Can we set a default value for the container variable in BPM?

Can we set a default value for the container variable.?
Suppose if i have a loop step and i have given a container variable i=5 as end condition.What value will it take during its first execution?Can we set the value for container before a recieve step?

Hi
Define Container Variable of Type integer and Category Simple Type .Use Condtion in Loop.
In Container Operation Step Assign value and Use Expression to
Increase or Decrease Valus according to your operation.
look Pattern 4 in this blog to understand Container Operation
/people/sharathchandra.girmaji/blog/2008/09/11/bpm-with-patterns-explained-part-1

Similar Messages

  • Can we have a Default Value for the dashboard prompt ?

    Hi
    I have a requirement as when we run the dashboard, dashboard prompt should be defaulted with a value for the first time.
    Defaulting the values is done by SQL Results,but when i try to change the values for that prompt it is not showing any other values other than the defaulted prompt.
    Ex: I have a dashboard prompt as Employee Name and i have defaulted the value for that with 'Scott' and ran the dashboard.
    When i try to run it for different employee i am not able to get other values to be selected.
    Do we have any mechanism as such we can have default value when we run the dashboard for the first time and then all the values when we run it for the second time?
    Thanks

    user12846884 wrote:
    Defaulting the values is done by SQL Results,but when i try to change the values for that prompt it is not showing any other values other than the defaulted prompt.
    ThanksYou do something wrong. What is the version of OBIEE? How do you create prompt?

  • Tax codes - can you set up default value for rows and freight? HELP!

    Hello - I have two issues with tax codes:
    1. When adding  a sales order if any of the rows do not have a value for "Tax Code"  I will get an error "Row without tax was found".
    - How can I get all rows on my sales orders, documents, etc to default to a specific tax code? Or will users ALWAYS have to enter the tax code?
    2. When addring a sales order with Freight, if the order is added without adding a tax code to the freight I will get an error "Expense with tax was found"
    - How can I get the tax code have a default value? We always use the same tax code, so it is redundant to have to enter this information.
    Any suggestions?

    Hi Jhon,
    this is the simplest and best way to make a Tax Code default is Go to
    Answer for Question 1
    Administration -> Setup -> Financial ->  Tax -> Tax Code Determination (Click on this)
    in that screen you can set a default tax code for both sales as well as Purchase.
    If you want to set Tax Code based on Vendors or Customers or Items separately then you can use the Key Fields.
    Answer for Question 2
    Once you enter the Tax Code in the freight i think it takes the Tax Code itself, I'm not so sure about this one though.
    Hope this helps you out
    regards,
    Shreyas

  • How can I set a default zoom for the browser (freeze it)?

    Hello, there's an option of using the Ctrl + + to zoom the Web page, but it reverts to the Firefox default zoom in the midst which is very annoying. Generally, I'd like to be able to set a certain default zoom level and then only if needed use the CTRL +/- zoom in and out options. So my optimal zoom level is used for all my browsing unless I change it.

    I have listed 2 add-ons below for you to consider. I have not used NoSquint, but I use and rely on Default FullZoom Level.
    *You can set a default zoom level in DFZL Options
    *You can use the mouse scroll wheel on the Add-on Bar DFZL icon to increase or decrease the zoom or click the icon and choose from the available zoom percentages.
    *In NoSquint, it says it saves the zoom level by web site/page.
    *'''''Default FullZoom Level''''': https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/
    *'''''NoSquint''''': https://addons.mozilla.org/en-US/firefox/addon/nosquint/
    **More info on NoSquint: http://urandom.ca/nosquint/
    You can also set a "Minimum Font Size" in Firefox Options > Content > Fonts & Colors Advanced".
    *See --> [https://support.mozilla.com/en-US/kb/Options%20window%20-%20Content%20panel#w_fonts-colors Options window-Content panel-Fonts & Colors]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Setting a default value for a substitution variable

    Hi,
    I want to ask a user to enter a value for ORDER_DATE and, if he enters nothing, give the ORDER_DATE a default value.
    Here is what I've got so far:
    SELECT ORDER_AMOUNT, ORDER DATE
    FROM PURCHASE_ORDER
    WHERE DATE>'&start_date'
    The user is then prompted for start_date and, if they hit Carriage Return they get an error. I want them to be able to hit it and get a default start date of, let's say 01-01-90.
    Any suggestions?

