WCF Custom adpter configuration to CRM

Hi,
I am using WCF-Custom send port to communicate to CRM WCFService. I am getting the below error. I am not able to edit any properties.
Error Description: System.Configuration.ConfigurationErrorsException: The binding at system.serviceModel/bindings/ws2007HttpBinding does not have a configured binding named 'UserNameWSTrustBinding_IWSTrust13Async1'. This is an invalid value for bindingConfiguration.
at System.ServiceModel.Configuration.BindingsSection.ValidateBindingReference(String binding, String bindingConfiguration, ContextInformation evaluationContext, ConfigurationElement configurationElement)
at System.ServiceModel.Configuration.IssuedTokenParametersEndpointAddressElement.Validate()
at System.ServiceModel.Configuration.IssuedTokenParametersElement.ApplyConfiguration(IssuedSecurityTokenParameters parameters)
at System.ServiceModel.Configuration.IssuedTokenParametersElement.Create(Boolean createTemplateOnly, SecurityKeyType templateKeyType)
at System.ServiceModel.Configuration.SecurityElementBase.CreateBindingElement(Boolean createTemplateOnly)
at System.ServiceModel.Configuration.SecurityElement.CreateBindingElement(Boolean createTemplateOnly)
at System.ServiceModel.Configuration.SecurityElementBase.CreateBindingElement()
at System.ServiceModel.Configuration.CustomBindingElement.OnApplyConfiguration(Binding binding)
at System.ServiceModel.Configuration.CustomBindingElement.ApplyConfiguration(Binding binding)
at Microsoft.BizTalk.Adapter.Wcf.Converters.BindingFactory.CreateBinding(String wcfExtensions, String bindingName, String bindingConfiguration, String bindings)
at Microsoft.BizTalk.Adapter.Wcf.Config.CustomTLConfig.CreateBinding(THConfig thConfig)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.InitializeValues(IBaseMessage message)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2..ctor(IBaseMessage message, WcfTransmitter`2 transmitter)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfTransmitter`2.GetClientFromCache(String spid, IBaseMessage message)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfAsyncBatch`2.BatchWorker(List`1 messages)

Laxme,
As suggested by M.R.AshwinPrabhu,.
in his post below.
http://social.msdn.microsoft.com/Forums/en-US/c94dd38a-7322-4286-8dc6-e1e57c0c22c4/getting-error-while-try-to-create-an-record-in-crm-2011-from-biztalk-2010?forum=biztalkgeneral
Try following steps:
First make sure basic are correct:
Ensure the security configuration in your WCF send port are correct.
Make sure your binding matches with the client's binding.
Follow these solutions:
In many user's cases this issue is also due to clock's synchronization. Try as mentioned in the below mentioned link in reference section.
If the above doesn't work try this
Reference:
http://weblogs.asp.net/pabloperalta/archive/2012/05/14/quot-an-error-occurred-when-verifying-security-for-the-message-quot-when-executing-savechanges.aspx
WCF
Message Authentication Failure
http://parwej.wordpress.com/2009/09/04/an-unsecured-or-incorrectly-secured-fault-was-received-from-the-other-party/
Adding
to it, i would also suggest to check the certificate, it should be there in "trusted root provider" folder.
Rachit
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful
by clicking the upward arrow mark next to my reply.

