Want to refresh my variables value

Hi,
I have created a planning layout. whenever I execute this it will shows same values for variables. Actually I want this should looks as a blank and user will put some value. But whenever I execute this planning layout the variable shows some existing values.
I have try to clear this variable but didn't found the option in Planning area, Level, Layout etc.
Could you please suggest me how can I refresh my variables.
I'll assigned you the full marks.
Regards
Manoj

Hi Mayank,
Thanx for your reply and I had given you the points.
Also like to know We don't have any other option to refresh planning variable other than exit..?
If exit then I have to write a Function module and this function module attach to which function group...? If you could give me this details I'll be very thankful to you.
Regards
Manoj

Similar Messages

Wrong variable values on refresh

Dear Experts,
I have a issue in refreshing the query variable values.
Suppose we have a executed a report with the variables and values as follows:
Plant : 1000
Fiscal Year / Period: 001.2008 - 016.2008 ( Interval )
Material: XY and YZ ( Multiple single Values )
Query output is displayed and its fine.
We refreshed the query and changed the variable values as follows:
Plant: 1100
Fiscal Year / Period: 001.2007 - 016.2007
Material: YZ and executed the report.
Now we want to refresh the query variables. I clicked on refresh button. Query variable input screen is displayed with the
varaible values as follows:
Plant: 1000
Fiscal Year / Period: 001.2008 - 016.2008
Material : XY and YZ
My question is, if we refresh the variable values then the plant should show 1100 and Fiscal yr period as 001.2007 - 016.2007
and material as YZ. But they are showing the first set of values.
What may be the reason. Should we do any OLAP variable settings ?
Regards,
Bhadri M.

Hello,
Well if on 7.0, then try doing the following:
Pull all your restrictions variable to the char restriction side and dont keep any variable under the default values section.
Regards,
Shashank

How to pass the variable value to reports as a parameter

hi
i have facing a problem that i want to pass the value of a variable that i had calculate in a procedure like
SELECT nvl(BASIC_PAY,0) INTO v_basic FROM EMP WHERE EMP_ID=P_EMP_ID;
so i want to send the variable value v_basic as a parameter through form to report...and simlarly other variables values which i have calculate in procedure....
need ur help to solve this problem
thanks in advance

it's the exact posting from your last post. Please don't duplicate the postings, so that we can help you in one thread and not so many different threads

How can i insert the variable value in MS ACCES Query

i am creating one Query (query1) in MS ACCESS ( like we creaate Tables, Forms and Reports in MS ACCESS ) in this Query i have given 2 constent value in BETWEEN CLAUSE , after that i Created a CROSS QUERY which is based on the privious Query (query1).
Now i want to insert the variable value using JSP and HTML in to Query(query1).
Doing this i want to execute the Query (query1) with variable perameters and
wants to get the risponce form CROSS QUERY.
In this matter how can i insert the value in Query(query1) using JDBC and JSP.

The query is
Select ZMSGMAP.GROUP_CODE as 'group', ZMSDSTATE.STATE_DESC as 'state', ZMSTRN.YRMON, sum(ZMSTRN.CMAQTY) as 'qty' from ZMSDSTATE,ZMSGMAP,ZMSTRN Where ZMSTRN.STATE=ZMSDSTATE.STATE and ZMSTRN.PLANT=ZMSGMAP.PLANT_CODE and ZMSTRN.YRMON between "+p1+" and "+p2+" Group by ZMDGMAP.GROUP_CODE, ZMSDSTATE.STSTE_DESC, ZMSTRN.YRMONUsing this query i m trying to display the risult but the YRMON is displaying in a single column, i want to display it ia seperat columns. here p1 and p2 is YRMON(it is the yer month like 200102), for this solution i have created Cross table Query which is based on uper Query (query1) and design it column wise Display, it is givng the right display, but the problem is this i m not getting the technique throw which i can insert the variable values in to the query1 (which is designed in MS ACCESS).
u can contact me on [email protected] for more details.

