We get "uFF06uFF03x0;" from sender JDBC adapter

Thank you.
This is naoki kurihara.
We have a problem in sender JDBC adapter.
We use java mapping and sender JDBC adapter in PI7.1 on Windows.(DB is sqlserver)
and we test the interface and we found error.
the reason is to get "＆＃x0;" from JDBC adapter.
and our java mapping can't parse it. and we got error.
the column is not null.
how we can prevent "＆＃x0;",
(sorry I cant write "＆＃" 1byte word, so I wrote 2bytes word)
please give me your help!!
Thanks

Hi,
Replace the & character with &amp ; in your java mapping. The same goes for these special characters:
< with &lt ;
> with &gt ;
" with &quot ;
' with &apos ;
Please remove the space between the escape character and the ; in your Java mapping. The spaces are typed here because the equivalent characters are not displaying correctly.
It should be able to handle the # though. Hope this helps
Regards,
Mark

Similar Messages

Executing an Oracle Stored Procedure from Sender JDBC adapter

I could really use some help from someone who had done this before.
I've read the help about using the JDBC sender adapter, but it's not helping enough.
I found this line: "Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs."
That's definately what we want to do, but we can't figure out the syntax.
The procedure in oracle looks like this:
CREATE OR REPLACE PROCEDURE test_ref_cursor
( cur_generic IN OUT result_sets.cur_generic)
as
BEGIN
Open cur_generic for
select
   proposal_number,
   to_char(sequence_number),
   column_name,
   column_value,
   update_timestamp,
   update_user
   from
   coeus.sap_test;
END test_ref_cursor;
And we have tried every kind of statement we can think of, but the file adapter always gives us an "invalid sql statement" error.
Does anyone know what syntax we need to put in the "Query SQL Statement" in the JDBC sender adapter in order to call this procedure? Or is there something wrong with the procedure that is causing the error?
<i>I will absolutely return and give points, but PLEASE read my whole post before answering and do not just link me to or quote the help for configuring a sender JDBC adapter or blogs that are about the JDBC adapter in general but do not deal with the issues I am having. Thank you.</i>

Hi Vanda,
Unfortunately, the sender JDBC adapter does not support Oracle's store procedure/function. Unlike stored procedures from other database vendors, Oracle returns a cursor, not a resultset. The sender JDBC adapter must send a resultset to XI.
There are 2 possible ways you can accomplish this:
1. Use BPM and call the Oracle stored procedure using a receiver adapter via a asynch-synch bridge.
2. Develop a user-module for the adapter, which can be used with a sender adapter.
Thanks
Prasad

Parameters to stored procedure from sender JDBC

Hi,
I am using the JDBC sender adapter to call the Oracle stored procedure. Oracle version is 10.2. hence I m using function call using select.
My concern is, how to pass the input parameter to Oracle function from JDBC sender.
Regards,
Kavita

Hi Kavita,
<i>I am using the JDBC sender adapter to call the Oracle stored procedure</i>
<i>Unfortunately, the sender JDBC adapter does not support Oracle's stored procedure/function. Unlike stored procedures from other database vendors, Oracle returns a cursor, not a resultset. The sender JDBC adapter must send a resultset to XI.</i>
Executing an Oracle Stored Procedure from Sender JDBC adapter
[Not sure about latest versions of Oracle]
<i>can I pass the input parameter to this function? </i>
In my opinion, No
<i>If not, I need to change the approach, and need to use receiver JDBC[as need to pass input parameter]. </i>
This could be possible but havent tried it
<i>Can JDBC Receiver adapter support stored procedure for Oracle[10.2]</i>
Yes
Regards,
Prateek

Need help reg sender JDBC adapter

Hi,
I am having a requirement like, i need to fetch the data from two data base tables. and after fetching the data, i need to update those two tables.
For selecting the data from two tables, two select statements i need to write, how i can give two select statements in sender JDBC comm channel.
In sender JDBC channel, only one update query we can give...how i can update two tables?
Regards,
Venkata Ramana.

Hello Venkat,
For your requirement, go for stored procedure and find the below thread.
Fetching data from JDBC without using JDBC sender adapter
Re: Executing an Oracle Stored Procedure from Sender JDBC adapter
Re: Sender JDBC adapter not picking up data
Re: Retrive data from two diffirent tables
hope this will help you
Thanks,
Venky

Sender JDBC Adapter : Fetch records from multiple tables

Hi Friends,
I am using sender JDBC adapter to select few records from DB2 database table.
This scenario is working fine.
Now my requirement is to fetch records from 3 tables. These table are independent to each other. There is no primary key or foreign key.
Please let me know how to write the sql in sender JDBC adapter to fetch records from these 3 tables.
Thanks,
Sandeep Maurya

hi sandeep...
if the tables are completely independent and do not share any primary / foreign key relation ship...
why dont u think towards creating a seperate interface for each of them..
or if u still want to select from multiple table at once..the best way would be to write a stored procedure on the sender side which do all the fetching n processing and pass the final resultset to PI
or u can think towards fetching the data from 1 table and then in UDF do lookup from other tables..which again is tricky and performace intensive