Similar Messages

Error in WCF custom behaviour

Hi All,
Its been quite some time i am struggling with this issue.
we have a wcf custom behavior which validates the schema. on top of that i have implemented logic to remove any attachment node (in received xml file we have a record called attachments which intern contains element which holds attachment data) if size is
greater than 2.5MB then re construct the element with value saying "your attachment has been removed".
code every thing is working fine with single message but when do a load test (with thread = 5 and number of test =10 in SOAP UI ) then getting a below warnings. (with single thread is working fine)
The adapter "WCF-CustomIsolated" raised an error message. Details "System.Xml.XmlException: The input source is not correctly formatted. at System.Xml.XmlExceptionHelper.ThrowXmlException(XmlDictionaryReader reader, String res, String
arg1, String arg2, String arg3) at System.Xml.XmlBufferReader.ReadValue(XmlBinaryNodeType nodeType, ValueHandle value)
The adapter "WCF-CustomIsolated" raised an error message. Details "System.Xml.XmlException: The prefix 'k' is not defined.at System.Xml.XmlExceptionHelper.ThrowXmlException(XmlDictionaryReader reader, String res, String arg1, String arg2,
String arg3)
below is the code used to read the attachment size
using (AttachmentReader = message4.GetReaderAtBodyContents().ReadSubtree())
while (AttachmentReader.Read())
if (AttachmentReader.IsStartElement())
strNs = AttachmentReader.NamespaceURI;// read the namespace of message for schema validation
while (AttachmentReader.ReadToFollowing(AtmtNode)) //read attachment node
countAttachment = countAttachment + 1; //count the number of attachments in a message
AtmtSize = AtmtSize + AttachmentReader.ReadElementContentAsString().Length;// check the size of attachment content node
AttachmentReader.Close();
//check of the size greater than 2.5MB
IsSizeMax = (AtmtSize > System.Convert.ToInt32(validateAtmtSize)) ? true : false;
//if size is greater than 2.5MB then remove the attachment node and reconstruct the same
if (count == attachmentCount) // Finally write the attachment node with configured message (converted to base64) this will read all the attachment nodes and writes only one record inspite of multiple attachments
if (HasAtbt) // if "attachments" record has any attributes then create attachments record with
along attributes
wr.WriteStartElement(AtmtRecord, Ns);//This will create "attachments" record with
attribute
wr.WriteElementString(AtmtName, "RemovedAttachment.txt");//"attachment_content_name"
wr.WriteElementString(AtmtType, "text/plain");//"attachment_content_type"
wr.WriteElementString(AtmtNode, Msg);//attachme content node
wr.WriteEndElement();wr.Flush();
wr.Close();
bodyReader.Close();
strMsg = SB.ToString();
int fIdx = strMsg.IndexOf("</" + RefId + ">");
int lastIdx = strMsg.IndexOf("<" + RefId);
parashuram

Hi，
Please refer to the Q and A
http://code.msdn.microsoft.com/windowsapps/How-to-integrate-BizTalk-07fada58/view/Discussions

WCF-Custom Biztalk 2013 - Access to SQL Server 2014 Database

Hi,
i don't see nowhere of capability from the Biztalk adapter to access differente version of Sql server.
I want to send ou receive information with a WCF-Custom from SQL Server 2014, i'm in Biztalk 2013 (not R2 ) it's possible ?
Do you have a link or a list of version autorized to accessed by the wcf-custom Sql binging ?
Thanks a lot

Hi, I can suppose that the main problem for Joao is not if it works in general or not.
The real problem is that he is not sure if this configuration is officially supported by Microsoft.
If you are developing an integration project for a client you need to have this guarantee. If not, you can have an unsupported scenario, and if something fails you could have a big problem with your client.
If I were you, I would talk with the client account manager about this.
Regards.

Nonce property in WCF custom adapter

Hello All,
How to configure Nonce property in WCF Custom Adapter in Biztalk.
I have created custom assembly as mentioned in other blogs(http://weblog.west-wind.com/posts/2012/Nov/24/WCF-WSSecurity-and-WSE-Nonce-Authentication), where we can create UsernameToken to specfy it, but how to use it?
I have added it into GAC, but biztalk is not referring it.
Pooja Jagtap Software Engineer KPIT Cummins

Hi,
You should look into the following articles first:
http://msdn.microsoft.com/en-us/library/ms731075.aspx
http://msdn.microsoft.com/en-us/library/dd203050(v=bts.10).aspx#BKMK_ConsumeWCFSvc
You don't even necessarily need to code a new binding. Using the WCF-Custom adapter, you can choose your binding as customBinding (in the bindings tab of the port configuration), and then specify which binding elements should constitute your binding.
Of course, another workaround is to call a WSE 3.0 service using a developed external assembly in an orchestration.
Hope the information helps.
Best regards,
WenJun

WCF-CUSTOM and ORACLE

Hi there,
All I want to do is to create a prove of concept application via BizTalk Admin console.
The receive location is configured with:
Transport: WCF-Custom
Address (URI): oracledb://my_db_to_which_I_can_connect_from_sqlplus
pooledDaraAvailableStatement: SELECT USER FROM DUAL
polingInterval 5
polingAction : empty
polingStatement: SELECT USER FROM DUAL
The username and password are provided in the Other tab.
Next. I want the send port to grab the data from the receive location and save it over in C:\snd as %MessageID%.xml,
so this is my filter: BTS.ReceivePortName == Oracle_to_XML_RP
No errors in the event viewer, the application is fully started, but nothing appears in C:\snd
Anyone knows why ?

