Was is the approx cost of repairing/replacing the key board, "Glass of Red Wine"

Was is the approx cost of repairing/replacing the key board, "Glass of Red Wine"

How much was spilled? Just a teaspoon or much more?
A teaspoon and you might be fine with a new keyboard, might.
If much more, then forget it, the logicboard is fried (or will corrode and then fry) and it's not worth spending a dime more on it, except to ship it off for parts.
User damage not covered under AppleCare or warranty.
You can take the hard drive out and use a SATA to USB adapter and Migration Assistant to a new Mac, or install MacDrive on a Windows PC and grab your files that way.
OtherWorld computing has parts, tools and videos how to disassemble.
Good Luck

Similar Messages

  • My home button is not workingit seems to be indented into the iPod itself. would Apple fix that? if so, what is the approximated cost of repair?

    it seems to be indented into the iPod itself. would Apple fix that? if so, what is the approximated cost of repair?

    If under warranty and the iPOd is defective, Apple will replace the iPod ant no cost.  Otherwise they will excahnge the iPod for a refurbished one for a flat price depending upon the capacity, for a 4G it is $99, $149, or $199.
    If not under warranty:
    FIX for iPod Touch Home Button: Apple Support Communities

  • My Bose SIE2i volume control does not work. (pause/play does work). This is the secone set - the apple store in Sydney replaced the firsat set that had the same problem. It was working OK and has stopped.

    My Bose SIE2i volume control does not work. (pause/play does work). This is the second set - the apple store in Sydney replaced the first set that had the same problem. It was working OK and has stopped.

    Thanks again V.K. I did check the layout, and it was listed as alphabet when I inputted the password. So that doesn't seems to the the issue.
    Just finished a truly mystifying experiment, but I put in a shorter password in the way mentioned earlier and it worked. I then systematically kept increasing the characters of that password and it seems that if the password starts to exceed about 16, it stops recognizing it. I am fairly sure it is not the password itself since it never gives an error when typing in the verification password. So unless I systematically make the exact mistake twice at the setup screen, and then don't or make a different mistake every time at the login screen, I don't think its my typing skill.
    So problem solved for now, but I am still a bit worried. Maybe I should completely reinstall and use a shorter password.
    Is there supposed to be a length limit?

  • I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

    I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
    From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
    I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

    Install the new drive in the computer.
    Install the old drive in an external USB or Firewire enclosure.
    Boot the computer from the Recovery HD on the external drive.
    Use Disk Utility to partition and format the new internal drive.
    Clone your external drive to the internal drive.
    How to replace or upgrade a drive in a laptop
    Step One: Repair the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.
    Step Three: Boot from the Recovery HD on the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the Recovery HD then click on the downward pointing arrow button.
    Step Four: New Hard Drive Preparation
      1. Open Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your new hard drive (this is the entry with the
          mfgr.'s ID and size) from the left side list. Note the SMART status of
          the drive in DU's status area.  If it does not say "Verified" then the drive
          is failing or has failed and will need replacing.  Otherwise, click on the
          Partition tab in the DU main window.
      3. Under the Volume Scheme heading set the number of partitions from
          the drop down menu to one. Set the format type to Mac OS Extended
          (Journaled.) Click on the Options button, set the partition scheme to
          GUID  then click on the OK button. Click on the Partition button and
          wait until the process has completed.
      4. Select the volume you just created (this is the sub-entry under the
          drive entry) from the left side list. Click on the Erase tab in the DU main
          window.
      5. Set the format type to Mac OS Extended (Journaled.) Click on the
          Options button, check the button for Zero Data and click on OK to
          return to the Erase window.
      6. Click on the Erase button. The format process can take up to several
          hours depending upon the drive size.
    Step Five: Clone the old drive to the new drive
      1. Using Disk Utility still opened.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Check the box labeled Erase destination.
      5. Select the destination volume from the left side list and drag it to the
          Destination entry field.
      6. Select the source volume from the left side list and drag it to the
          Source entry field.
      7. Double-check you got it right, then click on the Restore button.
    Destination means the new internal drive. Source means the old external drive.
    Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.

