Want claimed record not display to other user.

Hi All,
I have a use case where i have display adf table based on vo from DC.
now i want when i select some rows from table and click on button(claim) these selected record display on this user not all util user does't unclaim
record.
how can i handle this in Adf?
thanks
Manish

Hi,
you could have a view criteria added to the view object that filters the data by the value of a claim field to be the username or null. This however would only filter the information when a user performs a query. However in your post you don't mention how immediate the claim should display for other users
Frank

Similar Messages

Initiator Task not visible to other users in the Group

Hi
JDeveloper 11.1.1.6, WLS 10.3.6, BPM 11.1.1.6
I have a Process and the swimlane containing the Initiator Task is assigned to a Group.
All the users in the group are able to Initiate the Task.
But when the Task is initiated, the Task is assigned to the User specifically, but not to the Group. I guess this is the default behavior.
The Human Task Assignee - defaultPerformer for the Initiator Task is uneditable in the initiator.task file.
What I was expecting is that, since the Initiator swimlane is assigned to the Group, All the users in the Group should be able to see the Tasks initiated by anyone in the Group.
I want this behavior in the Initiator type of tasks specifically. (The normal Tasks other than Initiator tasks are working as expected.)
The reason why we want this is, let us say after the task is created, and before it is submitted, there is a lot of work to be done, for example, data entry, should be done by many people in the Group.
If all the users in the Group are able to see the Initiator Task, then it will help to share the responsibility of data entry among the users of the group.
I tried Reassigning the task to Group, and it works, but we am looking for something automatically assigning to the Group when the Process is created. (We may not be using the Oracle BPM Workspace at all).
Can anyone please tell us if there is a way to make the Initiator Task automatically assigned to the Group instead of just the user?
Thanks for any help
Sameer

Hi Ashwini
Thanks for replying.
I did the same and it was working for me even if the Type is Single.
I just gave the Group name and all users were able to see the task. This is fine with me.
I just observed one more thing.
When the task is created, all the users in the Group are able to see it in 'Me & My Group'.
But the data entered by the creator is not seen by other users.
There is an action 'Save' in the Task. If the creator clicked on it, then the task is automatically 'Acquired' by the creator.
Other users in the group are able to see the task and the saved data, but are not able to Submit.
What I expected the Save button to do is only to Save the data in the Payload. Not Claim it.
Is there a way to make the payload data only to save but not to claim the task?
Thanks and Regards
Sameer

Changes are not reflecting in other users

HI all it's urgent
One user abcd who had made some changes is not reflecting to other users after transport, we have 2 clients 100 and 200 ,changes are reflecting in own user id ,we transported with scc1 transaction
with regards
vinod

Dear Vinod,
Can you explain what did you try to do ? what changes do you make ?
Dimitry

After transport changes are not reflecting to other users

HI all it's urgent
One user abcd who had made some changes to some screens is not reflecting to other users after transport we have 2 clients 100 and 200 changes are reflecting in own user id we transported with scc1 transaction
with regards
vinod

I am not a developer, so pardon me if I misunderstood this question. I thought screens and other repository objects are client independent. That means the change should be evident in all clients without a need to transport.
Is this to do with security by any chance ( though it seems unlikely )? Can the other users see the change in the original client in which the request was made? That should help you determine whether the problem lies with the transport or outside. Also you can check the contents of the transport in SE01 and see if it holds the kind of data that you are expecting it to. I am guessing you have already generated the screen after saving the changes.
Hope this helps,
Sanket

Lion Server, SL Client - list of users not displaying - only 'other'

#1
So I've been running a SL Server at home without (many!) problems. All SL clients connected to server just fine and you always got a list of users to log in from (as you'd expect).
However, installed Lion Server from scratch on a my Mini Server (again without too much problems). All my client Macs (Macbook Air, Macbook, iMac - all core2duo etc) have been upgraded to Lion as well and they're all fine. You get a list of possible users to log on to - which is fine.
However, I have one core duo (white) 2.0Ghz iMac which (obviously) is remaining with Snow Leopard client but does not display a list of users -- just Admin and 'Other. I've triped check the settings and bearing mind this was ok with SL Server, I can't figure out why this is. I even re-installed SL client on said iMac and I still get no list of users.
I can log into the server using 'Other' i.e. specifiy full user name and password, so I know it is connecting to the lion server
So I am confused as to whether its a Client or Server problem (I presume server) -- any ideas?
#2
Less of a serious problem, I am still getting the old (SL server) welcome message on all my Lion Clients logon screen (i.e. on the list of users) - how can this be if the 'welcome to snow leopard server' has been completely erased with Lion server? (I assumed the message was stored in pram but again, zapping it, does not change it) I can't find in Lion server to config the welcome message either. Maybe zapping Pram of server? any ideas?
Thanks in advance
Rob