TO Get Ensuring Exactly Once Processing data from sender soap adapt

To XI Specialists
Now Im trying to get Ensuring Exactly Once Processing data from sender soap adapteter.
My plan is that send data from Receiver adapter, to Sender adapter by SOAP.
(1st interface is ABAP to Soap "BE", 2nd interface is Soap to File "EO")
Sender SOAP adapter will returun Ensuring Exactly Once Processing data.
(see SAP HELP, http://help.sap.com/saphelp_nw70/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm )
AND I want to get Ensuring Exactly Once Processing data, I want to determine what to do in ABAP proxy.
SO I made and tested 2interface. but error occuered.
I checked the error, and Now I know what is the cause.
The cause is that Ensuring Exactly Once Processing data didnt enter the payload, at Receiver Adapter.
1st interface coulnt get the payload data, so mapping error occuered....
Please give me help,
<b>"How to get Ensuring Exactly Once Processing data From Sender SOAP ADAPTER"</b>
or
<b>"How to enter Ensuring Exactly Once Processing data into Payload of Receiver SOAP ADAPTER"</b>
and more excelent way....
our XI is version7.0 and SP10
Please teach me your wisdom!
Naoki Kurihara

I seeked and I noticed that
maybe I catched the message but the message dont have payload.
so I got no_payload error.
I checked SAP note.
I noticed, no_payload error will be managed to nomal message at SP13....
my XI is SP12....
I ll seek for another way!!
Thank you! noaki

Problem in sender JDBC adapter

hello,
I am facing one typical problem in sender JDBC adapter.
Here is the issue,
JDBC API method getString threw an exception: java.sql.SQLException: Cursor state not valid.
Can anyone please help me out in solving this problem?
Actually after a retry of 3 times the message has been successfully sent. Till then i am getting these error
On 1st attempt ,
Error during conversion of query result to XML java.sql.SQLException: Cursor state not valid
On 2nd attempt,
Error during conversion of query result to XML java.sql.SQLException: Internal driver error
(class.java.lang.InterruptedException)
On 3rd attempt,
Processing finished successfully.
This is the scenario that i can see in the audit log.
Can you please help me out in solving this issue.
Thanks,
Soorya

Hi gaurav,
It was a good response from your side.
I have gone through the FAQ but could not able to find anything.
Can you please help me out in this regard ?
Also i am using select query of this kind,
SELECT
SEFVHRC.VHRBRCD,SEFVHRC.VHRCUCD,SEFVHRC.VHRVIN,SEFVHRC.VHRMOCD,SEFVHRC.VHRCHAS,
SEFVHRC.VHRSLOR,SEFVHRC.VHRDIVI,SEFVHRC.VHRMGCD,SEFVHRC.VHRMOCH,SEFVHRC.VHRVHTY,
SEFVHRC.VHRBDTY,SEFVHRC.VHRMFYR,SEFVHRC.VHRMOYR,SEFVHRC.VHRMODS,
SEFVHRC.VHRMDTL,SEFVHRC.VHRCLBR,SEFVHRC.VHRRCID,SEFVHRC.VHRARDT,
SEFVHRC.VHRLUTM,SEFVHRC.VHRLUDT,SEFVHRC.VHRKEYN,SEFVHRC.VHRCTORN,
SEFVHRC.VHRCTIMP,SEFVHRC.VHRPRDT,SEFVHRC.VHRPRDT,SEFVHRC.VHRRCDT,
SEFVHFT.VHFCLCD,SEFVHFT.VHFCAT,SEFVHFT.VHFCADSC,SEFVHFT.VHFKEY,SEFVHFT.VHFTEXT1,
SEFVHFT.VHFTEXT2,SEFVHFT.VHFTEXT3,SEFVHFT.VHFTEXT4
FROM
SAPTESTLIB.SEFVHRC,SAPTESTLIB.SEFVHFT
WHERE
SEFVHRC.VHRVIN = SEFVHFT.VHFVIN AND SEFVHRC.VHRSTTS = ' '
and update query of this kind,
Update SEFVHRC SET VHRSTTS = 'R' WHERE VHRSTTS = ' '
I am using prity big select query. is there any option to optimize it?
Can you please help me out in solving this problem
urs,
Soorya

