Web analysis on https on weblogic

hi all,
can we do web analyser on https on weblogic and how to access https on workspace i.e my web analysis from workspace
madan

Hi Madan,
1. Yes, you can configure it even on https , login into web logic console and provide information of SSL port number, keystore and certificate ..etc
2. after this , re configure the web server config part of workspace , to access web analysis from workspace
hope this helps
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Similar Messages

Web Analysis link is loading up just Blue screen

When clicking from workspace link->web analysis . It's loading a blank blue screen and message is coming client loaded.
Any help will be appreciated.
Thanks In advance.
MohanBir

Can you get to Web Analysis directly :-
http://<servername>:16000/WebAnalysis/WebAnalysis.jsp
Try running Web Analysis in the foreground and not as a service to check for any noticable error messages.
John

Do I need install web analysis on client machine?

I have installed web analysis in the server, to let the user to access web analysis, should I also install web analysis in the user's machine, or just let them access the web analysis URL, http//hostname:16000/webanalysis ?

They should really access through the workspace port :- http://hostname:19000/workspace/index.jsp login and then access WebAnalysis via workspace
or http://hostname:19000/WebAnalysis/WebAnalysis.jsp
It should automatically download the java client if the user does not have it installed.
If a JRE is not installed it should deliver jre-1_5_0_17-windows-i586-p.exe
Cheers
John
http://john-goodwin.blogspot.com/

Configuration problem with Applet Hyperion Web Analysis

We have installed Hyperion Web Analysis 9.3 on IBM Websphere 6.1 however we have some problems when we try to enter Web Analysis URL (http://localhost:9085/WebAnalysis/WebAnalysis.jsp) due to Applet Web Analysis Client do not initiate. We had checked Web Analysis logs and we found the next error:
[10/9/07 19:35:09:814 CDT] 0000002a SystemOut O [ERROR] WebContainer : 0 com.hyperion.atf.internal.services.containers.UserSessionContainer - org.apache.ojb.broker.metadata.ClassNotPersistenceCapableException: com.hyperion.atf.services.ControllerLock not found in OJB Repository
Any ideas about why we are getting this error and how to fix it?

Hi,
I guess you might have better luck if you post on the Hyperion forum: Essbase
B.

Web Analysis Crashes

Hi,
I just installed Web Analysis 11.1.1.3 on windows 2003 x64. I used WebLogic 9.2 as web server. The services goes up without a problem.
When I call the web page http://10.253.125.65:16000/WebAnalysis/WebAnalysis.jsp it opens de page and starts loading java. However it never opens the new windows and explorer crashes (i've tried with mozilla and the same thing happens)
any idea what it could be?
thanks,
Sebastian

your client does not have the right version of the jre installed.
open the jre console to see more errors.
Edited by: Detlev on Nov 17, 2009 9:06 PM

Urgent: Could not start the Web Analysis services

Hello Experts,
I am having issues when starting Web Analysis Services. Could not start the Web Analysis services
starting weblogic with Java version:
java version "1.5.0.07"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0.07-_20_mar_2007_05_31)
Java HotSpot(TM) Server VM (build 1.5.0.07 jinteg:03.20.07-11:05 IA64, mixed mode)
Starting WLS with line:
/opt/java1.5/bin/java -server -Xms256m -Xmx512m -XX:MaxPermSize=128m -Dhyperion.home=/hyphome/Hyperion -DESS_ES_HOME=/hyphome/Hyperion/BIPlus/appsinfo/WebAnalysis/EssbaseJAPI -Datf.session.binding.kill-with-prejudice=true -Dweblogic.j2ee.application.tmpDir=/var/tmp/hyperion -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0 -da -Dplatform.home=/hyphome/bea/weblogic91 -Dwls.home=/hyphome/bea/weblogic91/server -Dwli.home=/hyphome/bea/weblogic91/integration -Dweblogic.management.discover=false -Dweblogic.management.server=http://localhost:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/hyphome/bea/patch_weblogic910/profiles/default/sysext_manifest_classpath -Dweblogic.Name=WebAnalysis -Djava.security.policy=/hyphome/bea/weblogic91/server/lib/weblogic.policy weblogic.Server
<Jan 6, 2010 12:28:36 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 1.5.0.07 jinteg:03.20.07-11:05 IA64 from Hewlett-Packard Company>
<Jan 6, 2010 12:28:37 PM IST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: Unable to obtain lock on /hyphome/Hyperion/deployments/WebLogic9/./servers/WebAnalysis/tmp/WebAnalysis.lok. Server may already be running
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:159)
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:59)
at weblogic.management.internal.DomainDirectoryService.start(DomainDirectoryService.java:82)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:365)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:116)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:630)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:67)
>
<Jan 6, 2010 12:28:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Jan 6, 2010 12:28:37 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Jan 6, 2010 12:28:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Any suggestions would be of great help. Thanks in advance.
Regards,
Sudhir
Edited by: 637223 on Jan 6, 2010 1:54 PM

