Way to remove shared audio?

i don't consider myself new to logic, but there's definitely a lot that i don't know how to do. does anyone know of an effect/editing process that can be used on a track or channel, so that it removes or silences any audio shared with another track/channel?
my situation: i was jamming with a friend the other week, and we recorded a pretty cool track with him on guitar and me on bass, but i just want the audio of his guitar, and we recorded on one track and channel (from an overhead mic). he's gone now, but i can play the exact same part on bass that i play in the recording. is there a way to tell track 1 to silence what its audio shares in common with track 2 at any given time, so that just the guitar part is left?
i haven't heard of it done, but maybe it's out there. thanks

No.
Christian

Similar Messages

Is there a way to remove only parts of audio in a clip (remove music but keep voiceover)

I've been given a promotional video to edit, with a voiceover and background music. The file I have is an MP4 file, and I do not have the separate pieces of the file (Video, audio, and music).
Is there a way to remove the music but keep the voiceover? I doubt there is..
Thanks

If the voiceover is in a narrow range of frequencies you might get lucky. You can use the Graphic Equalizer to reduce the volume of all frequencies except those that the voice is using. There may still be some music in these frequencies as well, but it is worth a try.
Select your clip and open the inspector to the Audio Tab. Under Audio Enhancements, you will see the word "Equalization". Over to the right you will see a small icon of a graphic equalizer. Click this and it will open the Graphic Equalizer.
That will bring up the Graphic Equalizer window. You can set the Graphic Equalizer to display 10 bands of frequencies or 31 bands. Choosing 31 bands will give you more control.
There are probably many other things you could try, since you have access to all the Logic Pro X synthesizers in FCPX, but that is the most straightforward.

My (shared) iMessages are taking up almost all my iPhone storage. Is there a way to remove them to clear up some space on my phone?

My (shared) iMessages are taking up almost all my iPhone storage. Is there a way to remove them to free up space on my phone?

Thx - the videos are on my Ipad - that is the problem - they are taking up all the storage and there is no room for anything else. Is there any place I can store them so that I can access them from time to time, but not have they use up all the space on the IPad? Sounds like the cloud is out...

Is there an easy way to remove audio track from .mp4

Guys
Wondered if anybody knows of a way to take a .mp4 file with a silent audio track exported and remove that audio track altogether without having to reconvert the video in AME- just deleting the (silent) audio track
Have lots of files that need this and was looking for a way to do this without going back and reexporting all the clips the hard way
Any thoughts much appreciated-- (I have access to both Windows 7 and WIndows XP pro 64 bit)
Thanks
Tony

Thanks Jim
I figured that would work but for some reason the resulting files did not play correctly--Alternatively I used Mpegstreamclip -opened the video I wanted to erase audio track from--- clicked on "edit--delete audio track" then clicked "save as" and this finally accomplished what I was trying to do--Now have a copy of the .mp4 file wo audio
Thanks for all your help--Hope this thread helps someone in the future
Peace
Tony

Remove "Shared with Everyone" folder from OneDrive/Sharepoint Online

Due to security concerns, we want to get rid of the "Shared with Everyone" folder our entire user-base (which is around 1800). Is there an automated way of removing it from SharePoint Online permissions or a PowerShell script?

Hi
Unfortunately, there isn't a way to remove the "Shared With Everyone" folder for all users. As
an admin, you can just log into every user's OneDrive for business library to delete it one by one. Sorry for this. If the amounts of the users are large, it will take heavy workloads to work on this. In this situation, we suggest you let the users delete
the folder by themselves.
Amit Kotha

How to remove unwanted audio using audio effects?

The audio effects in question: http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d80a .html
I've been meaning to learn how to do this for a while so I thought I'd get started.
I want to learn how to clean up my audio. I don't have very professional audio gear, I'm using a Rode videomic pro on a canon 60D so the quality isn't the best but it's ok for now. There is a lot I want to learn but right now there are 2 things on my mind:
1. I have a deadcat wind muff on my rode but still when the wind hits it I get this unwanted wind sound on my soundtrack. I know there has to be a way to remove or reduce this somehow using the audio effects.
2. Slight white noise over my audio. I know this is a result of recording directly from my camera but there has to be a way to reduce the white noise in order to get clearer audio. I've seen people recording right out of their camera and they have way better results than me.