Hi
Managed Preferences are composited (combined) together and cached locally on client workstations. These are stored in /Library/Managed Preferences. Remove the folder and restart the workstation. Hopefully on next client login this should pick up what you've defined for MCX at User, Computer and Group level.
For your other problem on the 10.6 workstation issue these commands:
sudo rm -R -v /Library/Preferences/SystemConfiguration
sudo rm -R -v /Library/Preferences/DirectoryService
sudo rm -R -v /Library/Preferences/edu.mit.Kerberos
sudo rm -R -v /Library/Managed\ Preferences
sudo rm -R -v /Library/Caches/*
sudo rm -R -v /private/tmp/*
sudo reboot now
On successful reboot login as the local administrator and assign the workstation an appropriate name in the Sharing Preferences Pane. Make sure it's using the same NTP Server as your Server and then join it to the LDAP Server using the Accounts Preferences Pane > Login Options > Join. Hopefully this should get things back on track.
HTH?
Tony

Records not displayed in the WGBEZ field in H_T023_MEPO search help.

Hello Friends,
I have created the search help exit , in that based on the LREF3 , we have to fetch the materail groups.
1.I have written the code in the exit , in the search help exit tables parameter record_tab , the data is coming correctly
but when we run search help, the description field is not getting displayed.
I have shift 2-3 places left side as well but the description is not displayed correctly.
So how can we get the description field filled.
2. We want that the LREF3 field should come in the selection screen of the dialog box, so that user can enter the values in it.(dialog with value restriction) so i have added LREF3 field in the search help parameters but i want that
this field should not be displayed in the results of search help . Only materail group and its description gets displayed.
So can we achieve the same.
Thanks to provide answers for my above two questions.

Hi
Please go through the related pointers ->
The OSS note 672960 has already indicated you need to use BADI to address it.
For Search criteria
You can also use user-defined fields as search criteria. To do this, you have to set fields XINPUT and XDISPLAY to 'X' in table ET_FIELDS for the fields you want to use in BADI BBP_CUF_BADI_2 in method MODIFY_SCREEN. The fields defined this way are displayed if you choose the 'Extended search' link.
Re: Custom field in Create Bid Invitation..
Re: Search Help for Purchasing Group..
Re: urgent help request - How to add custom fields to header BID.
Re: New Screen with table control information in Process Bid Invitation
Do let me know.
Regards
- Atul

[Solved] nm-applet does not display in normal user's panel

I installed Arch Linux yesterday. Today, I am trying to get some of the refinements working. I installed OpenBox as a standalone window manager. I got several things working exactly the way I wanted as root, such as networkmanager, nm-applet, and pypanel. When I startx as root, the nm-applet is properly displayed in the pypanel.
Then I discovered that I could not run an X application as the normal user without first running "xhost +" as root. At this point, it dawned on me that I am not supposed to run startx as root, but as the normal user. Duh!
So, I thought I set up everything the same way for the normal user. When I startx as the normal user, OpenBox runs, nm-applet runs, and pypanel runs, but pypanel does not display the nm-applet icon. I can now run my X application as the normal user, so that is good.
My .config/openbox/autostart file is exactly the same for root and my normal user:
(sleep 3 && pypanel) &
(sleep 3 && /usr/bin/nm-applet --sm-disable) &
nm-applet was started by this code, because ps -ef shows it running and owned by the normal user:
[tim@(none) ~]$ ps -ef|grep nm-applet
tim 2311 2306 0 15:27 tty1 00:00:00 /usr/bin/nm-applet --sm-disable
tim 2332 2327 0 15:27 pts/0 00:00:00 grep nm-applet
[tim@(none) ~]$ ps -ef|grep networkmanager
root 497 476 0 14:14 ? 00:00:00 /sbin/dhcpcd -B -K -L -G -c /usr/lib/networkmanager/nm-dhcp-client.action eth0
root 869 476 0 14:30 ? 00:00:00 /sbin/dhcpcd -B -K -L -G -c /usr/lib/networkmanager/nm-dhcp-client.action ra0
tim 2345 2327 0 15:27 pts/0 00:00:00 grep networkmanager
Why does pypanel display the nm-applet icon for root but not for the normal user?
Tim (newbie to Arch but previously ran ArchBang for six months)
Last edited by ratcheer (2012-05-02 22:34:30)

