Want to create dynamic SQL with table join
I want to create a dynamic SQL query so that the user can enter any two table names on the selection screen and two field names that he wants to join. After which i should be able to dynamically generate the SQL (native or open) and show the result as report. I have already read the forum threads and know how to create dynamic SQL for single table, what i m struggling with is how to do inner join. I know i can use nested select but that will make the query very slow because i want to extend it to more than 2 tables later.
Will give points to useful answer for sure, thanks for reading.
Hi,
Following is a piece of code which I have used in my program.
DATA: ws_flds(72) TYPE c.
DATA: ftab LIKE TABLE OF ws_flds.
ws_flds = 'rbukrs rprctr racct ryear '.
APPEND ws_flds TO ftab.
SELECT (ftab)
INTO CORRESPONDING FIELDS OF TABLE it_grp_glpca
FROM glpca FOR ALL ENTRIES IN i_cert_item
WHERE kokrs = c_kokrs
AND rldnr = '8A'
AND rrcty IN ('0','2')
AND rvers = '000'
AND rbukrs = i_cert_item-bukrs
AND ryear = p_ryear
AND rprctr = i_cert_item-prctr
AND racct = i_cert_item-saknr
AND ( poper BETWEEN '001' AND ws_poper )
AND aufnr IN s_aufnr
AND kostl IN s_kostl
AND rfarea IN s_fkber
AND rmvct IN s_rmvct
AND sprctr IN s_sprctr
AND ( racct BETWEEN c_low AND c_high ).
You can now pass your table name as (p_table) or append fieldnames to the internal table (ftab). if it is join then you can append this table like abukrs asaknr..etc.
Regards
Subramanian
Similar Messages
-
Want to create dynamic link with ActionEvent
Hi all,
I am developing an application in JSF. I want to create links dynamically with their action event. I can create links dynamically, but I don't know how to provide actionEvent OR actionListener to those links.
Any help will be appreciated. ( If possible, give me an example / sample code. )
Thanks in advance,
JSF GEEKS
Edited by: jsfgeeks on Nov 24, 2009 10:15 AMcommandLink?
What do you mean when you say: "I want to create links dynamically with their action event."
Do you need parameters? Or different action events? -
Dynamic SQL : passing table name as parameter
Hi
I have a SQL query (a store procedure ) that i want to convert to PLSQL
This is a part of my SQL query that i am trying to to find a solution for it, because i cant convert it to oracle :
DECLARE lookupTableRow CURSOR FOR
SELECT TableName FROM SYS_LookUpTable
OPEN lookupTableRow
FETCH NEXT FROM lookupTableRow INTO @tableName
WHILE @@FETCH_STATUS=0
BEGIN
SET @sql='SELECT * FROM '+@tableName
EXECUTE sp_executesql @sql
IF @counter=0
BEGIN
INSERT INTO T_TABLE_MAPPING VALUES('P_MAIN_METADATA', 'Table', @tableName)
END
ELSE
BEGIN
INSERT INTO T_TABLE_MAPPING VALUES('P_MAIN_METADATA', 'Table'+CONVERT(NVARCHAR(10),@counter), @tableName)
END
SET @counter=@counter+1
FETCH NEXT FROM lookupTableRow INTO @tableName
END
CLOSE lookupTableRow
DEALLOCATE lookupTableRow
As i understand i can't use ORACLE dynamic sql (execute immediate) when the table name is a parameter
Furthermore when i execute this dynamic query in my SQL store procedure each SELECT statement return me as a result the relevant table rows , those result are different in each loop .
So i cant do this too with ORACLE dynamic sql .
Please advice for any solution
* how can i use dynamic sql with table name as parameter ?
* how can i use a "dynamic" cursor, in order to be able to display the dynamic results ?
Thanks for the adviceHi,
b003cf5e-e55d-4ff1-bdd2-f088a662d9f7 wrote:
Hi
I have a SQL query (a store procedure ) that i want to convert to PLSQL
This is a part of my SQL query that i am trying to to find a solution for it, because i cant convert it to oracle :
DECLARE lookupTableRow CURSOR FOR
SELECT TableName FROM SYS_LookUpTable
OPEN lookupTableRow
FETCH NEXT FROM lookupTableRow INTO @tableName
WHILE @@FETCH_STATUS=0
BEGIN
SET @sql='SELECT * FROM '+@tableName
EXECUTE sp_executesql @sql
IF @counter=0
BEGIN
INSERT INTO T_TABLE_MAPPING VALUES('P_MAIN_METADATA', 'Table', @tableName)
END
ELSE
BEGIN
INSERT INTO T_TABLE_MAPPING VALUES('P_MAIN_METADATA', 'Table'+CONVERT(NVARCHAR(10),@counter), @tableName)
END
SET @counter=@counter+1
FETCH NEXT FROM lookupTableRow INTO @tableName
END
CLOSE lookupTableRow
DEALLOCATE lookupTableRow
As i understand i can't use ORACLE dynamic sql (execute immediate) when the table name is a parameter
Furthermore when i execute this dynamic query in my SQL store procedure each SELECT statement return me as a result the relevant table rows , those result are different in each loop .
So i cant do this too with ORACLE dynamic sql .
Please advice for any solution
* how can i use dynamic sql with table name as parameter ?
* how can i use a "dynamic" cursor, in order to be able to display the dynamic results ?
Thanks for the advice
I have a SQL query (a store procedure ) that i want to convert to PLSQL
I doesn't help when you use one term to mean another thing.
SQL is a language used in both Oracle and other products, such as Microsoft's SQL Server. I don't know much about SQL Server, but Oracle (at least) doesn't support stored procedures in SQL itself; they have to be coded in some other language, such as PL/SQL.
As i understand i can't use ORACLE dynamic sql (execute immediate) when the table name is a parameter
If the table name is a parameter (or only known at run-time for any reason), that's exactly the kind of situation where you MUST use dynamic SQL.
The number of columns that a query produces (and their datatypes) is fixed when you compile a query, whether that query is dynamic or not. If you have multiple queries, that produce result sets with different numbers of columns, then you can't combine them into a single query. The best you can do with one query is to add NULL columns to some of the queries so they all produce the same number of columns.
If you're just displaying the results, there might not be any reason to combine separate result sets. Just display one result set after another.