I know there has to be a way to remove [wind noise]
There is. It's called ADR.
there has to be a way to reduce the white noise
There is. Better equipment.
Sorry but, I think you may be expecting to much of your post production tools.

Best way to update AC97 audio drivers?

Is the best way to update AC97 audio drivers = dl. from msi the latest drivers which are 5.10.00.5970 (A3.80) I currently have 5890. Then uninstalling old ones from add-remove programs then install newest ones. Since live update doesn't seem to get it done. Thanks
Den

I agree with the package that is in Dr Stu's link, I downloaded that complete package which includes NVMixer for speaker setup and fine tuning your sound system.
Regards; Pop's

Hidding the floating toolbar that apears when sharing audio and/or video

Hello everyone!
I'd like to know if is it possible to remove(or hide) the floating toolbar that appears when sharing audio and/or video on firefox.
I am attaching an image of what I want to hide.
Thanks in advance,
Ibrahim

Sorry...
The attachment didn't work the first time...

What is the best way to remove applications?

I would like to remove unused applications (iChat, Dashboard, iCalendar and so on...)
I am running audio software and using CPU quite heavily.
What wold be the best way to remove these types of applications completely and have as minimal running in the background possible??? (I have already turned off Bluetooth, Airport etc...)
Should I install removal software or just send them all to the Trash bin?

None of those applications are running unless you launch them. Dashboard widgets only use CPU time and RAM if they are running. If you quit all widgets in the Dashboard then there's no memory footprint or use of the CPU.
If you don't want anything but essentials running then don't launch any applications and remove any Login Items from Accounts preferences.
Just because an application is installed on the computer does not mean it is running unless you launch it or configure it to launch automatically. So there is no need to remove any of these applications or utilities.
You will find some good books on Macs and computers in general at your local bookstore. Your question suggests that you could benefit by reading a few.
As for how to uninstall applications that you have installed see the following:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are also several shareware utilities that can uninstall applications:
AppZapper
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.

How to remove/minimze audio "pop" or "click"

Using FCP 4.5
I have an audio pop/click within a clip and have been unable to figure a way to remove it or at least minimize it. I can see it in the viewer when the wave form is displayed Any suggestions will be appreciated.
Ron

Randy,
Thank you for the suggested approaches...since it is a split second pop...and dialogue is not an issue, I think I will go with cutting and pasting. I have Soundsoap...but haven't used it much...but I may experiment once I finish this project.
I was hoping there was some kind of (simple) audio filter in FCP that would limit the pop...but apparently there isn't, at least not one that I could find.
Anyway, thanks again for your help...I'm off to cut, copy and paste.
ron

Fully uninstall/remove beats audio from hp pavilion x360 laptop

Hi everyone. How can I revmove the beats audio (btw. HP, I do like your products and buy them more then any other computer products, but seriously, how can you install so much trashware on a light laptop... oh well). I have seen a few guides but they all mention the IDT under device options or something similar. THERE IS NO IDT UNDER DECIVES (Under sound, video and game controlles). There is only .cyber link webcam cirtual driver, .intel(R) display audio .Realtek high definition audio There is still a Beats audio in my sys tray, in the controll pannel and it still craps up (sry for the language) my audio. I have advanced uninstaller 11 installed but it can find neither beats audio nor anything with IDT. How can I remove this from my laptop? The laptop is an HP pavilion x360 11-n013na. Cheers. EDIT: P.S I would like to remove it completely. I.E. do a clean uninstall, but if I can only disable it, that would still be better then nothing.

, Hello and thanks for posting on the HP support forums. The only way to remove the Beats audio from your system is to not use that system. Beats is built in as an integration to the IDP audio system and can not be removed. Thanks for the post and have a great day.

Is there any way to remove the see-through grayscreen and the 8-dotted circle whenever mozilla loads a html5(.webm) video?

When i watch an embed .webm in the innate html5 player, every time i try to forward or rewind the movie it puts up the grayscreen+loading icon(even tho the movie was fully preloaded).
Its especially annoying when you need to watch the movie frame by frame and loading grayscreen darkens it so that you can see alot of less details :/
Is there any way of removing that gray whatever?

