WD Program calls RFC. How to start external ABAP debugger to see the data
Hi Experts,
I have created WD program which calls RFC. I want to see the value passed from WD to ABAP. I have to see the values once data reaches ABAP. How I can do so?
I did following.
1) se 37 . Open the proram. Inside the fucntion near a select statement I placed the cursor. Then clicked on controlshitfF9 (set/delete external brakepoint icon).
2) I clicked on WD screen - Save push button.
3) The data goes from WD to R/3. Some processing takes place. I can see message from R/3. However debugger never got triggered.
How to resolve the issue.
Regards,
Gary
go to following link.
External debugging of ABAP from NWDS in web dynpro java
I hope it helps.
Regards,
Rohit
Similar Messages
-
My iPad Air is disabled after wrongpassword attempts.I didn't sync it with my laptop also. How can I restore it with out losing the data.
You can't unlock it without losing data. It's too late for that now. You totally erase the iPad when you unlock it and you will have to start all over again. Most of your purchased content can be downloaded again.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Download past purchases - Apple Support -
Deployment error: Failed to start server localhost:25848. See the server l
Hi,
I am new to this Studio Creator 2 so that I decided to follow "Sun Java Studio Creator 2 - Tutorials - Using the Debugger".
I followed the instructions word by word and have no problem running it.
But Whenever I run it under the 'debugging' mode, I got an error ( at step 2. Examining local variables in the tutorial) as follows.
It directs me to look at the server log file for more and I clicked on the link on the same pane (Output window in the bottom of IDE) but it doesn't mean much to me -- partly due to me being a newbie???
Here is a bunch of error messages being generated under the debug mode[F5]. Did anyone have a similar problem before?
---- Messages from the output window -----------------------------------
init:
deps-module-jar:
deps-ear-jar:
deps-jar:
library-inclusion-in-archive:
library-inclusion-in-manifest:
compile:
compile-jsps:
pluto-hack-web-xml-run:
portlet-container-deploy:
jsCreatorDist:
debug:
Stopping server localhost:25848
E:\Program Files\Sun\Creator2_1\SunAppServer8\bin\asadmin.bat stop-domain --domaindir E:\Program Files\Sun\Creator2_1\SunAppServer8\domains\ creator
Starting debug server localhost:25848
E:\Program Files\Sun\Creator2_1\SunAppServer8\bin\asadmin.bat start-domain debug=true domaindir E:\Program Files\Sun\Creator2_1\SunAppServer8\domains\ creator
Start debug on localhost:25848 timeout or interrupted
Failed to start server localhost:25848
Deployment error: Failed to start server localhost:25848. See the server log file for details.
Exception=Deployment error: Failed to start server localhost:25848. See the server log file for details.
Deployment error: Failed to start server localhost:25848. See the server log file for details.
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:198)
at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:75)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:234)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:242)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:125)
Caused by: Failed to start server localhost:25848
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:152)
... 10 more
C:\Documents and Settings\Administrator\My Documents\Creator\Projects\DebugExample\nbproject\build-impl.xml:525: Deployment error: Failed to start server localhost:25848. See the server log file for details.
BUILD FAILED (total time: 4 minutes 31 seconds)Check the following :
Try starting the server without deploying. The server can be started from the server window. Also, check the server log file , will give more info on why it failed.
To view the Sun Java System Application Server log file:
In the Servers window, right-click the Deployment Server node and choose View Server Log.
In any text editor, open the log file in the following location: install-directory\SunAppServer8\domains\creator\logs\server.log
Please go through the FAQ titled "Why doesn't Application Server start up" which is at :http://developers.sun.com/prodtech/javatools/jscreator/reference/faqs/technical/depsrvs/
Also, the port used by default is localhost:24848 when I tried the tutorial .. -
How can I see the data in the aggregates
how can see the data available in the aggregates.
JayHi Jay,
its so simple,
please goto the manage aggregates screen and copy the technical name of the aggregate and add
/bic/exxx xxx is the aggregate technical name, and for f fat table use /bic/fxxx, and go to se16 and enter the table name and thats it ur data is with u.
R -
how can I restore my back up files from my laptop? i want to see the dates and time that I backed up my files. is it posssible?
What backed up files?
Available backups for an iOS device can be found in Edit > Preferences > Devices. -
How can I show a 0% range in the data value label on a bar chart thanks?
How can I show a 0% range in the data value label on a bar chart thanks?
I'm not sure what the question is.
I know that if you have a bar chart and one of the categories (X-axis) has bar (Y value) equal to 0%, no bar is plotted for that category. Even the addition of a stroke (line) around the bars doesn't make one appear for 0%. The only automatic way I know of to make it look like there is data in that category is to add the value labels to the bars. Inspector/Chart/Series, select one of the bars on the chart, click on "value labels". Another method that is a workaround is to fudge the number a little in your table so that instead of 0% it is a very small %. This will get you a thin line on the chart.
