How to see the data records for a dso based upon the request id?

Hi all,
How to see the data records based upon the request id on the dso.
I need to see the data for a dso based upon the request id 444493 loaded from another dso through repair full update.
thanks

Hi,
Step 1: select your request from DSO request tb
Step 2: Select your DSO just above your contents/requests/reconstruction tabs
Step 3: Click contents(Spectacles symbol) in the top area of your screen
Step 4: Slect the required fields
Regards,
Suman

Similar Messages

Where is the data stored for Formscentral subscribers based within the European Economic Area?

We are already experimenting with Formscentral for some basic survey collection tasks, but I am interested in the potential to collect larger and more complex data sets. However, being based within the European Economic Area it would be easier if the data collected from any of our online published forms remained within the EEA rather than being stored in the US.
Does Adobe store EEA customers' data within the EEA or is it all stored within the US?

Everything is stored within the US.
Randy

Why in SE16 we can not see New Data Table for standard DSO

Hi,
We says that there is three tables (New Data Table, Active Data Table and Change Log Table) of Standard DSO, Then Why in SE16 we can not see New Data Table of Standard DSO.
Regards,
Sushant

Hi Sushant,
It is possible to see the 3 DSO tables data in through SE16. May be you do not have authorization to see data through SE16.
Sankar Kumar

Can we change the data type of a field based on the value of the field

HI Gurus,
My Requirement is as below -- Could you please guide me
in the Printable Adobe form -- for ex - as usual for dates fields in the Object Pallette the object type is a date/time field and for quantity/currency fields corresponding fields are taken
now in case the either the date, quantity or currency is initial in place of displaying 0.00 or empty date we need to display N/A (Not Applicable)
for this I would like to change the data type of the field
to put it simply --
we need to change the data type of date field from DATE&TIME to Char type to hold N/A or Quantity field to Char field to hold N/A
how can we realize this in SAP adobe forms
Thanks in Advace
Ramchander Rao.K

Hello Ramchander,
     You cannot change the data type of the field at run time in Adobe forms because the type of field you choose at the time of design level is associated with the data type itself.
If you want to achieve your requirement, then your main idea should be to set the data type as CHARACTER itself while designing the field in the adobe form itself. CHAR field will comfortably hold the value of Calculation/amount field, Currency field, Amount, Date, Time HHMMSS, Unit Accuracy, Currency key, Floating point number, Numeric text, Client, Language and many other data types.
After designing the field as TEXT field in Adobe form you have two options.
Option 1:
Select the Date field initially as type TEXT field or CHAR field in Adobe forms.
Suppose the name of the field is TEXTFIELD1, then write the Javascript code on this field in Initialize event as below.
if ( this.rawvalue == null )
     this.rawvalue = "N/A";
If the field is not blank, then it will show the date. Else it will show "N/A".
Option 2:
Select the Date field initially as type TEXT field or CHAR field in Adobe forms. Do the formatting part in ABAP itself. It will increase the performance. Avoid Javascript as much as possible.
Suppose you have a DATE variable l_dats of type DATS. Then take another variable l_date of type CHAR. Then write the below ABAP code.
MOVE l_dats TO l_date.
IF l_date IS INITIAL.
     l_date = 'N/A'.
ENDIF.
Bind the l_date to the TEXT field in the form.
Even in this case, if the field is not blank, then it will show the date. Else it will show "N/A".
But I will suggest you to use Option 2 of keeping the AMOUNT, QUANTITY, DATE, TIME fields etc as CHAR or TEXT fields in Adobe form and do the required formatting in ABAP itself.

How to fetch the data records in summary format based on previous day

drop table T1;
create table T1(Class, Fees_Collected, Submit_Date) as select
'MBA', 100000, '7/30/2012' from dual union all select
'Btech', 20000, '7/10/2012' from DUAL union all select
'MBA', 45000, '8/1/2012' from dual union all select
'Btech', 55550, '7/31/2012' from DUAL union all select
'BBA', 250660, '7/30/2012' from dual union all select
'MBBS', 44556000, '7/31/2012' from DUAL union all select
'BDS', 420050, '8/1/2012' from DUAL union all select
'BBA', 30450, '7/30/2012' from DUAL union all select
'MBBS', 120450, '7/31/2012' from DUAL union all select
'BDS', 45950, '7/30/2012' from DUAL union all select
'MBA', 252450, '8/1/2012' from DUAL;My requirment is to fetch the records based on summary format to display the data with following columns -
Class |Prev Day Traded Value |Prev Day % of Total |Prev Day % MBA
Note - Previous Day definiton (Buisness Day) = calendar days - (weekends + US Holidays)
Kindly help me, as i want to keep it customized so that without specifying the hard coded dates ( Previous Day) it runs through and provide me the resultset....
All of your help and time is highly appericated.