Your original question was:
When i watch an embed .webm in the innate html5 player, every time i try to forward or rewind the movie it puts up the grayscreen+loading icon(even tho the movie was fully preloaded).
Could you post a link to a web page where you see this problem?
I couldn't find a test page for an embedded HTML5 webm video but I found this link to a webm file:
*http://clips.vorwaerts-gmbh.de/big_buck_bunny.webm
The above webm file link is from this test page:
*http://camendesign.com/code/video_for_everybody/test.html
(The embedded video on that page is actually a mp4 file). That test page is linked from the Mozilla Support article, [[Viewing HTML5 audio and video in Firefox]].
I have no problem using the slider to forward or back up video playback in either the embedded HTML5 mp4 video or the webm video linked above.

Quick way to remove advanced actions

Hi,
I have created a module that has over 100 advanced actions throughout. I use the same template with some modifications for the next module I'm creating.
What I have been doing is a save as and rename the module. Then I delete all but a few of the slides that I will use as guides for the next module I'll be creating.
The problem is that I still have all 100 of the advanced actions. I am wondering if there is a quick and easy way to remove them from my new template.
Your help would be appreciated.
Tricia

Something very important is missing in your question: which version do you use? If you don't know me, I have been blogging since 4 years about advanced actions (and now about shared actions), but never had a template with over 100 advanced actions, you should have seen my face when I read this .
Long time ago, a template was the only way to reuse advanced actions, this was/is a very popular article: Template for reusing script? - Captivate blog
And managing all those actions, especially if they were not very well documented (which is a pain in Captivate) or not well...sorry... designed, is very hard.
In CP8.0.1 it is not only possible to have shared actions, but if you copy/paste a slide or an interactive object that has an attached advanced action the action will be included in the copy. My present work flow is to have much used shared actions in a separate file (not a template, a cptl-file). Contrary to advanced actions, shared actions appear in the Library and can be managed there: deleting them is a breeze, you have a Usage button like for other objects. I open that special file as an External Library in any other project. When you drag the shared action that you need to your new project, it will appear in the Library, and if variables are used in that action those variables will be created automatically.
All this is not possible with advanced actions, no easy way to delete or manage them.

I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?

I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?
Let me explain a little more. I had downloaded a lot of free books in the past as a trial when iBooks was first released and since then I have decided I no longer want them, because of this I hid them from the purchased section of the iBooks store. The 5 books left are ones I decided to keep as seen in the following picture.
This is how it appears in iBooks on my mac. There are 4 books downloaded and 1 book that I have decided not to download at this time. I would still like to keep this book available in the cloud incase I want to download it again in the future. You’ll notice that hide iCloud books is not selected, if I wanted to hide the book that I have chosen to keep in the cloud, but have not downloaded yet I could.
This is exactly how I think this feature should work. If you have hidden a book from your purchases it should not show up in the mac Ibooks app. (I am aware you can never actually delete a purchase, just hide them and that hidden purchases can be restored to your account from within the account management section of the iBooks store).
The iOS app is working differently for me. Here is a picture of the purchased tab on the iBooks store in iOS Ibooks. Again notice that pictures of Lilly is still yet to be downloaded. This is how I expected it to look.
If we visit the front page of iOS iBooks the view is very different from what I expected. Here we can see the 4 books I wanted to keep on my device and have downloaded. We can also see the 1 book I wanted to keep, but did not want to store locally on the device and left in iCloud (Pictures of Lilly). However we can also see all the books I had hidden from the purchased section of my iTunes account and which I believe should no-longer be visible, Dracula, frankenstein etc…
I am aware of the hide iCloud books button within the iOS app, but I did not need to use this to hide the books I had removed from the my purchased section of the iBooks store on the mac, why are they still appearing in iOS?
I’m still not sure if this is a software glitch or not. This article suggests to me that books can be hidden, but I had already completed these steps.
https://support.apple.com/en-us/HT201322
A browse of google also suggests people may have been able to hide past purchases from the front page of iBooks on iOS in the past.
In case there was an issue with syncing I tried logging in and out of my iTunes account via settings in iOS. Force closing the app, disabling automatic downloads and removing my device from iTunes in the cloud. Syncing with iTunes on the mac did not correct the issue either.
Interestingly I have the same issue on my iPhone 6 running iOS 8.3 as I do on my iPad mini suggesting that this might be an issue either with my account or with iOS iBooks software in general.
If there is a way to remove the already hidden iBooks in your account from the front page of iBooks on iOS without using the hide iCloud downloads button? Please help community!