Whenever you have a question, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002 -
I want to create dynamic ALV report
Hi great abapers,
I want to create dynamic ALV report.Please help me.
Regards,
BillaHi,
Please check the code below:
REPORT YMMR_PALLET_OVERVIEW MESSAGE-ID Y_MESSAGE_0001.
Short description:
To Display and sum up the Quantity of scanned materials on pallet for*
each Shipment number for the Packaging Materials. *
TYPE-POOLS : SLIS.
TABLES: YYLE0003. " Scanned SSCC No.
--Structure Declaration--
Structure for Shipment No. and Date.
TYPES : BEGIN OF T_VTTK_TAB ,
TKNUM LIKE VTTK-TKNUM, " Shipment number
ERDAT LIKE VTTK-ERDAT, " created Date
END OF T_VTTK_TAB .
Structure for Shipment No., Packaging Materials and Date.
TYPES: BEGIN OF T_ITAB2,
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
QUANTITY TYPE P,
ERDAT LIKE YYLE0003-ERDAT, " created Date
COUNT TYPE I,
END OF T_ITAB2.
Structure for Shipment No. and Packaging Materials.
TYPES: BEGIN OF T_ITAB3,
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
QUANTITY TYPE P, " Quantity
END OF T_ITAB3.
--Internal table Declaration--
*Internal tables for the above Declared structures
DATA: G_VTTK_TAB TYPE TABLE OF T_VTTK_TAB,
G_ITAB5_TAB TYPE TABLE OF T_ITAB2,
G_ITAB4_TAB TYPE TABLE OF T_ITAB3,
G_ITAB3_TAB TYPE TABLE OF T_ITAB2. "#EC NEEDED
*Internal table Holding Shipment No.and quantity
DATA: BEGIN OF G_TOTAL_TAB OCCURS 0 ,
TKNUM TYPE YYLE0003-TKNUM, " Shipment number
QUANTITY TYPE P,
COUNT TYPE I,
END OF G_TOTAL_TAB .
*Internal table for selection screen data
DATA: BEGIN OF G_SCANDATA_TAB OCCURS 0,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
EXIDV TYPE EXIDV, " External Handling Unit
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
QUANTITY LIKE YYLE0003-QUANTITY, " Quantity
END OF G_SCANDATA_TAB.
DATA: BEGIN OF ST_SCANDATA_TAB,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
EXIDV TYPE EXIDV, " External Handling Unit
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
QUANTITY LIKE YYLE0003-QUANTITY, " Quantity
END OF ST_SCANDATA_TAB.
DATA: BEGIN OF G_SCANDATA_COUNT_TAB OCCURS 0,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
QUANTITY LIKE YYLE0003-QUANTITY, " Quantity
COUNT TYPE I,
END OF G_SCANDATA_COUNT_TAB.
DATA: L_COUNT TYPE I.
*Internal table for Packaging Materials and quantity
DATA: BEGIN OF G_ITAB6_TAB OCCURS 0,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
QUANTITY TYPE P, " Quantity
END OF G_ITAB6_TAB.
*- Field catalog
DATA: L_ALV_CAT1_TAB TYPE TABLE OF LVC_S_FCAT.
--Work area Declaration--
DATA: WA_VTTK TYPE T_VTTK_TAB,
WA_ITAB3 TYPE T_ITAB2,
WA_ITAB5 TYPE T_ITAB2,
WA_ITAB4 TYPE T_ITAB3,
WA_ITAB1 LIKE G_SCANDATA_TAB,
WA_ALV_CAT1 LIKE LINE OF L_ALV_CAT1_TAB.
----Variable Defnition -
DATA: G_CUSTOM_CONTAINER_0100 TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
G_ALV_GRID_0100 TYPE REF TO CL_GUI_ALV_GRID,
G_CONTAINER_0100 TYPE SCRFNAME VALUE 'LIST',
G_MYLAYOUT TYPE LVC_S_LAYO, "#EC NEEDED
G_WA TYPE REF TO DATA.
DATA: G_VAR TYPE I, " No of records
G_VAR1 TYPE CHAR20. " Variable
--field symbols Declaration--
FIELD-SYMBOLS : <F_FS> TYPE TABLE,
<F_FS3> TYPE ANY,
<F_FS4> TYPE ANY,
<F_FS5> TYPE ANY,
<F_WA> TYPE ANY,
<F_FS15> TYPE ANY,
<F_FS16> TYPE SY-DATUM,
<F_FS2> TYPE T_ITAB2,
<F_FS6> TYPE ANY,
<F_FS7> TYPE ANY,
<F_FS12> TYPE ANY,
<F_FS13> TYPE ANY.
--Selection Parameters--
SELECTION-SCREEN: BEGIN OF BLOCK BLCK01 WITH FRAME TITLE TEXT-000.
"Select options
SELECT-OPTIONS :
S_TKNUM FOR YYLE0003-TKNUM , " Shipment number
S_YYREF FOR YYLE0003-YY_REFERENCE, " Packing reference
S_YYREFT FOR YYLE0003-YY_REFTP, " Reference type
S_EXIDV FOR YYLE0003-EXIDV, " External HU
S_MATNR FOR YYLE0003-MATNR, " Material number
S_VBELN FOR YYLE0003-VBELN, " SD number
S_POSNR FOR YYLE0003-POSNR, " Item number
S_LGTOR FOR YYLE0003-LGTOR, " Door for Wr Hs No
S_VHILM FOR YYLE0003-VHILM, " Packaging Mat
S_YYMEIN FOR YYLE0003-YY_MEINH, " Indicator for UOM
S_QUANTI FOR YYLE0003-QUANTITY, " Quantity
S_YCHECK FOR YYLE0003-YYCHECKED, " Destination_door
S_STATUS FOR YYLE0003-STATUS, " Packing status
S_STASHI FOR YYLE0003-STATUSSHIPTO, " Status on ship-to
S_LOADTR FOR YYLE0003-LOADTRUCK, " Load truck
S_ERDAT FOR YYLE0003-ERDAT , " Date
S_ERZET FOR YYLE0003-ERZET, " Entry time
S_AEDAT FOR YYLE0003-AEDAT, " Last changed on
S_ERNAM FOR YYLE0003-ERNAM, " Name of Person
S_AEZET FOR YYLE0003-AEZET, " Time last change
S_AENAM FOR YYLE0003-AENAM. " Name of person
SELECTION-SCREEN: END OF BLOCK BLCK01.