I have now switched to tint2 from pypanel, anyway. It is much cleaner and easier to use. At least in my opinion.
Tim
Last edited by ratcheer (2012-05-03 02:31:59)

Groups are not displaying in the user's member of tab

Hi ,
We have a issue,
After mapping any AD group in CMC,the groups and users are displaying in the cmc list. but when we go to the properties of the user and member of option ,the groups are not displaying .
After restarting the CMS every thing works fine.
Every time after adding a new user we should restart the CMS, it is very difficult for us as number of users are working on this .
We are using number of AD groups.
Is there any resolution for this with out restarting the CMS.
Thank you in advance.
Environment -
BO XI3.1,
LDAP authentication.
Thanks & Regards,
Collin.

The LDAP graph is responsible for showing the membership when viewing the user properties, an issue like this would indicate the graph is not auto updating. It normally builds when starting the CMS then every 15 minutes or so for new users (depending on system activity). It shouldn't lose any info (if it does this indicates a caching or communication problem with AD). There is a graphtimeout setting in the registry (search SAP notes) if this were disabled then it may cause similar symptoms.
I'm not aware of any bugs in 3.1 causing this behavior so you may need to open a case with support (authentication team) to help troubleshoot.
Regards,
Tim

Master-Detail Relation- Detail records not displaying

Hi All,
I am working forms(10g) customization for an oracle applications. our requirement is to develop a new window(screen) which should display all the related child records for the master record in the main form on a button press.
i have developed a new database block based on a vew and provided the relation with master block, and done the required customization.
But, when i run the form, and clicked on button, it is giving an error
FRM-40350 Query caused no records to be retrieved.below is the code that i have written on button click
BEGIN
          IF event = 'WHEN-BUTTON-PRESSED'
          THEN
          SHOW_VIEW('XXSCP_GBL_CUST_PEGGING_CON');
          SHOW_VIEW('XXSCP_GBL_CUST_PEGGING_STK');
          app_window.set_window_position('XXSCP_GBL_CUST_PEGGING_WIN',
                                         'CASCADE',
                                         'XXSCP_GBL_EXCEP_DETAILS_WIN');
      SET_BLOCK_PROPERTY('XXSCP_GBL_EXP_DETAIL_V',NEXT_NAVIGATION_BLOCK,'XXSCP_GBL_CUST_PEG_V');
      GO_BLOCK('XXSCP_GBL_CUST_PEG_V');
     -- fnd_message.DEBUG('before execute');
      EXECUTE_QUERY;
      :parameter.p_excep_detail := 'FALSE';
          ELSE
               NULL;
          END IF;
          EXCEPTION
               WHEN OTHERS
               THEN
               fnd_message.DEBUG('other error at button press'||SQLERRM);
          --     NULL;
END;I am able to query records in my view from database, but not working when i run the form.
ANy suggestion will be helpful.
Thanks in advance,
pavan

Duplicate post -- Re: Master-Detail Relation- Detail records not displaying

LXDE panel menu does not display in regular user mode

Hello All,
Running arch on eeepc 1000HE. Running openbox with lxde. The menu on the panel does not display when in a regular user mode, but does display when in su mode. The button for the menu displays but when pressed the menu is blank. It seemed as if the /usr/share/application file was not being read properly so I changed the owner to my user to see if it was a permission issue. That did not help. I have not yet seen a problem like this on the web.
Let me know,
Brad

grey wrote:I don't think the LXDE menu can be edited - it's generated autmatically from the desktop files.
It can. The configuration is in /etc/xdg/menus/lxde-applications.menu. You can also copy that file into ~/.config/menus to keep your modifications local.
This brings me to two suggestions for you brahan: Check if you have a ~/.config/menus/lxde-applications.menu, and delete it if you do. Then restart lxpanel. The other thing, check if you have /etc/xdg/menus/lxde-applications.menu and what are it's permissions.

Active condition record not displayed

Hi,
During pricing, the active condtion record is picked up.. but not displayed in pricing. The analysis says " Condition record exists (removed manually)"
The detail analysis says
This message tells you that the condition record exists but has not been set in the document. If new pricing is carried out for the document item, the condition would be set.
There can be different reasons why the condition has not been set:
The condition has been manually deleted from the item condition screen.
The condition record was created later. Here it should be noted, that order processing and pricing have buffer mechanisms. This has the effect that a newly added condition record is only found after you have completely left order processing and called up the condition record again.
When an item was added, other key fields were used to access the condition record than the change time. This means that the conditionalcheck at the add and change times could have different results. This can be seen when modifications are made.
I am very much sure, the record has been created much before the sales order date. If I do carry out new pricing the active condition record is picking up correctly
any idea?

