Web Dynpro ABAP Component configuration - Invalid access Key

Hi Friends,
I have copied HRESS_CC_MENU_OVP to ZHRESS_CC_MENU_OVP and trying to configure it. Even after registering the object it is giving the same error Invalid access key.
We have registered HRESS_CC_MENU_AREA_GROUP and the access key worked fine. But registration for HRESS_CC_MENU_OVP is giving error Invalid access key. We have deleted and registered the object thrice but system is giving the same error.
Can someone please suggest me where I have gone wrong.
Thanks,
Ravi

Hi,
Each component will have different access key. you cannot use the same access key to different application.
You can try with different access key else you have an option of enhancing the HRESS_CC_MENU_OVP.
Regards,
Jyothi

Similar Messages

Closing web browser from a Web Dynpro (ABAP) component in it

Hi,
I am opening a Web Dynpro component in IE.
I have a requirement to close the Internet Explorer window on click of a "Close" Button in Web Dynpro (ABAP) component. I am using EXIT Outbound plug of the Main Window to perform the same.
In the EXIT plug I am setting "CLOSE_WINDOW" parameter to ABAP_TRUE.
On click of the "Close" button a pop-up dialog box (with "Yes" and "No" buttons) appears asking me whether I really want to close the IE window.
If I click on "Yes" button of the dialog box, the IE window gets closed without any issues.
But when I click on "No" button, the IE window shows up a blank screen. I want the control to come back to the calling Web Dynpro component's screen.
Appreciate any help/guidance in the above issue.
Thanks,
Prasanna

create an action 'YES','NO', 'CANCEL' in required view.
copy and paste below code in YES action
method ONACTIONYES .
data : l_view_cntr type ref to if_wd_view_controller,
l_win_cntr type ref to if_wd_window_controller,
l_window type ref to if_wd_window,
l_parameter_list type wdr_event_parameter_list,
l_parameter type wdr_event_parameter,
l_val type ref to data.
field-symbols <fs> type any.
l_view_cntr = wd_this->wd_get_api( ).
l_win_cntr = l_view_cntr->get_embedding_window_ctlr( ).
l_parameter-name = 'CLOSE_WINDOW'."'CLOSE_WINDOW'.
create data l_val type c.
assign l_val->* to <fs>.
<fs> = 'X'.
l_parameter-value = l_val.
insert l_parameter into table l_parameter_list.
l_win_cntr->if_wd_view_controller~fire_plug(
exporting plug_name = 'EXIT_PLUG'
parameters = l_parameter_list ).
endmethod.
goto your window
create plug EXIT in Window of type EXIT and chect interface checkbox
create a button - for example - "PUSH BUTTON"
in pushbutton action
copy and paste this code
method ONACTIONEXIT_PLG .
DATA: API TYPE REF TO IF_WD_COMPONENT,
      WINMAN TYPE REF TO IF_WD_WINDOW_MANAGER,
      WIN TYPE REF TO IF_WD_WINDOW,
      TEXT1 TYPE STRING_TABLE,
      ls_text type string,
      V_API TYPE REF TO IF_WD_VIEW_CONTROLLER.
API = WD_COMP_CONTROLLER->WD_GET_API( ).
WINMAN = API->GET_WINDOW_MANAGER( ).
LS_TEXT = 'Do You Want To Close the Window'.
INSERT LS_tEXT into table text1.
win = winman->create_popup_to_confirm(
                                       window_title = 'CONFIRM'
                                       text = text1
                                       button_kind = if_wd_window=>co_buttons_yesnocancel
                                       message_type = if_wd_window=>co_msg_type_question
                                       window_position = if_wd_window=>co_center ).
V_API = WD_THIS->WD_GET_API( ).
WIN->SUBSCRIBE_TO_BUTTON_EVENT(
        BUTTON = IF_WD_WINDOW=>CO_BUTTON_YES
        ACTION_NAME = 'YES'
        ACTION_VIEW = V_API
        IS_DEFAULT_BUTTON = ABAP_TRUE ).
WIN->SUBSCRIBE_TO_BUTTON_EVENT(
        BUTTON = IF_WD_WINDOW=>CO_BUTTON_NO
        ACTION_NAME = 'NO'
        ACTION_VIEW = V_API
        IS_DEFAULT_BUTTON = ABAP_FALSE ).
WIN->SUBSCRIBE_TO_BUTTON_EVENT(
        BUTTON = IF_WD_WINDOW=>CO_BUTTON_CANCEL
        ACTION_NAME = 'CANCEL'
        ACTION_VIEW = V_API
        IS_DEFAULT_BUTTON = ABAP_FALSE ).
WIN->OPEN( ).
endmethod.