--INITIALIZATION--
INITIALIZATION.
Clear the variables and workarea
CLEAR :G_VAR,
G_VAR1,
WA_VTTK,
WA_ITAB3,
WA_ITAB5,
WA_ITAB4,
WA_ITAB1,
WA_VTTK,
WA_ITAB3,
WA_ITAB5,
WA_ITAB4,
WA_ITAB1.
--AT SELECTION-SCREEN--
AT SELECTION-SCREEN.
To validate the data entered in selection screen
PERFORM SUB_VALIDATE.
--START-OF-SELECTION--
START-OF-SELECTION.
*To fetch the data from table yyle0003
PERFORM GET_INPUT_DATA.
*To create the Dynamic Field Catalog
PERFORM GET_FIELDCAT.
To populate the data to final table
PERFORM GET_FINAL_DATA.
MODULE status_0100 OUTPUT *
MODULE STATUS_0100 OUTPUT.
*set title bar and PF status.
SET PF-STATUS 'ZVKS'.
SET TITLEBAR 'ZVKS'.
CHECK SY-UCOMM IS INITIAL.
SORT G_SCANDATA_TAB BY TKNUM VHILM.
*Create object for Custom container
CREATE OBJECT G_CUSTOM_CONTAINER_0100
EXPORTING
CONTAINER_NAME = G_CONTAINER_0100
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
CREATE_ERROR = 3
LIFETIME_ERROR = 4
LIFETIME_DYNPRO_DYNPRO_LINK = 5.
*Create object for ALV grid
CREATE OBJECT G_ALV_GRID_0100
EXPORTING I_PARENT = G_CUSTOM_CONTAINER_0100.
G_MYLAYOUT-GRID_TITLE = 'Display Scanning data'.
*Call method for table Display
CALL METHOD G_ALV_GRID_0100->SET_TABLE_FOR_FIRST_DISPLAY
CHANGING
IT_OUTTAB = <F_FS>
IT_FIELDCATALOG = L_ALV_CAT1_TAB
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
User Interaction
MODULE USER_COMMAND_0100 INPUT.
CALL METHOD CL_GUI_CFW=>DISPATCH.
*To exit , back or cancel
CASE SY-UCOMM.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
LEAVE PROGRAM.
WHEN OTHERS.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form get_input_data
This sub routine will get the data from yyle0003 table.
FORM GET_INPUT_DATA.
CONSTANTS: C_DOT TYPE C VALUE '.',
C_CHAR TYPE C VALUE 'D'.
CLEAR G_SCANDATA_TAB.
Get the data from yyle0003
SELECT VHILM " Packaging Materials
EXIDV " External Handling Unit
TKNUM " Shipment number
QUANTITY " Quantity
FROM YYLE0003
INTO TABLE G_SCANDATA_TAB
WHERE TKNUM IN S_TKNUM " Shipment number
AND YY_REFERENCE IN S_YYREF " Packing reference
AND YY_REFTP IN S_YYREFT " Reference type
AND EXIDV IN S_EXIDV " External Handling Unit
AND MATNR IN S_MATNR " Material number
AND VBELN IN S_VBELN " SD number
AND POSNR IN S_POSNR " Item number
AND LGTOR IN S_LGTOR " Door for warehouse No
AND VHILM IN S_VHILM " Packaging Materials
AND YY_MEINH IN S_YYMEIN " Indicator for UOM
AND QUANTITY IN S_QUANTI " Quantity
AND YYCHECKED IN S_YCHECK " Destination_door
AND STATUS IN S_STATUS " Packing status
AND STATUSSHIPTO IN S_STASHI " Status on ship-to
AND LOADTRUCK IN S_LOADTR " Load truck
AND ERDAT IN S_ERDAT " Date
AND ERZET IN S_ERZET " Entry time
AND AEDAT IN S_AEDAT " Last changed on
AND ERNAM IN S_ERNAM " Name of Person
AND AEZET IN S_AEZET " Time last change
AND AENAM IN S_AENAM. " Name of person
If VHILM contains any Decimal '.', replace it with D
LOOP AT G_SCANDATA_TAB.
REPLACE C_DOT WITH C_CHAR INTO G_SCANDATA_TAB-VHILM.
IF SY-SUBRC = 0.
MODIFY G_SCANDATA_TAB TRANSPORTING VHILM.
ENDIF.
CLEAR G_SCANDATA_TAB.
ENDLOOP.
*To get the Shipment No Creation date from VTTK.
SELECT TKNUM
ERDAT
FROM VTTK
INTO TABLE G_VTTK_TAB
WHERE TKNUM IN S_TKNUM.
SORT G_SCANDATA_TAB BY VHILM EXIDV. "TKNUM VHILM.
*To get the repeatition of Pacakaging material for each Shipment.
*--- to find the count of packaging materials under each shipment
LOOP AT G_SCANDATA_TAB.
READ TABLE G_SCANDATA_TAB INTO ST_SCANDATA_TAB INDEX SY-TABIX.
AT END OF EXIDV.
L_COUNT = L_COUNT + 1.
MOVE-CORRESPONDING ST_SCANDATA_TAB TO G_SCANDATA_COUNT_TAB.
G_SCANDATA_COUNT_TAB-COUNT = L_COUNT.
CLEAR: ST_SCANDATA_TAB, L_COUNT.
COLLECT G_SCANDATA_COUNT_TAB.
ENDAT.
CLEAR : G_SCANDATA_TAB.
ENDLOOP.
ENDFORM. " get_input_data
*& Form sub_validate
*This subroutine will validate the data eneterd in the selection screen
FORM SUB_VALIDATE.
