Idoc didn't arrive to XI

Hi,
I am a newbie to XI.
I am trying to Send IDoc from R3 to XI.
I have configured all necessary steps like rfc dest etc.
When I am testing it using we19, it's not giving any error ...but IDoc didn't arrive to XI.
Pls help
Christy

Hi Christina,
Did you "test connection" your RFC destination?
Login to your R/3 system and
execute tcode:WE05 to see what is the "status" of the IDoc that you pushed out of R/3
Execute tcode: SM58 to check the TRFC log whether you have any entries for the IDoc you sent.
Login to your XI system and
Execute tocde:IDX5 ...If the IDoc adapter had received the IDoc then you will able to see the IDoc XML.
Regards,
Sridhar

Similar Messages

I am having a problem sending photos by way of the share facility in iPhoto. I have looked in accounts and i cloud is not listed as an option. I removed MobileMe and reloaded it and that enabled me to send the photos but then the email didn't arrive

When I first tried to email photos from the share facility of iPhoto 9.2.3 I received a message something along the lines of server didn't recognise your id and password. Read other peoples posts that suggested removing and reloading icloud in the iPhone account section. No icloud in my accounts just email and mobile me so I removed and reloaded mobile me. After that I sent a test email to myself. It arrived eventually but disappeared the instant I tried to open it. Shut down my Macbook completely and then switched it on again with exactly the same results. I am using OS X 10.7.4. Can anyone tell me how to get icloud as an option for my iPhoto emails? I use icloud for my normal emails.

I've resolved my problem now. It wasn't iphoto: preferences:@ that I needed but iphoto:preferences:general where there is the option to choose email for sending photos. Can't believe I missed that before.

Flat File to IDOC- didn't get data into IDOC

Hi All,
Our scenario is Flat File to IDOC....
working fine... didn't get any errors... IDOC also generated but didn't get any data in that IDOC....
for details see the attachment...
Thanks In Advance,
vishnu.........

Hi Rajesh,
I am getting payload in RWB from sender Cc like below:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_File xmlns:ns="http://mouritech.com/file2idocsender">
- <MT_File>
<Value>1</Value>
<Reason>test</Reason>
</MT_File>
</ns:MT_File>
If i test with this payload in mapping i am getting a pop up with this message and mapping not completed ...
Could you please let me know what i have to do now?
Pop Up:
The processing instruction target matching "[xX][mM][lL]" is not allowed.
See error logs for details

Why IDocs are not arrived from Source System

Hi all,
Now a days we are facing regular problem to load master data?
We are getting Error Message - "No Idocs arrived from the Source system".
I need to know, Why this error will be occurred?
Is there any reason for this Docs are not arrived from the Source System?
Please help me to analyze this error, why its happened regularly? what could be possible reasons for this error?
Its very urgent, please help me as early as possible.
Thanks in Advance. I will asign the points for relevent answers.
Regards,
Sudharsan Reddy.

Hi ,
SOME OF THE CHECKS:
1.You can check the RFC destination using the transaction SM59 in the system. Then do Test connection and this should not cross more than 1000ms. The connection should establish within 1000ms.
If it crosses more than 1000ms the tRFC entries will not be cleared fast.There will not be any job to push Transaction recorded entries it will go through SMD(Shared Master Data) Tool.
So if it crossed more than 1000ms, then you can ask your Basis team to check the network connectivity b/w R/3 and BW system.
If there is no serialization for these IDocs then you can use button F6 to process these entries in tRFC manually.
2.Go to SM58 and check the LUW .If any error ..then selecting the failed Idoc, click edit in the menu and execute LUW.
3.If there are many Idocs with status red then check the system performance also. If performance os the system is bad then, we can put the mail to basis guys they will check and restart the BW system. (or) it may be due to problem in the coding,since data transfer is taking long time.
4. Some times it may be due to much parallel process at the info package level and make the Max parallel process into one process in RSCUSTV6, save and run the infopackage. This may be due to space problem.
( Or )sbiw>general settings>maintain control parameters for data transfer. Both in BW and R/3 we configure in the same way.
There we need to give
1.source Sys name
2.Maximum KB in one data package.
3.Maximum lines in one data package.
4. Frequency (specifies after how many no. of data records, status record should be sent)
5. Max processes ---Reduce the number process, save and try.
6.Target Sys name.
Regards,
Dhanya.

Info IDoc : sent, not arrived ; Error passing data to port

Hi Folks,
While I am loading the data from R/3 I am facing the following error in Production..
Info IDoc 2 : sent, not arrived ; Error passing data to port
when I checked in SM59 every thing seems fine like RFC test connection and authorization check
In BW is check the Source system saying it is Ok.
Only the thing I found here is in TRFC, it is error when opening RFC Connection.
but it is different in SM59 saying every thing is ok, as said above..
Please help me in this regard
thanks masters
DJ

Srinivas,
Thanks for your prompt reply..
user : ALEREMOTE and password are fine..
As told I check st22 and sm21 in both sytems, no sort dumps I found..
Please help me its an urgent..
thanks
DJ
Message was edited by:
Jangareddy dasari

BB won't honor the $200 trade if your phone didn't arrive by the 17th?