You mean business days I guess ?
I use a function (I had to write it myself) <tt> next_business_day(p_start_date in date,p_days_count in number) return date </tt>
where I loop forward/backward from p_start_date according to the sign of p_days_count the required number of steps skipping weekends and holidays as the absolute value of p_days_count is mostly under 30 for the rest (at least around here) Oracle's <tt> add_months </tt> gets it done.
Regards
Etbin
Edited by: Etbin on 6.8.2012 17:55
Year till date: <tt> your_date between trunc(sysdate,'year') and sysdate </tt> is it ? http://en.wikipedia.org/wiki/Year-to-date ?
Edited by: Etbin on 6.8.2012 18:27
NOT TESTED!
function next_business_date(p_start_date in date,p_count_days in number) return date is
steps number := abs(p_count_days);
retval date := p_start_date;
begin
if p_start_date is null or p_count_days is null then
 return to_date(null);
end if;
while steps > 0
loop
/* skipping weekends and (yet to be implemented) holidays */
 while to_char(retval,'dy') in ('sat','sun') /* or is_holiday(retval) */
 loop
 retval = retval + sign(p_count_days);
 end loop;
/* retval contains a business day now */
 retval = retval + sign(p_count_days);
 step := step - 1;
end_loop
return retval;
end;

How to count number of records for a field based on condition?

Hi guys,
I want to know how to find count of records coming from the database for a particular field based on some condition.
I need to use this count to suppress some headers. Because of this i am not able to use running totals. Is there any other way?
Ex scenario:
I have account number and currency fields, those are coming from database. And i need to count the number of accounts whose currency is not Euro.
Thanks in advance,
Vijay.

A simple formula can do that:
//Formula begin
if {your account field}<>"Euro" then 1
//Formula end
This formula can be summarized. (by group or report)
Bryan Tsou@Taiwan

Attribute change run fails - "Error when deleting the data record /B05/X.."

Hello,
I get the error message "Error when deleting the data record /B05/X.." on doing the change run.
I have already done RSRV on this objects and found no errors, but still the activation fails.
please give your suggestions ASAP to fix the issue as it is on production system.
Thanks.

Attribute change run could fails due to 2 reasons-
(1) attribute xchange run is already runnnig for any toher object(monitor lock) (check by thi prog-RSDDS_CHANGERUN_MONITOR)
(2) data is loading deleting from the object on which attribut changerun is running.(go in a manage tab and check)
check this two conditions and rerun the attribute changrun again from program - RSDDS_AGGREGATES_MAINTAIN and give the master data name in the selection.
Hope it helps you.

How do I get ALL the info records for a materials plants using an SAP FM?

I need to get all of the info records from the EINE table for a material - all of its sites (plants, we are using SAP retail).
The problem is this: I call the FM MD_INFORECORDS_READ - here is the code for my call:
CALL FUNCTION 'MD_INFORECORDS_READ'
 EXPORTING
 imatnr = t_output_data-article <-- the material number
 iliefnr = lv_eina_key < -- see below on how I get this
 importing
 eeine =
 TABLES
 exp_eina = it_eina
 exp_eine = it_eine
 EXCEPTIONS
 no_eina_record_found = 2
 no_eine_record_found = 3.
lv_eina_key is taken from this call:
SELECT SINGLE altkn INTO lv_vendor_no
 FROM lfb1
 WHERE lifnr = lv_site (plant)
 AND bukrs = t_output_data-company_code.
The probelm is it only returns the first record it finds for each site. There could be multiple info records, each one based a a different Valid From date for each site. I need either ALL of the EINE records for each site OR the most current one
I know I am not using ALl of the parms in the FM - but are there maybe there are other ones should I be using.
Perhaps there is there another FM I should be using - cause I do not have the info record number to pass.
Thanks.
Scott

Never mind - the FM does work - this was bad data.