Web Dynpro ABAP - Select Option and ALV Component Usage

Hi,
I'm new in ABAP Web Dynpro and i was trying to follow the SDN tutorial
Web Dynpro ABAP - Select Option and ALV Component Usage
In this video, we create a new Web Dynpro ABAP component that uses both Select Options and ALV. Developers can learn the basic mechanisms for working with both of these reusable components.
Following the link: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/39c54fe7-0b01-0010-0eb6-d63ac2bdd637
I implemented and generated the web dynpro with success but when i execute a test i get a dump on select-option definition.
Note
The following error text was processed in the system ECD : Exception condition "TYPE_NOT_FOUND" raised.
The error occurred on the application server ITAWSECCS01D_ECD_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: DESCRIBE_BY_NAME of program CL_ABAP_TYPEDESCR=============CP
I went in debug and the piece of code dumping is:
lt_range_table =
wd_this->m_handler->create_range_table( i_typename = 'S_PROJ' ).
Is there someone who can help me?
Thanks in advance,
Stefano.

Hi,
I'm new in ABAP Web Dynpro and i was trying to follow the SDN tutorial
Web Dynpro ABAP - Select Option and ALV Component Usage
In this video, we create a new Web Dynpro ABAP component that uses both Select Options and ALV. Developers can learn the basic mechanisms for working with both of these reusable components.
Following the link: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/39c54fe7-0b01-0010-0eb6-d63ac2bdd637
I implemented and generated the web dynpro with success but when i execute a test i get
an error as
Note
The following error text was processed in the system EI6 : Exception condition "TYPE_NOT_FOUND" raised.
The error occurred on the application server EC6IDES_EI6_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: DESCRIBE_BY_NAME of program CL_ABAP_TYPEDESCR=============CP
I have created a table zmy_table and trying to make USERID field as a select-options.I've written the code as shown below .
data: itab type standard table of zmy_table,
wa type zmy_table.
data:
node_employee type ref to if_wd_context_node,
elem_employee type ref to if_wd_context_element,
stru_employee type wd_this->element_employee ,
item_userid like stru_employee-userid.
navigate from <CONTEXT> to <EMPLOYEE> via lead selection
node_employee = wd_context->get_child_node( name = wd_this->wdctx_employee ).
@TODO handle not set lead selection
if ( node_employee is initial ).
endif.
get element via lead selection
elem_employee = node_employee->get_element( ).
@TODO handle not set lead selection
if ( elem_employee is initial ).
endif.
alternative access via index
Elem_Employee = Node_Employee->get_Element( Index = 1 ).
@TODO handle non existant child
if ( Elem_Employee is initial ).
endif.
get single attribute
elem_employee->get_attribute(
exporting
name = `USERID`
importing
value = item_userid ).
select *
from zmy_table
into table itab
where userid = item_userid.
node_employee = wd_context->get_child_node( 'EMPLOYEE' ).
node_employee->bind_elements( itab ).
Is there someone who can help me and can tell am i doing wrong?
Thanks in advance,
Dheeraj

Shooping cart creation in SRM 7.0 using web dynpro ABAP classes.

Hi,
We have recently upgraded to SRM 7.0 from SRM 4.0. We are using customized portal application for the creation of the shopping cart.I am planning to create custom FM which will use the standard Web dynpro ABAP classes to create the shopping cart.
Could you please guide with the classes that are need to be implemented and the sequence of the classes used in the shopping cart creation.
I think these are the classes that are used in the standard web dynpro ABAP component.
CL_FPM_EVENT ->                  Creates an instance of this class based on an event ID.
CL_BADI_FLT_DATA_TRANS_AND_DB -> Data Handling: Transport and Database.
CL_EXITHANDLER ->               Class for Ext. Services Within Framework of Exit Technique.
CL_EX_BBP_DOC_CHANGE_BADI ->     BAdI Class CL_EX_BBP_DOC_CHANGE_BADI.
CL_BBP_OBJECTS_ACCESS ->         Access Functions for Object Types.
/SAPSRM/CL_PDO_BO_SC ->          Shopping Cart BO.
Your expert comments will be appreciated...
Regards,
Naresh

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

SRM 7.0 Web Dynpro ABAP Customization

Hi ,
Upgrading from SRM 5.0 to SRM 7.0 and would require customization at the Web Dynpro ABAP Component for RFx.
I need to put a pop-up screen when the Buyer clicks on the "AWARD" button on the Bid Screen. Now I am not able to find the award action/event at the Web Dynpro component level where I have to put the pop-up code and other related logic. I also tried getting into the SPRO and find the class which may contain the AWARD event. Please let me know the solution to this problem. Thank you.
Manoj

Hi Akash,
Thanks for the reply. Can you please guide me through how to go about the enhancement, keeping the original functionality of the Award Button intact. And I understand coding in method of interface is not possible.
Manoj
Edited by: MANOJ NACHIMUTHU on Jul 12, 2011 6:33 PM
Edited by: MANOJ NACHIMUTHU on Jul 12, 2011 6:35 PM

Are there any standard web dynpro ABAP or JAVA for material creation(mm41)?

