WARNING:UtilitiesC - Message file "Xst.msg" wasn't found.ERROR:PersonalityModule

when i am trying to check syntax of my code in HDL Interface Node following errors had been occured
Release - xst J.33
Copyright (c) 1995-2007 Xilinx, Inc. All rights reserved.
WARNING:UtilitiesC - Message file "Xst.msg" wasn't found.
--> WARNING:UtilitiesC - Message file "PersonalityModule.msg" wasn't found.
ERRORersonalityModule - Unable to open definition file for Personality Module "virtex". Please make sure that it has been correctly installed.

Hello Jonah,
i was trying to implemet and addition of two numbers in Verilog code . I used NGC netlist file in the external files of the HDL Interface node. While checking for the syntax error, i getting the error.
i am attaching the program and also the screen shot of the error.
thanks,
sriveni.
Attachments:
Error while Checking Syntax.JPG ‏49 KB
Program.zip ‏175 KB

Similar Messages

"Audio File "Recording#27.aif" not found" Error Message- Please HELP!

Hi Everyone-
I was opening a podcast today to finish editing it and I got this error message, "Audio File "Recording#27.aif" Not Found" - and, naturally, when I opened the project, half of a phone interview was missing (or, rather, it shows up as purple balloons but each one says "File Not Found" inside). This file is the audio from the interviewer (the interviewee file is totally fine, as are all others in the podcast). When I load the project it asks if I want to search for this missing file, but when I click yes it says that it can't be found.
How can I find this file? What happened to it? Thank you for any ideas, suggestions, etc. For reference, I'm using GarageBand 3.0.4 on a MacBook Intel Core Duo 2Ghz and Mac OS X 10.4.11

no, GB wouldn't delete anything on it's own. it only deletes files for which you've deleted the entire region from the timeline and then saved
if the file is not within the projects, i'm afraid it's gone, and i can't think of any way that could happen by itself B-(>
Well i guess I should warn others that copying and pasting is very dangerous stuff! I had two podcasts- in podcast #1 GB saved the interview file as "Recording#27.aif" and in podcast #2 GB saved a little intro clip under the same name. When I pasted the intro clip from podcast #2 into podcast #1 my interview disappeared. I didn't delete it- I was never asked about it, I didn't delete the region from the timeline, etc. I have to assume that since they had the same name, GB thought I no longer needed the "Recording#27" from podcast #1 and now I can't find it anywhere! If anyone has any suggestions as to how I could find this file I would be very appreciative.

Need urgent help for (Message file sp1 lang .msb not found)

sir
c:\oracle9i this is my database folder name
c:\oraform this is my form folder name
which one my oracle_home name
sir i test this command
c:\ set ORACLE_HOME=c:\ORACLE9I
c:\ set ORACLE_SID=AAMIR
c:\ sqlplus / as sysdba
AND RUN SQL PLUS THEN SYSTEM GIVE ME THIS ERROR
incorrect environment variable plus_dflt program execution error
please give me idea how i run my system
thank

Duplicate post:
''Urgent'' incorrect environment variable plus_dflt program execution erro