  • Activate the FIELD Cost Center while issuing the Material to Order by 261

    Dear All,
    How to activate the FIELD Cost Center while issuing the material againest Order IN MB1A?
    Thanks and regards,
    Satyajit

    Hi all,
    I'm having problems with activating the cost center field too. I've already checked OMBW and OMJJ. For OMJJ, cost center field was required. For OMBW, Cost Center field was Supressed. However, when I checked the Change Logs, no changes were performed since last year. The user who raised this issue had the cost center field activated until December 1, 2008 but now it's deactiavted. So I don't think it's OMBW responsible for this since there was no change since last year.
    Please share your knowledge on this.
    Thanks!

  • My i-pod touch screen craked, I'm wondering if it makes more sense to get a new one or replace the screen? If i replace the screen where would I have to go?

    My i-pod touch screen craked, I'm wondering if it makes more sense to get a new one or replace the screen? If i replace the screen where would I have to go?

    Apple will exchange yours for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    Here is one third-party place.  Google for others.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • My daughter dropped her ipod touch 4g into water. We bought a new one 3 days ago which she has dropped. The screen has smashed! Can we use the good screen from the water damaged ipod to replace the broken one

    Can anyone help please? My daughter dropped her ipon touch 4g into water which resulted in it being ruined. We bought her a new one three days ago and she has just dropped it and cracked the screen!!!
    Cany anybody tell me, are we able to use the perfect screen from the water damaged ipod to replace the broken one on the new ipod or, would the water damage have ruined the screen too?
    Thanks in advance

    Your very best option would be to take it to an apple store and exchange it for an alike model which can be a refurbished, or new unit. The repair/exchange price is about 99USD.  http://support.apple.com/kb/index?page=servicefaq&viewlocale=en_US&geo=United_St ates&product=ipod&select=REPAIR_PRICING

  • My computer has been seen at Genius bar 6 times for freezing up, reloaded all original settings and even went to the apple shop where they replaced the battery and logic board. Still freezes after I try to reload iTunes stuff and app stuff from apple

    my computer has been seen at Genius bar 6 times for freezing up, reloaded all original settings, all of their diagnostics, and they even sent it to the apple shop where they replaced the battery and logic board. Still freezes after I try to reload iTunes stuff and app stuff from apple, especially iPhoto which is seems to refuse to load and then begins freezing up all over again. Anyone else have this problem. Other than this, I have had absolutely no problems with this computer. Now, it's a file of junk.

    Hi Ronald ...
    Have you checked lately to see how much free space there is on the disk? Especially since iPhoto freezes at launch ...
    Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage
    Make sure there's at least 15% free disk space.
    And make sure the OS X software is up to date.
    Click the Apple  top left in your screen.
    From the drop down menu click:   Software Update
    If you have anti virus software installed or are using third party Mac cleaning utiliites, that may be part and parcel of the your problems.

  • HT4718 I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive,crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?

    I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?

    A 2008 Mac won't have originally shipped with Lion. You need to install 10.6.8 on the computer, log into the Mac App Store with the Apple ID you used to purchase Mountain Lion, click on the Purchases tab, and download it.
    (121465)

  • My notebook cord recently short fused the office. I have replaced the cord and the computer seems to working fine, except the internet wont work. It states it is connected in the network preferences. can any one help?

    My notebook cord recently short fused the office. I have replaced the cord and the computer seems to working fine, except the internet wont work. It states it is connected in the network preferences. can any one help?

    Hi LanaJay84,
    If you are having issues connecting to the Internet from your Mac, you may find the following articles helpful:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
    http://support.apple.com/kb/ts1317
    Regards,
    - Brenden

  • HT1657 If I rent a movie & decide to buy it later... Will the rental cost be deducted from the movie purchase cost? (E.g. $19.99 - $2.99)

    If I rent a movie & decide to buy it later... Will the rental cost be deducted from the movie purchase cost? (E.g. $19.99 - $2.99)

    No, you will be charged the full price, there is no discount for having previously rented it.

  • Can I disable the InDesign Lock File or replace the beginning character (tilde) so it is compatible with SharePoint?