*Varaiable declaration for Shipment number
DATA: L_TKNUM TYPE YYLE0003-TKNUM."#EC NEEDED " Shipment number
*- Condition will not qualify all primary key (IDENT)
SELECT TKNUM FROM YYLE0003 UP TO 1 ROWS
INTO L_TKNUM "wa_scandata
WHERE TKNUM IN S_TKNUM " Shipment number
AND YY_REFERENCE IN S_YYREF " Packing reference
AND YY_REFTP IN S_YYREFT " Reference type
AND EXIDV IN S_EXIDV " External Handling Unit
AND MATNR IN S_MATNR " Material number
AND VBELN IN S_VBELN " SD number
AND POSNR IN S_POSNR " Item number
AND LGTOR IN S_LGTOR " Door for warehouse No
AND VHILM IN S_VHILM " Packaging Materials
AND YY_MEINH IN S_YYMEIN " Indicator for UOM
AND QUANTITY IN S_QUANTI " Quantity
AND YYCHECKED IN S_YCHECK " Destination_door
AND STATUS IN S_STATUS " Packing status
AND STATUSSHIPTO IN S_STASHI " Status on ship-to
AND LOADTRUCK IN S_LOADTR " Load truck
AND ERDAT IN S_ERDAT " Date
AND ERZET IN S_ERZET " Entry time
AND AEDAT IN S_AEDAT " Last changed on
AND ERNAM IN S_ERNAM " Name of Person
AND AEZET IN S_AEZET " Time last change
AND AENAM IN S_AENAM. " Name of person
ENDSELECT.
IF SY-SUBRC <> 0.
MESSAGE E987 . " No data found for these selection criterias
ENDIF.
ENDFORM. " sub_validate
*& Form get_fieldcat
Preparing Field catalog
FORM GET_FIELDCAT.
DATA: L_REF TYPE REF TO DATA,
L_I TYPE I. " Variable
CONSTANTS: C_CENTER TYPE C VALUE 'C'. " Center Justified
LOOP AT G_SCANDATA_TAB INTO WA_ITAB1.
MOVE-CORRESPONDING WA_ITAB1 TO WA_ITAB3.
APPEND WA_ITAB3 TO G_ITAB3_TAB.
MOVE-CORRESPONDING WA_ITAB1 TO WA_ITAB4.
COLLECT WA_ITAB4 INTO G_ITAB4_TAB.
*To sum up the qunatity field for each TKNUM.
AT END OF TKNUM.
SUM.
MOVE WA_ITAB1-TKNUM TO G_TOTAL_TAB-TKNUM.
MOVE WA_ITAB1-QUANTITY TO G_TOTAL_TAB-QUANTITY .
APPEND G_TOTAL_TAB.
CLEAR G_TOTAL_TAB.
ENDAT.
CLEAR : WA_ITAB1,
WA_ITAB3,
WA_ITAB4.
ENDLOOP.
*--- Begin of change - SKR.EXT - EBDK986377
SORT G_ITAB4_TAB BY TKNUM.
*--- End of change - SKR.EXT - EBDK986377
LOOP AT G_ITAB4_TAB INTO WA_ITAB4.
MOVE-CORRESPONDING WA_ITAB4 TO WA_ITAB5.
MOVE-CORRESPONDING WA_ITAB4 TO G_ITAB6_TAB.
*---- to get the count
READ TABLE G_SCANDATA_COUNT_TAB WITH KEY TKNUM = WA_ITAB5-TKNUM
VHILM = WA_ITAB5-VHILM.
IF SY-SUBRC EQ 0.
WA_ITAB5-COUNT = G_SCANDATA_COUNT_TAB-COUNT.
ENDIF.
APPEND WA_ITAB5 TO G_ITAB5_TAB.
COLLECT G_ITAB6_TAB.
ENDLOOP.
CLEAR : WA_ITAB3.
SORT G_ITAB4_TAB BY TKNUM VHILM.
DELETE ADJACENT DUPLICATES FROM G_ITAB4_TAB COMPARING VHILM.
*To get the Number of fields to be displayed
DESCRIBE TABLE G_ITAB4_TAB LINES G_VAR.
L_I = '3'.
*Field catalog
WA_ALV_CAT1-FIELDNAME = 'TKNUM'(002).
WA_ALV_CAT1-COL_POS = 1.
WA_ALV_CAT1-COLTEXT ='ShipmentNo.'.
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR : WA_ALV_CAT1.
WA_ALV_CAT1-FIELDNAME = 'ERDAT'(003).
WA_ALV_CAT1-COL_POS = 2.
WA_ALV_CAT1-COLTEXT ='Creation_Date.'(005).
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR : WA_ALV_CAT1.
Create field catalog for each of VHILM
LOOP AT G_ITAB4_TAB INTO WA_ITAB4.
IF G_VAR >= 1.
CONDENSE WA_ITAB4-VHILM NO-GAPS.
WA_ALV_CAT1-FIELDNAME = WA_ITAB4-VHILM. "l_fieldname.
WA_ALV_CAT1-COL_POS = L_I.
WA_ALV_CAT1-COLTEXT = WA_ITAB4-VHILM.
WA_ALV_CAT1-JUST = C_CENTER. "'C'.
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR WA_ALV_CAT1.
L_I = L_I + 1.
ENDIF.
*TOTAL-last column in the field catalog
AT LAST.
WA_ALV_CAT1-FIELDNAME = 'TOTAL'(004).
WA_ALV_CAT1-COL_POS = L_I.
WA_ALV_CAT1-COLTEXT = 'TOTAL'(004).
WA_ALV_CAT1-JUST = C_CENTER. " 'C'.
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR WA_ALV_CAT1.
ENDAT.
SORT L_ALV_CAT1_TAB BY FIELDNAME.
*Non of the field name should not get repeated
DELETE ADJACENT DUPLICATES FROM L_ALV_CAT1_TAB.
ENDLOOP.
SORT L_ALV_CAT1_TAB BY COL_POS.
*Creating Dynamic Internal table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = L_ALV_CAT1_TAB
IMPORTING
EP_TABLE = L_REF.
Assigning the Dynamic field Catalog to field symbol.
ASSIGN L_REF->* TO <F_FS>.
CREATE DATA G_WA LIKE LINE OF <F_FS>.
ASSIGN G_WA->* TO <F_WA>.
DELETE ADJACENT DUPLICATES FROM <F_FS> COMPARING ALL FIELDS.
ENDFORM. " get_fieldcat
*& Form display_data
FORM GET_FINAL_DATA.
*variable declaration
DATA: L_TOTAL TYPE I, " Row wise total
L_FILL TYPE I, " Count
L_TOT TYPE I. " Grand total
*To get the TOTAL qunatity in the last line of out put.
LOOP AT G_ITAB6_TAB.
CLEAR WA_ITAB5.
WA_ITAB5-TKNUM = 'TOTAL'(004).
WA_ITAB5-ERDAT = SPACE.