Message-driven bean destination name not found error

Hi,
I am getting this error when I attempt to deploy the Warehouse message-driven bean example/tutorial. I followed the steps in the JMS Queue Simple Sample Application included with the server to set up the queue and queue factory, but I don't think the app. is even getting that far. I can not figure out why I'm get this error. I have looked at everything I can think of, but I'm obviously missing something. Here is the error from the server log.
INFO ( 2252): JMS5015: Install JMS resources ...
INFO ( 2252): JMS5002: Binding [< JMS Destination: jms/WarehouseQueue, javax.jms.Queue, [ imqDestinationName=WarehouseQueue ] >]
INFO ( 2252): JMS5002: Binding [< JMS Connection Factory: jms/WarehouseQueueConnectionFactory, javax.jms.QueueConnectionFactory, [ imqBrokerHostName=localhost , imqBrokerHostPort=7676 ] >]
INFO ( 2252): HTTP3072: HTTP listener http-listener-1 [http://ibankdev2:80] ready to accept requests
INFO ( 2252): CORE3274: successful server startup
INFO ( 2252): CORE5053: Application onReady complete.
INFO ( 2252): MDB00044: Deploying message-driven bean [MDBApp:Warehouse], consuming from [jms/Warehouse]
SEVERE ( 2252): MDB00015: [MDBApp:Warehouse]: Message-driven bean destination name [jms/Warehouse] not found
SEVERE ( 2252): javax.naming.NameNotFoundException
javax.naming.NameNotFoundException: Warehouse not found
at com.sun.enterprise.naming.TransientContext.doLookup(TransientContext.java:185)
at com.sun.enterprise.naming.TransientContext.lookup(TransientContext.java:157)
at com.sun.enterprise.naming.TransientContext.lookup(TransientContext.java:161)
at com.sun.enterprise.naming.SerialContextProviderImpl.lookup(SerialContextProviderImpl.java:78)
at org.omg.stub.com.sun.enterprise.naming._SerialContextProviderImpl_Tie._invoke(Unknown Source)
at com.sun.corba.ee.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:375)
at com.sun.corba.ee.internal.iiop.ORB.process(ORB.java:275)
at com.sun.corba.ee.internal.iiop.LocalClientRequestImpl.invoke(LocalClientRequestImpl.java:96)
at com.sun.corba.ee.internal.corba.ClientDelegate.invoke(ClientDelegate.java:237)
at com.sun.corba.ee.internal.corba.ClientDelegate.invoke(ClientDelegate.java:279)
at org.omg.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:457)
at org.omg.stub.com.sun.enterprise.naming._SerialContextProvider_Stub.lookup(Unknown Source)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:138)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at com.sun.ejb.containers.MessageBeanHelperBase.setup(MessageBeanHelperBase.java:317)
at com.sun.ejb.containers.MessageBeanContainer.<init>(MessageBeanContainer.java:206)
at com.sun.ejb.containers.ContainerFactoryImpl.createContainer(ContainerFactoryImpl.java:173)
at com.iplanet.ias.server.AbstractLoader.loadEjbs(AbstractLoader.java:345)
at com.iplanet.ias.server.ApplicationLoader.load(ApplicationLoader.java:81)
at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:134)
at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:110)
at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:294)
at com.iplanet.ias.admin.event.AdminEventMulticaster.invokeApplicationDeployEventListener(AdminEventMulticaster.java:424)
at com.iplanet.ias.admin.event.AdminEventMulticaster.handleApplicationDeployEvent(AdminEventMulticaster.java:408)
at com.iplanet.ias.admin.event.AdminEventMulticaster.processEvent(AdminEventMulticaster.java:291)
at com.iplanet.ias.admin.event.AdminEventMulticaster.multicastEvent(AdminEventMulticaster.java:99)
at com.iplanet.ias.admin.server.core.channel.AdminChannelServer.sendNotification(AdminChannelServer.java:84)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:261)
at sun.rmi.transport.Transport$1.run(Transport.java:148)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:144)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
at java.lang.Thread.run(Thread.java:536)
SEVERE ( 2252): MDB00030: [MDBApp:Warehouse]: Exception in setting up message-driven bean container: [MDBApp:Warehouse: Message-driven bean destination jms/Warehouse not found]
