Want to query a set of unique values for concat columns

Hi,
I have Table1 with unique constraint on col2 and col3.
Have to optimize the following query as it does a FTS
select * from table1
where col2||col3 in (col1val1 || col2val1, col1val2 || col2val2, ....)
Please advise, Thanks In Advance.

select * from table1
where col2||col3 in (col1val1 || col2val1, col1val2
|| col2val2, ....)How about
select * from table1
where col2, col3 in (select col1val1, col2val1 from dual union all
                     select col1val2, col2val2 from dual union all...
                    )

Similar Messages

  • How to set default values for boolean columns

    I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
    I've tried to set default value at column level:
    <Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
    Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
    <Default>TRUE</Default>
    </Field>
    and at content type level:
    <FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
    But in any case, when i create a new item with this content type, default value is applied.
    Can anyone tell how to set default values for boolean columns?
    Thanks in advance,
    Regards,
    Sergio

    In the field definition you can set
    <Default>1</Default>
    or
    <Default>0</Default>
    How to set the default value Null?

  • HOW TO  SET A DEAFULT  VALUE  FOR A FIELD?

    hi friends
      i have doubt..how to  set a default  value for a field..say  like in  local printer field i always want  lp01 to  be displayed defaultly..when i  click  F1  in that  field i  get the parameter id ..i  know there is something  dealt with that  parameter id..how can i  set that  default value ..in the case of the default  printer value i made in  own data settings as lp01 but  how to  do it  normally  for other  field which has parameter id ??????
    thanks and regards
    prince

    Hi Prince,
    u can set the default value in abap as given below
    SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    SELECTION-SCREEN SKIP 1.
    PARAMETERS : S_BUKRS TYPE BSID-BUKRS OBLIGATORY DEFAULT '1000'.
    PARAMETERS : S_BELNR TYPE BELNR_D OBLIGATORY DEFAULT '1600000070'.
    PARAMETERS : S_GJAHR TYPE GJAHR OBLIGATORY DEFAULT '2008'.
    PARAMETERS : ASON TYPE BUDAT OBLIGATORY DEFAULT SY-DATUM.
    PARAMETERS : S_KUNNR TYPE KUNNR MODIF ID GP1.
    PARAMETERS : S_LIFNR TYPE LIFNR MODIF ID GP2.
    SELECTION-SCREEN SKIP 1.
    SELECTION-SCREEN : END OF BLOCK B1.
    or
    u can give the default value in INITIALIZATION also.
    vlue = '1000'.

  • Set a default value for a radio button populated with a List of value

    Hi,
    I am using jdeveloper 11.1.1.3.0. I need to set a default value for a radio button populated with a List of value(Yes/No). Here's the selectonechoice code.
    <af:selectOneRadio value="#{bindings.Code.inputValue}"
    label="#{bindings.Code.label}"
    required="#{bindings.Code.hints.mandatory}"
    shortDesc="#{bindings.Code.hints.tooltip}"
    id="sor1" autoSubmit="true"
    valuePassThru="true" layout="horizontal">
    <f:selectItems value="#{bindings.Code.items}" id="si1"/>
    </af:selectOneRadio>
    I want to have the selectonechoice set to No by default. In the previous versions, I set the default value in the base attribute VO. But it is not working in the new version.
    Thanks

    Hi,
    this should work in JDeveloper 11.1.1.3 the same as in 11.1.1.2. If it doesn't then it is better to file a bug than to work around it
    Frank

  • How to have a unique value for each record??

    could any 1 help me out in this...
    I want to have a column name 'Order No' which should be unique.
    How to generate a unique value for each record.??