Hi
Are you checking the value in Sales order, before saving the document?
If yes, please check for the value from VA02/VA03 after saving the Order.
Thanks,
Ravi

Adhoc Query- Count of no of Records not displayed

Hi,
We are building adhoc queries for one of your requirements. In which, we need to generate the total count of the records. And also no of records with the same value in a specific column.
Even though we configured this value properly, the ALV output is not displayed as per the configuration.
Configurations:
1. Configure a Column in the count field in the "Basic List"
2. And also tried, Configuring Sort Ascending and Sum attributes under the "Statistics" .
None of the above two has produced the desired result.
Can you please suggest me which way we need to go ?

Hi,
Before the output in ALV you can try:
1. Total record count - you can try use DESCRIBE TABLE <internal table> LINES <variable>.
2. No. of records with same values - pass the internal table to another internal table and DELETE ADJACENT DUPLICATES COMPARING your needed field, then you can compare the 2 internal table and count number of similar values.
Hope this gave you another way to address your problem.
Thanks.
kath

CM Repository manager is not appearing for other users

Hi Friends,
I have configured CM repository manager with the user having super admin role.
After configuring it am able to see the KM content folder in the Content Administration->KM Content only with the user from where i have configured it. But if i login with the other non-super users the KM content folder is not appearing.
when i open the permissions of the KM content folder through the details of the context menu am getting as below.
child permissions
read permissions
write permissions
parent permissions etc
where all above are in display mode. So with this i cannt give read or write permission to any other user.
Could anyone please help me out to make it visible to all users.
I have activated all repository services while creating CM repository manager.
Is there any other permissions to be set to make KM folder visible to all users or do i need to any other repository service?
Regards
Sireesha.

Hi Lakshmi,
Content manager role has been assigned to other users.
Regards
Sireesha.

SubArea not visible for other users in ESS

Hi All,
I have created a new subarea (having few services) and assigned it to a Benefits and payments Area.
Now the issue is its only displaying to Administrator Role not for other users.
if iam giving SAP_ALL to other user then we are able to see this.
Please let me know if iam missing anything .
Thanks,
Santosh

to the role assigned to the user, you need to select end user visible in the role.
note Number              939412
ssign the following permissions to an End user.
   o Goto Content Administrator ->Portal content ->Content Provided by
      SAP ->End User Content -> Employee Self Service
   o Right click on Employee Self Service. select open-> Permissions
   o Assign read authorization to default user group "everyone".
   o Check the 'EndUser' checkbox
   o Save the Assigned permissions
   o Goto System administration -> Permissions.
                                                                Page 2
   o Goto Portal content ->Content Provided by SAP ->srvconfig
   o Assign read authorization to default user group "everyone".
   o Check the 'EndUser' checkbox
   o Save the Assigned permissions.

Public Foler Calendar Categories not Visible to Other User

My company uses calendars within the public folders for staff to be able to check their schedule.
When I add an event to one of those calendars, and change the category colour, I can see it, but none of the other users accessing the calendars can see them. It shows any text changes I've made, but no category. If those users open up the event, the category
name is even showing as selected, but the colour doesn't actually show up.
Any ideas?

Hi,
There is no feature in Exchange server to manage calendar view in Outlook. Based on my research, it seems a known issue that Outlook does not recognize or coexist with color category in the public calendar folders since Outlook 2007.
If you want to see the same colored categories on all of your computers, you must create the same categories and colors on every computer. The following article is about share color categories for Outlook 2010:
http://blogs.technet.com/b/outlooking/archive/2012/02/03/how-to-share-color-categories-for-outlook-2010.aspx
Here are some similar threads about public calendar color categories:
http://social.technet.microsoft.com/Forums/en-US/0ed65440-ecf8-43f8-8e06-599d57674627/exchange-2010-public-calendar-category-colors?forum=exchange2010
http://social.technet.microsoft.com/Forums/en-US/6ede7f1b-d8dd-41e6-a5db-b9f58d1bbf86/outlook-public-folder-calendars-not-syncing-category-colors?forum=outlook
Thanks,
Winnie Liang
TechNet Community Support

Want claimed record not display to other user.

Similar Messages

Maybe you are looking for