SEVERE ( 2252): MDB00017: [Warehouse]: Exception in creating message-driven bean container: [javax.jms.JMSException: MDBApp:Warehouse: Message-driven bean destination jms/Warehouse not found]
SEVERE ( 2252): javax.jms.JMSException
javax.jms.JMSException: MDBApp:Warehouse: Message-driven bean destination jms/Warehouse not found
at com.sun.ejb.containers.MessageBeanHelperBase.setup(MessageBeanHelperBase.java:340)
at com.sun.ejb.containers.MessageBeanContainer.<init>(MessageBeanContainer.java:206)
at com.sun.ejb.containers.ContainerFactoryImpl.createContainer(ContainerFactoryImpl.java:173)
at com.iplanet.ias.server.AbstractLoader.loadEjbs(AbstractLoader.java:345)
at com.iplanet.ias.server.ApplicationLoader.load(ApplicationLoader.java:81)
at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:134)
at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:110)
at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:294)
at com.iplanet.ias.admin.event.AdminEventMulticaster.invokeApplicationDeployEventListener(AdminEventMulticaster.java:424)
at com.iplanet.ias.admin.event.AdminEventMulticaster.handleApplicationDeployEvent(AdminEventMulticaster.java:408)
at com.iplanet.ias.admin.event.AdminEventMulticaster.processEvent(AdminEventMulticaster.java:291)
at com.iplanet.ias.admin.event.AdminEventMulticaster.multicastEvent(AdminEventMulticaster.java:99)
at com.iplanet.ias.admin.server.core.channel.AdminChannelServer.sendNotification(AdminChannelServer.java:84)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:261)
at sun.rmi.transport.Transport$1.run(Transport.java:148)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:144)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
at java.lang.Thread.run(Thread.java:536)
SEVERE ( 2252): EJB5090: Exception in creating EJB container [javax.jms.JMSException: MDBApp:Warehouse: Message-driven bean destination jms/Warehouse not found]
SEVERE ( 2252): appId=MDBApp moduleName=EJBModule_Warehouse_jar ejbName=Warehouse
SEVERE ( 2252): LDR5004: UnExpected error occured while creating ejb container
javax.jms.JMSException: MDBApp:Warehouse: Message-driven bean destination jms/Warehouse not found
at com.sun.ejb.containers.MessageBeanHelperBase.setup(MessageBeanHelperBase.java:340)
at com.sun.ejb.containers.MessageBeanContainer.<init>(MessageBeanContainer.java:206)
at com.sun.ejb.containers.ContainerFactoryImpl.createContainer(ContainerFactoryImpl.java:173)
at com.iplanet.ias.server.AbstractLoader.loadEjbs(AbstractLoader.java:345)
at com.iplanet.ias.server.ApplicationLoader.load(ApplicationLoader.java:81)
at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:134)
at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:110)
at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:294)
at com.iplanet.ias.admin.event.AdminEventMulticaster.invokeApplicationDeployEventListener(AdminEventMulticaster.java:424)
at com.iplanet.ias.admin.event.AdminEventMulticaster.handleApplicationDeployEvent(AdminEventMulticaster.java:408)
at com.iplanet.ias.admin.event.AdminEventMulticaster.processEvent(AdminEventMulticaster.java:291)
at com.iplanet.ias.admin.event.AdminEventMulticaster.multicastEvent(AdminEventMulticaster.java:99)
at com.iplanet.ias.admin.server.core.channel.AdminChannelServer.sendNotification(AdminChannelServer.java:84)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:261)
at sun.rmi.transport.Transport$1.run(Transport.java:148)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:144)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
at java.lang.Thread.run(Thread.java:536)
WARNING ( 2252): CORE5021: Application NOT loaded: [MDBApp]
WARNING ( 2252): ADM5603:Event listener error [Error while deploying application [MDBApp]. Please refer to the server log for more details. ]
My bean name is Warehouse, jms/Warehouse is the JNDI and is mapped to MDBPack.WarehouseBean.class. MDBPack is in the classpath on the server. I guessed that the physical destination name was WarehouseQueue, but using Warehouse produced the same result. Please let me know if there is anything I could be missing. TIA
--Michelle

