Water damage screen does not work

I dropped my phone in water yesterday and took it out.....it blinked for a few min and then turned black. I immediately placed it in rice and it stayed there for 16 hours. I can hear my phone, listen to songs but i cannot see the screen.
Any thoughts ?

How soon after the water incident did you turn it on? Or was it already on and you left it on? It's likely not repairable.
Water + electronics =

Similar Messages

  • HT1414 touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod

    touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod, can anyone help or what is the cause

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • HT1212 I am trying to restore a phone that the screen does not work on, therefore I can't input my password.  How can I bypass this and upload it to itunes?

    I am trying to restore a phone that the screen does not work on, therefore I can't input my password.  How can I bypass this and upload it to itunes?

    You could follow the instructions in the support document that you linked from. There is a section regarding the passcode and the inability to use it or enter it. However, you may encounter more issues since you cannot use the screen.

  • I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides screen is ok. Is there a way around it? :(

    I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides the screen is completely fine-the screen will not recognize my finger anymore. I am not trying to fix the phone, but I need to have my contacts. The pictures have already synced, but I need my password to do a full backup. Unfortunately, I can't type in my password. Is there any way around it? If I take my phone to the apple store, will they be able to help me? I am not willing to replace the screen just to do this, however, so that is out of the question. 

    Someone else may have a workaround, but, as far as I know, if you cannot interact with the screen on the iPhone, there is no way to unlock it so you can get to your contacts.
    Were you saving them to iCloud by chance? If so, you can restore them to your new phone.
    ~Lyssa

  • Maverick update now my login screen does not work please help.

    Hello hope you can help.  I have a 24 inch Mid 2007 Intel iMac.  It has been great until now.  I recently did the Maverick update and now my login screen does not work.  When I wake the computer up the screen appars with my picture icon.  When I click on it nothing happens.  If I click on it a second or third time the beach ball appears and nothing happens.  I have to shut the unit down with the power button and when the unit powers back up everything works normally.  Are there any suggestions out there?  I have updated the software without resolution. Is this computer too old?   Do I have to buy a new one?
    Thank you

    Your iMac can support Mavericks according to the requirements > OS X Mavericks: System Requirements
    Try a Safe Mode boot. That deletes some system caches that may help.
    Startup your Mac in Safe Mode
    A Safe Mode boot takes much longer than a normal boot so be patient.
    Once you are in Safe Mode, click Restart from the Apple () menu.
    See if there's an improvement for the login screen.

  • My iphone four screen does not work and in order to restore it i have to turn of the "find my iphone" app. help!!!

    my iphone4 screen does not work and in order to restore it i have to turn of the "find my iphone" app. help!!!

    It is not the app, it is Find My iPhone enabled with your iCloud account settings on the iPhone.
    http://support.apple.com/kb/ph2702

  • Sprinboard screen does not work on android device

    Hi experts,
    I have a mobile application that i coded on JDEV 11.1.2.4. And i deploy via sdk android-4.3 version. I set DefaultSpringboard on adfmf-application.xml file.
    When i deploy on AndroVM or another Android VM either SDK Emulator, i can see springboard screen properly. But deploy on real devices (tried with Android 4.1.1 Tablet, Android 4.1.2 Sony experia phone, Android 2.3.5 HTC phone) could not see anything, just seen black screen with header(written as applicationName) AdfmfContainerUtilities.showNavigationBar(); does not work also.
    How can i resolve this?
    Also i tried to create completely new adf mobile application that contains only 2 feature and applied the scenerio, it fails on real device too. I think that the problem is on loading featureList. Because when i created an amx page and set as CustomSpringboard. It works
    Please help me..
    brgds
    I m adding my adfmf-application.xml file content, essentially i tried almost all different setting in it.
    <?xml version="1.0" encoding="UTF-8" ?>
    <adfmf:application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:adfmf="http://xmlns.oracle.com/adf/mf" name="MLMobilKatalog"
                       id="com.accmee.MLMobileCatalogue"
                       appControllerFolder="ApplicationController" listener-class="com.accmee.application.LifeCycleListenerImpl">
      <adfmf:featureReference id="com.accmee.Login" showOnSpringboard="false" showOnNavigationBar="false"/>
      <adfmf:featureReference id="com.accmee.productList"/>
      <adfmf:featureReference id="com.accmee.productDefinition"/>
      <adfmf:featureReference id="com.accmee.favourites"/>
      <adfmf:featureReference id="com.accmee.messages"/>
      <adfmf:featureReference id="com.accmee.categoryDef"/>
      <adfmf:featureReference id="com.accmee.exit"/>
      <adfmf:featureReference id="com.accmee.menu" showOnNavigationBar="false" showOnSpringboard="false"/>
      <adfmf:featureReference id="com.accmee.menuList" showOnNavigationBar="false" showOnSpringboard="false"/>
      <adfmf:preferences>
        <adfmf:preferenceGroup id="application">
        </adfmf:preferenceGroup>
      </adfmf:preferences>
      <adfmf:navigation>
        <adfmf:navigationBar enabled="false" displayHideShowNavigationBarControl="false"/>
        <adfmf:springboard enabled="true" showSpringboardAtStartup="false" displayGotoSpringboardControl="false" animation="none"/>
      </adfmf:navigation>
    </adfmf:application>

    Per the release notes, Wallaby only supports Chrome and Safari at this time.
    And yes, it only works with Adobe Flash Professional CS5 files. To use older Adobe Flash Professional files you can resave them in CS5 and then run them through Wallaby. This is a technology preview (not a product) and therefore has certain limitations that might not exist in a shipping product.
    You mention this doesn't work on an itouch G3. You mean an iPod touch G3, yes? What version of iOS do you have installed on your iPod touch? This may be related to incorrect serving of SVG content (if you are using apache) and so you may need to update your .htaccess file in apache per the Wallaby technical tips page.
    Michael O'Rourke
    Adobe Wallaby Team

  • Added field to dynamic selection screen does not work in FBL5N

    hi,
    we have added KNA1-KATR5 to the selection screen of FBL5N by using logical database DDF using "view CUS" but it does not work.
    Our system is 6.0
    is there any OSS note or program that we should add?
    many thx.