    could any 1 help me out in this...
    I want to have a column name 'Order No' which should be unique.
    How to generate a unique value for each record.?? If you are using SQL PLUS to create the table try something like
    this:
    CREATE TABLE ORDER_TEST (
    ORD_NO NUMBER (8) NOT NULL PRIMARY KEY,
    ORDERDATE DATE,
    CUSTID NUMBER (8) NOT NULL,
    SHIPDATE DATE,
    TOTAL NUMBER (8,2) CONSTRAINT TOTAL_ZERO CHECK
    (TOTAL >= 0),
    CONSTRAINT ORD_FOREIGN_KEY FOREIGN KEY (CUSTID) REFERENCES
    CUSTOMER (CUSTID),
    CONSTRAINT ORD_UNIQUE UNIQUE (ORD_NO)
    -- or a simpler table example
    DROP TABLE ORDER_TEST;
    CREATE TABLE ORDER_TEST (
    ORD_NO NUMBER (8),
    ORDERDATE DATE,
    CUSTID NUMBER (8) NOT NULL,
    SHIPDATE DATE,
    TOTAL NUMBER (8,2) CONSTRAINT TOTAL_ZERO CHECK
    (TOTAL >= 0),
    CONSTRAINT ORD_UNIQUE UNIQUE (ORD_NO)
    note: ORD_NO can also be a primary key
    If you are doing the INSERT during runtime from a form first
    create a sequence in SQL PLUS to handle the ORD_NO value:
    Create SEQUENCE ORDERNO_UNIQUEVAL_sqnc
    START WITH 000001
    NOMAXVALUE
    NOCACHE;
    and reference it as the ORD_NO parameter in your INSERT
    statement:
    ORDERNO_UNIQUEVAL_sqnc.NEXTVAL
    note: to maintain data integrity you must use the sequence
    everytime you insert a new order to table. To start a new
    sequence drop the sequence and re-create it with whatever "START
    WITH" value you want.
    Hope this helps
    Kevin

  • Allow only one set of parameter values for all worksheets

    I would like to " Allow only one set of parameter values for all worksheets ", but prompt before executing the worksheet. This function is a great time saver, but the users on occasion would like to change at the least one of the parameters. Is this possible? What setting do I use? I've tried various combinations of the " After opening a workbook: " on the options page. " Run query automatically", " Don't run query (leave sheet empty) ", and " Ask for comformation ". I would have thought that "Ask for comformation " was the trick, but no. I'm considering putting a do nothing parameter that has the setting of " Allow different parameter values for each worksheet. " so that it will keep all the others, default this one, but prompt for a possible change.
    Any thoughts...
    Thanks,
    Jamie

    Hi Jamie
    Even though you have the same parameter for all worksheets a user can still choose what to use on a worksheet. Its just that if they click to another worksheet then that parameter will be applied.
    Which version of Discoverer are you using?
    Best wishes
    Michael

  • Get unique value for a range of values from a table

    Please help to identify the sql to get unique value for following scenario
    Table A has 3 columns
    column1 column2 column3

    user7666373 wrote:
    Please help to identify the sql to get unique value for following scenarioUnique combinations of three columns? If so:
    select DISTINCT column1,column2,column3 from A;SY.

  • SRM 4.0- How to set the default values for product type (01) only for SC

    The radio button “Service” should not be visible.
    Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
    How to set the default values for product type (01) only for SC
    We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
    Here we can set defalut value 01 but it is not correct one since same search help is using several places.
    We need to limit the search help results only for SC.
    Kindly help out me ASAP.

    The easiest way to set defautl values is to edit the batch class.
    Goto the characteiristic and go to update values.
    In here you probably have something like 0 - 100 as a spec range.
    On the next line enter the default value within this range.  At the end of the line, click in the box in the column labelled "D".  This indicates the defautl value for the characteristic.
    If you need to you can do this in the material classification view as well.
    Just to be clear, these values will only show up in the batch record.  You can not have defautl values in resutls recording screens.
    FF

  • How to set a default value for particular field in SRM PO Portal

    Dear Gurus,
    Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
    My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
    I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
    Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
    Thanks in advance...
    Regards,
    Sathish

    Dear Laurent,
    Thanks for your response,
    But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
    My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
    Kinly guide me how to get the particular node of field in the Purchase order screen.
    Thanks you in advance,
    Sorry for the inconvenience if any
    Regards,
    sathish

  • Setting default field values for multi-line text fields in lists?

    For the multiple lines of text field in a list, I'm using SharePoint Designer 2013 to set a default
    value for the field, but I need that default value to include rich text formatting (the default value includes a formatted table). Is this possible without having to delve into JavaScript? And if so, how?

    Yes, we can :)
    You can do it with powershell
    $web = get-spweb <yourweb>
    $list = $web.lists["<yourList>"]
    $field = $list.fields["<yourField>"]
    $field.DefaultValue = "place your html code here"
    $field.update()
    hope that helps

  • How to set a new value for formula field in crystal reports xi?