Are you sure there is not another web analysis web application process running, have you checked the processes running on the machine, you may have to kill or stop one of them to release the lock.
Cheers
John
http://john-goodwin.blogspot.com/

Web Analysis is not working

Hi,
I recently installed Hyperion BI+ in my server and I'm trying to do some reports in Web Analyzer.
My installation and configuration went successfull.
I can open FR, IR ..
I'm trying to open WorkSpace and Web Analysis...
both are not working...
When Im trying to open web analysis using the below URL Im getting error..
http://<servername>i:19000/WebAnalysis/WebAnalysis.jsp
but when I'm using this URL http://<Servername>i:16000/WebAnalysis/WebAnalysis.jsp
I can see the open page.. but the Web Analysis window is not coming.. I'm getting blank page...
and for workspace also.. when I'm using 45000 port.. it is working but I cannot open any reports.. some debug error is coming..
when I'm using the default port 19000.. Im getting network error...
Please help me in this issue..
Do I need to do any modifications in my configuration or property files....
my Java application is Tomcat(default).. databases is Oracle 10G Enterprise Edition.

Hi,
Regarding Web Analysis- I believe- It's a problem of JRE.
- Just remove/uninstall the JRE from your Currently installed Programs. You may want to reboot the m/c
- Open Web Analysis Studio in the Web browser. Now, since it can't find JRE, it'll set up the relevant JRE for you & you may continue using Web Analysis.
- Please note- Unless you've changed to a different one during configuration, Web Analysis operates on 16000 port.
Check the following regarding Workspace-
- Your service may be down, thus, throwing Network error
- You may've to re-configure Workspace. Start the service & wait for few mins. before opening Workspace.
- Natesh

Issue while opening the web analysis reports

Hi,
One of our user is not able to open a web analysis report with an error messages saying
"Java.Lang.Exception: Unexpected HTTP status code of 500 received from server"
"Document does not exist or no authorization to open the document"
Other users with the same level of access are able to open the report fine and also the same user is able to access the report fine with a test id from his machine.
What could be wrong? Any suggestions please.
The only thing I see here, something wrong with userd ID or password.
Thanks
Prasad

Hi,
I had also faced this problem earlier. I was using HFM as data source for WA reports. After searching I found that there was some change at HFM level. Some dimensions/members had been deleted or added in HFM. And I was using those missing members in WA Grid.
I had to recreate my reports again as I didn't get any other way to deal with this problem.
Please shared any other alternative option, if you found while working on this issue.
Thanks & Regards,
Mohit Jain

Unable to open web analysis reports through workspace

Hi,
I am connecting web analysis with MSSQL server 2000 and generating reports. I am using essbase 9.3.1 version.
But my problem now is that I can just open these reports from web analysis studio and cannot open them from workspace. In workspace, if I right click on the report and open it from web analysis studio it does open. But it does not open by double clicking the report in workspace. It just shows a blank report on just parts of the report.
The issue is only there for the reports that are getting data from relational db (MSSQL server 2000). The other reports that are using the cube data are fine and opening from everywhere.
Are there any other configuration settings involved in order to open a web analysis report(that uses relational db) from workspace?
Thanks in advance,
John

Hi Atul,
Try using the in built config checker:
http://localhost:16000/WebAnalysis/config
This has several tests you can perform to see what's running.