How to Dynamically Select the Data File for a Report at Print Time

How do you configure a Crystal report to ask for the file to be reported on as the report is being printed, and allow the user to browse to the file?
The environment is Crystal Reports XI, SP3, with ODBC connection to Sage Timberline Office data version 9.7. The client names their Payroll unposted time file each pay period, and also needs to report on their posted data file, depending on the time period for the report. The client will need to select both the date range and the file name.
I have created a SQL statement in Add Command in Database Expert, which prompts for a file name, but it does not let you browse to select a file on the computer.
Therefore, in the prompts when they print the report, the parameter offers the user a default file name similar to the name they currently use, so they only have to change the payroll period end date in the supplied file name to run the report successfully.
The client is concerned that sometimes a user will name their data file differently, and not know how to input the file name into the Crystal report prompt at print time.
My research on dynamic prompts showed you can link to fields inside the data record, but I did not see a way to dynamically link to select the actual files used in the report.
Another question is that the naming convention used by the SQL query is different than the basic Windows file name, but I think I can handle that issue.
The actual file name is typically similar to:
04-10-11 BP NEW.PRT
However, in the SQL query, the record ID looks like:
PRT_00-00-00 BP NEW__TIME
The SQL Statement using a parameter is:
SELECT
"PRT_CURRENT__TIME"."Employee",
"EMPLOYEE1"."Employee_Name",
"PRT_CURRENT__TIME"."Date",
"PRT_CURRENT__TIME"."Units",
"PRT_CURRENT__TIME"."Job",
"JOB1"."BP_Emps_Used"
FROM
"PRT_CURRENT__TIME" AS "PRT_CURRENT__TIME"
INNER JOIN "JCM_MASTER__JOB" AS "JOB1"
ON "PRT_CURRENT__TIME"."Job"="JOB1"."Job"
INNER JOIN "PRM_MASTER__EMPLOYEE" AS "EMPLOYEE1"
ON "PRT_CURRENT__TIME"."Employee"="EMPLOYEE1"."Employee"
WHERE "JOB1"."BP_Emps_Used" = 1
AND
("PRT_CURRENT__TIME"."Date" BETWEEN
{?As of Date} - 41 AND {?As of Date})
UNION ALL
( SELECT
"PRT_NEW__TIME"."Employee",
"EMPLOYEE2"."Employee_Name",
"PRT_NEW__TIME"."Date",
"PRT_NEW__TIME"."Units",
"PRT_NEW__TIME"."Job",
"JOB2"."BP_Emps_Used"
FROM
"{?NEWPRT}" AS "PRT_NEW__TIME"
INNER JOIN "JCM_MASTER__JOB" AS "JOB2"
ON "PRT_NEW__TIME"."Job"="JOB2"."Job"
INNER JOIN "PRM_MASTER__EMPLOYEE" AS "EMPLOYEE2"
ON "PRT_NEW__TIME"."Employee"="EMPLOYEE2"."Employee"
WHERE "JOB2"."BP_Emps_Used" = 1
AND
("PRT_NEW__TIME"."Date" BETWEEN
{?As of Date} - 41 AND {?As of Date})

Hello,
Sorry you'll have to contact Sage on how to do this. We can help you once you get connected but we can't help you get around their connection methods.
There is no Preview Set Database Connection method you can use in CR Designer. The Designer assumes you select it first or use the Set Location option before previewing or refreshing the data.
If you are doing this in the Sage program itself we can't help you, you'll have to contact Sage for assistance.
Sage is an OEM Partner they are responsible for supporting their product and CR. If they have issues help you then they will contact us directly for assistance.
Thank you
Don

How to find who has created the determination records for packaging instruc

how to find who has created the determination records for packaging instructions in POF1.
need to find the user details from POF3.
can any one plz suggets me.

