Web dynpro admin
When I start the web dynpro admin it tells me that it failed to connect to the System Landscape Directory and the create Jco buttons are disable. What do I need to configure to makethe SLD available
You need to activate your SLD and maintain a entry in technical systems for concerned backend system.
when you are done with this, you will be able to see options to start SLD and create JCO.
Please follow following links for detailed help
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/783c00eabd1ad0e10000000a114cbd/frameset.htm">SAP Help on SLD</a>
Regards,
Similar Messages
-
No connection to SLD from Web Dynpro COntent Administrator
Hi guys!
I need to set up JCO connections to systems in Web Dynpro Admin, but I have no connection to SLD... What is needed to set up?
One more info: SLD has already imported CR content and is in status RUNNING..
Thanx a lot!
PeterHi,
Pls try the link below..
http://help.sap.com/saphelp_nw2004s/helpdata/en/11/0dfe55e0c8fc4e910706a47ca6859b/frameset.htm
Hope this helps.
Regards,
venkat.
[Reward points if useful] -
ABAP Web Dynpro: Application Configuration vs Admin Personalization problem
Hi,
I created an application configuration for the application MT_ORDER_APP with a component configuration on RPLM_MT_ORDER_COMP. I changed several Labels and UI Element visibility... and saved.
When I test this application config for viewing an order of type ZX99, I don't see my changes. If I right-click on the page, I see that the configuration Id used is MT_ORDER_ZX99.
Why my Z config is overrided by this one???
By testing in Admin mode, I discovered that I can personalize this MT_ORDER_ZX99 Config.... But then, the changes are visible to all users viewing ZX99 type orders.
How to manage to make my Application Config highest in priority?Hi,
how did you open in administrative mode?
to open in adminstrative mode do as follows:
In se80 ,i.e in the menu bar:
Web Dynpro Application->Test->Test in Administation mode.
i hope u can see the option "Settings for surrent config" .
you can refer the thread.
[Re: ABAP Web Dynpro Application changes in Administation mode]
Priya. -
SLD info not updated in Web Dynpro Content Admin of NW CE 7.1 EHP1
Hello Everyone,
I have installed the CE 7.1 on my PC and am having this problem. I have created the destinations SLD_DataSupplier and SLD_Guest in NWA and uploaded using SLD Data Supplier service. The Java WAS is now reflected in the SLD as a TS and a Datasupplier. I have also performed all the SLD Initilization and config. However the SLD is still not reflected in the Web Dynpro content admin. When I press the Check SLD Connection button all the values are blank.
Am I missing anything, Should I be doing any config in the Configtool? Any help is appreciated. Thanks in advance.
Satish.Hi Satish Varma Vegesna.
Check this link.
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09527da-39a7-2b10-9f99-c6a007e516a5]
Regards -
Web Dynpro SLD - No Visual Admin for CE 7.1
I used NWA to configure an SLD, able to ping, Collect and Send, etc. - all is good.
But when I go into Content Administrator for Web Dynpro the SLD is undefined. How do I set it if there's no VA?Never mind .... SLD_Client .....
-
Error While Deploying A Web Dynpro Appln thru NWDS
HI,
I am getting an error while deploying a Web Dynpro Application through NWDS.Following is the Exception
Aborted: development component '<ComponentName>'/'local'/'LOKAL'/'0.2006.07.26.15.06.05':Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [sapsbx28] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Cannot authenticate the user.] (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
When i give a request for deployment it asks for the SDM password. I enter a valid SDM pwd. If i enter a invalid SDM pwd i get some other exception. So the pwd SDM entered by me is correct.
can any one help me in solving this
regards
Nilesh TaunkHi Nilesh,
Try opening Visual Admin if your not able to login with username(administrator) and password. Problem with NWD2004s do the following steps.
C:\usr\sap\J2E\JC01\j2ee\configtool->configtool.bat->open it
1. Click on Secure store
2. Right you will find :
admin/password/J2E->retype your admin passowrd which you gave during installation=>SAVE properly
Restart the server and try login visual admin
Deploy now...Other wise see this thread same error solved:
Re: An Deploy Problem about Credentials.