I'm not super up to date on Oracle, but I don't think SELECT USER FROM DUAL returnS a non-zero integer.
Maybe SELECT 1 FROM DUAL?

WCF Custom Adapter

Hi all,
I am facing the below mentioned issue while configuring the WCF custom Adapter in Biztalk Server 2013
WCF-Custom Transport Properties
Error saving properties.
(System.ArgumentException) Invalid binding.
(System.IO.FileNotFoundException) Could not load file or assembly 'Oracle.DataAccess, Version=2.111.7.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
Any one please suggest
OK

Dear Biztalk007,
I also faced the same issue but on Biztalk 2010. Here is what I did.
The issue may be three fold. You must have following installed in addition to your stand alone biztalk installation
1) Biztalk WCF Adapter pack
2) Biztalk LOB adapter pack
3) Appropriate Oracle Client.
But you must take care of the thing that a proper Oracle Client suitable to your needs. I am working on Biztalk 2010 and I intsalled Oracle 11g.
I am pretty sure ,yur error will be resolved after their installation.
Regards,
Mandar Dharmadhikari
Please mark as answer if this helps to answer your question.

Custom Application Configuration not pulling the data in E-Recruiting

Hello,
My requirement is to make some fields 'required', hide some buttons, change button texts & hide some columns in standard wd component (ERC_A_REQ_MGMT) delivered by SAP. So I created an application configuration and component configuration and did the layout customization. Now in the application I am passing this new configuration name with the parameter (sap-wd-configId)(......sap/bc/webdynpro/sap/erc_a_req_mgmt?sap-wd-configId=ZZERC_A_REQ_MGMT)
As this is a portal environment, in LPD_CUST, In the application parameters, I've used this parameter (sap-wd-configId=ZZERC_A_REQ_MGMT). The custom application is displayed, however, the data is not being passed to this custom configuration, so when I open a exisiting requisition from dashboard, this is shown as empty screen (like a new requisition), but when I take off this parameter from the lpd_cust, the standard app is working fine. Can you please help me understand why the data is not being passed to the custom application configuration?
Really appreciate your insights.
Thank you.

Hi,
We faced the same issue in SAP E-recruiting EHP4 solution. The reason is, the configuration which is assigned statically in FPM editor is loaded after the OVERRIDE_EVENT_OIF and thus discards all context nodes which have been already initialized. Afterwards, the context node of has no value anymore and the field on UI doesnu2019t display anything.
Remove the static component configuration in the FPM editor and use the following code in the wddoinit method of the view V_GEN_JOB_INFO. This assignment happens at the runtime.
data: lo_api_controller          type ref to if_wd_component,
        lo_pers_manager            type ref to if_wd_personalization,
        ls_configuration           type wdy_config_key,
        lt_config_table            type wdy_config_table,
        ls_config_header           type wdy_config_header,
        lo_fpm                     type fpm_s_runtime_info,
        ls_fpm                     type fpm_s_runtime_info.
      lo_api_controller = wd_comp_controller->wd_get_api( ).
     lo_pers_manager = lo_api_controller->get_personalization_manager( ).
     lo_fpm = wd_comp_controller->go_fpm->get_runtime_info( ).
    ls_configuration-config_id    = u2018ZERU_REG_REQ_MGMT_UIu2019 u201C Your Component configuration name
    lo_pers_manager->load_config_by_key( ls_configuration ).
   Thanks,
   S Rajkumar.
Edited by: Rajkumar S on Aug 24, 2010 7:54 AM

Displaying custom BI queries on CRM 2007 WEB UI

Hi,
I would like to know the process involved in displaying a custom BI query in CRM 2007 WEB UI. Can someone please advise ?
Regards

Hello,
there is SAP documentation available for this on service.sap.com/crm-inst
It is in the CRM 2007 -> Webclient UI folder.
cheers Carsten