MOVE-CORRESPONDING G_ITAB6_TAB TO WA_ITAB5 .
LOOP AT G_SCANDATA_COUNT_TAB WHERE VHILM = G_ITAB6_TAB-VHILM.
WA_ITAB5-COUNT = WA_ITAB5-COUNT + G_SCANDATA_COUNT_TAB-COUNT.
ENDLOOP.
APPEND WA_ITAB5 TO G_ITAB5_TAB.
CLEAR WA_ITAB5.
ENDLOOP.
DESCRIBE TABLE G_ITAB5_TAB LINES L_TOT.
*>>>>>>>>
****To get total qunatity of all TKNUM
LOOP AT G_TOTAL_TAB .
L_TOTAL = L_TOTAL + G_TOTAL_TAB-QUANTITY.
ENDLOOP.
*>>>>>>>>
*To assign ERDAT to g_itab5_tab
LOOP AT G_ITAB5_TAB INTO WA_ITAB5 .
READ TABLE G_VTTK_TAB INTO WA_VTTK WITH KEY TKNUM = WA_ITAB5-TKNUM.
IF SY-SUBRC = 0.
WA_ITAB5-ERDAT = WA_VTTK-ERDAT.
MODIFY G_ITAB5_TAB FROM WA_ITAB5 TRANSPORTING ERDAT.
ENDIF.
ENDLOOP.
*Assigning value in each field to respective Field symbols.
LOOP AT G_ITAB5_TAB ASSIGNING <F_FS2>.
CLEAR G_TOTAL_TAB-QUANTITY.
ASSIGN COMPONENT 'TKNUM' OF STRUCTURE <F_FS2> TO <F_FS6>.
ASSIGN COMPONENT 'TKNUM' OF STRUCTURE <F_WA> TO <F_FS7>.
<F_FS7> = <F_FS6>.
CONDENSE <F_FS2>-VHILM NO-GAPS.
ASSIGN COMPONENT 'VHILM' OF STRUCTURE <F_FS2> TO <F_FS3>.
ASSIGN COMPONENT 5 OF STRUCTURE <F_FS2> TO <F_FS4>.
MOVE <F_FS3> TO G_VAR1.
ASSIGN COMPONENT G_VAR1 OF STRUCTURE <F_WA> TO <F_FS5>.
<F_FS5> = <F_FS4>.
ASSIGN COMPONENT 'ERDAT' OF STRUCTURE <F_FS2> TO <F_FS16>.
ASSIGN COMPONENT 'ERDAT' OF STRUCTURE <F_WA> TO <F_FS15>.
WRITE <F_FS16> TO <F_FS15> .
Inorder not to display the date '00/00/000',
if there is no DATE .
IF ( <F_FS15> CP '00/*' )
OR ( <F_FS15> CP '00.*' )
OR ( <F_FS15> CP '00-*' ).
<F_FS15> = SPACE.
ELSEIF ( <F_FS15> CO ' / /' )
OR ( <F_FS15> CO ' . .' )
OR ( <F_FS15> CO ' - -' ) .
<F_FS15> = SPACE.
ENDIF.
READ TABLE G_TOTAL_TAB WITH KEY TKNUM = <F_FS6>.
IF SY-SUBRC = 0.
ASSIGN G_TOTAL_TAB-QUANTITY TO <F_FS12>.
ASSIGN COMPONENT 'COUNT' OF STRUCTURE <F_FS2> TO <F_FS12>.
ASSIGN COMPONENT 'TOTAL' OF STRUCTURE <F_WA> TO <F_FS13>.
<F_FS13> = <F_FS13> + <F_FS12>.
L_TOTAL = L_TOTAL + <F_FS12>.
ENDIF.
L_FILL = L_FILL + 1.
IF L_FILL = L_TOT.
ASSIGN L_TOTAL TO <F_FS12>.
ASSIGN COMPONENT 'TOTAL' OF STRUCTURE <F_WA> TO <F_FS13>.
<F_FS13> = <F_FS12>.
ENDIF.
AT END OF <F_FS2>-TKNUM.
APPEND <F_WA> TO <F_FS>.
CLEAR <F_WA>.
ENDAT.
ENDLOOP.
CLEAR: <F_FS6>,
<F_FS7>,
<F_WA>.
*Call the screen where Custom container is defined
CALL SCREEN 0100.
ENDFORM. " display_data
Regards
Kannaiah -
How to create dynamic nested internal table
Hi Experts,
Pleae tell me or give sample code, how to create dynamic nested internal table ?
I have seen threads saying creation of dynamic internal tables using some table structure only. But now the requirement is to create dynamic nested internal table.
For example the internal table contains two fields viz., one is field1 of dynamic internal table and other is normal field2 and values as shown below:
Nested internal table:
field1 | field2 ...
<table content1> | value2..
<table content1> | value2..
Here the [table content] should also a dynamic internal table.
Let me know if you need any other info.
regards
Saravanan Rsee the complete code..i am currently working in ECC6.0 EHP4. just check which version you are using..
REPORT yst_test_000.
DATA:
lt_comptab TYPE cl_abap_structdescr=>component_table,
ls_comp LIKE LINE OF lt_comptab,
lref_newstr TYPE REF TO cl_abap_structdescr,
lref_tab_type TYPE REF TO cl_abap_tabledescr,
lt_fcat TYPE lvc_t_fcat,
ls_fcat TYPE lvc_s_fcat,
ls_dd03p TYPE dd03p,
lt_data type ref to data.
field-symbols: <fs_table> type standard table.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'SCARR'
CHANGING
ct_fieldcat = lt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT lt_fcat INTO ls_fcat.
IF ls_fcat-ref_table IS NOT INITIAL.
CLEAR ls_dd03p.
CALL FUNCTION 'BUS_DDFIELD_GET'
EXPORTING
i_tabnm = ls_fcat-ref_table
i_fldnm = ls_fcat-fieldname
IMPORTING
e_dd03p = ls_dd03p
EXCEPTIONS
field_not_found = 1
OTHERS = 2.
IF sy-subrc EQ 0.
ls_comp-name = ls_fcat-fieldname.
ls_comp-type ?= cl_abap_datadescr=>describe_by_name( ls_dd03p-rollname ).
APPEND ls_comp TO lt_comptab.
CLEAR ls_comp.
ENDIF.