Regards
Suresh -
SDM failed when deploying a Web Dynpro application
SDM failed when deploying a Web Dynpro application - I get the following error message:
Sep 19, 2006 2:25:34 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : eix-blade-011
SDM port : 50118
URL to deploy : file:/D:/DOCUME1/AMRM1.AZI/LOCALS1/Temp/temp43621sap.comwelcome.ear
Deployment exception : Server eix-blade-011 did not accept login request as admin on port 50118. Details: ERROR: Could not establish connection to server eix-blade-011 at port 50118: eix-blade-011
Inner exception was :
Server eix-blade-011 did not accept login request as admin on port 50118. Details: ERROR: Could not establish connection to server eix-blade-011 at port 50118: eix-blade-011Amr Azim,
You must have logged in thru a dedicated connection to any server through say VPN before deploying.This way the sdm uses the same login as that of already establised connection.
So 'sign of' all connections to any servers before deploying and redeploy your application.Here you will be prompted to supply the sdm password and deployment shall proceed. -
Got reading error when deploying a web Dynpro project
Hi everyone,
I'm working on NWDS 7.1 CE. After I synchronized a project (using the "Create Project" option), then Build and Deploy it under the Development Infrastructure perspective, I can run it by choosing the "Run" option of the web Dynpro project's application. But once I chose "Deploy new arcihve and run", I got the following error message:
[ERROR CODE DPL.DC.3095] A reading error occurred while loading the SDU 'D:/usr/sap/DW1/J00/j2ee/cluster/server0/temp/tcbldeploy_controller/archives/3888/dow.comgcacmpprofitcenterui.ear'.; nested exception is:
com.sap.engine.services.dc.util.readers.sdu_reader.SduReaderException: [ERROR CODE DPL.DC.3388]
The specified file D:/usr/sap/DW1/J00/j2ee/cluster/server0/temp/tc~bl~deploy_controller/archives/3888/dow.com~gca~cmp~profitcenter~ui.ear is not a valid SAP deployable unit. In case it is Java Enterprise application, please convert it to SAP compatible deloyable unit first.
Additional information: 'The information about the development component found in the manifest is either missing or incomplete!
Manifest attributes are missing or have badly formatted value:
attribute keylocation is missing
attribute keyname is missing
attribute keyvendor is missing
attribute keycounter is missing
Does anyone know what happens here? What's the difference of the Build/Deploy commands under Web Dynpro perspective and under Development Infrastructure perspective? After I made changes to the project, can I just deploy it under the Development Infrastructure perspective?
Thanks,
JamesHi Nilesh,
Try opening Visual Admin if your not able to login with username(administrator) and password. Problem with NWD2004s do the following steps.
C:\usr\sap\J2E\JC01\j2ee\configtool->configtool.bat->open it
1. Click on Secure store
2. Right you will find :
admin/password/J2E->retype your admin passowrd which you gave during installation=>SAVE properly
Restart the server and try login visual admin
Deploy now...Other wise see this thread same error solved:
Re: An Deploy Problem about Credentials.
Regards
Suresh -
Error Your browser/program is not supported by Web Dynpro
Hi,
1. I am getting error "Your browser/program is not supported by Web Dynpro" while executing Web dynpro java application
2. Portal is EP 7.0 with SP15
3. Browser is IE 8.0
4. Which browser(s) (& sp level) are supported by web dynpro?
5. Is it possible to customize this error message?
6. If so, from where (Web dynpro java application or Visual Admin)
7. My web dynpro application supports multiple languages.
8. Is it possible to maintain this message in messagecomponent.xlf file
Thanks & regards,
NileshHi Nilesh
IE8 and IE7 is not supported.
For browser/program is not supported by Web Dynpro----
check this forums link
/message/6416540#6416540 [original link is broken]
/message/2842083#2842083 [original link is broken]
Re: browser/program is not supported by Web Dynpro!
Hope this link information will help you
Regards
Ruturaj -
Cannot deploy web dynpro applications
Hello,
I'm starting to develop web dynpro applications, and I can run them on the nwds, but I cannot deploy them to the SDM, i always get the following error:
/userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[003]Deployment aborted
Settings
SDM host : myserver
SDM port : 50118
URL to deploy : file:.../Temp/temp53918Welcome.ear
Deployment exception : Server myserver did not accept login request as admin on port 50118. Details: ERROR: Could not establish connection to server myserver at port 50118: No route to host: connect
Inner exception was :
Server myserver did not accept login request as admin on port 50118. Details: ERROR: Could not establish connection to server myserver at port 50118: No route to host: connect
I have installed Sneak Preview SAP NetWeaver 2004S SR 1, i can access the enterprise portal with no problems.