Unable to access java web application index page on Weblogic server 10.3.6

Hi,
I have deployed a Web application on Weblogic server.
My war file is very basic with just a index page.
I am able to deploy & access its index page properly in OC4J ( applicaton server on soa suite 10g ) and apache tomcat.
But when i deployed same war file in weblogic am not able to access its index page, Getting below error:
Error 503--Service Unavailable
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
*10.5.4 503 Service Unavailable*The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay may be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
status=Prepared, Consolidated State=Prepared, Target-Specific State= Prepared.
what does Prepared indicates here?*
Adminserver.log prints blow log when i try to access the index page
####<Dec 26, 2012 8:27:17 AM GMT> <Warning> <netuix> <soa-app-dev-01.am.health.ge.com> <AdminServer> <[ACTIVE] ExecuteThread: '21' for queue: 'weblogic.kernel.Default (self-tuning)'> <501226496> <> <9b375c7445d8c121:79ee4f70:13bc880be7a:-8000-0000000000000209> <1356510437306> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=WebAppApplicationOverviewPage&WebAppApplicationOverviewPortlethandle=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3D*Weblogs*%2CType%3DAppDeployment%22%29.>
My Deployment descriptors are as below:
Web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5">
<display-name>Weblogs</display-name>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
</welcome-file-list>
<servlet>
<description></description>
<display-name>SOA11gLogServlet</display-name>
<servlet-name>SOA11gLogServlet</servlet-name>
<servlet-class>com.ge.healthcare.soa.logs.SOA11gLogServlet</servlet-class>
</servlet>
</web-app>
==================================================================
weblogic.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app xmlns:wls="http://xmlns.oracle.com/weblogic/weblogic-web-app" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://xmlns.oracle.com/weblogic/weblogic-web-app http://xmlns.oracle.com/weblogic/weblogic-web-app/1.3/weblogic-web-app.xsd">
<wls:weblogic-version>10.3.6</wls:weblogic-version>
<wls:context-root>/Weblogs</wls:context-root>
</wls:weblogic-web-app>
==================================================================
Please help me to resolve the issue,its bit urgent.Let me know in case of anything else required to check and verify.
Thanks in advance.
Regards,
Rahul Aahir
Edited by: 978673 on Dec 26, 2012 4:22 PM
Edited by: 978673 on Dec 26, 2012 4:32 PM

In weblogic 10.3.6, when you deploy using console, you have to click on start button which appears in Deployments page.
Your weblogic.xml file should be as below:
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app xmlns:wls="http://xmlns.oracle.com/weblogic/weblogic-web-app" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://xmlns.oracle.com/weblogic/weblogic-web-app http://xmlns.oracle.com/weblogic/weblogic-web-app/1.3/weblogic-web-app.xsd">
<wls:weblogic-version>10.3.6</wls:weblogic-version>
<wls:context-root>/logs</wls:context-root>
<container-descriptor>
<index-directory-enabled>true</index-directory-enabled>
</container-descriptor>
<virtual-directory-mapping>
     <local-path>/opt/oracle/logs</local-path> (as per your path)
     <url-pattern>/logs/*</url-pattern>
     <url-pattern>*.log</url-pattern>
</virtual-directory-mapping>
</wls:weblogic-web-app>

Web Analysis functions not working in Workspace

I am looking for a list of Web Analysis functions that are available in the Java client that will not work in the Workspace DHTML client (Version 9.3.1.0). Any guidance would be appreciated.

There are 4 types of differences:
- font differences, Workspace (DHTML) uses the WA Server fonts whereas WA Studio client machine fonts.
- Service Buttons are very restricted using Workspace
- Display: Tab selection, Splitter panels, Slider selection do not render in Workspace
- Cannot restrict WA Tools menu in Workspace at all, where you can in the Studio.
For exact details check out the Hyperion Web Analysis Studio User’s Guide from the Doc Library:
http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_4.htm
Cheers
Iain