WCF-Custom performance problem with large response messages

We're trying to debug a performance issue in Biztalk 2013 when using a WCF-Custom adapter to call en external WCF-enpoint.
From a Biztalk orchestration we're calling en external WCF-service to retrieve an xml message sometimes containing a lot of Base64 encoded data. The response message can be up to 10Mb in size. The send port is very slow in retrieving the response
and a 10Mb message can take up to 3min to retrieve. For comparison we've made a console program with the same service reference and binding as the Biztalk adapter uses and we can retrieve the same message in about 3 seconds.
The WCF is using binary encoding over http and we've set the maxMessageSize, maxBufferSize and maxBufferPoolSize to Int32-MaxValue. We realise that using Biztalk there will be overhead because the message is put into the message box but we're unsure how
to improve the performance of the send port.
Any suggestions?

Hello,
There are certain Optimization you can do with your BizTalk.
1)The first thing that I would do is to check the BizTalk SQL server jobs are running correctly
(SQL Sever Mgmt Studio –> SQL Server Agent –> Jobs). Lookout for the jobs with the word “CleanUp” in them.
2)Another check that you could do is to verify the entries in the Spool table
(Database[@Name='BizTalkMsgBoxDb']/Table[@Name='Spool']). Ideally, the number of entries should not be HUGE
(as in not over 100/200 entries)
3) Create seperate host and host handler for your send Port.
4) Set The MaxReceiveInterval from adm_service(BizTalk Management DB) class table 100 ms from 500(By default).
5)Increased the Throttling Settings Internal message queue size to 1000 from 100 In new Application Host.
6)Set the Maximum number of messaging engine threads per CPU to 40 (By default it is 20).
7) Add Max connection in your BTSNTSVC.exe.config file
<system.net>
            <connectionManagement>
                        <add address
= “*” maxConnections = “300” />
            </connectionManagement>
</system.net>
For other setting you can look for BizTalk Optimization Guide
http://www.microsoft.com/en-ca/download/details.aspx?id=10855
Above setting are for generic performance enhancement purpose.
Note: You can verify through Orchestration debugger or Orchestration tracing how much time send port is and pipeline is taking to publish the message to Biz Talk again .
These will give you better picture what more settings you need to apply .
Thanks
Abhishek

What is the difference of customer master data between CRM and ECC

Dear all,
We are helping customer to evaluate using CRM or ECC to manage there customer master data, focusing on the benefit of using CRM system.
Can any one help to compare the difference between these two system?
some tips in my mind are:
1. CRM has a friendly user interface for user to adjust the layout, hide/display favourite information according to actuall req.
2. In CRM, user can change the field/assignment block description easilly
3. in CRM7.0, user can add new customzing field easilly via AET
4. CRM has a good any analysis platform to provide pie chart analytic
5. CRM store more customer infor. than ECC, such as Marketing attribute, account classfication...anything else?
any other benefit to use CRM for customer master data? Pls help!!!
Thanks very much!!
BR,
Hedy

I would agree with most of the topics you mentioned. Just one remark to topic number 5. Business partner doesn't have more data than erp. It has some more marketing oriented data, but on other hand doesn't have all finincial and credit data that are relevant for erp financial transactions.
In our company we have the following scenario: all business partners are created in crm (because there the sales activities are started and because we don' clasify at the begining all partners as customers but as prospects. and of course it has nicer user interface). but when we are closing the deals (ordreds are transfered to erp), we fill some additional (financial) data of that partner on erp side and clasify partners as customers.
Regards.

BizTalk 2010 - WCF-Custom Adapter with sqlbinding - rror was encountered while attempting to transmit the message

BizTalk 2010 RTM version with SQL 2008 R2 .
An intermittent issue with the WCF-Custom adapter with sqlbinding, calling a SQL stored proc as below
Message gets suspended in BT Admin console with "An internal server error was encountered while attempting to transmit the message" .
Event log shows
A message sent to adapter "WCF-Custom" on send port "xxx" with URI "mssql://server/db?" is suspended. Error details: Unknown Error Description
Any advice please. Thanks
Sullu.
http://biztalkguide.blogspot.com/ Please mark as answer if this solved the issue.Thanks