ELSE.
ls_comp-name = ls_fcat-fieldname.
ls_comp-type ?= cl_abap_datadescr=>describe_by_name( ls_fcat-rollname ).
APPEND ls_comp TO lt_comptab.
CLEAR ls_comp.
ENDIF.
ENDLOOP.
*Now for the Field which you want deep table then you can do like this
ls_fcat-fieldname = 'NESTED_TABLE'.
ls_fcat-inttype = 'C'.
ls_fcat-intlen = '000006'.
ls_fcat-rollname = 'SFLIGHT_TAB1'. "For SFLIGHT
APPEND ls_fcat TO lt_fcat.
ls_comp-name = ls_fcat-fieldname.
ls_comp-type ?= cl_abap_datadescr=>describe_by_name( ls_fcat-rollname ).
APPEND ls_comp TO lt_comptab.
CLEAR ls_comp.
lref_newstr = cl_abap_structdescr=>create( lt_comptab ).
lref_tab_type = cl_abap_tabledescr=>create( lref_newstr ).
create data lt_data type handle lref_tab_type.
assign lt_data->* to <fs_table>.
break-point.
Edited by: Vijay Babu Dudla on Apr 28, 2009 8:05 AM -
I want to create an ALV with two row fields name
Hi
I want to create an ALV with two row fields name. please suggest how to do it or send some sample code
thanksHi,
see this link
http://****************/Tutorials/ALV/ALVMainPage.htm
http://www.alvrobot.com.ar/tutorial.php
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b09ac4d5-e3ad-2910-6a81-96d1b861928c
http://abapprogramming.blogspot.com/2007/11/alv-check-boxes-sample-code.html
REPORT zalv5 NO STANDARD PAGE HEADING.
Description----
TOPICS INTRODUCED:
1. Learn about the u2018Standardu2019 PF-Status that comes as default.
2. Exclude function codes from u2018Standardu2019 PF-Status and customize it.
TYPE-POOLS: slis.
DATA: BEGIN OF i_data OCCURS 0,
qmnum LIKE qmel-qmnum,
qmart LIKE qmel-qmart,
qmtxt LIKE qmel-qmtxt,
ws_row TYPE i,
ws_char(5) TYPE c,
chk,
END OF i_data.
DATA: report_id LIKE sy-repid.
DATA: ws_title TYPE lvc_title VALUE 'An ALV Report'.
DATA: i_layout TYPE slis_layout_alv.
DATA: i_fieldcat TYPE slis_t_fieldcat_alv.
DATA: i_events TYPE slis_t_event.
DATA: i_header TYPE slis_t_listheader.
DATA: i_extab TYPE slis_t_extab.
SELECT qmnum
qmart
qmtxt
INTO TABLE i_data
FROM qmel
WHERE qmnum <= '00030000010'. LOOP AT i_data. i_data-ws_row = sy-tabix. i_data-ws_char = 'AAAAA'. MODIFY i_data. ENDLOOP. report_id = sy-repid. PERFORM f1000_layout_init CHANGING i_layout. PERFORM f2000_fieldcat_init CHANGING i_fieldcat. PERFORM f3000_build_header CHANGING i_header. PERFORM f4000_events_init CHANGING i_events. CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY' EXPORTING * I_INTERFACE_CHECK = ' ' * I_BYPASSING_BUFFER = * I_BUFFER_ACTIVE = ' ' i_callback_program = report_id * I_CALLBACK_PF_STATUS_SET = ' ' * I_CALLBACK_USER_COMMAND = ' ' * I_CALLBACK_TOP_OF_PAGE = ' ' * I_CALLBACK_HTML_TOP_OF_PAGE = ' ' * I_CALLBACK_HTML_END_OF_LIST = ' ' * i_structure_name = ' ' * I_BACKGROUND_ID = ' ' i_grid_title = ws_title * I_GRID_SETTINGS = is_layout = i_layout it_fieldcat = i_fieldcat * IT_EXCLUDING = * IT_SPECIAL_GROUPS = * IT_SORT = * IT_FILTER = * IS_SEL_HIDE = * I_DEFAULT = 'X' i_save = 'A' * IS_VARIANT = it_events = i_events * IT_EVENT_EXIT = * IS_PRINT = * IS_REPREP_ID = * I_SCREEN_START_COLUMN = 0 * I_SCREEN_START_LINE = 0 * I_SCREEN_END_COLUMN = 0 * I_SCREEN_END_LINE = 0 * IT_ALV_GRAPHICS = * IT_ADD_FIELDCAT = * IT_HYPERLINK = * IMPORTING * E_EXIT_CAUSED_BY_CALLER = * ES_EXIT_CAUSED_BY_USER = TABLES t_outtab = i_data EXCEPTIONS program_error = 1 OTHERS = 2 . IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form F1000_Layout_Init
FORM f1000_layout_init USING i_layout TYPE slis_layout_alv.
CLEAR i_layout.
i_layout-colwidth_optimize = 'X'.
i_layout-edit = 'X'.
ENDFORM. " F1000_Layout_Init
*& Form f2000_fieldcat_init
FORM f2000_fieldcat_init CHANGING i_fieldcat TYPE slis_t_fieldcat_alv.
DATA: line_fieldcat TYPE slis_fieldcat_alv.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'QMNUM'. " The field name and the table
line_fieldcat-tabname = 'I_DATA'. " name are the two minimum req.
line_fieldcat-key = 'X'. " Specifies the column as a key (Blue)
line_fieldcat-seltext_m = 'Notification No.'. " Column Header
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'QMART'.
line_fieldcat-ref_tabname = 'I_DATA'.
line_fieldcat-hotspot = 'X'. " Shows the field as a hotspot.
line_fieldcat-seltext_m = 'Notif Type'.
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'QMTXT'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_m = 'Description'.
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'WS_ROW'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_m = 'Row Number'.
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'WS_CHAR'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_l = 'Test Character Field'.
line_fieldcat-datatype = 'CHAR'.
line_fieldcat-outputlen = '15'. " You can specify the width of a
APPEND line_fieldcat TO i_fieldcat. " column.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'CHK'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_l = 'Checkbox'.
line_fieldcat-checkbox = 'X'. " Display this field as a checkbox
line_fieldcat-edit = 'X'. " This option ensures that you can
" edit the checkbox. Else it will
" be protected.