Hi,
You have not created the jms destination queue object
jms/Warehouse
Your server logs says it cannot find the destination queue object.It has got nothing to do with jndi name of your bean
Create jms destination queue object using
asadmin>create-jms-resource instance <instance_name> resourcetype javax.jms.Queue --property imqDestinationName=<NAme> jms/Warehouse
Then use list-jms-resources <instance_name> to
find if jms/Warehouse destionation queue object has been created.
Get back in case of any issues

Oracle error "No message file for" after Upgrade to 10.2.0.5

After upgrade from 9.2.0.8 to 10.2.0.5 i get the following error "No message file for"
(with both Users sidadm and orasid)
Platform AIX 64 bit
The installation und Upgrade with dbua works fine.
DB and SAP runs after the Upgrade.
then I tried
SQL> select xx from v$log;
select xx from v$log
ERROR at line 1:
ORA-00904: Message 904 not found; No message file for produstyle='font-
family:courier' ct=RDBMS,
facility=ORA; arguments: ["XX"]
The Environment is correct,
ORACLE_HOME,ORACLE_SID,PATH,LIBPATH have right Values.
I cant find any failure in Configuration or Install Logs.
So i tried the following:
Copy the complete Directorie /oracle/SID/102_64/rdbms/msg from a
10.2.0.4 Oracle Installation to the 10.2.0.5 home.
the result ist that the Messagefile could be read by Oracle an i get
the ORA-00904
Here the same Query:
SQL> select xx from v$log;
select xx from v$log
ERROR at line 1:
ORA-00904: "XX": invalid identifier
So I do the same procedure with an other System.
I detect:
the Patch 9952230 (SAP_102051_201011/9952230) delivers
both Message Files oraus.msg and oraus.msb which caused the problem.
Has anyone the same Problem?
Are there any other Impacts with wrong Message Files .
I raised a OSS Call, but no answer till today.
best regards
Uwe

I could not find anything is sap notes, but oracle recommends to update binary file oraus.msb in $ORACLE_HOME/rdbms/mesg
Download link:
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=10235783
You can find more details also in:
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=10235783.8
https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=10235783
The problem with this solution. It is not officially released by SAP.

After install of instant client 10.2, error Message file sp1 lang .msb not

Greeting.
I installed Oracle 10G. Was working great.
then installed PHP5. working great.
then TYPO3 (a web content manager) Still ok.
then I wanted TYPO3 to user my oracle 10g server.
One of the step was to install instant client (which I did)
Then I needed to reboot: My oracle 10G doesn't start anymore.
When trying SQLplus:
Error 6 initializing SQL*Plus
Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
I do have this file:
find / -name sp1us.msb
find: /proc/6014/task: No such file or directory
/oracle/product/10.2.0/sqlplus/mesg/sp1us.msb
here more info:
echo $ORACLE_HOME
/oracle/product/10.2.0
echo $ORACLE_SID
dubaidb
# lsnrctl start listener
LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 21-AUG-2009 13:45:55
Copyright (c) 1991, 2007, Oracle. All rights reserved.
TNS-01106: Listener using listener name LISTENER has already been started
find / -name sqlplus -print 2>/dev/null
/oracle/product/10.2.0/inventory/Templates/sqlplus
/oracle/product/10.2.0/bin/sqlplus
/oracle/product/10.2.0/oc4j/j2ee/oc4j_applications/applications/isqlplus/isqlplus/WEB-INF/classes/oracle/sqlplus
/oracle/product/10.2.0/sqlplus
/oracle/instantclient_10_2/sqlplus
It seems I got 2 sqlplus files: one in /oracle/instantclient_10_2/sqlplus and /oracle/product/10.2.0/bin/sqlplus
Logs info from /oracle/product/10.2.0/startup.log:
/oracle/product/10.2.0/bin/dbstart: Starting up database "dubaidb"
Fri Aug 21 13:18:49 EDT 2009
Error 6 initializing SQL*Plus
Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
Error 6 initializing SQL*Plus
Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
Thank you in advance