Hi Chen
Is there any update on this please ?
I have applied the latest CU and have noticed the following issue.
BizTalk 2010 Enterprise Edition with BizTalk 2010 CU6 and CU3 for BizTalk Adapter Pack works fine , no issues noticed.
However ,
On a DEV VM ,BizTalk 2010 Developer Edition with BizTalk 2010 CU6 and CU3 for BizTalk Adapter Pack still gives the error mentioned in this post.
In addition Microsoft BizTalk Adapter Pack ,Microsoft BizTalk Adapter Pack(x64) & WCF LOB Adapter SDK are also installed .
Below is the Error message.
Message gets suspended in BT Admin console with "An internal server error was encountered while attempting to transmit
the message" .
A message sent to adapter "WCF-Custom" on send port "xxx" with URI "mssql://server/db?" is
suspended. Error details:
Unknown Error Description
Could you please check and advice what needs to be done to resolve this ? Thanks .
Regards,
Sullu
http://biztalkguide.blogspot.com/ Please mark as answer if this solved the issue.Thanks

Configurations for CRM 5.0 mobile

Hi All
I am trying to install & configure the CRM 5.0 mobile sales.
I have already installed the necessary components like Mob Repository Server, Comm Station and Mobile Client(on a laptop).
I have done necessary configurations in MRS & Comm. Station.
However I am not able to get any document which talks about the configuration activities required on mobile client. Typically I am unaware of any middleware settings required for initial load, sites, replication objects etc.
Is there any comprehensive guide / note which talks about it for CRM 5.0 mobile?

check the following links
http://help.sap.com/saphelp_crm50/helpdata/en/c7/95fc381478ab6fe10000000a11402f/frameset.htm
also chk the link on mobiles release notes at the following thread:
Links to CRM Documentation
http://help.sap.com/saphelp_crm50/helpdata/en/c7/95fc381478ab6fe10000000a11402f/frameset.htm
these links will help..
regards
RH

Custom sensor configuration for sensor mapping

Hi all,
I'm developing an application that performs sensor mapping of a STL model. I analyzed Sensor Mapping Express VI, it is very useful for development of my application.
But, my application requires to change sensore position or model or other settings at run time. Hence, I need to create a custom sensor configuration editor to define sensor positions, stl file path, and so on. (See attachment)
I don't understand how can I change sensors position at run time.
Thanks all.
Attachments:
sensorMapping.png ‏14 KB

Sorry, the reply above may have been a bit vague. I am trying to say that express vis are native labview code packed with an easy to use configuration front panel. You can access the underlying code by digging a bit deeper in to it.
1. Right click on the express vi and select Open Front Panel
2. Click OK to the warning message
3. Repeat Step1 on the resulting block.
4. Use Ctrl+M to view the vi in edit mode.
Then you would have access to all the inputs, in this case its a cluster with all the information. So with some more programming, you can add the extra customisation you would like.
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Customer pricing procedure in CRM

Can anyone please let me know how to find customer pricing procedure in CRM that is assigned to a particular customer.

Hi
Customer pricing procedure is assigned to a BP in the sales area data under the billing tab.
Check for any bp using the following steps
1. Use tcode BP and enter the BP number.
2. Choose the role Sold to Party
3. Choose the tab Sales Area data.
4. Choose your sales area and open the Billing tab.
Here you can see the customer pricing procedure assigned to the BP.
Hope this helps
Regards
Rekha dadwal

System Configuration for CRM Business Package 4.0-60.2 in Portal

Hi All,
We have configured CRM Business Package(4.0-60.2) on EP6 SP11.
Also created the SAP_CRM system with required fields.
But I am confused with where do I have to specify the ISA related parameters?
Should I create new systems with the aliases specified in CRM Business Package Admin guide(i.e.according to Web Entry Point names)For e.g. ISA_B2B,ISA_B2R,SHOP_ADMIN,USER_ADMIN etc. or I have to specify this in SAP_CRM system itself?
Your Help will be appreciated.....
Thanks and regards,
Amol.

Hello James,
Thanks for the prompt reply...
But my question is whether I have to make these changes in SAP_CRM system itself or should i create new system namely ISA_B2B,SHOP_ADMIN,ISA_B2R etc.
With regards,
Amol.
Note : If you have already configured the CRM business package, please send me the documentation or the screen-shots of the system defined in portal on my e-mail id([email protected])

WCF Custom adpter configuration to CRM

Similar Messages

Maybe you are looking for