    Can I disable the InDesign Lock File or replace the beginning character (tilde) so it is compatible with SharePoint?

    Can I disable the InDesign Lock File or replace the beginning character (tilde) so it is compatible with SharePoint?

  • How much will it cost me to replace the whole top screen of my macbook, including the part that pivots to open and close it?

    I'm not sure of what it's exactly called, but my whole screen (including the black part that attaches the screen to the keyboard) is in bad condition. My screen is cracked, and when I open my macbook, the hinge is loose and flops and does not stay in place. Does anybody know how much it would cost for a replacement? Would I be better off buying a new laptop?
    Thanks

    This is an international community.  Prices vary from country, state, city, etc. 
    You should call the repair shop of your choice and ask for an estimate.  Make sure the estimate includes taxes, labor costs, etc.
    Remember, no one can give you an exact figure until the repair techs physically examine & run diagnostics on your computer to confirm what is wrong w/it.

  • I heard that if you break the glass on you're iphone and you bring it to the apple store, you will replace the glass for free? Is that right?

    Is this true?

    A) Absolutely not true. There will be a replacement cost for an iPhone that is either out of warranty or that does not have Apple Care +. (AppleCare is different, note the + sign).
    If you have Apple Care + on your phone (you will know because it will have had to have been after October 14, purchase date) then you will be eligible for a new phone swap AFTER seeing a Mobile Technician.
    If you have AppleCare +, which now covers accidents, you must make an appointment and you must be seen by an Apple Mobile Ttechnician in order for them to authorize the swap. You cannot walk into a store and have anyone done it - it must be done by a tech.
    Information about AppleCare+ AT TIME OF PURCHASE
    - $99 for two years of coverage
    - Within those two years you are allowed two incidents of accidental damage. They are $49 at the Genius Bar.
    - If a manufacturers defect (something wrong with the device and no damage has occured) is found, the phone is then repaired at no cost, and no incident of $49 will occur.

  • Has Anyone sent the iphone in for repair for the low volume issue ???

    I called apple last week and spoke with a level on support agent. After he could not solve the volume issue they sent me to level two. the level two tech took the call and told me right away that they were going to send me a new phone. I give him my credit card as a deposit so they would send a new phone and when I had the new phone I could then send the old one back. Well after a few days I called to check on the phone and found out he never placed the order and now they say they want to send it for repair some place in Texas. They did offer the rent me a phone for 29.00 while I wait for repair. I told them no rental for me. How bad is that, a hardware issue and they say they are going to send a new phone and never do then they offer a repair and to rent me a phone. I was wondering if anyone had sent in the phone for this issue yet. I do not think I am going to send it in and I think I am going to get my refund while I still can. I just thought I would check to see if anyone had sent the phone in for repair yet and how it worked out.
    Andrew

    How are any of us (Apple users just like you) supposed to have any idea?
    We weren't there.  We don't know the specifics of what happened to your iPhone.
    Ask the store that repaired it.

Maybe you are looking for

  • Filter problem in f-04

    hi, in f-04 g/l transfer with clearing, i want to process open items based on the profit center and plant, i have given the proper inputs for them but system is not filtering the open items based on the selections i have given, even though there some

  • Deletion of Business partner in Solution Manager

    Hi      We have created the Business partner in solution Manager not able to delete the Business partner.In transaction BUPA_DEL, when we select Test run Check only, system gives the message like Business partner can be deleted,but when we select oth

  • How to call same vi for 4 times in a single vi?

    Hi.. I ve one vi named 1D array Mult. I need to call this vi four times in another vi program. The problem i ve experienced is all the four vi outputs are same.  My question is: How to call the same vi for many number of times? Thanks in advance Solv

  • UpdateRules are in inactive state

    Hi Experts,       I have created a cube A with copy of cube B.       Cube B contains 3 Update Rules.       I have created same update rules to A, which contains cube B. and then transported these UpdateRules from development to Quality. But found the

  • "shipping no" in confirmation tab

    dear all, kindly tell me what is the use of this key in po. there is a key "shipping not" in confirmation tab. will this be helpful for making "addvance shipping notification" through "vl31n regards, amey