Warnings while simulation (install) BI content objects

Hi!
I am installing 0FIGL_C10 (simulation) from "BI Content". The system gives log with errors: some needed ifoobjects are not available in active version. I am istalling these infoobjects and one of them is 0COSTCENTER.
After simulation (install) of 0COSTCENTER I got yellow (not green) log with warnings:
1) Lower case makes selection of char values difficult;
2) Assigned InfoArea 0DB does not exist > NODESNOTCONNECTED.
I think I can ignore the 1) . But the 2) ? Need I to do anything?
Thanks,
Olga
Edited by: Olga Trofileeva on Sep 2, 2009 4:16 PM
Edited by: Olga Trofileeva on Sep 2, 2009 4:17 PM

1) Lower case makes selection of char values difficult
You're correct...this can be ignored. It's saying that this InfoObject has the 'Lowercase letters' checkbox checked, whereby lowercase characters will be accepted for input.
2) Assigned InfoArea 0DB does not exist > NODESNOTCONNECTED.
You can ignore this if you wish. This just means that the 0DB InfoArea has been activated and that the InfoObject is being put into the Not Assigned (default) InfoArea. You could, if you wish, activate the 0DB InfoArea from BI Content too. Either way, it can either be ignored as is or you can activate the standard content InfoArea.

Similar Messages

  • Error Installing BI 7 cont "Cannot install BI content, Objects are missing"

    I am trying to activate all the infobjects in BI 7 for the Plant maintenance, QM and CS. While simulating the activation, I get the message:
    "Cannot install BI content, Objects are missing"
    Does anyone know what's going on?
    Thanks
    B

    What service pack are you on ?
    Try note 1019055
    Also - Are there any short dumps ?
    Message was edited by:
            A S

  • Installing BI Content objects for SRM

    Hi Experts,
    I am new to this group and i need your help for installing Business Content Objects for SRM based data flow.
    We are working for a BW - SRM upgrade project and as per our requirements we need to build 11 -  BI standard reports based on Shopping Cart, Shopping Cart Approvar &  Central contracts. We have identified the relevant data sources (0BBP_TD_SC_1, 0BBP_TD_SC_APPR_1 ,  0BBP_TD_CONTR_2) info providers/ characteristics & keyfigures from help.sap.com respective with query details.
    We have checked in BW system and do not found any objects under SRM info area (infoobjects/info providers).  As a first step we have activated the above said data sources in SRM system through RSA5 and ensured the data avaialbility through extractor check in RSA3.
    We have replicated the Meta data and got the data soruce in inactive version. We are planning to install the business content for info objects, info providers, query elements..
    We need your suggestions on  how to proceed further and what are the checks need to be done before installing the objects.
    Can any one provide an step by step document for installing the business content  objects from scratch.
    Regards,
    Saravanan.M

    Hi,
    Tty to install objects in below sequence.
    1. Application component
    2. Info area
    3. Catalogs
    4. Info objects - Chars and Key figs.
    5. DSO/CUBEs
    6. Transformations, info pack and DTPs.
    7. Bex Reports
    While isntalling obejcts from BI content, use grouping option as - only necessary objects , do the simulation and later install in background.
    If any obejcts already in active then use Match copy option there itself.
    From google you may find them,
    Use google search key as "Business Content in SAP BI".
    Thanks

  • How to Install Business Content Objects

    Hi,
    1. How to Install Business Content Objects.
    2. Is there any types in Transport Request.
    Thanks,
    Madhu

    Hi,
    1. In the main menu of BI Modeling choose Data Warehousing Workbench: BI Content (Transaction RSOR). If you are already in the Data Warehousing Workbench, select the BI Content functional area by clicking on the corresponding pushbutton in the left-hand navigation window, or by choosing Goto ® Install BI Content.
    You can display or hide the left navigation window of the Data Warehousing Workbench with Navigation Window On/ Off.
    2. Collect the objects you want to activate and check your settings for activating BI Content with respect to Install, Match or Copy and Active Version Available.
    More information: Collecting Objects
    3. With Install, define how you want to install the BI Content:
    Installation Type
    Information
    Simulate Installation
    The system runs a test to see whether any errors are likely to occur during the installation. However, not all errors that may occur can be identified during simulation: Some error messages can only be generated when a real A version (not just a simulation) is available in the system. You should, therefore, only use the simulation function as a rough guide to help you identify and remove basic errors.
    Install
    The selected objects are installed immediately.
    Install in Background
    The selected objects are installed in the background.
    Install and Transport
    The selected objects are installed immediately and then written to a transport request.
    If you have a large number of objects, SAP recommends you use the Install in Background option because installing a large number of objects can take a long time. Modifying objects that are already active can take an especially long time to complete.
    Make sure that when you install objects in the background, the versions are not matched. It is always the delivery version that is installed. They are not matched
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
    hope it helps.
    Regards
    CSM Reddy

