Web Content moved into KM?

I'm looking at incorporating internal web content into our enterprise portal. The website is currently developed using Frontpage, and as such has lots of extra html and javascript that just doesn't need to be there. For example, the layout is entirely table drive (yuc), and there's navigation menus that don't need to be displayed, since the portal will have it's own navigation scheme.
My thought was to extract the content from the website (we have the source, of course), remove the Frontpage garbage, clean up the HTML, and present the content in the portal. I can't just use a URL iView to expose the content (and filter out parts of the page) since as soon as a link is clicked, the entire web page is shown, not just the captured area. Yuck.
The logical place to put the content is in KM, and then expose it via the portal, but I have a few issues around this:
1. All the links in the HTML are absolute. Do I have to convert all these links to KM-based urls, or is there another way? I thought I could use the HTML filter to insert a <base> tag, but this doesn't seem to work (as soon as I defined a HTML filter the repository manager barfs with an error). Should I look at using the HTML Filter further to insert a base tag, or is there a better way?
2. Workflow, and version control. I assume that if I configure the repository correctly, I can implement both workflow (for approvals) and version control - is this right? Ultimately, I would like users able to create content, but require approval for the content to be released into the wild for consumption.
3. Another option we're looking at is using KM solely as a content management system, and using another web app server to present the content. In other words, edit the content via KM (or the Portal Drive), and at various checkpoints extract the content and publish it to the (non-sap) production web server. Is this practical? My guess would be no, since placing the content into KM really implies that you'll be using KM to present the data. My initial tests with the Portal Drive imply that while this would likely be possible, it's probably impractical.
I'm looking for some guidance on how best to proceed with this. Suggestions are most welcome. I would be most interested in knowing how other folks have created internal company information and published it on the portal/km.

I can probably answer your second question based on what we have implemented here. Yes you can have both versioning and approval set up on the same repository. Infact If I am not wrong versioning is needed for approvals to work.

Similar Messages

How to pull contents of Web Content (UCM) into a JSPX?

I have a folder in UCM with few HTML files.
l need to load all the HTML files from the UCM folder to a single JSPX page in JDeveloper.
Final outcome of that JSPX should load the contents of HTML files.
Can any one suggest??
Regards,
Kumar

This is what SSXA (Site Studio for External Applications) was made for. See this manual/tutorial: http://docs.oracle.com/cd/E23943_01/doc.1111/e13650/toc.htm

How to fit HTML into a web content overlay?

How can I fit a 640px x 960px HTML generated from Adobe Animate into a Web content overlay with 640x x 960x dimension graphic frame?
When I uncheck the "scale content to frame" option, the HTML was scaled up--cropping 3/4ths of the image. But with the scale content frame option selected, the HTML was scaled down showing the whole image but on a 1/3rd scale.
The article format is set to PDF.

I assume you mean Edge Animate.
What version of ID? Did you fully patch Edge to 1.0.1?
If you have CS6 you can just place the OAM file.
Bob

Web Content overlay crashing! Help?

Everytime I try to use the Web Content overlay, InDesign CS 5.5 crashes. Working in Mac OS 10.6.8, for what it's worth.
I have a local html file that should display an RSS feed. When I try to bring it into my InDesign file with the Web Content overlay, everything seems fine until I try to save or preview; that's when InDesign spins and spins and spins until it crashes. I've tried much simpler html (just a black box that should appear on the screen) just to test, but it still won't work.
Here are my steps:
1. Create local html file and test in browser. No problems.
2. Within InDesign document, create bounding box to exact size or larger of what the html file will take up. No problems.
3. Using the Web Content overlay, choose my local html file to go in the box. Autoplay on. No problems.
4. Preview or save. CRASH.
Am I doing something wrong? Is anyone else having this issue? Help?

I have been getting exactly the same thing happening. I worked on this months ago and gave up eventually.
I tried again yesterday and after a few crashes I got this to work. Not sure exactly what fixed it as I tried many things but here is a rundown. I did get multiple crashes but persisted this time.
I made a new document to house my animation, it was 200 x 400 pixels (size does not matter as long as its consistent - see further on).
I created the animation in Indesign CS 5.5 and tested. Once I was happy I exported the FLA into a folder. Not sure if this helped in any way but I moved the Indesign doc into the same folder.
I used Wallaby to point to the FLA and converted it into HTML5 and saved all the elements into the same folder. I dropped the .html onto the browser and it worked fine.
I then drew a frame in my Indesign doc exactly the same size as previous, ie 200 x 400 pixels (again not sure if this had any effect on fixing the issue but it worked for me). I used overlay creator/web content to point to the .html file. I saved the folio and uploaded it to DPS.
When I checked this on the iPad it works fine.
Again, not sure how or what exactly fixed this but it works.
Could just be that the more you try it the less it crashes and eventually works. :-s
Hope this helps.