    Something like
    SELECT 'Test'
    FROM dual
    WHERE sysDATE>NVL('&start_date', to_date('01-01-1900', 'DD-MM-YYYY'))
    /

  • How can one set a default location for the pictures on the hard drive?

    Since Windows normally places the pictures on a typical drive as "My Pictures" about four or five levels down from the root, any effort to import picture files into Lightroom requires multiple clicks to drill down to the "My Pictures" then (for example) year, month, date, etc.
    Can I define a location as the default starting point to find the pictures?  I don't see how to put that into presets. Or can a key shortcut be created to go straight to c:/users/name/mypictures/2013/April15 etc?
    Steve Board

    dj is right. Any Folder can be a picture folder.
    Create a root level folder and add it to your Pictures Library in Windows.  It will show up with all the scattered pictures from other programs. It can even be a different dirve if you like.  You  can even specify one to be the default save location for pictures in this dialog.
    Navigate to Pictures in your Libraries in Windows Explorer Right Click and select Properties.
    Message was edited by: Rikk Flohr forgot the instructions...

  • Can you set a default value using Data Mover Scripts?

    Hi,
    We're going through a upgrade of PS Fin 8.9 -> 9.1. We've found some existing tables with new columns that are marked as NOT NULL so we're having trouble migrating the data using DMS.
    Is there a way to Export the data from 8.9 and when importing into 9.1, set a default value for the new column using DMS?
    A specific example would be the PS_SOURCE_TBL where EXCHANGE_RATE_OPTN is new and NOT NULL.
    Thanks for any assistance.

    What you could do is first rename the record to be imported
    IMPORT SOURCE_TBL AS PS_SOURCE_TBL_ORG;
    Then write a insert/select script from PS_SOURCE_TBL_ORG to PS_SOURCE_TBL defaulting column EXCHANGE_RATE_OPTN
    Insert into PS_SOURCE_TBL (COLUMN,COLUMN,COLUMN,COLUMN, EXCHANGE_RATE_OPTN)
    select PS_SOURCE_TBL_ORG (COLUMN,COLUMN,COLUMN,COLUMN, 'defaultvalue');
    And then drop table PS_SOURCE_TBL_ORG to clean up your database.

  • How to set a default value for a drop down list box and then apply cascading based on the default value in Infopath 2010.

    Hello Everyone
    I have two drop downs. Both are coming from look up fields from two lists. i want to set a default value(first list item) for the first drop down list box and then apply cascading based on the default value for the next drop down list box. I found one article(http://www.bizsupportonline.net/infopath2010/display-first-item-drop-down-list-box-infopath-2010.htm)
    where in i can set a default value but i can't apply cascading based on that default value. Any suggestions would be highly appreciated.
    Thanks
    Ramanjulu Naidu N

    Hey Ramanjulu,
    Take a look at the below article which I believe will answer your question.
    http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
    Daniel Christian (MCTS)

  • Need to set default values for the fields plant and location in ME21N

    Hi All,
    i need to set default values for the fields plant and location in ME21N tcode.
    In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
    How to resolve this?
    Thanks in Advance

    hi .
    i needed to set default strorage location and plant in personal setting  in me21n.
    i solve it with this way.
    go to program SAPLMEPERS in se38.
    create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
    in this module write:
    if MEPOITEM_PROP-WERKS is INITIAL and  MEPOITEM_PROP-LGORT is INITIAL.
    MEPOITEM_PROP-WERKS = '1000'.
    MEPOITEM_PROP-LGORT = '0032'.
    endif.
    this is the solution.
    best regards.
    maryam

  • How to set a default value for particular field in SRM PO Portal

    Dear Gurus,
    Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
    My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
    I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
    Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
    Thanks in advance...
    Regards,
    Sathish

    Dear Laurent,
    Thanks for your response,
    But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
    My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
    Kinly guide me how to get the particular node of field in the Purchase order screen.
    Thanks you in advance,
    Sorry for the inconvenience if any
    Regards,
    sathish