  • I am not able to see the installed BI content object in the DWB

    Hi ,
    I am not able to see the installed BI content object in the DWB
    and the BI server is new one, this is the First BI content info object I am installing.
    for example I have selected 0Account BI content info object for installation
    I followed the below steps for installation.
    1 Drag and drop of 0Account info object in right side window.
    2.Grouping option selected as only necessary objects.
    3.collection mode selected as manual collection then executed using execuiton button.
    4.selected the install all below option.
    5.finally installed the object with install in background option.
    job got finished successfully.
    please let me know if I did any thing wrong and please post valuable suggestions.
    Regards.
    Srinivas

    HI
    If yor installing first time you have to select info area and object catalogs also else it will go and stored in unassigned nodes. whatever your doing the option for installing the business content everything is same, but in right hand side panesl select the info ares etc.
    regards,
    Chandra.

  • Error while activating the business content object

    Hi guru,
    We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
    So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
    but once done with the installation when i try to find the object and display it
    that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
    "_settings for material number conversion not found"_*
    so please help me out what is the problem
    Thanks

    Thanks Subash Balakrishnan for replying,
    but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
    Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
    then instead of showing me the object properties screen it gives me the error as mentioned above,
    so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
    now i hope my problem is quiet explanatory so please help me.
    Thanks

  • Not Able to Install Business Content Objects

    Dear all:
    We have installed BW 7.0 Dev environment in our server. Now we are trying to install BI content into BW. But when we moved to "Business Content",we only see several catalogs like technical content, BEx Personalization, BI Trace Tool, instead of standard Business Content for different business scenario. Is there anything else we should import into our new-installed BW 7.0?
    Thank you very much
    BR
    S.F

    Hi Sf,
    I'd go Support Packages and Patches> SAP NetWeaver> SAP NETWEAVER> SAP NETWEAVER 2004S> BI Content for SAP NetWeaver> BI CONT 7.03
    Let us know your progress.
    Cheers,
    Sarah

  • Installing BI Content Objects

    Hi,
    We need to install Cubes from the BI Content.If we choose
    the Grouping option 'In data flow before', then all the objects required for activating the Cube are collected. These objects include Update Rules, Infosource etc. Right?
    My questions are:
    1.what about the datasource? Do we need to activate the standard datasource from R/3 side first and replicate it in BW and then install the Infocube??Is the order important?
    2.What about the Source system? Where can we assign it?
    There is an option to choose the source system in the BI Content screen.Do we need to select the source system in that screen?
    Any inputs will be appreciated..
    Thanks,
    -Ravi

    hi!
    1) yes the order is important you got to replicate the data sources into BW and then install the business content cubes, other wise you have to manually assign transfer rules
    2) yes you have to maintain this file source system assignment in the business content installation tab.
    with regards
    ashwin

  • How to re-install Business Content objects if we got an error

    Hi Friends,
    I was installing the SD Info object catalogs and suddenly the server connection went off and I could see some errors on the screen.But I could see those objects under the Select objects in BI content panel.Does that mean that they are installed or I have to re-install it again?
    Please advice.
    Thanks in advance,
    -VM.

    you can definitely re-install - follow the same procedure ... now you will see another box called
    MATCH (X) or Copy - here you can choose to copy ( overwrite existing definition ) or Match - match and if there are differences then reinstall the object..