Well, what I ended up doing is the following:
Unset LD_LIBRARY_PATH
Backed-up my sqlplus in ORACLE_HOME/bin.
Backed-up my libraried in ORACLE_HOME/lib
Renamed instantclient to instantclient_bck
copied all libraries from instantclient_bck to ORACLE_HOME/lib
copied sqlplus from instantclient_bck to ORACLE_HOME/bin
dbshut
dbstart
Everything came back as it used to be :)

Lightroom 4.2. unable to import. message files were not imported because they cannot be read

Lightroom crisis:
suddenly, unable to import images into lightroom - A window comes up that says ""Following files were not imported because they cannot be read". I was in the process of importing images - 10 images were imported from the shoot then the import stopped.
I tested the card and the card readers by using cards from different cameras and using different card readers. I was able to import the images into a folder on my desktop so know nothing is corrupted.. The memory cards are good, my card readers are good. no setting have changed in my camera. Nothing has changed in my routine. Have been using lightroom for several years.
I import through a card reader, convert to DNG and save on an external hard drive. All very ordinary.
No one I have contacted has had nor knows of anyone who has had this problem.
Unable to get in touch with anyone at Adobe.
Thank you for any help or direction to tec support
Barbara Nelson
[email protected]

On a quick read, it sounds like the same issue that had me dead in the water for 7 days. (LR 4.2) I tested everything - my card readers are good, the memory cards are not corrupted, tried different cards from different cameras,etc. Working my way through all my tech savvy friends and professionals, I was lucky to connect with a great sr. tech person at Adobe. After trouble shooting all lightroom possibilities (3 hours on the phone) we checked my external hard drive where all the images are stored. Even tho the external hard drive had plenty of space and "told me" that it was healthy and functioning well, Adobe had me go into the external hard drive's properties/tools and do a "check for errors. 12 hours later after the program went though the drive one file at a time, it found errors, moved them to a separate folder, and now all is functioning OK. The hard drive had not crashed nor were any images lost. As can happen after some time there must have been a scratch or similar that prevented more images from being written (or read) to the drive. Even though all is working OK at this time, I will replace my external hard drive (and it's back up external drive).just in case there are more "bumps" on the external hard drive.
My tech knowledge is limited, and I am not intuitive about anything digital, so can't add any more information then the experience I had.
Barbara Nelson

I tried updating to itunes 10.5 and now when i try to open itunes i get a message saying "Apple application support was not found" error 2 (windows error 2)

Ok so I went to update my itunes 9 to itunes 10.5 and now I get and error message "Apple application support was not found" error 2 (windows error 2) when ever I try to run itunes and iv been trying to fix this for like a month and let me tell you iTunes for windows is **** and I really want Icloud for my iphone 4 and yes iv tried uninstalling everything by apple in the correct order and reinstalling them after restart atleast honestly 20 - 30 times but nothing worked so if anyone can please help me I have windows 7 and a hp intel pentium computer

Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2

Microsoft.WebApplication.targets 182 5 error MSB3030 Could not copy the file because it was not found

