Want to round the value can any body suggest

hai all
i want to round the value and store it in on variable
eg:12334.789 as to 123345 it should be stored in some variable
suggest me please
thanks in advance
sindu

Hi,
You can Use either
FLOOR : Largest integer value that is not greater than 12334.789
or
CEIL: Smallest integer value that is not less than 12334.789
or
TRUNC :Interger part of 12334.789
Eg:
DATA: I TYPE I,
          X   TYPE P VALUE '12334.789 '.
I = FLOOR( X ).    output- 12334
I = CEIL( X ).          output- 12335
I = TRUNC( X ).      output: 12334
regards
Rakesh

Similar Messages

My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem. I am using snow leopard.

My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem. I am using snow leopard.

Try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
and PRAM How to Reset NVRAM on your Mac - Apple Support
If those don't help you can try a cleaning disc or a quick shot of compressed air. Chances are that your drive has failed, join the club it's not all that uncommon. You can either have it replaced or purchase an inexpensive external drive. Don't buy the cute little Apple USB Superdrive, it won't work on macs with internal drives working or not.

My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem.

My Imac is ejecting every disk inserted in it, I cannot access the disks, can any body help me troubleshoot the problem

The frist thing to try is a drive-n disk. They are cheap (US$5-15) and easy to use. Many unresponsive drives, even ones declared "dead" by an Apple tech, have returned to service after a cleaning.
Check with home entertainment specialty shops, electronic superstores and office supply outlets that sell computer accessories.

Hi i want to download BW , please can any body tell me that where can

hi i want to download BW , please can any body tell me that where can i have that
thanks
basu

BW is not available, as far as I am aware, for free download at this time.
matt

Can any body suggest the best institute which sap basis and netweaver admin

can any body suggest the best institute which sap basis and netweaver admin

Hi,
methodex is the best institute in hyderabad.
Thanks& Regards
sekhar

Hi everybody, i am using Apple ipad since two years. recently i forgot the apple id and password. i can't able to open my ipad. can any body suggest how to open my activate ipad

i can't able to activate ipad
I forgot the apple id and password.
can anybody tell how to get the apple id and password

try:
http://iforgot.apple.com
or
http://appleid.apple.com

Can any body help me by sending the config settings of delivery scheduling.

hi,
sap gurus,
in my project there is logistics execution module. here my concern is they are depending on district
and regions for fixing the frieght and all, so we have to schedule the deliveries to save the damarages
and warphage to the client.
can any body send me how the delivery scheduling and transportation scheduling cinfigured and
if there is any other than this.
plz let me know and help me on this.
regards,
balaji.t

Hi Balaji..
Just see weather this is helpful to your requirement...
Backward scheduling is the calculation of deadline dates: the arrival time at the customer site is calculated as the earliest possible goods receipt time at the customers unloading point on the requested delivery date. All four of the delivery and transportation scheduling lead times are subtracted from the customeru2019s requested delivery date to determine if this date can be met.
The transit time, loading time, and pick/pack time are subtracted from the customeru2019s requested delivery date to calculate the required material availability date.
The system calculates backward scheduling as follows:
Requested delivery date minus transit time = Goods issue date
Goods issue date minus loading time = Loading date
Loading date minus transportation lead time = Transportation scheduling date
Loading date minus pick/pack time = Material availability date
By default, the system will calculate delivery dates the closest day, taking into consideration the working days of the shipping point and a rounding profile. In this case the system assumes a 24 hour work day and lead times can be entered in days up to 2 decimal points. This is referred to as daily scheduling.
Precise scheduling calculated down to the day, hour and minute is supported. This allows the scheduling of a delivery within a single day. It is activated by maintaining the working hours for a particular shipping point.
Backward scheduling is always carried out first. If the material availability date or transportation scheduling date is calculated to be in the past, the system must then use forward scheduling.
Forward scheduling is also done if no product is available on the material availability date calculated by backward scheduling. The system does an availability check to determine the first possible date when product will be available. This new material availability date forms the starting point for scheduling the remaining activities. The loading time, pick/pack time, transit time, and transportation lead time are added to the new material availability date to calculate the confirmed delivery date.
Thanks,
Safeer Rahman

Pr00 decimal values needs instead off rounding the value

In export sales Pr00 condition value is rounding off i need to be in decimal values
i have checked in Condition type V/06 rounding fields it is not effecting and also OB90 and OY04
example rounding off 26 USD, but at actual it should 25.58 exchange rate is 43 and qty is 100
can any body suggests where the setting ar required

Hi,
Please check the Rounding rule property of the condition type 'PR00'. It must have been set to Round up rather than Commercial.
Change the Rounding rule property to Commercial. I guess this will solve your purpose.

