Want to open another project from Quiz Results - can't get it to work.

I have been trying to get my course to open another project (an instruction slide) after the user completes a quiz and it is not working. The course always closes after the quiz results. I have set the Project End Options and the Pass or Fail options to all open another project (the instruction slide), but instead, after the user clicks 'Continue' on the quiz results page, the course always closes. What could I be missing? (Am using Captivate 5.)

Just finally getting my head above water and am able to respond and update. Yes, I was using a tool called RELOAD to update the imsmanifest file. Actually a great tool that I can recommend now that I worked out the kinks with Captivate. Please see this post for more information. http://www.caddicks.com/blog/2012/02/17/how-to-publish-a-multi-file-captivate-project-as-a -single-scorm-course/#comment-249711
Here's a quick summary of how I ended up resolving this - I can't even remember all the different options I tried until I settled on this! I never resolved the issue with launching another project from the quiz results page, but found a workaround that works even better.
The course starts with a brief introduction module. The 'Continue' button on the last slide is set to launch another project, which opens the course's 'main menu.'
The 'main menu' project has several buttons that launch appropriate sub-topic projects.
On the last slide of each of the 'sub-topic' projects has the 'Continue' button set to launch the 'main menu' again. Each of these had quiz questions, but feedback was set at the question level only - no quiz results page.
The last option on the 'main menu' project was a 'Course Completion' button - which launches a project containing the final quiz. (NOTE: This was always the only project that had the "Show score at the end of the quiz" set to display under Preferences / Quiz / Settings. After a lot of hair-pulling, I realized that it wasn't necessary to open another project to accomplish what I wanted to do, which was return the user to some basic instructions before they retook the quiz.)Here is how the last project was set up.
The first slide is a content slide with instructions for the quiz. When the user clicks the "Back" button from this slide, it will launch the 'main menu' project. 'Next' simply goes to the next slide.
Slides 2-5 are quiz questions
Slide 6 is the quiz results slide (turned on under Preferences / Quiz / Settings). Buttons are: Review Quiz and Continue.
Slide 7 is a content slide with instructions on what to do next. This slide has a text button that I called "Retry" and under Properties / Reporting for the button the "Include in quiz" is NOT checked. The Retry button takes the user back to the first slide in the quiz.

Similar Messages

  • I want to open a project from premiere pro on my mac

    I want to open a project from premiere pro on my mac,the project was edited on a different mac originally.
    Some of the sound from the clips are missing and all the clips are there but when go to a clip in the timeline and press enter it is just black.
    Please help!!!!!!
    P.SIt also askes for RENDERED MFX FILES????

    You may have to go to the original computer and go to the project manager which will let you gather all media to a single folder. Then take that folder to a new computer and edit away.
    As far as black clips. If the media IS located but it shows up black during playback this might mean the file is damaged. This happened to me yesterday and when I opened the file outside of premiere it would not play at all.

  • Vista upgrade from XP- now can't get applications to work.

    Upgraded my computer from XP to Vista and although I recovered many files from the windows.old folder I can't get these files or applications to work.  i.e.:  I can't get MS Office pro to work, that's just an example.  I can't get any of
    the applications to work.  What has to be done to get these applications (and games) to run.

    It sounds as though you are just copying the files from Windows.old. However to make them work you must really reinstall the applications and games.
    Blogging about Windows for IT pros at
    www.theexperienceblog.com

  • After Effects CC: how to retain Camera Raw's settings when opening the project from a different drive

    I want to open a project from a drive which is different than the original one, but which has exactly the same folder structure and files as the original drive. When opening the project, all files appear as missing because the drive is different. When I replace these missing files for the ones in the new drive, After Affects relinks all media. However, the camera-raw settings that were embedded in such files are lost: After Effects opens the files as no previous camera-raw correction had been done. Is there a way to avoid this?

    What could be in my project that makes it unable to open?

  • Aggregator exe project not opening another project

    aggregator exe project not opening another project when published.
    The same works fine in HTML.
    I tried in Captivate 7 and 8 as well.

    I'm having a similar issue. I've used a "home" button to return to the main menu of the course. However, all it does is return me to the last screen I was on. I've tried linking the button to a the aggregator htm and to the swf. Neither gives me the results I want. I currently have it set to open in the current window. However, I get the feeling that it's automatically invoking a bookmarking feature and I'm not getting the pop-up box asking me if I want to return to the last screen or not.

  • Robo HTML 9 will not open our project from Source Control after initial start.