Sender JDBC adapter...problem

Hi,
the real problem is Sender JDBC adapter sends data in following format.
<?xml version="1.0" encoding="UTF-8"?>
<resultset>
<row>
     <Associate_ID>16444</Associate_ID>
     <Associate_Name>Sudhir</Associate_Name>
     <Status>false</Status>
</row>
</resultset>
But in Design time mapping...structure of source message will be like
<?xml version="1.0" encoding="UTF-8"?>
<ns5:DB2File_DB_MT xmlns:ns5="urn:db2file">
<Resultset>
    <Row>
      <Associate_ID>16444</Associate_ID>
      <Associate_Name>Sudhir</Associate_Name>
      <Status>false</Status>
    </Row>
</Resultset>
</ns5:DB2File_DB_MT>
How does this tag ... <ns5:DB2File_DB_MT xmlns:ns5="urn:db2file"> get generated in runtime
and apart from 1 to 1 mappings b/w the three fields above in the row tag...wt other mappings to be performed
Pls help...
Sunita

Hi Sunita,
what i understood from your query is namespace tag is coming while message mapping. This namespace can be avoided in the message type if you keep the XML namespace field empty while creating message type. But i afraid you have to do the message mapping again.
Regards,
Satish

Sender JDBC Adapter - Stored procedure

Hello all, I just read a lot of topics in this forum about this subject.
I found two indications in contracdictions in the documentation :<a href="http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/frameset.htm">Configuring the Sender JDBC Adapter</a>
1. Concerning Query SQL Statement
You have the following options:
● Specify a valid SQL SELECT statement to select the data to be sent from the specified database.
● Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
2. Concerning Update SQL Statement :
This is recommended if the data has not only been read, but also changed by a stored procedure entered under Query SQL Statement.
It is ambigous, isn't it ?
My question is simple :
Does somebody already use Sender JDBC Adapter with Stored procedure as Select statement including many steps :
- update actions on database
- select query to return data to XI adapter
(Update statement stay empty or with value <TEST>.
To provide more information, I have a reference table to read. But this reference table must be updated by a stored procedure before being able to be read accordingly.
So As I can't do both process with Sender Adapter (call a procedure and execute a select statement) => I want to include both actions (updates and select) in an alone stored procedure.
Could I get wanted data as a resultset ?

Hi,
>><i>Update statement stay empty or with value <TEST>.</i>
It should be <TEST> if you do not want an Update to happen.
Regarding Sender JDBC adapter with stored procedures, which DB are you trying to access. Sender JDBC adapter does not support Oracle Stored Procedures as they return Cursors and Sender JDBC adapter can deal with only Resultset.
As for executing both Update and Select in the SP, though I havent tried, this should surely be possible.
Regards,
Bhavesh

Sender JDBC Adapter Select/Update Issue

Dear All,
We have configured a Sender JDBC Adapter to Poll data from the DB2 tables. It is working fine and both the select and the update queries written are also getting properly executed and are changing the status of the flag from Y to N once read from database.
In the communication channel ->
select * from <table> where flag = 'N'.
update <table> set flag = 'Y' where flag = 'N'.
But I have one doubt after executing the select query some new data comes into the table of status flag 'N"., then will this unselected data will also be updated to 'Y' .
The question is while we do a select and update from XI on the DB table and at the same time there is an insert happening into the table from the other end how will the adpater behave in this case.Will it result in missing of some records during next select/update transaction from XI..
Your inputs will be appreciated.
Regards
Amit

Amit
Did you ever get a solution to your question ?
Sender JDBC Adapter Select/Update Issue
Posted: Apr 24, 2008 2:29 PM Reply
Dear All,
We have configured a Sender JDBC Adapter to Poll data from the DB2 tables. It is working fine and both the select and the update queries written are also getting properly executed and are changing the status of the flag from Y to N once read from database.
In the communication channel ->
select * from <table> where flag = 'N'.
update <table> set flag = 'Y' where flag = 'N'.
But I have one doubt after executing the select query some new data comes into the table of status flag 'N"., then will this unselected data will also be updated to 'Y' .
The question is while we do a select and update from XI on the DB table and at the same time there is an insert happening into the table from the other end how will the adpater behave in this case.Will it result in missing of some records during next select/update transaction from XI..
Your inputs will be appreciated.
Regards
Amit

Sender JDBC adapter SELECT / UPDATE issue - updates more rows than selected

Hi,
We have configured a Sender JDBC Adapter to poll records from an Oracle table based on a flag field and then update the flag for the selected records. When tested in DEV and QA environments (where test data comes in intermittently and not in huge volumes), itu2019s working fine.
Both SELECT and UPDATE queries written in the Sender JDBC adapter are getting properly executed and are changing the status of the flag for the selected records from Y to N once read from the database.
select * from <table> where flag = 'N'.
update <table> set flag = 'Y' where flag = 'N'.
But in the PROD environment (with records getting updated in the database every second), after XI executes the SELECT query and just before the UPDATE query is executed, new records come into the Oracle table with status flag 'N". So when the UPDATE query runs just after the SELECT query, then these unselected records also get updated to 'Y'. Thus these records never get into the resultset and hence XI and thus remain unprocessed.
So when XI does a SELECT and UPDATE on the Oracle DB table and concurrently there is an INSERT happening into the table from the other end, the JDBC sender adapter is picking up a certain number of records but updating the status of more records than it picked up.
So how does XI deal with such a common scenario without dropping records?
Thanks,
Vishak