My apologies for the lack of photos, here is my post again with photos.
I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?
Let me explain a little more. I had downloaded a lot of free books in the past as a trial when iBooks was first released and since then I have decided I no longer want them, because of this I hid them from the purchased section of the iBooks store. The 5 books left are ones I decided to keep as seen in the following picture.
This is how it appears in iBooks on my mac. There are 4 books downloaded and 1 book that I have decided not to download at this time. I would still like to keep this book available in the cloud incase I want to download it again in the future. You’ll notice that hide iCloud books is not selected, if I wanted to hide the book that I have chosen to keep in the cloud, but have not downloaded yet I could.
This is exactly how I think this feature should work. If you have hidden a book from your purchases it should not show up in the mac Ibooks app. (I am aware you can never actually delete a purchase, just hide them and that hidden purchases can be restored to your account from within the account management section of the iBooks store).
The iOS app is working differently for me. Here is a picture of the purchased tab on the iBooks store in iOS Ibooks. Again notice that pictures of Lilly is still yet to be downloaded. This is how I expected it to look.
If we visit the front page of iOS iBooks the view is very different from what I expected. Here we can see the 4 books I wanted to keep on my device and have downloaded. We can also see the 1 book I wanted to keep, but did not want to store locally on the device and left in iCloud (Pictures of Lilly). However we can also see all the books I had hidden from the purchased section of my iTunes account and which I believe should no-longer be visible, Dracula, frankenstein etc…
I am aware of the hide iCloud books button within the iOS app, but I did not need to use this to hide the books I had removed from the my purchased section of the iBooks store on the mac, why are they still appearing in iOS?
I’m still not sure if this is a software glitch or not. This article suggests to me that books can be hidden, but I had already completed these steps.
https://support.apple.com/en-us/HT201322
A browse of google also suggests people may have been able to hide past purchases from the front page of iBooks on iOS in the past.
In case there was an issue with syncing I tried logging in and out of my iTunes account via settings in iOS. Force closing the app, disabling automatic downloads and removing my device from iTunes in the cloud. Syncing with iTunes on the mac did not correct the issue either.
Interestingly I have the same issue on my iPhone 6 running iOS 8.3 as I do on my iPad mini suggesting that this might be an issue either with my account or with iOS iBooks software in general.
If there is a way to remove the already hidden iBooks in your account from the front page of iBooks on iOS without using the hide iCloud downloads button? Please help community!
iPhone 6, iOS 8.3, Also an issue on my iPad mini iOS 8

Best way to remove last line-feed in text file

What is the best way to remove last line-feed in text file? (so that the last line of text is the last line, not a line-feed). The best I can come up with is: echo -n "$(cat file.txt)" > newfile.txt
(as echo -n will remove all trailing newline characters)

What is the best way to remove last line-feed in text file? (so that the last line of text is the last line, not a line-feed). The best I can come up with is: echo -n "$(cat file.txt)" > newfile.txt
(as echo -n will remove all trailing newline characters)
According to my experiments, you have removed all line terminators from the file, and replaced those between lines with a space.
That is to say, you have turned a multi-line file into one long line with no line terminator.
If that is what you want, and your files are not very big, then your echo statement might be all you need.
If you need to deal with larger files, you could try using the 'tr' command, and something like
tr '
' ' ' <file.txt >newfile.txt
The only problem with this is, it will most likely give you a trailing space, as the last newline is going to be converted to a space. If that is not acceptable, then something else will have to be arranged.
However, if you really want to maintain a multi-line file, but remove just the very last line terminator, that gets a bit more complicated. This might work for you:
perl -ne '
chomp;
print "
" if $n++ != 0;
print;
' file.txt >newfile.txt
You can use cat -e to see which lines have newlines, and you should see that the last line does not have a newline, but all the others still do.
I guess if you really did mean to remove all newline characters and replace them with a space, except for the last line, then a modification of the above perl script would do that:
perl -ne '
chomp;
print " " if $n++ != 0;
print;
' file.txt >newfile.txt
Am I even close to understanding what you are asking for?

Way to remove shared audio?

Similar Messages

Maybe you are looking for