HT2497 My Mac keeps closing Internet. The message states "Safari Web Content quit unexpectedly" and then the window is full of computer jargon. HELP!

I click on the Safari logo, page opens but then quickly after closes and the message "Safari Web Content quit unexpectedly" opens with a whole load of computer jargon below.
Any ideas how to fix?
Thanks

This crash is caused by a bug in the way Safari synchronizes with iCloud.
Uncheck the box marked Safari in the iCloud preference pane. You may also need to do as follows.
Back up all data.
Triple-click the text on the line below on this page to the clipboard, then copy it to the Clipboard (command-C):
~/Library/Safari/Bookmarks.plist
Quit Safari.
Select
Go ▹ Go to Folder
from the Finder menu bar. Paste into the text box that opens (command-V), then press return.
A folder window should open with a file named "Bookmarks.plist" selected. Move the selected file to the Desktop, leaving the folder open.
Relaunch Safari. It will open with the default set of bookmarks. Delete them all. Select
File ▹ Import Bookmarks
from the Safari menu bar. Import from the bookmarks file you moved to the Desktop. Arrange the bookmarks as you wish.
Select from the menu bar
History ▹ Clear History
and confirm. As far as I know, you don't need to reset Top Sites, but I'm not sure of that.
You can then try to re-enable Safari in iCloud. It may start to crash again. In that case, you'll have to leave synchronization disabled until a more permanent solution turns up. Sync bookmarks with iOS devices in iTunes instead.

Short of dismantling and recreating a page how do i find out whats causing [Error: Invalid URL for Web Content Overlay]

Hi,
i received an indesign file to include in a folio that had links to the creators desktop where they had the assets for the web content overlay. When i try to update the folio i get the error message:
"Content generation error.
[Error: Invalid URL for Web Content Overlay]"
Which is fair enough.
The problem is, i have gone through and changed all URLs that I can see, but there is one somewhere, that I just can't find.
Is there a way to get a list of all web content overlays in a particular file? otherwise i will need to recreate the whole page again, and it has some pretty complex interactions which i rather wouldn't do.
I also cannot ask the original doc creator to just change the links as i'm sure he'll have the same issues as me, at not being able to track down the erroneous link.
The problem I have with DPS is that its not very transparent. you'll have to click on everything, and into every group to see what actions are on it, which can be extremely time consuming and frustrating when complex interactions are included.
thanks in advance for any assistance

I’ve found watching the process helpful to narrow down the page.
Working off a duplicate of the file, delete one layer at a time until you figure out what layer the problem is on.
From there it’s a bit easier to narrow down.

Help with html files when placing Web Content overlay

Hi there,
We have an educational app with lots of interactive exercises - all of which were initially designed in Flash.
I have converted the fla files into hmtl using Wallaby. For each fla file, Wallaby creates a js, css and html file as well as an assets folder.
When I place the Web Content frame, and link it to the html file, do I link it to the actual html file Wallaby created? It won't let me select the folder with all of the files in it as is, and I can't link it to a zip file either... So how does it recognise the assets if I only select the html file? (see screenshot)
Or do I need to add an HTMLResources folder and link it to that?
Thanks in advance for any help given.

You link to the HTML file but make sure these things are in their own folder or InDesign will add EVERYTHING in the folder that has the html file in it.
Bob

Invalid URL for Web Content Overlay. Help?

I am doing a french tranlation to an existing folio app that someone else created.
There is one page in my folio that is comprised of garbage and a trash can. You touch the garbage and drag it into the trash, and things change, etc.
I have an index.html file and a bunch of other images.
I can't even successfully add the article to my folio, I get this warning: Content Generator Error. Invalid URL for Web Content Overlay.
Can you walk me through how to get this to work?
Attached is a screen shot of my file structure...