How to increment variable value in single select statement

Hi guys
in this select statement i have hard coded date value but i need to put variable instead of hard coded date and then i want to increment that variable value till sysdate.. i have tried using curser , type tables but they are very very slow .. any experiance guys can give me good hint what should i use.
my query
select
start_dt,
end_dt,
hi_start_dt,
hi_end_dt,
ph_start_dt,
ph_end_dt,
h_start_date,
h_end_date,
g_code,
emp_det.ref,
u_code,
costing,
emp_nm,
emp_no
from
emp_det,
emp_ph_det,
emp_hi_det,
emp_h_det
where
emp_det.ref(+) = emp_ph_det.ref
and emp_hi_det.p_ref(+) = emp_ph_det.p_ref
and emp_h_det.ph_ref = emp_ph_det.ph_ref
and emp_h_det.ph_st_dt(+) = emp_hi_det.st_date;
and to_date('01-MAR-2008') between i.start_dt and nvl(i.end_dt, to_date('01-MAR-2008') +1)
and to_date('01-MAR-2008') between i.hi_start_dt and nvl(i.hi_end_dt, to_date('01-MAR-2008') + 1)
and to_date('01-MAR-2008') between i.ph_start_dt and nvl(i.ph_end_dt, to_date('01-MAR-2008') + 1)
and to_date('01-MAR-2008') between i.h_start_date and nvl(i.h_end_date, to_date('01-MAR-2008') + 1)
or
(----emp has left this month
i.start_dt < i.emp_end_dt
and i.end_dt between add_months(to_date('01-MAR-2008'), -1) + 1 and to_date('01-MAR-2008')
and i.hi_start_dt < i.hi_end_dt
and i.hi between add_months(to_date('01-MAR-2008'), -1) + 1 and to_date('01-MAR-2008')
and i.ph_start_dt < i.ph_end_dt
and i.ph_end_dt between add_months(to_date('01-MAR-2008'), -1) + 1 and to_date('01-MAR-2008')
and i.h_start_date < i.h_end_date
and i.h_end_date between add_months(to_date('01-MAR-2008'), -1) + 1 and to_date('01-MAR-2008')

Hi Anurag
Thanks for the reply.please find my sample data below . below i am only showing data for one employee only.. i want to write a query where i will query for a month like march 2008 and then i need to find out the record for employe where this month march 2008 is between all the start and end dates like it should be between start_dt and end_dt and h_start_date and h_end_date and hi_strt_dt and hi_end_dt and ph_start_dt and ph_end_dt and where all the combination are true show me that record only .. i don't want any other record.
h_start h_end_
start_dt      end_dt     date        date          histrt_dt hi_end_dt ph_start_dt ph_end_dt
1-Sep-07     31-Dec-08     8-Feb-08     31-Aug-08     1-Sep-07     31-Dec-07     8-Feb-08     31-Dec-08
1-Sep-07     31-Dec-08     1-Sep-07     31-Dec-07     1-Sep-07     31-Dec-07     1-Sep-07     31-Dec-07
1-Sep-07     31-Dec-08     1-Sep-08     31-Dec-08     1-Sep-07     31-Dec-07     8-Feb-08     31-Dec-08
1-Sep-07     31-Dec-08     8-Feb-08     31-Aug-08     1-Aug-08     31-Aug-08     8-Feb-08     31-Dec-08
1-Sep-07     31-Dec-08     1-Sep-07     31-Dec-07     1-Aug-08     31-Aug-08     1-Sep-07     31-Dec-07
1-Sep-07     31-Dec-08     1-Sep-08     31-Dec-08     1-Aug-08     31-Aug-08     8-Feb-08     31-Dec-08
1-Sep-07     31-Dec-08     8-Feb-08     31-Aug-08     1-Oct-08     31-Dec-08     8-Feb-08     31-Dec-08
1-Sep-07     31-Dec-08     1-Sep-07     31-Dec-07     1-Oct-08     31-Dec-08     1-Sep-07     31-Dec-07
1-Sep-07     31-Dec-08     1-Sep-08     31-Dec-08     1-Oct-08     31-Dec-08     8-Feb-08     31-Dec-08
1-Sep-07     31-Dec-08     8-Feb-08     31-Aug-08     1-Sep-08     30-Sep-08     8-Feb-08     31-Dec-08
1-Sep-07     31-Dec-08     1-Sep-07     31-Dec-07     1-Sep-08     30-Sep-08     1-Sep-07     31-Dec-07
1-Sep-07     31-Dec-08     1-Sep-08     31-Dec-08     1-Sep-08     30-Sep-08     8-Feb-08     31-Dec-08
1-Sep-07     31-Dec-08     8-Feb-08     31-Aug-08     8-Feb-08     31-Jul-08     8-Feb-08     31-Dec-08
1-Sep-07     31-Dec-08     1-Sep-07     31-Dec-07     8-Feb-08     31-Jul-08     1-Sep-07     31-Dec-07
1-Sep-07     31-Dec-08     1-Sep-08     31-Dec-08     8-Feb-08     31-Jul-08     8-Feb-08     31-Dec-08