Hi Experts can any body help in Batch management

Hi friends i created a batch and it is working fine... now the issue comes in sales order...
i have one product with two batches say batch no 150 units and batch no 2100 units customer places an order for 30 units and i issued 30 units with batch no 1 and saved the sales order. now the remaining balance of batch no 1 is 20 units and batch no 2 100 units. fine....
now got second order for 50 units system is issuing from batch no 2 where the balance is 100. from that batch system is allocating 50 units .. if this is the case then what happens to the remaining balance in batch no 1 how can i utilize the remaining balance in batch no 1 can any body suggest me the customization steps... pls...... advance thanks
rag sam

dear sam,
Check Automatic batch determination in MM02 of that material
This indicator allows the system to carryout batch determination automatically for a line item in the sales order.
siva

Uncaught Exception - Can any body please suggest what is wrong

SRM gurus,
Can any body suggest what is wrong with the below error
Fresh SRM 7 installation , all the configuration is complete but when shopping cart is created getting this error.
Checked the logical systems and all other setting everything is fine.
Not sure why this error is coming.
UNCAUGHT_EXCEPTION
Buffer table not up-to-date
Function: BBP_PD_ABORT of program SAPLBBP_PDH
Form: ABORT of program SAPLBBP_PD
Form: BUDGET_SC_CHECK of program SAPLBBP_PD
Form: PROCDOC_CROSS_CHECKS of program SAPLBBP_PD
Form: PROCDOC_DB_CHECK of program SAPLBBP_PD
Form: PROCDOC_CHECK of program SAPLBBP_PD
Function: BBP_PROCDOC_CHECK of program SAPLBBP_PD
Method: /SAPSRM/IF_PDO_BASE~CHECK of program /SAPSRM/CL_PDO_BASE===========CP
Method: /SAPSRM/IF_PDO_BASE~CHECK of program /SAPSRM/CL_PDO_BO_SC==========CP
Method: /SAPSRM/IF_PDO_BASE~CHECK of program /SAPSRM/CL_PDO_BO_SC_ADV======CP
Edited by: srisrm on Dec 12, 2010 4:57 AM

hi
please go through the note no sapnote_0001276694
regards
prakash

TS1538 hi i updated my iphone 4 with itunes and now i cannot use my phone as i keep getting error 16 after trying to restore my phone....i cannot afford to replace ..can any body help me...the phone is out of warrenty so apple do not want to know....pleas

hi i updated my iphone 4 with itunes and now i cannot use my phone as i keep getting error 16 after trying to restore my phone....i cannot afford to replace ..can any body help me...the phone is out of warrenty so apple do not want to know....please any help

https://discussions.apple.com/message/23100453#23100453
more hits from the search
https://www.google.dk/search?q=restore+itphone+error+16&oq=restore+itphone+error +16&aqs=chrome..69i57j0l5.11485j0j7&sourceid=chrome&espv=210&es_sm=93&ie=UTF-8

Can any body answer this-Want to set the cursor position in textfield.

i want my cusor position in textfield at the initial position which will come by default.
but when i'm using the textfields in an inner class i'm getting the cursor position at the end of the text in text filed.pls can any body answer this.
thanks in advance.
if want run this example.
import java.awt.*;
import java.awt.event.*;
class Testing extends JFrame implements ActionListener
     Container cnt;
     JButton jd;
     JTextField jt1;
     JTextField jt2;
     Testing()
          cnt = getContentPane();
          cnt.setLayout(new FlowLayout());
          jd = new JButton("OK");
          //jd.setBounds(50,50,100,30);
          cnt.add(jd);
          jd.addActionListener(this);
     public void actionPerformed(ActionEvent ae)
          Object but = ae.getSource();
          System.out.println("in action 00000");
          if(but.equals(jd))
               System.out.println("in action ");
               call();
               return;
     void call()
          System.out.println("in action 1111111111");
          Inner inn = new Inner();
          inn.jdlg.show();
     public static void main(String s[])
          JFrame jf = new Testing();
          jf.setSize(200,200);
          jf.show();
     class Inner
          JDialog jdlg;
          //JTextField jt1;
          //JTextField jt2;
          Container cnt;
          Inner()
               jdlg = new JDialog();
               JLabel jla = new JLabel("Label");
               jt1 = new JTextField();
               jt2 = new JTextField(5);
               cnt = jdlg.getContentPane();
               cnt.setLayout(new FlowLayout());
               cnt.add(jt1);
               cnt.add(jt2);
               jt1.setText("aaaaaaaa");
               jt2.setText("bbbbbbbb");
               System.out.println("the text "+jt1.getText());
               jdlg.setSize(200,200);

JTextFiled.setCaretPosition(0);

Can any body tell me how to make changes in the print layout of Fb03.

hi,
Can any body tell me how to make changes in the print layout of Fb03.
I want to add comapny address on the layout.
Regards
Mave

If you mean the correspondence, you have to change the configuration in Financial Accounting -> AR and AP -> Business Transactions -> Outgoing Invoices -> Carry Out abd Check Settings for Correspondence. There, you need to assign your custom Program or Layout for the Correspondence Type (like SAP19) and Program.
If you mean the display layout in transaction FB03, You can change a few settings, mainly with BKPF and BSEG fields. I don't think you can add company address, though.
Good luck,
Bhanu

Hi, i want to control my vi from multiple systems using ethernet options can any body tell me how to do that? thans in advance

hi, i want to control my vi from multiple systems using ethernet options can any body tell me how to do that? thans in advance

There are multiple ways of doing this. Here are some of them..
The Web Publishing tool allows you to publish the front panel and you can control the front panel remotely.http://www.ni.com/white-paper/2911/en/
The TCP/IP socket can allow you to pass codes "strings" to another computer. Lookup the server client example.
regards,
Gautham

On my macbook pro when opening a page i can not save it as a pdf only give me the option of saving it as a web page can any body help me on this I have tryed so many times without success

on my macbook pro when opening a page on safaryi can not save it as a pdf only give me the option of saving it as a web page can any body help me on this I have tryed so many times without success?

Just select Print in Safari and then, in the bottom left-hand corner, select PDF and you can save it to whichever flavor pdf file you like.
Clinton

Want to round the value can any body suggest

Similar Messages

Maybe you are looking for