We use Visual Studio Online and the integrated continuous integration (build server) from Microsoft. We have a solution that contains multiple projects two of which are latest MVC projects. I updated a bunch of our Nuget packages yesterday and now we are
getting a build error one of our MVC projects. Any help is greatly appreciated as I have exhausted my resources trying to understand why the error is occurring!
We use nuget for our external libraries, the solution and projects and set to use Nuget Restore (no packages persisted in TFS).
We updated Angular to the latest version using Nuget updates inside of visual studio. Here an excerpt from packages.config in the project file. The first block is what was found in the packages.config before the update and the second block is after the
update.
<package id="Angular.UI.Bootstrap" version="0.11.0" targetFramework="net451" />
<package id="angularjs" version="1.2.23" targetFramework="net451" />
<package id="Angular.UI.Bootstrap" version="0.12.0" targetFramework="net451" />
<package id="angularjs" version="1.3.8" targetFramework="net451" />
After I noticed the build error I scheduled another build with Diagnostic level logging turned on, here is the excerpt from the build highlighting the errors
Task "Copy" (TaskId:395)
16:42:43.027 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-animate.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.031 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-animate.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Creating directory "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts". (TaskId:395)
Copying file from "Scripts\angular-aria.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-aria.js". (TaskId:395)
Copying file from "Scripts\angular-aria.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-aria.min.js". (TaskId:395)
16:42:43.033 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-cookies.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.033 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-cookies.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-csp.css" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-loader.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-loader.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Copying file from "Scripts\angular-messages.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-messages.js". (TaskId:395)
Copying file from "Scripts\angular-messages.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-messages.min.js". (TaskId:395)
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-mocks.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-resource.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-resource.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-route.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-route.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-sanitize.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-sanitize.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-scenario.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-touch.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-touch.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Copying file from "Scripts\bootstrap-select.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.js". (TaskId:395)
Copying file from "Scripts\bootstrap-select.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.min.js". (TaskId:395)
Copying file from "Scripts\bootstrap-select.js.map" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.js.map". (TaskId:395)
I looked at the change log of my check-in and noticed that the errors occur for Angular script references that were updated. New angular references (adds in the TFS changeset) are being copied without errors. Example: angular-animate.js was edited
in the Angular update in TFS but angular-aria.js is a new file in the package so new file in TFS.
Using Source Control Explorer I verified the location of the files, the new and the existing files from the Angular nuget package can all be found in the Scripts folder of the MVC project. I can also view the content of each file file without issue.
The references in the project file (csproj) are all consistent too, I can't see any differences between the files that cause failure and those that do not. The following block is a direct copy/paste from the csproj file
<Content Include="Scripts\angular-animate.js" />
<Content Include="Scripts\angular-animate.min.js" />
<Content Include="Scripts\angular-aria.js" />
<Content Include="Scripts\angular-aria.min.js" />
<Content Include="Scripts\angular-cookies.js" />
<Content Include="Scripts\angular-cookies.min.js" />
<Content Include="Scripts\angular-csp.css" />
<Content Include="Scripts\angular-loader.js" />
<Content Include="Scripts\angular-loader.min.js" />
<Content Include="Scripts\angular-messages.js" />
<Content Include="Scripts\angular-messages.min.js" />
<Content Include="Scripts\angular-mocks.js" />
<Content Include="Scripts\angular-resource.js" />
<Content Include="Scripts\angular-resource.min.js" />
<Content Include="Scripts\angular-route.js" />
<Content Include="Scripts\angular-route.min.js" />
<Content Include="Scripts\angular-sanitize.js" />
<Content Include="Scripts\angular-sanitize.min.js" />
<Content Include="Scripts\angular-scenario.js" />
<Content Include="Scripts\angular-touch.js" />
<Content Include="Scripts\angular-touch.min.js" />
Is there anything I forgot to mention that would help me figure out what is going on?
What else can I try with the exception of rolling back the changeset and re-adding the nuget package?
Thank you very much in advance!
-Igor
-Igor

Hi Igor,
For your situation, make sure you checked in your source files after updating Angular. You can also check the whether the foders for the Angular reference are under source control in source settings tab of your build definition.
You can also build locally using MSBuild to see if the building works fine. We have to make sure local build succeed before VSO build since TFS build use MSBuild as its default compiler. Check the links below to see if they are helpful:
https://social.msdn.microsoft.com/Forums/en-US/f43ceb9e-f253-46e3-a496-05f8cd77f634/msb3030-could-not-copy-the-file-because-it-was-not-found-error?forum=winappswithcsharp
https://social.msdn.microsoft.com/Forums/en-US/01a29ce7-da2a-40af-9dce-3db1f8998cc2/could-not-copy-the-file-consoleappnameexemanifest-because-it-was-not-found?forum=TFService
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to customize error message using oraus.msg file?