APPEND line_fieldcat TO i_fieldcat.
ENDFORM. " f2000_fieldcat_init
*& Form f3000_build_header
FORM f3000_build_header USING i_header TYPE slis_t_listheader.
DATA: gs_line TYPE slis_listheader.
CLEAR gs_line.
gs_line-typ = 'H'.
gs_line-info = 'This is line of type HEADER'.
APPEND gs_line TO i_header.
CLEAR gs_line.
gs_line-typ = 'S'.
gs_line-key = 'STATUS 1'.
gs_line-info = 'This is line of type STATUS'.
APPEND gs_line TO i_header.
gs_line-key = 'STATUS 2'.
gs_line-info = 'This is also line of type STATUS'.
APPEND gs_line TO i_header.
CLEAR gs_line.
gs_line-typ = 'A'.
gs_line-info = 'This is line of type ACTION'.
APPEND gs_line TO i_header.
ENDFORM. " f3000_build_header
*& Form f4000_events_init
FORM f4000_events_init CHANGING i_events TYPE slis_t_event.
DATA: line_event TYPE slis_alv_event.
CLEAR line_event.
line_event-name = 'TOP_OF_PAGE'.
line_event-form = 'F4100_TOP_OF_PAGE'.
APPEND line_event TO i_events.
CLEAR line_event.
line_event-name = 'PF_STATUS_SET'.
line_event-form = 'F4200_PF_STATUS_SET'.
APPEND line_event TO i_events.
ENDFORM. " f3000_events_init
FORM F4100_TOP_OF_PAGE *
FORM f4100_top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = i_header.
ENDFORM.
FORM F4200_PF_STATUS_SET *
FORM f4200_pf_status_set USING i_extab TYPE slis_t_extab.
REFRESH i_extab.
PERFORM f4210_exclude_fcodes CHANGING i_extab.
SET PF-STATUS 'STANDARD' OF PROGRAM 'SAPLSALV' EXCLUDING i_extab.
ENDFORM.
*& Form f4210_exclude_fcodes
FORM f4210_exclude_fcodes USING i_extab TYPE slis_t_extab.
DATA: ws_fcode TYPE slis_extab.
CLEAR ws_fcode.
ws_fcode = '&EB9'. " Call up Report.
APPEND ws_fcode TO i_extab.
ws_fcode = '&ABC'. " ABC Analysis.
APPEND ws_fcode TO i_extab.
ws_fcode = '&NFO'. " Info Select.
APPEND ws_fcode TO i_extab.
ws_fcode = '&LFO'. " Information.
APPEND ws_fcode TO i_extab.
ENDFORM. " f4210_exclude_fcodes
thanks
karthik
reward me if usefull -
How can I create a query with tables in INFOSET?
Dear Gurus,
How can I create a query with tables in INFOSET?
Just tables and fields INFOSET?
Kind Regards,Hello
Check following SCN Article for your understanding/reference:
- [Using Infoset Query ,SAP Query and Quick Viewer|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10eab7af-0e54-2c10-28a5-87b47adbe1a5]
Regards
JP -
HT2731 i want to creat an account with out cridit card but the opption of noon is not in page
sorry because my english is week but i well tri my best u understand my problem . i complate my all detta and i want to creat my account with out card what can i do
There are instructions on this page for creating a new account without giving a credit card number : http://support.apple.com/kb/HT2534 e.g. select a free app in the store and click on 'create Apple id' when 'buying' it
-
I want to create a report with more than 64 column's.
I want to create a report with more than 64 column's. I have generated Query the XML.When I tried to create a template for the report.I have Inserted the colum's Wizard and finish it throughing error message. "you cannot create atable with more that 63 coloum's "
Hi ,
Can u Check the below thread
More than 63 columns in rtf template -
I want to create a form with a manager completing one section and a staff member another. Neither should be able to edit the others. Can different sections be password protected by different passwords? I'm thinking there might be an "official use only" function.
You can use 2 forms in one portfolio.
-
Haw to create dynamic PDF with dynamic flowing tables across pages?
Hi!
Sorry for my english, I use it very rarely
I try creating PDF form with many tables (example document: https://docs.google.com/open?id=0BxTpZtaOkLBbcEJzdGJFcXVSWDJ0RlladUZJd1hMZw). But, when the table or any element hit the bottom of page, they just flow over it. Also in designer elements don't distribute across pages but just disappear on first page bottom. I want to dynamically distribute elements across pages. What I do incorrect?
mPlease share you form with me [email protected]
I will try to solve the problem.
Nith -
Cannot create dynamic page with cursor based on linked table
I get the following error when i try to create a dynamic portal page that uses a pl/sql cursor:
ORA-06550: line 1, column 24:
PL/SQL: ORA-00980: synonym translation is no longer valid
ORA-06550: line 1, column 24:
PL/SQL: SQL Statement ignored (WWV-11230)
Failed to parse as REPORTS - DECLARE CURSOR C1 IS SELECT * FROM
[email protected]; BEGIN FOR R1 IN C1 LOOP HTP.P(','||'<BR>');
END LOOP; END; (WWV-08300)
Dynamic page:
<HTML>
<HEAD>
<TITLE>Example</TITLE>
</HEAD>
<BODY>
<H2>Example of A Dynamic Page</H2>
<ORACLE>
declare
cursor c1 is
select * from [email protected];
begin
for r1 in c1 loop
htp.p('hello<br>');
end loop;
end;
</ORACLE>
</BODY>
</HTML>
When i use the sql query from the cursor in the page below, i get no errors:
<HTML>
<HEAD>
<TITLE>Example</TITLE>
</HEAD>
<BODY>
<H2>Example of A Dynamic Page</H2>
<ORACLE>select * from [email protected]</ORACLE>
</BODY>
</HTML>
I tried a dynamic page with a cursor on session_roles and had no problems. I assume that there is an issue with the database link or the privileges. The queries seem to get executed under portal_public;
Oracle Portal Version: 9.0.4.0.99I get the following error when i try to create a dynamic portal page that uses a pl/sql cursor:
ORA-06550: line 1, column 24:
PL/SQL: ORA-00980: synonym translation is no longer valid
ORA-06550: line 1, column 24:
PL/SQL: SQL Statement ignored (WWV-11230)
Failed to parse as REPORTS - DECLARE CURSOR C1 IS SELECT * FROM
[email protected]; BEGIN FOR R1 IN C1 LOOP HTP.P(','||'<BR>');
END LOOP; END; (WWV-08300)
Dynamic page:
<HTML>
<HEAD>
<TITLE>Example</TITLE>
</HEAD>
<BODY>
<H2>Example of A Dynamic Page</H2>
<ORACLE>
declare
cursor c1 is
select * from [email protected];
begin
for r1 in c1 loop
htp.p('hello<br>');
end loop;
end;
</ORACLE>
</BODY>
</HTML>
When i use the sql query from the cursor in the page below, i get no errors:
<HTML>
<HEAD>
<TITLE>Example</TITLE>
</HEAD>
<BODY>
<H2>Example of A Dynamic Page</H2>
<ORACLE>select * from [email protected]</ORACLE>
</BODY>
</HTML>
I tried a dynamic page with a cursor on session_roles and had no problems. I assume that there is an issue with the database link or the privileges. The queries seem to get executed under portal_public;
Oracle Portal Version: 9.0.4.0.99 -
Dynamic SQL in table vauled function or CLR
So I have a query that gives me some analysis on the values in a column, in a table. It reurns a small data set.
