WBS Correction are Not Being Allowed

Hi Experts,
We have an issue with WBS :
Employee has charged X hours against a receiver WBS element that has been closed.
This info errors during the transfer to CO with the error msg reflected on the following screen print.
We have attempted to fix this info via the data entry profile DIRADMIN using CAT2u2026.
To
A.        Delete the entry (on the effective date - in this case 7/10/2010-) and re-enter the hours using an open (alternate) WBS.
B.       Correct the record by entering a hours value of ZERO for the closed WBS; and a subsequent hours entry of XX (where XX represents the original number or hours to be charged to the WBS which is now closed.
In EACH case, we have received the following error msg; when we re-created this scenario using employee xxx in QEC with FY 2008 rec (open/closed)WBS data.
The QUESTION:   HOW DO WE GET PAST THIS HARD ERROR and send corrected WBS data to CO when the corrected entries are approved and subsequently transferred (VIA cat7) to CO??
Awaiting your replies.
Thanks & Regards
Aditya
Edited by: Virendra Pal on Aug 16, 2010 11:24 AM
No caps please

Hi,
As Nitin has suggested you need to reset the user status to allow you to do the necessary changes. Before that just check the user status. What exactly doest BRDN mean? Does it forbid any business transactions?
Once you come to know as to why this user status has been set and where all it impacts you can then work on reversing/resetting it provided there is no interlock between other parameters.
Regards,
Gokul

Similar Messages

Per-service SID's are not being granted correct permissions

Hi,
I had posted this here :
https://connect.microsoft.com/SQLServer/feedback/details/770984/per-service-sid-s-are-not-being-granted-correct-permissions, but no response as yet.
When installing SQL 2012 (on a VMWare VM), based on the following article :
http://msdn.microsoft.com/en-us/library/ms143504(v=sql.110), I have noticed that the SQL per service SIDs are not being granted the correct permissions. From the initial install, the following is what was observed (the red x's being permissions that
should have been granted but were not).
When re-installing and changing from specifying a domain account, to the default values, during set-up, the 4 service SIDs that were not added to 'Log on as a Service' initially were then correctly granted permission, but the other 4 in 'Bypass traverse
checking', 'Adjust Memory Quotas for a process' and 'Impersonate a Client after authentication' were still not added.
When running a repair on this install, 'NT Service\MSSQLFDLauncher' was then granted the correct permissions, but 'NT SERVICE\MsDtsServer110' was still missing 'Bypass traverse checking' and 'Impersonate a Client after authentication'.
This also resulted in the installation of Reporting Services - Native failing in the original installation with 'Attempted to perform an unauthorized operation'.
If anyone has recently installed SQL 2012, can you check (via gpedit.msc) that the correct 'User Right Assignment' was granted to the per Service SIDs as per
http://msdn.microsoft.com/en-us/library/ms143504(v=sql.110) ?

Have you resolved this yet? Group policy for the OU with my desktop removes all SQL per-service rights. If group policy is your issue, I'd be interested in how some are retained.
Randy in Marin

The corrections made on my DNGs in LR4 are not being acquired by BridgePS4 or Elements 10

Set-up-
LR4, LR3, Bridge and PS4 and Elements 10 on a MacBook Pro (OS 10.6.8), calibrated 24” HP ips monitor
Problem-
The corrections made on my DNGs in LR4 are not being acquired by BridgePS4 or Elements 10
The neither the images in the filmstrip nor the DNG file when opened in PS4 or Elements Camera Raw reflect the LR4 corrections.
Puzzling, since the Cropping and Corrections Applied Indicators are shown with the Bridge filmstrip images.
And, when I re-Save Bridge does acknowledge that it is doing new thumbnail extractions .
I’ve done all I’m aware to do.
Save in LR4 in Library Mode with filters off
Did an Update DNG previews and metedata
Automatically write changes to XMP is ON
Restarted the machine
To troubleshoot, I brought a few of those images( again DNGs) into LR3, did corrections and saved.
These images were rendered properly in Bridge’s filmstrip and corrections were carried into Camera Raw without issue.
Any insights?
Thank you in advance,
Marvin

LR4 defaults to using the new toning model and only ACR 6.7+ can understand the settings. You can probably update your ACR to 6.7 for PSE10, but there is no update for the older PS-CS4 if that’s what you’re using. The PSE10-specific update for ACR 6.7 on a Mac is here: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5382
and Windows update is here: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5383
The issue is that Process Version 2012 is what LR4 defaults to and this is not understood by the older ACRs.
Using PV2010 in LR4 would also probably work but the new toning model is one of the main reasons to use LR4 so that’s not the optimal choice.

File names are not being created correctly!!