The condition being checked is the same for both SELECT and UPDATE statements.
Initially I tried setting transaction isolation levels on the database to repeatable_read and serializable but it was throwing me a java.sql.SQLException error saying that these transaction levels were not valid.
I asked for these transaction level permissions for the XI user from my DBA but the DB I am accessing provides only a view into other databases and so it's not possible.

About sender jdbc adapter

can I define multiple query statments in sender jdbc adapter?
because i wanna get multiple recordsets from database according to multiple querty statements.
like:
<recordset1>
      <row>
              <col1>
             <col1/>
             <col2>
             <col2/>
    <row/>
<recordset1/>
<recordset2>
      <row>
              <col1>
             <col1/>
             <col2>
             <col2/>
             <col3>
             <col3/>
            <col4>
             <col4/>
     <row/>
<recordset2/>
such as:   order and order item scenario.
in general,how to implement the scenario?
i have to make use of BPM to resolve the problem?
ple give some hint and stuff about this. thanks a lot!!!

Hi Joy ,
Check out this :
http://www.codeproject.com/Messages/2516517/Re-How-to-write-the-multiple-query-in-single-store-procedure.aspx
Hope you will find this discussion informative : http://forums.asp.net/p/1021356/1765680.aspx
Regards,

Error while executing the stored procedure through sender JDBC adapter

Hi All,
I am getting below error while executing the stored procedure through sender JDBC adapter.
Database-level error reported by JDBC driver while executing statement 'exec SapgetNextEntity 'SalesOrder''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor.
what is the problem? any idea to anyone...
regards
Ramesh

hi Dharamveer,
I am not getting below statement for your reply
Try to use Refrence Cursor it will return u reference of resultset.
I mention SP like this
exec SapgetNextEntity 'SalesOrder'
SapgetNextEntity -
> SP Name
SalesOrder----
> Parameter I am passing...
regards
Ramesh

Stored procedure in Sender JDBC Adapter

Hi All,
My Scenrio goes like this ...
Stored Procedure(SQL Server) --- PI -
File
I need to write the results of stored procedure to File.Here I don't need any mapping.So how many DT , MT and MI need to be created?
The interface need to run by 6AM from Monday to Thrusday, how can i achieve this ?
Stored Procedure has only select statement and no Update statement , but it takes Date as Input parameter , so what i need to provide in sender JDBC adapter.
Thanks,
Monish

Hi Monish,
As per your requirement it is JDBC to File. Please be careful with the structure to be created for sender JDBC. I am unable to understand why you donot require a mapping for this. How XI will send the data to a file then.As per my knowledge if it's file to file and just pick and drop then we can neglect IR and go for ID.But here you are working with JDBC and File so you will be in need of it.
IR:
DT: 2
JDBC_Sender_DT
File_Output_DT(Optional)
You can use the JDBC sender data type structure for File output also.
MT as per your DT
MI:2
Outbound MI: JDBC structure
Inbound MI : File structure
MM: 1
IM: 1
ID as similar to other scenarios.All 1 objects for RD,ID,Sender Agreement and Receiver Agreement.
Sender JDBC channel:
Query: Select * from table where date
But I have a query how are you providing date in input paramerter.It will be dynamically entered into the query right.
You can mention the Avalibility planning for your interface to work in RWB.
Go to RWB>Component Monitoring>Adapter Engine->Communication Channel Monitoring>Avaliablity Planning
Please explain.
Regards,
Nutan

Stored procedure : how to call SP in sender JDBC adapter for mysql

HI friends ,
we have JDBC---->XI--
>SAP scenario. For some business requirement, we have to call STORED PROCEDURE , please let me know how to call SP in sender JDBC adapter for mysql .
Thanks
mojib

Hi Mojib,
Please create a sample stored procedure like this which contains select statement and in communication channel give
wite stored procedure name only to sql query statment and in update statement write <test>.
I am executing this stored procedure successfully.
Create Proc GetResultX As
Begin
Select * From TESTX
End
Execute statement for stored procedure is :
Exec GetResultX
Regards
Laxmi Bhushan Jha
Rewards point if found usful
I have given same answer to one of the same thread

We get "uFF06uFF03x0;" from sender JDBC adapter

Similar Messages

Maybe you are looking for