When you specify the .html file, all the content in that folder is uploaded automatically. Here's an article about Web Content overlays:
http://help.adobe.com/en_US/digitalpubsuite/using/WS9293e1fb3b977c5c73657495129f66e490f-7f fa.html
And here's an article and video about HTML articles:
http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60530cf39c12f5fcd6d46-80 00.html

Typekit font not displaying in iPad DPS app (created by Indesign) in Web Content (Edge Animate)

I think I have tried every permutation to make this work, but I am probably missing something.
I am creating a single DPS iPad app with InDesign, and I am using a Typekit font throughout. So far so good.
I have created an Edge Animate project using the same Typekit font. In preview mode, it is fine as well.
However, when I place the Edge Animate project into a frame in InDesign and use the Web Content Folio Overlay (regardless of whether I use the .oam file or link directly .html output published by Animate), the Typekit font will not show up in the Edge Animate portion of the DPS app and will instead use a fallback font.
Can anyone suggest a way to make Typekit fonts in Edge Animate work when embedded in a DPS app? (For what it's worth, I have the same problem when embedding html output from Tumult Hype, so it seems unlikely that this is an issue with Edge Animate at all and probably has more to do with something in the way the DPS app is dealing with embedded html content.)
Thanks in advance for any assistance.

Believe me, I understand the pain. Unfortunately there's only so much we can do at Adobe as the EULAs provided by the foundries for their respective fonts are very explicit in where you can and can not use them.
For example, packaging an InDeisgn file and sending it off for pre-press with the fonts included in the package is in direct violation of most font EULAs. In a studio environment, you're only allowed to have a font installed on n number of computers and need to have multiple licenses to accomidate >n number of seats. When creating a PDF, fonts explicitly have to be subsetted before embedding into the PDF.
That's just to paint a picture of the fragile state of using fonts in print, usage in digital mediums is just another bee in your bonnet when it comes to considering when you can and cannot use a font.
Services like Typekit Desktop are trying to make this easier by removing a lot of those pain and condierations for you, by blanketing all these fonts under a single license you're free to use for print and the web. There's still some gotchyas, but we're aiming to greatly reduce how much you have to think about it where we can.
So yes there's a bit of education when it comes to mixing embedded HTML content/fonts with DPS, but at least there's options
Sarah

Web content stopped working - could someone have a try?

Last week I created a little HTML file that shows an audio play button. When you tap it, it starts streaming 30 seconds of audio (from Amazon, yes I know, naughty, but it's just a proof of concept) and the button changes into a pause button. Repeatedly tapping the button has the effect of resuming playback or pausing until the audio clip has finished.
It works in Safari and Chrome. And last week, it was working on my folio pages (not Desktop Content Viewer) when put in a small web content frame and set to Auto Play. Now the audio playback has stopped working and I've no idea why. Would anyone like to have a go? The HTML and two buttons are here (only 7KB):
http://dl.dropbox.com/u/1130319/blockheads.zip
Unzip it and try it in a web browser. Then try it on a DPS folio page on your iPad. If it works for you, then I've done something odd. If it doesn't work for you, perhaps it was only working for me last week in a dream.
Thanks!

Alistair, I just loaded the HTML in Safari as well as in a folio and in both instances I could not hear the audio. [update: Google Chrome is also not playing any audio]
I do know that internally we had an escalation where HTML5 audio was reported to not be playing. Across a handful of iPads we found that in MobileSafari some iPads would play the audio, others would not. We were unable to find a pattern, perhaps it's an access rights issue?

Web Content overlay error

Not sure why I am getting this error all of a sudden, but when I try to create a Web Content overlay by linking to a local html file I am getting a "Scrip Alert: Invalid URL for Web Content Overlay".
This isn't making any sense to me. A few days ago I successfully created a folio while creating a Web Content overlay with a local file and now this morning I am trying to link to the same html file the exact same way and it's not working.
I am using InDesign CS 5.5 on Windows 7 64-bit. Any ideas?
Thanks in advance!

Figured it out! totally by mistake, there had been an object that was pasted into the file that was filled with a PMS color. Once I converted that PMS color to an RGB process color that took care of the script error.
weird!

Web Content Overlay - iFrame Width Issue

I'm adding a web content overlay in one of my articles. I've created and hosted a webpage that contains an iFrame of a Google Form.
When I select my text frame in the article, apply the Web Content Overlay option, add the URL, and load/test the folio on my iPad, the iFrame width I set in my html file isn't taking effect. The web overlay isn't displaying (and wrapping the text and form) according to the width that I specified in the html file. Testing the html file in different browsers on my desktop shows a change in width, but not so on the web content overlay frame in my article. Vertical scrolling is working just fine but I'd like to have a narrower width for the form so that a user only scrolls vertically; instead of having to scroll left/right to read more information on the form.
I've tried editing the iFrame width in the code: inside the iframe element, adding a div wrapper, defining a table width... No adjustments in the html seem to be rendering correctly on iPad.
And I'm not a huge fan of the Web Content Overlay's option of Adjusting content to fit the frame since it makes the form very small.
I'm running on CS5.5; I haven't tested the direct embed into
Any help is greatly appreciated!