    We have a project in version control that we have been using forever, since 2003 or so and many versions of RH.  Now that we have upgraded to 9, this project will open the first time in version control and work normally.  Once you close the project and attempt to reopen from the starter screen, it opens just great, just not in version control.  The files are still set to read only.  I have done this several times and the only way i can work on my project in version control is to act like i am opening a project from scratch, then it needs to overwrite all of my local files with the server files.  It would not be so bad but I am 3000 miles away from the server and 13 hops plus a slow firewall on the other end.  While this has never been a problem in the past it is a big problem because it takes hours for all the files to download and overwrite my local files.
    This only happens with RH9 and Version Control 3.1.  RH8 works no problem.  So, I don't know if this is a RH9 starter problem or a Source Control Problem.  Maybe I will make a similar thread in the RH area.  I'll wait to see if I get any useful hits from this one first.
    It is very strange, I had RH9 open for several days because I was afraid to close the project for this reason and yesterday I published for the month so the heat is less right now but today, it opened with no source control.  If I go to Source Control the only thing i can select is put project in source control.  That is how it got into source control after converting to RH9.
    We have another project that seems to open from version control normally but we can only save topics in HTML view.  No useful answers to that topic after a week.
    Got any ideas???
    I have tried different folder names, different paths, etc.
    Thanks,
    dv

    Ok, here is a wierd one, I used the add to version control icon in the menu bar, It already knew the path so I figured I'm the only one who has been editing these files for the past few days so I clicked add to version control.  It added it. I closed and reopeded and still had the same files checked out.  Closed, checked in all, then reopened and it is working in SourceControl.  Strange that after opening from source control and closing that you need to reopen and tell it to put the project into source control.  Obviously some flag is not getting set somewhere.  This might help others having problems reopening source control files.
    dv

  • In using mail with my mackbook air with maverick, to open a message takes time as if the message is downloaded & its same every time I want to open the message from inbox.

    In using mail with my mackbook air with maverick, to open a message takes time as if the message is downloaded & its same every time I want to open the message from inbox.

    WoW! I'm surprised by the speed you reply and how serious you are with your answers! Thank you very much guys!!!
    Replying to Toad-Hall:
    I have a proper mailing list created as the manual says. It's a small group of contacts that exist in the address book. I do not type them as CC I just write "clients" and before I finish the word the name of the list appears.
    How can I stop Avast from scanning out going mail? It's the free version and I haven't found a real solution. I also tried to totally turn off the "mail shield" but I kept facing the same issues. However, I just turned it off and tried to send the mail, I didn't restart windows or thunderbird
    The idea with ipage server was fantastic! It would never come to my mind!!! As far as I see, the limit is 250 mails per hour. I doubt if I have ever reached the 50% of it. I also don't reach the bandwith limits... Besides that, if I had exceeded the limit I would get multi responses that "mail was not delivered".
    I want to thank you both for your excellent help so far. I'm sad to say that I still haven't solved the issue. When I made smaller lists, with the same addresses chosen from the address book I could send the messages, having a short delay. I would blame Avast but I tried the same on another laptop with my favourite NOD32 and had the same problem.
    What else should I check? Should I focus on Avast?

  • How to make sure, on success action 'Open another project' works on both ipad and desktop devices

    If I have a project with a open another project in a new window action set to a button in that project, will only placing the swf and htm files of the newly opened project within the published folder of the parent project be enough for allowing the parent project to be played successfully both in desktop and mobile devices like ipad? To allow this, I presume multiscreen.html file located within the published folder of the parent project is the file to be used. But, since swf files can't be played on mobile devices, do I need to place the multiscreen.html file located within the published folder of the newly opened project into the published folder location of the parent project? The parent project folder location already has multiscreen.html file specific to that project and if the multiscreen.html file of the newly opened project need to be added to the published folder location of the parent project(which also has multiscreen.html file), how do I go about doing this? Can I just rename the mulscreen.html file of the newly opened project to say something different like multiscreen1.html and add this file along with the swf and htm file into the published folder location of the parent project, so that it works for both desktop or mobile devices.

    From what I'm hearing, you're probably wise to have a copy of the file in both locations.  One in the same folder as the SWF, and the other in with the HTML5 files.  What I don't know is exactly where in the HTML5 folders your file would need to be.  It might need to be at the same level as the index.html.  I haven't tested this.
    You should be able to figure out the answer to a lot of your questions just by testing things out on content uploaded to a web server.  At the end of the day, if it works, it works.

  • Click box - Opening another project again, again, again...

    Hello,
    I think I'm an idiot. I've read almoust all of the "opening another project", "linking..." etc discussions. But I have no idea how to make it working. Starting once again:
    I have unlocked Flash security or whatever it is. I have a project and it is so big so I decided to cut him for more smaller projects. I would like to have a one slide project with many clickboxes areas for opening another projects.
    I exported, pubished all possibilities of linked project(swf,CP,hml...) to one slide project folder. I tried Open another project, open file/URL. Nothing happens.
    What do I have to do, step by step.
    Where should be all projects, what formats, where to preview
    I hope u understand all.
    cheers Barbatian

    Hello,
    I know I won't be using Jump to Slide. :-)
    Let me explain...
    For example I have a one slide project. On this one slide is screenshot of www.adobe.com, just a picture.
    I also have few more projects called "Products", "Solutions", "Learning", ...
    Each of these projects explains what any of these "folders" contains.
    For example:
    Project Products will start:
    Click here, to see our Products(with voice and mouse movement)
    Next
    Here u can find any of our products. Click any of them to learn about it...
    Sth like this... I hope u know what I mean.
    Instead of having this all in one project(1000 slides) I would Like to have main page with "hyperlinks" to another projects. But I don't want My main project to open another project as another file/window. I just want my main project to "jump to another project" in the same window. Is this possible in .exe file or .swf ?
    Another way:
    I would like to have my main project on web. So like the first time user won't be jumping to another windows or tab. He will be watching in one tab, one captivate "movie".
    Is this possible ?
    How Can I do that ?
    And how Can I open those another project in other tabs/windows in web.
    I tried to publish all projects to the same folder but it doesn't work... Maybe I did sth wrong. Can u write it step by step what should I do?
    I hope u understand my bad english and my vision :-)
    cheers Barbatian.