Acrobat pro Extended | Passing variable value with Querystring

Hi,
We are facing issue with opening a web link with passing a variable value as query string parameter. We have added a form button on the pdf page, on click of it we have opened a web page and we want to pass a variable value in the query string. We can not give the hard code value in querystring, as the value keeps on changing.
Please refer to the images below.
here the data will be my variable name, which contains some value. When i execute it, it passes data as a string, i want to pass its value in the query string parameter. How i can do this?
I had found one more way, is to call a function on the form button click, and in that pass the query string parameter as a variable, it works. But the problem in this case i am faceing is, in the app.launchURL command i have to provide a http path, means something like http://www.google.com, then only it works. I have that page on my local (no server), so i want to add the path as onlu page.html
//Reference code, this fun will be called on a button click
function LaunchPage()
app.launchURL("http://www.aptara.com/page.html?value="+data+""); //this works
app.launchURL("page.html?value="+data+""); //this dosent works
Please do let me know, how i should proceed. To repeat, i want to invoke a page, which is on my local system with a querystring, in which i sud pass a variable value.
Thanks,
Ajit danve
Sr. Developer
Aptara, Pune.

re: George Johnson
Thank you for the response. This process that we are looking to do is necessary. We have 400+ OLD PDF forms that currently are printed by our print shop and then manually filled out and scanned into our system. The current process requires a clinician to log into our scanning system, identify a patient chart, and then identify the type of report they are scanning in. This process is time consuming with possibility of errors (wrong chart selected, wrong form, etc.). Plus, we have to stock up to 400 forms at each location.
We don’t have the funds to convert 400+ complex forms into electronic submissions where the form fields are discrete and file accordingly. So, what we have come up with to save costs of a new system and reduce potential errors is to add a barcode to each existing form.
Basically, each form will get a barcode and a javascript function in the onload event to process and parse passed in link parameters.
So when a clinician clicks on a form link in our EMR system the form will load passing in the patient acct. number and form name into the link parameters (all on our local intranet) so it will get embedded into the barcode on the form. They will then print the form fill out the data (or have the patient fill it out) and then drop it in the scanner. Our scanning system will automatically see the barcode and file the form under the correct patient and form folder based on the barcode info. (A scanned image of the form will save to the patient profile).
Ultimately we would like to convert all of these forms to electronic signature/submission but we do not have the funds or the time to do this.

Visual Composer - Variable values from VC to Query

Hello,
I am determining the URL dynamically using Function Module in VC, generate the necessary URL and execute the query... This part is working perfectly.
Now I want to pass a variable value to it as well.. Any ideas...
Thanks,
Om

Hi,
Try to use some function module which will convert query data into flat tables. (eg., RS_VC_GET_QUERY_VIEW_DATA_FLAT).
Hope this solves your issue.
Regards,
Vinay

User Variables values are not showing in Bex analyzer

Dear Friends,
I created a report in Bex analyzer ( Excel).
Now i want to show the variables values in the report.
i put text item there and click on it but in filter tab there is no variable is exist.
Any help will be highly appricated.
Regards
Naeem

dear i know how to display the variable values.
But unfortunatilly there is nothing appear in filter tab.
my variables are not in filter tab its empty.
i already choose the data provider.
regards
Malik

How to Call variable value in OLEDB Command SSIS

Hi ,
I am facing one issue in SSIS OLEDB Command.under OLEDB Command there is sql update query
    UPDATE dbo.ArchiveBBxFbapp
    SET LatestVersion = 0
    WHERE BBxKey = ?
dbo.ArchiveBBxFbapp is the name of the table, which I want to change by dynamically on fly.
table name I am getting from variable .
I want to take same variable value instead of hard coded table name in update statement.
suggest me the correct command
thanks and regards,
Vipin jha
Thankx & regards, Vipin jha MCP

For that you've to first store the query itself inside a variable after setting EvaluateAsExpression as true.
Then use expression as below
"UPDATE dbo." + @[User::TableName] +
"SET LatestVersion = 0
WHERE BBxKey = " + @[User::ColumnValue]
Use option as SQL command from variable for data access mode property
Then map the variable containing query above inside this OLEDB command.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Refresh input variables in Webtemplate

Dear All,
I have a command button in my webtemplate. when i click on this button it should give me variable selection screen to enter Country code in my input variable. My planning function will be executed for this country. But next time when i click this button its not asking me the variable selection screen.its taking the previous entered value. So i have to run the Webtemplate again to run the planning function for a different input variable.
Please tell me how to refresh the variable values so that i can get the Popup screen everytime i click the command button.
Thanks in advance.

Hi,
I have created one web template with one button group , and selected query having variable and exception as data provider.
For button group i have selected "OPEN_VARIABLE_DIALOG" (which is under All commands->command for webtemplate)as a command type. It is working fine.
Try this.
if it is useful assign points.
Regards,
Senthil Kumar.P

How to transfer variable value from one query to another query?