Problem I have, and it seems to be an issue with iTunes in Windows and not Mac or in Windows Media Player for that matter.
Anyway, the problem is that the files are not being written as they are displayed in the Album Data in iTunes itself. It just appears as though iTunes will create any length of file name it wants and not the one that you create??
The reason I have an issue with this, is because I am trying to create one large album directory on an external Hard Drive connected to my Router so that any machine I have on the network can access it from there as opposed to creating a directory on every single machine.
I have a tone of discs that I am loading up and just felt that having one large directory on a networked drive would be the best route to take.
The machines I will be using to access the files using iTunes is my Mac Mini and my Windows PC depending on what room I am in, and then probably a few other devices scattered around the house to make up a Media network.
Anyway, the issue is with the file names.
It just seems that Windows iTunes wants to create whatever file name size it pleases, where as Mac iTunes and Windows Media Player seem to create the files as listed in the Track List and Album File Data.
It would seem that Windows iTunes has a serious bug in it's File Structure Handling which is a pain in the proverbial.
Just to test this out, I created the same Album both in Windows and Mac and the Mac version had the full file name structure but the PC one doesn't, however, Windows Media Player created it exactly the same as Mac iTunes.
It definitely appears as though there is an issue with iTunes in Windows, because it creates other albums without a problem. It just seems to pick and choose as it pleases.
Anyone else get this or know if there is a way to fix it??

Katrina S. wrote:
I'm not sure what you mean. Perhaps if you gave a specific example?
I put my CD's into iTunes so that they go in Album Format with the albums in seperate folders and the song names as they are retrieved from the internet, so that they are not songs all in one long Directory Listing. (Unless of course there is another way of using iTunes??)
When using iTunes on Mac or the Windows Media Player, all the songs are loaded onto the computer as they are written in the descriptions downloaded from the web.
Example in Directory format:
Artist Album Song Name
Queen - Innuendo - 08 These Are The Days Of Our Lives
This works fine in Mac iTunes or Windows Media Player. However, if I'm using iTunes in Windows, it may give me the following,
Artist Album Song Name
Queen - Innuendo - 08 These Are The Days O
Now, that is just an example and not a song that is affected, but it gives you an idea of what happens. It appears to happen on any Album and File Name combinations, and only appears to happen when using iTunes in Windows. The much longer filename and album names seem to be far more affected and I think this is to do with Windows Naming structure, but it doesn't explain why it's not happening in Windows Media Player??
The problem with this, is that when trying to use the same File Directory stored on my external Networked HDD for both Apple and Windows iTunes, the Windows version is causing havoc by doing what it wants where as the Apple iTunes seems to work as intended.
So when it comes to using either to rip a new CD to the library, I have to start using the Mac Mini each time because it seems to not be causing any issues when ripping discs.
I'm still in the process of sorting out my Album Directory and having to load everything up on the iMac so that everything gets loaded properly, but this seems to be a really bad bug in iTunes.
The reason I want to use this external NAS HDD is to keep my data in one area as opposed to having two large directories for both machine formats.
I hope that is a little more clear on what is happening.
P.S. Just to add to this. I prefer to use the PC for CD Ripping because the CD Drive is much faster than my Mac Mini and doesn't get anywhere near as hot when used constantly. I can rip 20 albums or more on my PC in the time it takes to sometimes rip just 5 to 10 on my Mac Mini, which is why I wanted this to work properly on the Windows version of iTunes.
Message was edited by: Capeview

My notes are not being passed from one device to another

My notes are not being passed from my ipad to my ipad mini.

There can be several different accounts in the notes app if you have email account that allow you to sync notes. I do not use iCloud email, but I have two IMAP email accounts that sync notes. I wanted to know if you were selecting the correct account on the Mini.
When you launch the Notes app, you can tap The Account button in the upper left corner in order to switch between accounts. If you do not have another Notes account, try turning Notes off on the Mini in Settings>iCloud>Notes>Off. Restart your iPad, go back in and turn Notes on again.

When I try to open Lightroom5 (creative cloud) I am taken to the Select Catalog screen but I have no catalogs and I am not being allowed to create new ones. What can I do?

When I try to open Lightroom5 (creative cloud) I am taken to the Select Catalog screen but I have no catalogs and I am not being allowed to create new ones. What can I do to correct this?

This could be a read/write permissions issue with the destination folder for the catalog. Use your favorite search engine to search for changing disk permissions. What operating system are you using?