  • What are the default values for the NetStream.multicast***** properties

    I read the api document about NetStream.multicast**** properties, but found no default values were given. Will the default values be changed when FP10.1 release?? Or, the values are always changing at runtime?
    I have a web-tv application, it broadcast some live videos created by my friends, I think that the latency and lag-time can be bigger in my app, I want to know the recommended default values for the multicast*** properties.
    I think the multicastWindowDuration and liveDelay are the keys. And I am confused between NetStreammulticastWindowDuration and NetStream.bufferTime..they like the same...
    Sorry for my poor english, Thanks.

    the publisher can set the multicast properties you listed to be the defaults for all of the subscribers of the stream.  in addition, the publisher can select whether or not "push" mode is used by changing NetStream.multicastPushNeighborLimit.  setting the limit to 0 disables push, setting it to non-zero enables push in the mesh, but only changes the actual push neighbor limit for the publisher.  if push is enabled for the stream, each peer will use push mode, but will start out with the global default limit (which is currently 4).  this is for safety.  we recommend you always leave push enabled.
    each peer (including the publisher) can change the multicast stream parameters dynamically.  changes are local to that peer.
    for the publisher to set the initial parameters for the stream that all peers will inherit as the default, the parameters must be changed on a new NetStream *before* NetStream.publish() is called.  example:
       var ns:NetStream = new NetStream(netConnection, groupSpecification);
       ns.multicastWindowDuration = 10; // change default for everybody
       ns.publish("mystream");
       ns.multicastWindowDuration = 15; // change window duration just for publisher, everybody else will start with 10 for this stream
    each subscriber can override the multicast stream properties locally, but the overrides must be set on the NetStream *after* receiving a NetStream.MulticastStream.Reset NetStatusEvent.NET_STATUS event in order for the override to stick.  overrides must be reapplied each time the NetStream.MulticastStream.Reset event is received.

  • How to set a default value for a page item

    I am working with a facility table that has name and address information. The user can add contact name information on a separate page. Since the address for the facility and contact is usually the same, I want to add a default value for the contact address. The facility page is on 201 and the link to add a new contact row is on page 202. I showed in the default value :P201_street for the contact's address. But, when I run the page, the contact address field shows the :P201_street, not the actual facility address. What am I leaving out? Must be something obvious?!
    Thanks very much.
    Judy

    In the default value, I showed: v('P201_STREET1') with the default value type of: PL/SQL Expression and received the following oracle error ==> Item default is not a PL/SQL expression. Use &ITEM syntax. The v('ITEM') syntax is not valid for item defaults. So I changed it to: &P201_STREET1 and got another oracle error , ERR-9132 error in PLSQL expression for item default code, item=P202_STREET1.
    Any more suggestions? Thx.
    Judy

  • Default values for the controlling area and language

    Hello
    I have a query.
    I need to set default values for the controlling area and language in the screen
    "find account assignment data 1"
    Is it possible to do so?
    Thanks.
    Jayawant Gokhale

    Hello
    To clarify,
    This is the search used ,when I go for shopping.For the Cost assignment,the fields controlling area and language should be default for a user.
    Could someone throw a light on this.
    Thanks.

  • Set a default value for a radio button populated with a List of value

    Hi,
    I am using jdeveloper 11.1.1.3.0. I need to set a default value for a radio button populated with a List of value(Yes/No). Here's the selectonechoice code.
    <af:selectOneRadio value="#{bindings.Code.inputValue}"
    label="#{bindings.Code.label}"
    required="#{bindings.Code.hints.mandatory}"
    shortDesc="#{bindings.Code.hints.tooltip}"
    id="sor1" autoSubmit="true"
    valuePassThru="true" layout="horizontal">
    <f:selectItems value="#{bindings.Code.items}" id="si1"/>
    </af:selectOneRadio>
    I want to have the selectonechoice set to No by default. In the previous versions, I set the default value in the base attribute VO. But it is not working in the new version.
    Thanks

    Hi,
    this should work in JDeveloper 11.1.1.3 the same as in 11.1.1.2. If it doesn't then it is better to file a bug than to work around it
    Frank

  • Can i set a default transition for final cut pro x

    Can I set a default transition for Final Cut Pro X? I'm doing a multicamera edit and would like all edit points to have a cross dissolve transisiton. Can I make this happen by default?
    Thanks!

    Cross dissolve is the default transition. It's applied with Cmd-T.

Maybe you are looking for