I create two queries which contain the same variable "Year" and "Month".
In the wad,Query1 is used to be a table and Query2 is used to show the chart in the condition with the same variable value of Query1
So I want to transfer the variable value from query1 to query2.
Can anyone help me ?

Let me explain the issue in detail.
In Query Designer, both the year and month variables are defined by user exit function to read current year and month and can be modified during the query runtime.
In WAD, Query1 is used to be a table with a table interface to hyperlink a chart which is defined by Query2 with the same variable value of Query1.
During the runtime of template, if I change the variable value of Query1 , I want the variable of Query2 to be changed automatically with the same new value.
So in the table interface of Query1 , I write the ABAP code in "SE24" and related source code to the variable is following:
concatenate
'function fire_urlJGSP_Col(filter) {'
Cl_rsr_www_renderer=>c_lf
'chart_url="' url '" + "&CMD=LDOC'
'&TEMPLATE_ID=GCCHART_9' "WEB ID of the work book
'&PAGEID=Graphics' "Name of the view
'&CMD=PROCESS_VARIABLES&SUBCMD=VAR_SUBMIT&VAR_NAME=Z2MYEAR&VAR_VALUE_EXT=" + filter'
Cl_rsr_www_renderer=>c_lf
'openWindow(chart_url,"chart_window","dependent=yes","600",'
'"450","true")'
Cl_rsr_www_renderer=>c_lf
into l_coding.
In this way , I can only transfer the year variable value from Query1 to Query2 and not two variables .
So , how shall I do to transer the two variable value in the same?

Using Variable values to populate virtual key figure

Hi Gurus,
I want to populate virtual key figure in my report. I am using BADI for this. To populte VKF I want to use the variable values in my calculation. For eg. variable name is ZCAL_MON based on 0CALMONTH. When the user enters some value in this variable say 03.2010 I want to populate VKF for the last 12 months (sum for a period 04.2008 to 03.2009). I have written a customer exit in CMOD for variables but for vkf I am using BADI. Can anyone tell me how do I pass the variable value in populating vkf and also how do I total for the last 12 months?
Utpal

Hi,
Did you find a solution. I'm just looking for the same thing.
best regards..

I want to set a variable with default value and can be changed by the user

hi,
i want to set a variable with default value and can be changed by the user, so i new a variable with setting : customer exit, single value, optional, ready for input.
in my customer exit code, i set a default value, eg. 20070530
when the variable screen popup, it display the default value 20070530, i changed it to 20070529, but it doesn't work , it still display the data in 20070530, how can i solve this problem?
your help is appreciated.

Liu,
As mentioned by Anil, you need to restrict your customerr Exit code to I_STEP = 1.
or.
<u>Open your Variable in change mode, in the Last Page os the Variable Maintenance you can provide default value. Note: you are doing same thing in Customer Exit. In your case no need of Customer Exit.</u>
Nagesh Ganisetti.
Assign points if it helps.

Change Bex Variable Value every time refresh query!

I'm looking for solution at this problem:
1) I've create a formula variable
2) I've assign to this variable a value in EXIT_SAPLRRS0_001 (step 2)
3) When run my query it's OK but the value of my variable is static!!
The problem is to change variable value every time the user change a filter like when do "Select Filter Value"...
How can I do this?

I know step 2 and this step is usefull for the first valorization of variable
but, for example, if I run the query with initial filter and after, in the navigation, I restrict the filter using "Keep Filter Value" on a single value of one characteristic the system doesn't execute the SAP EXIT and variable is the same of the first initial value...
I need a SAP EXIT or anything like it for change Formula Variable Value every time I change any filter during the query navigation.

Need to place a variable value at the end of report heading in BI 7

Dear All,
We have to place a variable value at the end of the report heading and the value should get refreshed whenever we change the variable by using "Change Variable Value". I have created a macro and the value will get triggered unless and until we click on any where on a sheet. But, we want to automate this one by using a macro.
Ex: Quarterly TA Host Country Details As Of "Variable Date" Variable is created on TA Date characteristic. User can enter date on Pop up window box at the time of changing a variable TA Date. We need changed date at the end of the Report heading Qua----
Please suggest me on how to place variable value at the end of report heading by using a macro.

No need to use Macro. You can use text variable.
Goto the Query Description and click on the Text variable icon.
Create a text variable of processing type as REPLACEMENT PATH and replace it with the characteristic for which you have a ready for input variable that will be eneter by the user.
This will populate the text variable with the value entered by teh user.
Use this text variabkle along with the Query Description. So your description will look something like REPORT_TITLE&TXT_VAR&
Hope this helps.

Want to refresh my variables value

Similar Messages

Maybe you are looking for