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Check boxes are not being displayed in any list applets

Issue: The check boxes are not being displayed in any list applets in the system. A check box can be marked in the system, but as soon as the user clicks anywhere outside of the box the check box 'visibly' disappears. If you hover the mouse over the check box it displays a 'Y'. However, check boxes are working fine for the form applet, the issue is only with the list applet.
I verified the checkboxes work fine in the thick client and in production. However, it is the testing environment, which belongs to client, that is showing the above behavior. I think there is some setting that is missing for them. But I am unable to figure it. I would really appreciate if someone could help !!
Thanks in advance

One way that you could make it work (just tried it out again) is to use the windings font
and use the checkboxes from there. However, you need to register the font with xml publisher. In the template builder for Word, you can put a configuration file under:
C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\config
(depnding on your installation). The file should have the name xdo.cfg or xdoconfig.xml.
There is an example file: xdo example.cfg that you rename and change accoringly.
The font is there setup for windows 2000 as an example. Select the correct font
path - for my XP it is:
<font family="Wingdings" style="normal" weight="normal">
<truetype path="C:\WINDOWS\fonts\wingding.ttf" />
</font>
Then you can put the symbols into your RTF template and it will be rendered.
At least it worked for me - with 5.6.2. (Availbable on Wednesday or Thursday), but
I am pretty sure I tried it before with 5.5.
Didn't have the 5.5 manual with me - so I have to check what that says again..
Hope it helps,
Klaus

I'm being asked to enter my ID password on my ipad for icloud, but the email is no longer active and reset remails are not being received.

I'm being asked to enter my ID pswd on my ipad 2 for icloud. but the email address and ID are no longer being used, and reset emails are not being received. How can I deactivate this? I have another ID which works fine, but this issue with the old ID is not allowing me to use my ipad. thanks.

If your iPad is signed into an old ID and you are trying to change it, if the old ID is yours, and if it is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Yahoo e-mails are not being received on iphone 4.

Yahoo e-mails are not being received on iphone 4. I had to go website to retrieve about 50 emails from last couple of days. Everything looks correct in settings and I haven't changed anything that I know of. Please help if you've encountered this issue.

I tried the suggestion of deleting the account and starting over from scratch (twice), to no avail.

Flash CC crashes after publishing iOS app + publish settings are not being saved to file

I have two issues:
1. Flash CC crashes every time I publish an iOS app
2. My Publish Settings are not being saved
1. Flash CC crashes every time I publish an iOS app
Since yesterday Flash CC keeps crashing right after I publish an iOS app. The app is published correctly though. I tried everything from restarting my MAC, reinstalling Flash, removing the folder "Flash CC 2014" inside Application Support/Adobe. But all this did not work.
2. My Publish Settings are not being saved
Since the first day I installed Flash CC, it did not save my publish settings along with the .fla-file. I never had this issue with Flash CS 5.5. This was not a very big issue, but now every time I publish an app and Flash CC crashes I have to fill in all the publish settings manually. Now I'm getting frustrated. Even saving my settings as a preset, storing it inside a folder and importing it again, won't help. Then I will get the message: "Import failed: invalid profile file."
Can please anyone help me with these issues? It is quite time consuming to continuously enter the settings manually after every crash.
Thanks!

reset your preferences -
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

Mouse settings are not being saved

I just did a clean install of Lion (10.7.5) on a new SSD in a mac pro 1,1 and am having problems with my mouse settings. The settings are not being saved. When I change any of the buttons, nothing changes.
It's not a hardware problem with the mouse. If I boot up to my previous os drive, lion 10.7.5, the mouse settings are correct and function properly.

FOrgot to add, this is the basic wired mouse. I've also tried the wireless bluetooth mighty mouse as well with the exact same results.
I've tried removing the plist files with no success

HT4623 My messages are not being sent. Can someone help?

My messages are not being sent. Can someone help?

Alan, how you're doing?
You already know issue is not with the email account, since it's working on another devices.
Now you have to define whether it is a user specific or system wide issue.
Create another user account through system prefereces > users and groups. Try to set up account on the new test user.
If it works, get back to your main account, open mail application, go to menu > Window > open activity and connection doctor (Make sure you organize these tools in a way that allows you to see both mail windows and activity/ connection doctor... Now, try to send a test email and you will see where the issue is.
Then...
Go to mail preferences > select your email account > click the - button to remove it and + to readd account.
Fill your full name, email address and password. Now, hold down option key and press continue... Insert incoming and outgoing information.
Any doubts, feel free to ask.

Service order values posted to WBS, values are not displaying in CJii3

Hi,
We have posted thevalues from service order to wbs.
values are not displaying in cji3.
Regards,

Hi,
If the data has been successfully loaded into BPC, then it should be visible in BPC report.
You need to make sure that you are looking at the correct data region. Check in RSA1 and check which data region has the data. Maintain the same region in the report as well.
Hope this helps.

With new Free Characeristics Aggregates are not being used

Hi....i have a query from a multicube with two infocubes where i have two aggregates one for each cube...in my query both aggregates are being used with no problems....when i add a new free characteristic that appers on aggregates something happens and the aggregates are not being used anymore...i dont understand why this happens because i know that ......free characteristics ....doesnt affects the aggregates usage....is this correct??? or not?
Regards

Since this is an open forum, not Adobe support... you need to contact Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

WBS Correction are Not Being Allowed

Similar Messages

Maybe you are looking for