It gives me the max, min, stdev, avg and some other stats grouped by another column.
I wanted to create a table valued function from the query, so I could do the same analysis on any numeric column, in any table. I would just pass in the column name and the table name as paramters to my table-valued function and it would return the
data set. Then I could join to it and use in other queries.
I thought I would build my query using dynamic SQL and execute it within the function, but I got an error and learn that you can not use execute in a function.
I have never created a CLR function, would this be possible to do it this way? This would be a decent sized step for me, but am willing to learn if possible. Or does anyone know how to solve this problem?
Problem: Pass column name and table name into function and have it reurn a dataset. Use the dataset as a table in other queries, scripts or procedures like a table valued function.
Thanks,
MikeMilke
Take a look into READ only table variable parameter
Create a user-defined data type with a single column.
Develop a procedure with a table variable as an input parameter.
Declare a table variable of the type of the user defined data type.
Loading 10 records into the table variable and pass the table
variable to the stored procedure.
create type tt_example AS TABLE
(spid int)
go
create procedure usp_example
@spids tt_example READONLY
AS
SELECT *
FROM @spids
GO
declare @spids tt_example
insert into @spids
select top 10 spid
from sys.sysprocesses
exec usp_example @spids=@spids
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Dynamic sql with dynamic bulk collection variable
Hi,
I am facing the issue while bulk collecting dynamic sql query data into dynamic variable.
Eg:
query1:= << dynamic select query>>
Execute immediate query1 bulk collect into Dynamic_varibale;
here dynamic_varible is pl/sql table type with 1 column.
How do i declare "dynamic_variable" here????
please suggest...create type t_id is table of number
SQL> create type t_id is table of number
2 /
Type created.
SQL> declare
2
3 v_tid t_id;
4 v_results sys_refcursor;
5
6 v_employee_id number;
7 v_name varchar2(100);
8
9 v_sql varchar2(1000);
10
11
12 begin
13 v_tid := t_id(7902,7934);
14
15 --
16
17
18 v_sql := 'select empno, ename from scott.emp ' ||CHR(10)
19 || 'where empno in (select column_value from table(cast(:v_tid as
t_id)))';
20
21 dbms_output.put_line(v_sql);
22 dbms_output.put_line('----------');
23
24 open v_results for v_sql using v_tid;
25
26
27 IF v_results IS NOT NULL
28 THEN
29 LOOP
30 FETCH v_results
31 INTO v_employee_id, v_name;
32
33 EXIT WHEN (v_results%NOTFOUND);
34 dbms_output.put_line(v_name);
35 END LOOP;
36
37 IF v_results%ISOPEN
38 THEN
39 CLOSE v_results;
40 END IF;
41 END IF;
42
43 end;
44 /
select empno, ename from scott.emp
where empno in (select column_value from
table(cast(:v_tid as t_id)))
FORD
MILLER -
How to Create Dynamic form using table data
Dear All,
I have one Table called PRODUCT_MASTER where product details are stored. Say product A,B,C,D are stored in the table. Another table called SUB_PRODUCT_MASTER, which contains sub product details.Say A1,A1,B1,B2, B3,C1, C2, C3, D1,D2,D3.
Now, I want to create a dynamic form based on product,sub product. for a whole month. For better under standing here is the format.
PRODUCT A B C D
SUB_PROD A1 A2 B1 B2 B3 C1 C2 C3 D1 D2 D3
Days
1 x x x x x x x x
2
3
4
5
6
7
Now whenever I add one row in the PRODUCT)MASTER table and SUB_PRODUCT_MASTER table, Form should add one column in the form automatically. e.g. If I add Product E with two Sub product E1 and E2 then form should add ptoduct E column in the form with sub products E1 and E2 as per above format. Here days are fixed to 31. This forms should accept product wise daily despatch entry. For
storing despatch entry another table is created.
Please help to create this type od forms.You want I believe to create Croos-Table(Matrix) form. Visit Cross-table (matrix) forms layout and add "Please Send me too".
Maybe you are looking for
-
How do I get iWeb to publish just the files to my root directory
Hey all, when I publish my site to my hosting server via iWeb it's just copying the entire folder into my root directory instead of copying the files to the root directory. This is causing my site url to look like this: www.mysite.com/myfolder/ how d
-
Optical drive no longer working
Hi to everyone, my optical drive seems to have some problems at writing to CDs, now. Every time I try to burn, I will get an error message: _- in Finder:_ Finder: Burn started, Tue Nov 25 15:09:22 2008 Finder: Burning to CD-R media with SAO strategy
-
&P_Year - is it an APEX variable?
Hello Folks I am working on a query generated by a person who no longer works with us. In this query, he was consistently using a variable '&P_Year'. Each time I try to compile the code, I get an error ORA01008 - A SQL statement containing substituti
-
i'm buliding a web page that navigate a database. how can i make my page not to connect every time i click on a button. how can i used cachedrowset.
-
HT4527 Copying ratings via home sharing
Hi, is it possible to get the ratings across as well when importing via home sharing? I use smart playlists so I'd like to be able to transfer the ratings of the songs as well. Many thanks. I'm assuming that's in the XML. Note I don't want to import