Try to paste the code directly into InDesign. Sometimes it creates better results than just using a web overlay. I'm also dealing with some similar problem trying to get SoundCloud into the document.

Web content reporting User information

HI Guys,
We have been using the web content reporting tool for a while now. We however want to have information about WHO logged on.
If I look into the databse I can see a hashed userid is logged. Has anyone allready tried to get this information into the reports? (
Does anyone has an idea to unhash this userid, or maybe better DO not hash it at all?
Thanks
Joachim

It seems I am blond. I somehow missed the parameters in the application descriptor. It now seems to be writing the logon id(unhashed) in te logonid field.
Hopefully it will appear in the standard reports.....

Suppression of nav bars (chrome) in web-content overlays

We've started to experiment with creating interactive content within folios, using web content overlays and HTML5/AJAX.
Problem is the nav bars/chrome (whatever you want to call them) in Adobe Viewer pop up constantly, and unpredictably - for instance, the chrome will appear the *first* time an HTML button is clicked, but not on subsequent occasions. For other <div> elements that have onclick handlers attached, the nav always seems to appear.
Does anyone have any insight into possible ways of suppressing the nav bars completely for web-content user interaction? Judging by the behaviour of HTML buttons, it seems there has been some effort put into this on Adobe's part, but some concrete insight would be brilliant.
Cheers,
David (Boto Media).

I have already come across these "solutions".
I am on v27 and have been since its release.
I have tried method number one. It partially works however it is buggy. When the overlay initially loads, it flashes the Twitter URL before showing the feed in the overlay frame on the article. Additionally, it sometimes flashes back and forth from the Twitter Feed's URL and displaying the feed itself. This, for me is not a wholly valid solution but it will do for now since the only thing that remotely works. I suspect the URL flash has alot to do with the network connectivity of the device one is viewing the feed on. However, to flash that URL before the feed loads makes the overlay appear buggy.
And the second method most definitely crashes ID ever single time I attempt to preview the overlay either on desktop or iPad. And I have tried this method on several different machines, thinking it was my copy of ID. It still crashes upon preview, so mehtod two is not a valid solution at all, unless there is something special that needs to be in the HTML file (besides the twitter widget) for it to not crash ID, that I am unaware of.
Thank you for your assistance.

Web content overlay doesn't always open in the in-app browser

We are using a web content overlay in a small frame to show a series of social media share buttons. It works beautifully most of the time - when the user taps the img, the in-app browser slides up from the bottom and the share page is ready to go. Sometimes though, for no apparent reason, the share page loads inside our tiny 200x50px frame. Here's a simplified sample of the code from our index.html file that we link to:
<div> <a href="http://www.sharesitegoeshere.com/facebook" target="_blank"><img src="facebook.png" alt="Facebook" width="40" height="40" border="0" /></a></div>
<div> <a href="http://www.sharesitegoeshere.com/twitter" target="_blank"><img src="facebook.png" alt="Facebook" width="40" height="40" border="0" /></a></div>
<div> <a href="http://www.sharesitegoeshere.com/pinterest" target="_blank"><img src="facebook.png" alt="Facebook" width="40" height="40" border="0" /></a></div>
<div> <a href="mailto:?subject=Check%20out%20this%20story%20&body=%0A%0Ahttp%3A%2F%2Fsharesitegoes here.com" target="_blank"><img src="email.png" alt="Email" /></a></div>
Here's some examples of the web overlay opening inside the small frame instead of the browser:
It seems like the first time we try the share button from a new article, it loads in the frame instead of the in-app browser, but every time after it behaves correctly. Is there any way to prevent this?

I've had this problem too. Here's a solution from my notes:
<UL><LI>Note on moving items
<P>Sometimes the blue "move up" arrow
disappears or stops working (as
expected). The reason is usually that
the regions "Group By" and "Sort By"
to properties have been set so that the order of items
is either completely determined or the
items you wish to rearrange belong in
different groups (or so as expose a bug
in Portal -- I still think this might be
a possibility).</P>
This sorting is set under the specific
Folder Style. Check
<DL><DD><pre>
Folder Properties
-> Folder Style tab
-> Layout tab
-> Edit region icon.
</pre></DD></DL>
Try setting "Group By" to "Category" or
"Author", and "Sort By" to
"Default".</P>
</LI></UL>
-Kal
null

Web Content moved into KM?

Similar Messages

Maybe you are looking for