Hi SDN,
I have got the requirement to provide Web Dynpro application for material creation (transaction code is MM41) and I would prefer to enhance standard Web Dynpro more than develop from scratch. Now I got only the Web dynpro ABAP component for create sales order called "LO_OIF_MAIN_COMP" and GUI HTML for purchasing order that come with business package Eh4.
Anyone who know please kindly help me.

>but I afraid that I'm not able to find out what is its component name from application
You could just lookup the WD Application in SE80 and then it will show you the component name. From SE80 choose Edit Object from the toolbar. Go to the Web Objects tab in the dialog. Type in the WD Application name and hit enter. You will then see the details of that application.

Question about meta-data of Web Dynpro ABAP / Web Dynpro Java

Hello together,
everywhere I can read, that Web Dynpro meta-data is platform independent.
I´ve read into a book, that the meta-data of Web Dynpro Java is saved as XML and
that Web-Dynpro Java Runtime generates runnable classes and sourcecode out of this...
- What about Web-Dynpro ABAP? Is Meta-code in ABAP is saved in XML too?
- just for theory: is ist possible to take the meta-data of a Web-Dynpro ABAP component and
generate a Web-Dynpro Java Component out of this?
I tried to find it out but i failed... In table WDR_RR_LOAD (is this the right one?) I found only the
field data. But this is a RAWSTRING and I don´t know how to make I "readable".
I must know this for my thesis for my studies, not for work.
Thank you very much !!!!
Greetings,
Oliver

Me again,
I am not sure if I understood it right...
The meta-data which describes the visual part of a view is saved as XML and
would be rendered i.e. in the webbrowser... Right?
What about the meta-data of the Web Dynpro application?
Is this meta-code into an other structure or XML too?
Thank you very much.
Many Greetings,
Oliver

Access Key for Trial Version Web Dynpro ABAP 7.01 and 7.02

Hi Guys,
Can someone tell me, what is the Access Key for Trial Version Web Dynpro ABAP 7.01 and 7.02
Regards
Sankar

>
sankar.cgsl wrote:
> Hi Guys,
>
>
> Can someone tell me, what is the Access Key for Trial Version Web Dynpro ABAP 7.01 and 7.02
>
>
>
> Regards
> Sankar
HI Sankar,
I think it is not to get from this forum. You have to download the trail version and follow the instructions for installation.
Once you installed the software, you can request for the License key with your SCN credentials.
Follow this link for 7.02 Trial [/people/horst.keller/blog/2010/12/09/abap-trial-version-702-available-in-scn|/people/horst.keller/blog/2010/12/09/abap-trial-version-702-available-in-scn]

How to configure SSO for web dynpro ABAP (not web dynpro Java)

Hi Experts,
    I am testing SSO in IDES for web dynpro ABAP (Not for web dynpro Java / not for portal). When I am entering url of web dynpro application in web browser like internet explorer, then it should ask for user id and password first time, after login whenever user would access that url, it must not ask for user ID and password (url would be access web browser in mobile). For this I select to configure single sign-on for web dynpro ABAP. I have done below works:
1). I have created a web dynpro application having url: http://susws076.sap.swk:<port>/sap/bc/webdynpro/sap/zadb_hello_world2
2). I run TCode SICF and access service node to "Zadb_hello_world2". Double click on it, hit change. pressed "logon data" tab, select "Alternative logon
     procedure"
   Then deleted all logon procedure other than "SSO Authentication" and saved.
3). Go to "STRUST" and create certificate, choosed "Environment==> Logon Ticket" fill the required parameters and execute. It is OK (no red traffic
     signal).
4). Execute TCode "RZ10" to change profile parameter, insert new parameter (indicated by red arrow)
After all this settings I opened a browser enter above URL and hit enter but there is an error
There is no login page. It directly showed this error page. No cookies is saving.
Can anyone tell me what all the settings/configuration other than this I have to do. And is there any wrong setting done by me?
How to set the for single sign-on?
Thanks in Advance
Regards
Piyush

Hi Piyush,
Pls refer below links,
Single Sign On with ABAP WebDynpro
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/5e/6c85c3edf942f39349a1e337434d29/content.htm
Regards
K.N

Web dynpro abap application on Portal does not work via internet access.

