData;
JAVA ERRORS
2009-02-04 11:41:14     Information     Mail: calling the module processor for channel LMK_Common_Mail_Sender
2009-02-04 11:41:14     Information     Swap: swapping by payload-name ? MailAttachment-1
2009-02-04 11:41:14     Information     Swap: successfully swapped
2009-02-04 11:41:14     Information     Mail: message leaving the adapter (call)
2009-02-04 11:41:14     Information     The application tries to send an XI message asynchronously using connection AFW.
2009-02-04 11:41:14     Information     Backward validation is enabled
2009-02-04 11:41:14     Error     Unable to validate the message with message ID 8702df71-f254-11dd-9b9b-001a64a73518
2009-02-04 11:41:14     Error     Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Content is not allowed in prolog.
2009-02-04 11:41:14     Error     Mail: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Content is not allowed in prolog.
2009-02-04 11:41:14     Error     Mail: error occured: com.sap.aii.af.lib.mp.module.ModuleException

Repeating structure through the receiver file adapter

I wanted to ask wheter it is possible to create repeating structure through the SAP xi receiver file adapter. What I'm trying to accomplish is this:
Item1
Item2
Item1
Item2
(variable number of times).
I can accomplish the following:
Item1
Item1
Item2
Item2
What I could do is have the Item1 and Item2 fields in the same segment in the design time, but this would mean the file adapter would write all the items on a single line instead of two.
There is no way to define line breaks between the the receiver file adapter field parameters ?
There is no way to support nested structures in the recordset definition ie. Item1.Item2 ?

Henri,
What Vishal means is following:
Add sequences of the tag <recordset> between pairs of item1, item2:
<documentName>
   <<b>recordset</b>>
     <item1>
       <field-item1>column-value</field-item1>
       <field-item1>column-value</field-item1>
       <field-item1>column-value</field-item1>
     </item1>
     <item2>
       <field-item2>column-value</field-item2>
       <field-item2>column-value</field-item2>
       <field-item2>column-value</field-item2>
     </item2>
   </<b>recordset</b>>
   <<b>recordset</b>>
     <item1>
       <field-item1>column-value</field-item1>
       <field-item1>column-value</field-item1>
       <field-item1>column-value</field-item1>
     </item1>
     <item2>
       <field-item2>column-value</field-item2>
       <field-item2>column-value</field-item2>
       <field-item2>column-value</field-item2>
     </item2>
   </<b>recordset</b>>
</documentName>
A similar problem with header and items is in this thread:
Repeating structure through the receiver file adapter
Hope that helps,
Stefan

Want Batch mode in the Receiver JDBC adapter

Similar Messages

Maybe you are looking for