  • Opening a project from version control

    RH11 | WebHelp
    This may be related to my previous post (File Status "New version available") but I am now unable to open a project from version control using the padlock button in RoboHelp's Open Project dialog box. It lets me select a project to open, but then just sits there, not doing anything.
    Any ideas?
    Thanks
    Jonathan

    This sounds like a bug to me. Does the RH11 work on a Windows 7 machine? If you have a VMWare lying around, you may want to give that a shot. Short of contacting Adobe with a bug report, I'm out of idea's.
    Kind regards,
    Willam

  • Unable to open the Projects from Project center with the Alias name PWA 2010

    Hi,
    I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is  project server 2010,
    My system is ABC.DC.IN  alias name i have given is DEF.AD.COM  
    With the system name i can able access PWA and all are working fine.
    As i have observed with alias name i can able to login to  pwa and all the server  setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx) its
    is coming in the below of the ie. 
    But with Alias name these are the issues i am facing,
    1.when longing with alias name its asking two times for user name and password
    2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
    3. I have observed one more thing if click on Project details then only this issue  is coming project schedule and project information is also opening with Alias name.
    can any one Help me. 
    Vijay kommireddi

    Hi
    Hope the below link will help you.
    And also please check the browser which you are using as mostly IE 8.0 won't support, Please try it in IE 9.0 and Chrome.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/c03300d2-2a27-4d5d-b3f6-a3660805e125/alternative-access-mapping-when-accessing-the-site-it-is-asking-for-username-and-password
    Thanks
    Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

  • Opening another iview from an iview in the same page ....

    Hello ....
    I need to open another iview from an existing one in the same page without overwriting the other existing iviews on the page. I am using EPCM.doNavigate() as given below
    EPCM.doNavigate('ROLES://portal_content/com.hersheys.Hershey_Content/com.hersheys.Human_Resources/com.hersheys.hr.sap_mss_iviews/EmployeeExit?SCENARIO_PARAMS=PERNR='+person,0);
    The iview does open in the same page, however i lose the other iviews on the top and bottom of the page ....
    Any pointers??
    Thanks,
    Devina

    Hi Devina,
    Try using IUrlGeneratorService to generate the URL to the required iView, instead of EPCM.doNavigate().
    doNavigate sometimes refreshes the whole page while loading the required iView.
    cheers
    Kiran

  • I can't open an update for Acrobat 9 pro I get asked to open another prog from the suite but when Io

    I can't open an update for Acrobat 9 pro I get asked to open another prog from the suite but when I do Acrobat just shuts down,help !!
    And I can't get back to the older version of Acrobat

    See this User Tip by turingtest2
    https://discussions.apple.com/docs/DOC-6562
    JimmieJag wrote:
    2. If I reinstall it, will I lose my store credit and non-iTunes songs?
    Nothing should be lost... However... it is both Prudent and Recommended that a backup should have been created and maintained.

  • How to Open another WEBI from one WEBI by clicking a data point on the first tab?

    Hello Guys,
    I have a requirement in which user wants to open another tab by clicking a data point on one tab.
    So, lets say we have a table in one Webi and its has following fields:-
    Customer : Sales DOC: Month : Year : Qty : Amt
    User wants, that if they click on Customer, it should open another webi which should show them a chart reflecting the data about that customer only.
    How can I do that?
    Regards
    Prashant

    Hi,
    Check Below links about Hyperlink details
    http://scn.sap.com/docs/DOC-21161
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0daee1d-0e38-2d10-0c91-8bb4ab5aa266?quicklink=index&overridelayout=true
    Regards,
    Anish

  • Wanting to use Photoshop CS6 to open images directly from iPhoto 11. Using OSX10.8.2 and iPhoto 11.  Just installed Photoshop CS6 and want to open images directly from iPhoto.    Before I installed PS I was not able to edit photos in iPhoto 11.  Nothing

    Wanting to use Photoshop CS6 to open images directly from iPhoto 11.
    Using OSX10.8.2 and iPhoto 11.  Just installed Photoshop CS6 and want to open
    images directly from iPhoto.    Before I installed PS I was not able to edit photos
    in iPhoto 11.  Nothing happens when I click on ‘edit‘ it is blank. 
    And now it will not work using Photoshop CS6 either.
    From Help Center I have gone to iPhoto/Preferences/ Advanced and chosen Photoshop CS6  to Edit Photos but then cannot find an 'Open' to click? Perhaps this is the problem?
    When I select a photo in iPhoto and click the Edit button - nothing happens.
    Please advise. Glenys

    This may be of help to you:
    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done. 
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Note:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    OT

Maybe you are looking for