People are reporting all over social media that BB stores are denying people who preordered the note 4 the $200 trade in if their phone didn't come in on launch day??????
Well that is 99% of us.
If this is the case, this is the most dishonest thing I have ever seen from a major retailer. I was specifically told (per the trade in details) that the preorder must be placed in the time line (9/19/14-10/16/14). No mention that the phone must be received on the launch date to be able to use the $200 trade in promotion.
Can a BB rep please respond to this and give us accurate and reliable information?
We have been mislead by so many BB employees throughout this entire preorder experience it is mind blowing.
Thanks....

Hello again thegipper-
It is never our intention to mislead customers regarding the availability of products. However, vendor agreements and product availability to influence what information we can give to customers.
A pre-order with Best Buy does not guarantee availability of that item on release day, it simply guarantees that you will have first crack at the product as we receive them from the manufacturer. As this availability can be influenced by vendor agreements, product availability and shipping issues, we are not able to guarantee release date availability. I apologize if you were given any information that we would promise that you would have your phone on the release date or for any incorrect information we supplied about the release date of the Verizon version. We have no control over release dates being changed.
I’m truly sorry that you have not received your pre-ordered phone yet. Best Buy continues to work with Samsung to get more inventory so that we can fulfill those pre-orders as quickly as possible.
Thank you for your patience during this process.
Bill|Senior Social Media Specialist | Best Buy® Corporate
Private Message

My iPhoto book didn't arrive

I have made and paid for an IPhoto book- delivery date was 16th August - but as of todays date it han't arrive.
Is there an email to contact to report this?

The email order confirmation should contain a link to "report a problem".
Otherwise check the Order Status link on this page: http://store.apple.com/us/help/print_products

Config event generator to log when file didn't arrive at certain time?

hi everyone
is it possible to configure a file event generator to write a log if certain files did not arrive at pre-defined time? or any event generator to log if certain events did not happen at specified time? thanks in advance.
Message was edited by chendongtom at Sep 13, 2004 10:23 AM

Hi,
I don't think, it is possible.
What you can do is:
Don't use file EG, but a timer EG, which kicks off a workflow, using a file control to look for/read in/.. the file and do some reporting afterwards.
You do not have to kick-off the workflow at the exact time, but also can do it 2 hours (for example) before and use a timer inside the workflow for watching a time period for the arrival of the file.
Keep in mind that WLI timers are not 100% exact because they are JMS based, so it is guranteed not to be started before, but can start a little bit later than start-time.
If you are using already a scheduling system like Control-
M, you can also leverage this to start the workflow.
-Kai

Sent Yoga 2 Pro in for repair. Fedex shows delivered, but Lenovo says it didn't arrive?

I recently opened a support case for my Lenovo Yoga 2 Pro which was rebooting with BSODs due to a hardware malfunction.
Case ID: 8004208471
I shipped the laptop on Nov. 28th and Fedex tracking shows that it was delivered on Dec. 2nd. However, today the Lenovo Repair Status shows that the laptop still has not reached the repair center. Admittedly, when I sent the laptop I goofed and forgot to include the Inventory Control Sheet so this may be part of the delay.
I called back into Lenovo support yesterday to express my concern and also told them that I forgot to include the ICS. They stated they would have someone call me back. It's only been 24 hours, but I have not heard back and I hear stories of Lenovo support promising call-backs that are never made. I just want to get confirmation that my laptop has been located at the repair center and isn't "lost" in the center.
How long from receipt of the laptop does it usually take the repair center to update the Lenovo repair status with "laptop received"? Any help on this would be greatly appreciated.

I actually sent my Yoga 2 Pro in for repair a couple of weeks ago. It is still being repaired. It was delivered by FedEx on 11/19/14 at 11:00 am, and the Lenovo Repair Status updated to show that it was received on 11/20/14 at 11:54 am. It took just over one day to update. The reason why it has taken two days is probably because of the missing inventory control sheet. Hope that you don't have any more problems!

Free iphone cover programme - didn't arrive

Hi I ordered a cover from the free programme back in September, with expected delivery in October. I still haven't received the cover, who do I contact? There is no link to follow to report a problem on my tracking.
Thanks

You can check your order status here - https://store.apple.com/Apple/WebObjects/OrderStatusUK?sf=uk . There is also a phone number on that page if there is a problem with your order.

Why does the OS X Mountain Lion Up-to-Date Program email didn't arrived?

I ordered Mountain Lion yesterday!

Server perhaps overloaded?
I say give it until the weekend for the code and if not, call into Apple.