Hi,
Is there a way to modify the oracle error message (for example: instead of ORA-01481: invalid number.. we modify it to "hello ! use a valid format.." ), is it possible using the oraus.msg file if not is there a solution?
Many thanks

968420 wrote:
Hi Gauyav and Keith,
i thak you for your quick responses , but i want the customized message to be displayed wherever the oracle error appears (in oracle forms screens , sql tool requests, ) not only in pl/sql code,That is a really bad idea
{message:id=1007020}
It would render the database completely unsupportable by anyone, and based on the quality of exception handling that is generally seen on these forums would result in databases that simply don't work.
SQL> declare l_dummy number;
2 begin
3    select null into l_dummy from dual
4    where 0 = 1;
5 exception when others then
6    raise_application_error(-20666, 'It doesn''t work!');
7 end;
8 /
declare l_dummy number;
ERROR at line 1:
ORA-20666: It doesn't work!
ORA-06512: at line 6
as we've a lot of forms screens and it's not possible to modify all of them.These are strange kinds of forms that it is possible to create a lot of them but not possible to modify them.
Is there a solution for this?Fix the forms.

Warning 11 message in log files

I had Sun One Identity Synchronization for Windows working with AD. I removed the Message Queue when I upgrade another DS on the machine which broke the Idsync. I have reinstalled the packages for IMS3_0_1 that I removed. The Message Queue is starting and appears to be loading the correct data. However, when I do a /etc/init.d/isw start, the Idsync does not come up and I get the following error messages in isw watchdog error.log file:
[07/Jan/2005:15:53:42.351 -0700] INFO 10 "Log opened. Identity Synchronization for Windows build 2004.100.1537. Java runtime version is 1.4.2_04."
[07/Jan/2005:15:53:42.398 -0700] WARNING 11 m1ldap "The WatchDog failed to start process [Process Id [1105138422385] Name [CNN101] Execution Interval [60000] ]"
[07/Jan/2005:15:53:42.401 -0700] WARNING 11 m1ldap "The WatchDog failed to start process [Process Id [1105138422388] Name [Central Logger] Execution Interval [60000] ]"
[07/Jan/2005:15:53:42.410 -0700] WARNING 11 m1ldap "The WatchDog failed to start process [Process Id [1105138422387] Name [System Manager] Execution Interval [60000] ]"
[07/Jan/2005:15:53:42.413 -0700] WARNING 11 m1ldap "The WatchDog failed to start process [Process Id [1105138422386] Name [CNN100] Execution Interval [60000] ]"
I have another instance of Idsyc running, and have started the Message Queue using -verbose to compare if the two are starting the same and they are. Would anyone be able to tell me what the Warning 11 messages mean?
Thanks
Randy

Okay, this is resolved. I moved the jdk to another directory as well in an attempt to do some house cleaning. I thought I had made the necessary changes in all the right places. Just for the fun of it, I made a copy of the jdk to the original directory then everything started working again. So I am guessing that the Warning 11 message must mean that there is not a valid java executable for the components and subcomponenets to start.
Well, that saves me a weekend of work. Now onto other things!
Thanks
Randy

Recently received msg to download update to iTunes. When I did got message file MSVCR80.dll was missing. How do I get it back

Recently received msg to download update to iTunes. When I did got message file MSVCR80.dll was missing and update had failed. Now I can't even open iTunes. How do I get the file back

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99431)

I tried to open an Audacity file. I got the following error message: "Warning there is very little free disc space left on this volume. Please select another temporary directory in your preferences. How do I select another temporary directory?

I tried to open an Audacity file. I got the following error message: "Warning there is very little free disc space left on this volume. Please select another temporary directory in your preferences. How do I select another temporary directory?

Audacity > Preferences > Directories. You will probably need to use an external drive as it sounds like you Mac's drive is getting too full???