  • Issue installing business content

    Has anyone out there come across the following error message while trying to install business content:
    Object 2LIS_11_VAITM (InfoSource) could not be collected for object ()
    Message no. RSO296
    Diagnosis
    You have collected objects in the BW Metadata Repository. Associated objects for the object  of type  have also been collected. Object 2LIS_11_VAITM of type InfoSource was among these objects. This object
    2LIS_11_VAITM of type InfoSource, is not, however, available in the Metadata Repository.
    System response
    Object 2LIS_11_VAITM of type InfoSource is ignored in further collections. The links for object  of type  are incomplete. This may result in not being able to activate this object.
    Procedure
    If this error occurs while you are installing Business Content, a delivery error may have occurred. Inform SAP. In all other cases, check, for example, that the object has not been deleted by another user during the collection.
    I am assuming somethign went wrong during the installation of the box, but just wondering if anybody has any ideas on this.
    Thanks.
    Dan

    Have you activate and replicated the datasource 2LIS_11_VAITM before activating the business content?

  • Business content object  installation

    Hi Friends,
    What care i should  take while installing Business content object
    Regards
    siva

    Dear Srini,
    You have to follow the following steps while activating the business content.
    1. Identify the ods, cubes that required for ur scenario
    2. Identify the master data fields, transaction data sources .
    3. In the src system check in RSA6 whether those datasources available, if not activate them from RSA5.
    4. Replicate them to BW.
    5. Identify the Infoobject catalogs activate them by selecting grouping dataflow before, Edit->Src Sytem, Collection->automatic.
    6. Activate the ods objects  by selecting grouping dataflow before.
    7. Activate the cubes  by selecting grouping dataflow before.
    8. Activate queries  by selecting grouping only necessary objects.
    Assign points pls.......
    Best Regards,
    SG

  • How to install BI content on a new Netweaver 2004s SR1 installation

    HI Friends,
    I have installed new NetWeaver 2004s SR1 on Windows 2003 server :oracle 10g as a central system.The installation was succesfull.
    How to install the BI content addon  in the system?(not installing business content objects). Please let me know if you have any guidance  for installing the BI content.
    Thanks
    mv_d

    im also facing the same problem. you got it solved? please do help me [email protected]

  • BI Content Objects

    Hi Experts,
    I want to install BI Content objects, how to install what are all the steps followed. This version is SAP BI 7.0.
    Ex:- Sales Overview Infocube all  information including reports this cube, all objects I want to install, how to do, Please provide step-by-step.
    This is first time I am doing this job, please clearly explain, please prvovide step-by-step.
    Thanks in Advance...
    Bye,
    Bharathi.

    Hi Bharathi,
    Before all this steps make a note that Bsuiness content is released in 3.x version but not in BW 7.0 version.
    Install your datasources in ECC taht is sales flow like header, item schedule lines, Billing and deliveries and replicate them to your BI system.  To do this go to RSA5 and activate the datasources according to your requirement.
    Please follow below steps.
    1. Goto RSA1
    2. Select Business content push button at left side
    3. In grouping option select dataflow before
    4. Collection mode Automatically.
    Now select the bsuiness content, like cube or DSO which you want to install for sales cube.
    For deatils about the sales data flow business content see below link for the complete details.
    http://help.sap.com/saphelp_nw70/helpdata/en/17/cd5e407aa4c44ce10000000a1550b0/frameset.htm
    5. Install option select instal in background.
    Hope this helps.
    Regards,
    Reddy
    Edited by: Reddybl on Apr 10, 2010 12:58 PM

  • Installing Business Content

    Hi,
      I am trying to install Business Content Object.The object was installed without any errors.But i am not able to see the object in Modelling.
    When checking in the Meta data repository its showing the object as active.
    I checked to which info object catalog it belongs to.
    That catalog is not active in Modelling. I checked Unassigned nodes also, the object is not present there.
    Any help would be greatly appreciated!
    Thanks,
    Jyothi.

    Hi Manu,
      I checked in Unassigned nodes, its not there. And there is no relevant Info object catalog present in Modelling.
    Can you guide me what exactly to do.
    Thanks,
    Jyothi.

  • Installation of Business content objects

    HI all
    Can any one please tell me How to install Business content objects in to our Infoarea.
    Thanks
    S.S.

    Hi Surya,
    hopefully you connected you R/3-System to your BW, go to "Business Content" by transaction "RSA1" and select your BC in the shown trees. The selected BCs can be dragged-and-dropped from left to right. Switching "Simulate Installation" under the button "Install" is a good idea, more important is the option "Only necessary objects" under "Grouping" - in all other cases you would get a lot of InfoObjects, -providers and so on you never need and which would fill your system with superfluously garbage.
    After a successful installation you can use all the new Objects  
      That's all
        Ralf

Maybe you are looking for