I would be appreciate if anybody could help me with this issue.
Regards,
Leandro FonsecaAt the same time if more users are deploying then you may such 'deployment aborted' errors check if there are more child instances for the J2EE engine.If not ask your basis administrator to create more child nodes to balance the load on the server instance.Also You can find out the server details at
"http:
<hostname:portnum>\index.html"select system configuration-you can get the details of the SDM and the j2ee engine from there.You need to have proper credentials to get the information from the above url.
Provide those details in the NWDS. -
Delete a file from the KM in a Web Dynpro application
Hello,
We need to delete a file from the KM in a Web Dynpro application.
We have a file name (filename.txt) and its path (/documents/Test/), how can we completely delete the file from the KM?
Thanks,
GilHi venkata reddy,
You wrongly mentioned system admin instead of content admin
Go to Content administration not in the system administration
if u delete the file manually in the portal you can go with
go to Content administration -> KM Content -> go to Particular document -> just tick the check box which doc u want delete -> go to selection -> u will find delete .
Regards,
P.Manivannan -
Errors in While trying to Deopy Web Dynpro Application
Hi,
I have NetWeaver 2004S in My local System. I am facing one problem while deploying that Web Dynpro Application from NWDS. Error is pasted below. But i can deploy EP Application. I am facing the same problem when i tried to Deploy from Remote GUI.
Can anyone help me in fixing this problem.
Thanks,
Sridhar
<u>Exception i got while deploying.</u>
Starting Deployment of SampleWD
Aborted: development component 'SampleWD'/'local'/'LOKAL'/'0.2006.06.05.11.29.10':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [H1B-2F241-HMY] with user name: [Administrator] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Cannot authenticate the user.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment of SampleWD finished with Error (Duration 2473 ms)Hi Sridhar,
Please follow the steps below:
1. Open ConfigTool ( drive:\usr\sap\J2E (your instance)\JC01\j2ee\configtool
2. Go to Secure Store and change the password for the property admin/password/J2E (This password should same as the one you are trying to login to portal)
3. Click Add
4. Click Save and restart your server.
Should be able to deploy your components.
Happy deploying
Best Regards,
Shiva -
After applying SP21 the web dynpro is not working (WDTypeNotFoundException)
Hi
We have recently applied SP21 to our NW04 system.
The patch was successfully applied. But while accessing the Web Dynpro, we are getting WDTypeNotFoundException exception.
The Error Message is as follows :
+500 Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
Hide
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
500 Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
Hide
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDTypeNotFoundException: type jp.co.companyname.projectname.pp.fnp09.datapreparemodel.types.Ru_cnfind not found
at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:224)
at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:318)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.addAttribute(NodeInfo.java:517)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.addAttribute(NodeInfo.java:530)
at jp.co.companyname.projectname.pp.fnp09.main.RawMaterialView.wdDoModifyView(RawMaterialView.java:191)
... 28 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; .NET CLR 1.1.4322)
Version
DOM version
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, Build ID: 6.4021.00.0000.20070905102710.0000 (release=630_VAL_REL, buildtime=2007-09-19:20:40:15UTC, changelist=460812, host=PWDFM026)
J2EE Engine 6.40 patchlevel 109749.313
Java VM Java HotSpot(TM) Server VM, version:1.4.2_13-b06, vendor: Sun Microsystems Inc.
Operating system Windows 2003, version: 5.2, architecture: x86
Other
Session Locale ja
Time of Failure Mon May 17 18:35:52 JST 2007 (Java Time: 1197884152810)
Web Dynpro Code Generation Infos
companyname.co.jp/pp~fnp09
SapDictionaryGenerationCore 6.4010.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-12-09:22:23:41UTC, changelist=280522, host=PWDFM026.wdf.sap.corp) +
If you have any ideas please let me know.
thanks and Regards
Raghunahth LHi raghu,
You can go to Visual administrator (/usr/sap/<SID>/JCxx/j2ee/admin--go.bat)
Give administrator credentials..