Sunny,
Go to POF1 click on determined record -> Display -.> enter-> F8 then -> double click on the record for which you want to see the responsible person ->click on admin. data tab here u will find the responsible person. hope u got the right answer.
Ravi Thapliyal
IdhaSoft

How to transpose the data records (rows) to column(lists) using apd

Hi,
how to transpose the data records (rows) to column (lists) using apd in sap bw.
I do not want to use abap routine.only use the transpose rows to list transformation .
Pls provide the step by step procedure .
thanks,
Nimai

Save youe file to transpose as a csv and in the header row of your file for the columns you want to transpose you need to put some soer of a tag before the column name (ie your colum header was for a period budget will be something lie 2011001:ZFIBDD)
1. You will need to create a new apd process (rsanwb)
2. Insert a "Read from Data File" data source object and map it file (,csv)
3. insert a transpose object into your apd process (middle row 4th one over in the transformations section)
4. under the definition tab in the transformation object select all the columns that are to be transposed into rows and move them to the transformed area, the grouping fields section should contain the rows that you want to now be columns
5.under the transformation tab enter in the seperator you selected under the Field Name/Infoobject area (ie. ZFIBDD)
6. under the details tab you need to enter in all the fields to be transformed and tner the transposition field (ie ZFIBDD)
7. Then you can insert a set of transformations and a DSO and link the newly transposed fields into that.
hope that helps

How do I move data files from old iPhone? Specifically, the password files for the App mSecure from my old iPhone 3Gs to iPhone 4S?

How do I move data files for mSecure (a password saver app) from old iPhone 3GS to new iPhone 4S?

That article is about using your iPod as an external hard drive, to move files from one computer to another computer. It is not related to your question.
You can't use iTunes to move song files from iPod to computer, except for songs you purchased from the iTunes Store (and you can also re-download purchases). However, there are third-party methods and utilities that can move song files from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
Once the song files are on your current computer, add them to that computer's iTunes library by dragging the files (or folder containing the files) to the iTunes window. After confirming everything is there (and fixing the data issue you mentioned) you can sync the iPod. You may want to do a Restore on the iPod, if it might have a data corruption issue, which will erase the iPod's hard drive, re-install the latest software, and set it to defautl settings.

How to get the Data Record Number in BI 7.0?

Hi All,
In our requirement we need to load the Data Record Number in the DSO. I got the Request ID and Data Packet Number but not the Data Record Number.
Does anyone has any idea?

Hi......
When the data is activated in DSO, it is written to the table of active data, where it is then available for reporting. Requests are sorted by the key of the DataStore object, request ID, data package ID, or data record number.
You just load the data to the DSO.....and activate it.......it will autometically get generated.......You cannot load it from one DSO to other beacuse in this case Change log table is used........and this filed is in active table..........I think you need this fir reporting purpose.....so load it and activate the DSO......then it will be available in your active table for reporting.........because reporting is done on active table.......
Check this link :
http://help.sap.com/saphelp_nw04s/helpdata/en/a9/49453cabf4ef6fe10000000a114084/frameset.htm
Hope this helps you....
Regards,
Debjani....
Edited by: Debjani Mukherjee on Sep 16, 2008 5:22 PM
Edited by: Debjani Mukherjee on Sep 16, 2008 5:25 PM

How to maintain 2 condition record for the same message type

Hi,
My requirement is that I have got a PO output type NEU.Now when i release the PO 2 mesages should get outputed.
1) A print should go to the Printer ie:Option1 Print output
2) A PDF should go to the vendor ie:Option 5 External send
I have completed the config part but I am having a problem while maintaing the condition record for simultaneous output of message 1 & 5.
In MN04 i tried to maintain 1 & 5 but it doesn't allow me to do so?Why
How do I output 2 messages while releasing the PO
KN

Please check this answered link:
Re: Two PO Outputs.
Re: Emailing PO to Vendor, copy to buyer as well
Edited by: Afshad Irani on Jun 16, 2010 12:05 PM

Query regarding the data type for fetcing records from multiple ODS tables

hey guys;
i have a query regarding the data type for fetcing records from multiple ODS tables.
if i have 2 table with a same column name then in the datatype under parent row node i cant add 2 nodes with the same name.
can any one help with some suggestion.

Hi Mudit,
One option would be to go as mentioned by Padamja , prefxing the table name to the column name or another would be to use the AS keyoword in your SQL statement.
AS is used to rename the column name when data is being selected from your DB.
So, the query Select ename as empname from emptable will return the data with column name as empname.
Regards,
Bhavesh

How to see the data records for a dso based upon the request id?

Similar Messages

Maybe you are looking for