Problem with Web Analysis

Hi,
With the help from some of the experts in this forum, I have finished installing and configuring the following 3 Hyperion 9.3.1 products (in this order) on our Windows 2003 development server.
V11229-01.zip (Hyperion Shared Services)
V11207-01.zip (Hyperion Reporting and Analysis - Services Release)
V11223-01.zip (Hyperion Reporting and Analysis - UI Services Release)
The backend is an Oracle 10g database.
I can successfully log into
(1) Shared Services @ http://localhost:58080/interop as admin/<default password>
(2) Web Analysis @ http://localhost:16000/WebAnalysis/WebAnalysis.jsp with the same userid/password (that I used to log into Shared Services)
(3) Workspace @ http://localhost:45000/workspace/index.jsp with the same userid/password (that I used to log into Shared Services)
This tells me I probably configured these componently correctly.
However, it seems that I cannot do something basic in Web Analysis Studio. For Example, if I try to do
File->New->Document Wizard, most of the menu options under "File" are grayed out.
To be precise, the following options under "File" are grayed out.
New, Open, Edit, Close, Close All, Save, SAve As, SAve as HTML, Properties, IMport, Export, Email As LInk, Print
so, I could not even do File->New.
In fact, the "Edit", "View" and "Display" menu items in the menu bar are grayed out as well.
As you can see, I can do very little in the Web Analysis Studio (I am logged in as admin user, which is the only user now).
Is this a permission issue? or did I fail to install some necessary components?
Also, in this forum, how do I post a screen capture (saved as an image)?
thanks in advance for your help.
ST

Hi,
pls. try to give admin user more rights (Provision to "Report Designer" or "BIPlus Administrator" - I dont know exactly which roles are available concerning BI Plus suite).
Kind regards
André

HYPERION WEB ANALYSIS STUDIO RELEASE 1 1 . 1 . 2 .

Hi
I have an issue regarding Hyperion Web analysis Studio Release 11.1.2 I am using ESSBASE as a data source.
I want to make a report that aggregated rows between two Dimensions (lob and Accounts).
Instead of adding two dimensions in the row section I want one cell the aggregates the two dimensions
The value of the cell is the result of the intersection between the two dimensions.
For example instead of having
Account| LOB
I want a cell that calculate (LOB->Account) for each row
thanks
Edited by: 840149 on Feb 27, 2011 8:45 AM

You may have more success posting in the hyperion reporting forum :- Hyperion Query and Reporting
Cheers
John
http://john-goodwin.blogspot.com/

Need Help: Web Analysis, Unable to retrieve the data & Security Tab missing

Hi
I'm new to Hyperion (our version: 9.2.1) and we're implementing Hyperion Planning. One of the reporting tools is Web Analysis.
I'm trying to create simple grid reporting. but I'm unable to retrieve the data instead the result is "n/a"
and
The File's Properties > Security tab is missing
Does anyone know my issue?
Thanks,

Hi Experts,
You told its resolved.how?
I am having the same issue i am unable to retrive the tables.
"Database:MS SQL Server
Driver :weblogic.jdbcx.sqlserver.SQLServerDataSource.
Connection String:jdbc:weblogic:sqlserver://localhost:1433;databaseName=BAM"
Please help if you have resolved this issue.Any helpful links plz forward [email protected]
Thanks

Hyperion Web Analysis- Issue in fetching data 50000 rows

Whenever trying to fetch more than 50000 rows in a Hyperion Web Analysis report, the output is truncated to 50000 rows only. A message is displayed for the same.
As a solution we have tried the following
1) Increase the MaxDataCellLimit and MaxJDBCCellCount to 999999 and restarted the services
2) Ftchmembersize has also been increased and services restarted.
However inspite of trying out these options with few a more rows than 50,000 the report is not opening.
Please suggest a workable solution with Hyperion Web Anaysis to handle records between 50000-300000 range.( Source may be Essbase or relational).
Which tool in Hyperion suite 11.1.2.1 would be the best candidate to handle transactional rows of huge volume ?
Regards,
Anirban

Why don't you try Smart View or the excel addin, Web Analysis was not really designed to dump large amount of rows into it.
If it is just an extract you are looking for then there lots of export options.
Cheers
John
http://john-goodwin.blogspot.com/

Web analysis on https on weblogic

Similar Messages

Maybe you are looking for