    Refer This:
    Additional field selections in FB03

  • Step that calls a dialog box (modal screen) does not work

    Hi,
    I have a workflow step that has a method which calls a function module that calls a screen (text editor screen).
    When I execute the workflow in test mode (SWUS), the screen shows up.
    But when I execute the work item from the Business Workplace, the screen does not show up.
    Your help is greatly appreciated.
    Thank you.
    Giscard

    Hi,
    Check the Agent assignment for that Task. And Make that Task as a General Task.
    Regards,
    Surjith

  • Icon and screen does not work

    these is no itunes icon on the main screen and when i connect the nano with the computer will appear a white circle around the icon and the screen does not work

    Did you already try to reset the iPod? How to reset iPod

  • I cannot get my ipod to unlock, the touch screen does not work and I cant reset it

    I cannot get my ipod to unlock, the touch screen will not work and everytime i try to reset it I take a picture.  any suggestions

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HP Pavillion 23tm touch screen does not work with Windows 8

    I shipped my ASUS computer for repair and when I got it back the touch screen no longer works.

    wilandmari wrote:
    I shipped my ASUS computer for repair and when I got it back the touch screen no longer works.
    Hi,
    ASUS does not make "Pavillion 23tm ", only HP. Anyway, hope no damage after a repair. Please try:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=au&lc=en&docname=c03488148
    Otherwise, ask the repairer to fix it for you.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Omni 10 touch screen does not work / Tablet Omni 10 non funziona il touch screen

    After updates to Windows, the tablet does not recognize the touch screen.
    I tried all the recommendations of the forum but to no avail !! it is impossible that HP does not have a solution to the problem? I see that others have similar problems, so it is a manufacturing defect? Amazon also because I would replace the product with another Omni 10 but if this has the same problem, I take the money and make change. thanks
    Dopo gli aggiornamenti a Windows, il tablet non riconosce il touch screen.
    Ho provato tutti i consigli dei forum ma senza esito!! è impossibile che HP non abbia una soluzione al problema? Ho visto che altri hanno problemi simili, quindi è un difetto di fabbricazione? Anche perchè Amazon mi sostituirebbe il prodotto con un altro Omni 10 ma se anche questo ha lo stesso problema, prendo i soldi e cambio marca. Grazie

    Hey @MaxAlex72 ,
    Welcome to the HP Forums!
    I understand you're experiencing issues with the touch screen on your Omni 10 tablet.
    I would suggest following these guides:
    Windows 8 System Restore Guide
    Troubleshooting Touch Screen Issues in Windows 8
    If neither of those options help it would be best to contact HP Phone Support for service options. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
    Thanks!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Touch screen does not work

    I just got an HP elitebook 2760p.   Everything works...except that I cannot seem to get the touchscreen to work.   Whether the screen is up (like a regular laptop), or flipped down (like a tablet), it does not respond to fingers or to the pen that comes with the computer.  I have tried using the touch screen while using internet explorer, while using the "desktop" of windows 7, and also while booting up the computer with it flipped like a tablet.
    There is probably a very simple answer...and once I get it, I'll feel like a beef mind, but for the life of me I can't figure it out.   I can't seem to find any swich to turn on, whether physical or in the windows setting pages.  The computer did not come with a manual, but I looked up on the online manual and there is no information on "how to use the touch screen" 
    Is there something that I must "turn on" in Windows 7, or a switch somewhere on the side of the computer which I need to flip to use the touch screen?   Could I be missing a driver?

    Your EliteBook is a Business model.  Your issue would be best answered on the HP Enterprise Business Community Forum
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Target Display Mode: Lenovo T420 DisplayPort to iMac (2nd screen) does not work

    Configuration:
    - Laptop Lenovo T420, DisplayPort, Windows 8.1
    - DisplayPort cable, Adapter to Mini DisplayPort
    - iMac (Intel, 27-inch, Mid 2011) as 2nd screen, connected via Mini DisplayPort Adapter, Mavericks OSX 10.9.1
    Problem:
    - iMac does not start Target Display Mode
    - Even cannot be forced via Cmd + F2 or Cmd - Shift - F2
    Test:
    - Lenovo via DisplayPort cable to 2nd screen works fine
    - Can switch between PC only, Duplicate, Extend display
    Question:
    - What is wrong?
    - What can be done to idenify the root cause?
    Kind regards, Marcel.

    Hello Marcel,
    It sounds like you are wanting to use the iMac in Target Display mode with your PC. Target Display mode is a feature that is supported from one Mac to another Mac according to this article:
    OS X Mavericks: Use another Mac as a display
    http://support.apple.com/kb/PH14264
    Target Display Mode lets you use a Mac as the external display for another, “primary” Mac.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

Maybe you are looking for