XML Report completes with error due to REP-271504897: Unable to retrieve a string from the Report Builder message file.

We are in the middle of testing our R12 Upgrade. I am getting this error from the invoice XML-based report that we are using in R12. (based on log). Only for a specific invoice number that this error is appearing. The trace is not showing me anything. I don't know how to proceed on how to debug where the error is coming from and how to fix this. I found a patch 8339196 that shows exactly the same error number but however, I have to reproduce the error in another test instance before we apply the patch. I created exactly the same order and interface to AR and it doesnt generate an error. I even copied the order and interface to AR and it doesn't complete with error. It is only for this particular invoice that is having an issue and I need to get the root cause as to why. Please help. I appreciate what you all can contribute to identify and fix our issue. We have not faced this issue in R11i that we are maintaining right now for the same program which has been running for sometime. However, after the upgrade for this particular data that the user has created, it is throwing this error REP-271504897.
MSG-00100: DEBUG: Get_Country_Description Return value:
MSG-00100: DEBUG: Get_Country_Description Return value:
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-271504897:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-271504897: MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: AfterParam_Procs.Populate_Printing_Option
MSG-00100: DEBUG: AfterParam_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 117
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choi
Report Builder: Release 10.1.2.3.0 - Production on Tue Jul 23 09:56:46 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.

Hi,
Check on this note also : Purchasing Reports Fail When Changing Output To XML REP-0002 REP-271504897 REP-57054 (Doc ID 1452608.1)
If you cant reproduce the issue on other instance, apply the patch on the test instance and verify all the funcionality related to the patch works OK. Then move the patch to production. Or you can clone the prod environment to test the patch.
Regards,

"file in use" and other "unexpected" error messages

I may have found a bug in Tiger, and in case nobody has a plausible explanation for the problem, I will send a bug report:
I copied a locked file (shows a little lock symbol in its icon) from one Mac to the other via a network share (using Finder). I then tried to open that file on the other Mac, but failed with the error message "file in use". But the computer the file had been copied from had already disconnected and shut down, and the Mac I had copied the file to had booted once.
I then looked at the file security settings, but found nothing abnormal. But I was not allowed to change any of the security settings (owner and permissions).
I then tried the Terminal and tried commands like "sudo chmod" or "sudo chown", and got nothing but error messages.
What kind of operating system does not allow the supervisor ("root") to change file permissions?!?
I then tried to repair the volume, but DiskUtility thinks all is OK. Fine. And the file is obviously NOT in use (otherwise the volume could not have been unmounted).
I finally tried the tool SetFileInfo from the development system to change permissions and type/creator. "sudo SetFileInfo -whatever" gives "unexpected error". Aha, "unexpected". So there is something wrong in Denmark. Or California.
At least there is one hint what's going wrong: GetFileInfo shows an abnormal type/creation combination, something like "brok" and "macs".
The only thing I finally managed to do with the file was "sudo rm". I got some warning about unknown user and unknown group and override whatever, then the file was deleted. At least I think so. After removing the "locked" flag the copy process went fine, and the copy of the file could be opened on the other Mac, so it seems that there is a problem with copying "locked" files.

Thank you for that hint! It does not fix the bug, but opens a way to a workaround.
I repeated the test, i.e. copied a locked file, and indeed the copy is protected with a "uchg" flag.
Removing the "uchg" flag still left the file locked, i.e. no other attribute (owner/group/rwx) could be changed. But the SetFile command now was able to remove the creator ('MACS') and type ('brok') settings.
After that the "second lock" had been removed, and now the "locked" attribute could be removed, and after having removed this third lock the file was accessible.
So I think that was enough of (unpaid) investigation, and I am going to send a bug report to Apple.

WARNING:UtilitiesC - Message file "Xst.msg" wasn't found.ERROR:PersonalityModule

Similar Messages

Maybe you are looking for