But if your question is about the value labels (the numbers that display on or in the bars) and you are not getting one for a bar that is supposed to be 0%, it probably means your table doesn't actually have a 0% in the corresponding cell. A blank cell in the table will not get a value label. -
How to see the data after deploying
Hi, I installed owb 9.2.0.2 and created a test mapping and deployed it successfully. It inserted few rows in my table. How can i see the data which was inseted other than SQLplus.
Can i view data trough any OWb reports or do I need to use discoverer or report tools to view the data.Hi Sam,
SQL Plus is one route, the other is indeed Discoverer or any relational query tool. For 10gR2 we are adding data viewers so you can see this directly in OWB.
Jean-Pierre -
Can anyone tell me how to do this in Flash? See the following link?
Can anyone tell me how to do this in Flash? See the following
link?
See this link. I want to know how to create the painting
excercise as made here.
http://disney.go.com/disneychannel/playhouse/littleeinsteins/activities/paint.htmlStart by looking at the drawing api for AS
-
How can I make an appointment to see the staff to repair
How can I make an appointment to see the staff to repair
If in US
http://www.apple.com/retail/storelist/ -
How we can see the data related to finance ??
Hi Gurus,
I have attend for one interview and faced one question is that how can we see the finance related data in r/3?
they asked the same question.
can you please let me know how we can see the data for perticular module like HR,FInance...
Points 'll be assigned..
Regards,
SyamFor Finance the standard datasources are
0FI_GL_4
0FI_AR_4
0FI_AP_4
Go to R/3 lbwe
select these datasources
click on manage
you will get a window with fields. here in the right hand corner there is a drop down which giives table names
OR
Goto RSA3 and give the datasource name -
I just upgraded to iOS 7 and I realized that the "Completed" tasks folder in the "Reminders" application was erased. I had important information there. How can I recover my completed tasks and the dates the tasks were completed?.
Restore from your iTune backup.
-
How can i see the date of the pictures i took? help!
how can i see the date of the pictures i took? help!
Import them to your computer (see http://support.apple.com/kb/HT4083) and the date and other exif data will be available.
-
How to see the datas stored in DBMS_SQL.Varchar2S variable?
how to see the datas stored in DBMS_SQL.Varchar2S variable?
it says error if i use dbms_out.put_line.in PLSQL :
procedure p_try (p_test IN OUT DBMS_SQL.VARCHAR2S) is
begin
p_test.delete ;
p_test( -3000) := '===============' ;
p_test( 22) := 'Hello' ;
p_test( 55555) := 'World' ;
p_test(987654321) := '===============' ;
end p_try;
set serveroutput on
declare
l_test dbms_sql.varchar2s ;
i number ;
begin
p_try (l_test) ;
i := l_test.first ;
while i >= l_test.first and i <= l_test.last loop
dbms_output.put_line (l_test(i)) ;
i := l_test.next(i) ;
end loop ;
end ;
===============
Hello
World
===============when using Forms, you would use TEXT_IO instead of DBMS_OUTPUT -
How to see the data records for a dso based upon the request id?
Hi all,
How to see the data records based upon the request id on the dso.
I need to see the data for a dso based upon the request id 444493 loaded from another dso through repair full update.
thanksHi,
Step 1: select your request from DSO request tb
Step 2: Select your DSO just above your contents/requests/reconstruction tabs
Step 3: Click contents(Spectacles symbol) in the top area of your screen
Step 4: Slect the required fields
Regards,
Suman -
My iMac turns on the start up chime sounds, you see the apple icon on the screen and then it just shuts off. Any ideas?
Do these two resets:
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.
PRAM RESET
Zap the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Maybe you are looking for
-
B&W G3 RAM into G3 iMac?
Is it possible to put RAM that I have installed in my B&W rev2 450MHz G3 into a 500MHz G3 iMac and vice versa? B&W G3 450MHz w/ 1GB RAM, 9GB HD Mac OS X (10.3.9)
-
Copy/Paste more than 64K from Excel to Oracle Forms
We need to copy from Excel more than 64K of data into Oracle Forms 10g. After the copy/paste action. The data will be split and saved in the database. The data contains 6000 fields of each 14 characters. What we tried: Create a Long field in forms (m
-
Oracle Linux 6.1 : No Internet Connection.
I am not able to connect to the Internet with Oracle Linux 6.1.First,I had Oracle Linux 6.0 installed and running normally with normal Internet connection.I did an upgrade(upgrade option of the installer) and I ended up with No Internet connection.I
-
Disculpen, etsoy al punto del desepero, tengo una urgencia técnica, estoy trbaajnado con la versión de prueba del cs6, utilizando normalmente el bridge, la edición de camera raw, pero oh sorpresa despues de un rato de editar en raw, se me desactivaro
-
I have about 4 Quicktimes that I have read out of FCP as DVCPRO HD 720p 60. That is their native format as well. These will end up on an SD DVD burnt from DVD Studio Pro. I need to know the absolute best way to compress these files and of course keep