Cluster-Server-Services-webdynpro Runtime.
See if it is stopped.You can see red croos,if it is stopped.If it is,
Right click on Webdynpro Runtine and start.
One more option,you can give a try is start all teh srvices manually through
telnet
This can be done with "run' command on you system
telnet <IP adress> telnet port
telnet port will be http port ending with 8.
then give administrtaor credentials.
then go with these commands,
jump 0
add deploy
list_app
start_app-all
Try looki in for detailed error messages in default trace and application logs.
Loc : /usr/sap/<SID>/JCxx/j2ee/cluster/server0/log
Regards
Usha -
The Web Dynpro Application 'WebUI' has expired,
Hi experts,
We are using Netweaver 7.01 portal , I have done some change to the portal for configuring idle timeout .
Now currently we are not using that in portal ,so i removed all the configurations
When i am using the all the other portal applications it is working fine, but when i am using webdynpro java applications it is giving the following error in a couple of mins (less then 5 mins)
The Web Dynpro Application 'WebUI' has expired. Restart the application using the Refresh button or via the following link WebUI.
Please let me know how to resolve this is issue .
Thanks & Regards,
Pavan MarlaHi,
Check this link and below settings
DefaultExpirationTime
=================
http://help.sap.com/saphelp_nw04s/helpdata/en/43/8a1a8ece230c8ce10000000a11466f/content.htm
Check the time for session timeout by the following steps:
1. Open the visual admin tool.
2. Navigate to Server -> Services -> Web Container -> Properties.
3. Check the value of the property 'SessionTimeout'.
Regards,
Nivas209
Edited by: Nivas209 on Feb 8, 2012 12:50 PM
Edited by: Nivas209 on Feb 8, 2012 12:51 PM
Edited by: Nivas209 on Feb 8, 2012 1:03 PM
Edited by: Nivas209 on Feb 8, 2012 1:06 PM -
How to execute a BI query/view from a web dynpro application?
Hi all,
I am trying to connect to a BI system from a Web Dynpro application. I have to execute a view/query and process the output in my application. Please guide me about how to establish the connection to the BI system from my web dynpro application and then execute the query/view.
I have tried executing/modelling the BI query/view using Visual Composer but I get an error saying 'QueryView Instantiation failed' when I try to drag the view/query on to the design board.
Please guide me and help me achieve this.
Thanks & Regards,
KishanHi Kishan,
Define system for BI in portal and define JCo destination, then from WDJ application use can query BI.
Create the Technical System and connect with JCO Destinations
or
Connecting through the BI Connecters (ex: XMLA Connecter)
Refer below link:-
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60f35908-ecd4-2910-6c89-e75e1054d9d1?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60f35908-ecd4-2910-6c89-e75e1054d9d1
In this document you will get details related to connector and other admin activity.
Hope this may help you.
Deepak!!!
Maybe you are looking for
-
W520 Dim panel suddenly going bright issue
When I boot my machine, the internal panel is so dim I cant work with it. Its the equiv. of about 11 on the lenovo brightness scale of 1-15. the brightness control FN-pg-up has no effect - its already at its brightest (it thinks). Fn-page down makes
-
Not responding 10.2.1.1
Ever since I updated to new itunes I have had tonnes of problems. 1) When trying to add music via add folder or file, Itunes freezes and stops responding. 2) When plugging phone in the USB is not recognised. 3) When attempting to sync my Iphone 4 Itu
-
This is really stumping me. Whenever I change the page size from the document setup, it always resizes from the center. Now, randomly, it will resize from somewhere besides center like bottom right or top left. The only way around this that I have fo
-
Using wliconsole's process instance monitoring and audit trail
Hello, I have couple of questions about wliconsole's process monitoring capabilities to be able to use in real production environments. 1. Is it possible to add some custom data to the Process Instance Summary table? For example, we would like to sho
-
Enable Safe Search in Group Policy
We ran across an issue where if a Student typed xxx in the Google Search and then click images, they are submitted to more than an eye full of inappropriate images. We have the "Safe Search" enabled on our Sonic Wall, but that still does not stop th