    <p>How to set a new value for formula field in crystal reports xi?</p><p>//formula</p><p>{@description}</p><p> </p><p>exemplo in VB6</p><p>crxSubreport.FormulaFields.Item(1).Text =  "&#39;Subreport Formula&#39;"  or</p><p>crxSubreport.FormulaFields.Item("description").Text =  "&#39;Subreport Formula&#39;"</p><p>How to in JRC?</p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p>

    Hi,
    This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
    Regards,
    <p>Blair Wheadon</p>
    <p>Product Manager, Crystal Reports</p>

  • How to set the Default values for Info Objects in Data Selection of InfoPac

    Hi All,
    Flat file Extracion:
    How to set the Default values for Info Objects in Data Selection Tab  for Info Package
    ex: Fiscal Year Variant  Info Object having values 'K4' 'Y2' etc  in Flat file
    Initially  default value(not constant)  for this info Object value should be 'K4'  in Info Package
    If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
    Rgds,
    CV

    Hi,
    suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
    haritha

  • User defined function to set a default value of a column

    Hi All
    Can we use user defined function to set a default value of a column ??
    for example:
    create or replace  function test1  return number is
    begin
    return 10;
    end;
    create table testt
    (id  as test1,
      name varchar2(20));
    error:
    ORA-02000: missing ( keywordThanks
    Ashwani

    174313 wrote:
    MichaelS for showing example to use function in table ddl , otherwise i was thinking we cannot use function in table ddl as per error I received.That was an example of a virtual column.
    ORA-04044: procedure, function, package, or type is not allowed hereUsing PL/SQL code like that raises 2 basic problems. If that PL/SQL code for the calculating the column default breaks, what happens to the SQL insert statements against that table. These will need to fail as the table definition depends on the PL/SQL code. This is problematic as this dependency simply increases the complexity of the SQL object.
    The 2nd issue is performance. PL/SQL code needs to be executed by the PL/SQL engine. This means a context switch from the SQL engine to the PL/SQL engine in order to determine the default value for that column. Context switching is a performance overhead.
    So even if it was possible to use a PL/SQL function as parameter for the SQL default clause, I would not be that keen to use it.

  • Can we set a default value for the container variable in BPM?

    Can we set a default value for the container variable.?
    Suppose if i have a loop step and i have given a container variable i=5 as end condition.What value will it take during its first execution?Can we set the value for container before a recieve step?

    Hi
    Define Container Variable of Type integer and Category Simple Type .Use Condtion in Loop.
    In Container Operation Step Assign value and Use Expression to
    Increase or Decrease Valus according to your operation.
    look Pattern 4 in this blog to understand Container Operation
    /people/sharathchandra.girmaji/blog/2008/09/11/bpm-with-patterns-explained-part-1

  • How to set the default values for print options

    Hi all,
    We can set the default value for print options, just like Logical destination、numbers of messages、print immediately and so on, so where we should to maintain these default?

    Hi Sandy,
    This can be done by an abaper by making changes in the driver program. The Driver program feeds all the data which u have mentioned for printing.
    if the driver program is standard. copy to an z type and make modification on printer settings on the driver program code.
    this will surely solve the issue.
    Regards
    Gunaseelan

Maybe you are looking for

  • Can anyone help with this crash report? Safari repeatedly crashing...

    Process: Safari [478] Path: /Applications/Safari.app/Contents/MacOS/Safari Identifier: com.apple.Safari Version: 5.1.10 (6534.59.10) Build Info: WebBrowser-75345910~1 Code Type: X86-64 (Native) Parent Process:  launchd [117] Date/Time: 2013-11-10 10:

  • Once photos transferred from iPhone 4S to PC, unable to edit them.

    I transferred all photos from my iPhone 4S to my PC (Windows Vista). They are in my Windows gallery. However, I am not able to edit them. I want to rotate them, as most of them are sideways.. My PC gives me this error message "This photo cannot be sa

  • Gnome-power-manager update causes backlight to power off frequently

    After the upgrade to gnome-power-manager 2.26.1-1 today, my laptop screen backlight is being powered off constantly, after only about 1 minute. It's not the screen blanking, but the backlight going off. It comes right back up if I do anything on the

  • Problem with  Handling  Exception  in Jsp

    hi I am unable to handling exception in Jsp. In my Simple Form i taken a simple text field named salary. Details.jsp <%@ page language="java" isErrorPage="true" errorPage="Det.jsp"%> <%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html"%> <%@ tagli

  • Working with files(please help:))

    Hello , i am a beginner in java, well, i am trying to write a program which will read data from a text file and output it in another text file. Actualiy i have done that. already:) The problem is that the data of the input file need to be sorted in a