Error in Sending IDoc to XI

Hi Gurus,
We are not being able to send Idocs from one of our Back-end SAP system. The Idoc status in we05 is successful but it doesn't reach XI. So we checked in SM58 in the Back-end R/3 system and there it shows the error:
No Service For System SAP*** , Client *** in Integration Directory
We tried almost every possible setup
-The System is defined in SLD and has the logical system name.
-The Adapter Specific Identifiers are correct for the corresponding business system in ID
-The RFC destination in R/3 system is defined.
- Read through other similar threads in SDN about the similar problem.
Do anyone have a more definite solution for this particular problem? The other R/3 systems are connected to XI system and all IDocs from those systems are arriving at XI.
Waiting for your valuable advices!
Regards,
Suddha

Hi All,
We had eventually found the solution to this problem we were facing in sending IDoc, though I couldn't manage to update the thread with the solution. I think this would be a very helpful information for those who face similar problems.
Let me describe the scenario first briefly,
We are sending an IDoc (Idoc extension), from SAP system to XI and then send the XML payload as mail attachment to the receiver via receiver mail adapter. Since this is a cross company transaction, hence we have configured the scenario as a B2B in ID, which means we use Parties for both the sender and receiver.
Now in the ID we had done all necessary configurations and used parties and services under Party. For the sender SAP system we assigned a Business System to Sender Partner, configured the Party Alternative Identifiers correctly. The ports were created in IDX1.
On the other hand the SAP system was also configured successfully - including Partner Profile, Distribution List, RFC destinations and ports.
In SLD we created Business System for the SAP system and in ID the Business System under party had the correct logical system name as Adapter Specific Identifiers.
But after all these, the IDoc was not arriving at XI, though in R/3 the status of the IDoc was 03 in we02. When we checked in sm58 in R/3, it showed us the error message that "No Service For System SAP*** , Client *** in Integration Directory".
The cause to this problem was:
We created (assigned from SLD) Business System only under Party (Sender), as this was a B2B scenario, and didn't create (assign) a Business System without Party, as we didn't need one at all in the scenario configuration. And this the reason behind this error. When an Idoc arrives at XI, before the Inbound IDoc adapter converts the IDoc to IDoc XML using IDoc metadata............it checks in Configuarion to see if any Service without Party (Busniess System) is defined for the Sender SAP System and Client (The SNDPOR and MANDT field values from IDoc Control header are taken as the SAP SID and Client). If it finds one it accepts the IDoc and starts the Normalization (Sender Party, Service......in the message header) and IDoc to XML conversion. If it cannot find an Service without Party in ID for sender system, it rejects the Idoc with the error message that we saw in sm58 in backend R/3 system.
In this step the Service under Party doesn't help, because at this point the Inbound IDoc adapter can not deterimine the sender party.
Hence for sending an IDoc from an SAP system to XI, we need to have an Service Without Party in ID, whether or not we require it in our actual Scenario Configuration, which is ofcourse not a case for the Reverse Scenario, ie Sending an IDoc into SAP system from XI.
This is the similar with BC adapter as well. I was already aware about this behaviour of BC adapter from my past experience and this actually helped to troubleshoot this IDoc adapter problem.
This was ofcourse a useful and new learning for me and hope would be helpful to others as well. Let me know if anyone has any doubts on this.
Regards,
Suddha
Edited by: Suddhasatta Guha on Aug 28, 2008 1:03 PM

HTTP Adapter Receiver -- Message not arrive

Hello,
i send an IDoc from an SAP System to the PI and then with the HTTP Adapter
to a non SAP System.
The Message didn't arrive.
The Message Monitor says 'Call Adapter'.
Any Ideas?
Regards
Patrick

Patrick
A similar issue has been discussed here:
XI_J2EE_ADAPTER_XI_HANDLER - GENERAL_ERROR
Unfortuantely it is a gnereic error.
Try extending the trace file in the log configurator in Visual Admin to see if you can get a better indication of what is triggering the error.
Try running RSXMB_ACTIVATE_ICF_SERVICES in SE38 to see if this kicks off the Integration Engine services.
Also, check page 29 from this guide:
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF

Error sending IDOC to PI

Hi experts,
I´ve configured an IDOC to IDOC scenario.
The source system sends an IDOC to PI. The problem is this IDOC doesn´t arrive to PI (no message in SXI_MONITOR).
I´ve checked in the source system the transaction SM58, and I have the following error message:
Kein Service für System SAPVTQ Mandant 699 im Integration Directory
Any idea of how can I solved it?
Thanks,
Javier

Hi Pragathi,
You were right, it was because of the partner profile. I didn´t select the option Individual Processing.
Thanks for your answers,
Javier

IDoc's not received in XI

An idoc was supposed to be transferred from R/3 to XI. Status for the idoc in R/3 is 03 and SM58 does not have any entries. I have set up alert messages and didn't receive any failures.
But I don't see any idoc in XI (neither do i see it in IDX5). Please note that only one idoc didn't make it through. All other idocs before this one and after this one (on same day) made it successfully to XI. What happened to this idoc? any ideas?
thanks

Hi,
Probably due to the QRFC Queues in XI Server.The following document may help you,
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/31f90b80-0501-0010-3792-cfc64ccea91f">Tips and Tricks For Troubleshooting</a>
Regards,
JE

Idoc didn't arrive to XI

Similar Messages

Maybe you are looking for