Dear All,
I have created a web dynpro abap application and deployed the same on Portal.
The issue I am facing is that the webdynpro application works fine when the end user logs into Portal from Local Network,
However when the Portal is accessed from outside the local N/W via Internet, Portal is working fine for other applications like ESS
but the web dynpro application dont work.
Is this some configuration issue on the portal / abap development or any workaround is possible.
Regards
Abhinav Dagar

Hi
Please try to use the [HTTP Watch 5.0 Basic |http://www.httpwatch.com/download/] tool to trace that WD Application link from the portal and you can easily find out the problem.
Regards
Prakash T

About configuration web dynpro abap

we have ecc5.0 and we cant use web dynpro there. can anyone please tell me how can we use web dynpro there? is it related any sap license related issue? please help me about giving me some knowledge about web dynpro installation and use.
From web every user should need one sap id or one common id can be use for login through web.

>please help me about giving me some knowledge about web dynpro installation and use.
There simply is not option to install or configure Web Dynpro ABAP on ECC 5.0 or earlier. Web Dynpro ABAP is part of the SAP_BASIS Software Component. The versions of ECC 5.0 and earlier simply didn't contain Web Dynpro ABAP. It was new in ECC 6.0.
If you want to create Web Dynpro applications, consider building a standalone ABAP or Java Application Server as a separate instance. You can then do Web Dynpro ABAP or Java development on this standalone instance and make RFC and Web Service calls to your older ECC 5.0 system.

Component usage in web dynpro abap

Hi everyone,
I am basically SAP ABAP consultant and I am very new to SAP EP, can anybody please help me out what is Component usage in web dynpro abap?If anyone please can refer the process how to create Component usage it will be clearer to understand.
Thanks,
Sonali.

Hi,
Please go through below pdf document which will help in understanding the componenet usage in webdynpro ABAP.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2e71ce83-0b01-0010-11a4-98c28a33195f
Hope it will help you.
Raghu

Access web dynpro abap application from external portal.

Hi
How can a application made in ABAP be accessed from SAP External Portal.
Like a java web dynpro application could be easily accessed by making a webDynpro Java ivew in portal.
Is their any method to access a ABAP application similarly.
Thanks.

Thomas
Here is our scenario
We want to expose an ABAP webdynpro application using ABAP Webdynpro iView in portal to the internet. Does this scenario use the ITS http server / port like URL iview behind the scenes.
Can you please share more info on the above scenario.
Thanks in advance
Lakshmi

Error configuring the Web Dynpro ABAP

Hi,
I am configuring the web dynpro ABAP which is giving an error that is mentioned below when i try to logon to the system.
I have followed the note 1088717 for activating the services for Web Dynpro ABAP in SICF .
i have even followed the note 434918 for configuring the fully qualified host names for BSP.
Please let me know what might be the error.
Error when processing your request
What has happened?
The URL http://cgslsvr3:8020/sap/bc/webdynpro was not called due to an error.
Note
The following error text was processed in the system CGD : WebDynpro Exception: Application // Does Not Exist
The error occurred on the application server cgslsvr3_CGD_20 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CGD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server cgslsvr3_CGD_20 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server cgslsvr3_CGD_20 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 110 -u: BASIS -l: E -s: CGD -i: cgslsvr3_CGD_20 -w: 0 -d: 20080401 -t: 144740 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hi,
than you have to add in the hostfile at c/windows/system32/drivers/etc
your mapping with the ip address of the server, add a line like:
XXX.XXX.XXX.XXX servername
but it seems the server is found, so really check in sicf:
/default_host/sap/bc/webdynpro/namespace/application_name
this should be active as well
grtz,
Koen

How is Web-dynpro ABAP application is accessed in web.

Hi
How are pages in ABAP-Webdynpro rendered in web, how does they get converted in HTML.
As far as my understanding, ICM forwards the request to Application server ABAP, if request is for ABAP webdynpro page.
After that does ITS play a role to render these pages in Web ??

First of all ITS has absolutely nothing to do with Web Dynpro ABAP.
When you design a Web Dynpro ABAP application an XML based meta-data representation of the User Interface is saved in the repository. Then at runtime we have a Web Dynpro ABAP rendering engine (written completely in ABAP Classes) uses this meta-data to render corresponding HTML and JavaScript content that gets loaded into the HTTP Response object. We actually have multiple rendering engines for Web Dynpro (xBCML for Flash and the NWBC) as well as the ability to replace and upgrade these rendering engines over time without disrupting the applications. This is what is currently happening with 7.01 - we have rewritten the HTML/JavaScript renderer with a new version called LightSpeed.

Web Dynpro ABAP Component configuration - Invalid access Key

Similar Messages

Maybe you are looking for