Web.show_document gives FRM-92020 error unknown protocol

Hi I am hoping someone can help.
I am using web.show_document in forms 10g and get an FRM-92020 unknown protocol error. The URL I am passing starts fddl:// this is a legitimate call to an Electronic Document management system image search engine. The URL works 100% outside of Forms, i.e cut and paste into an internet Explorer address bar. The problem is with web.show_document parsing for 'known' protocols.
Is there any way I can stop this validation from taking place. Incidentally I can HOST out and call iexplore with the URL and again that works (client Server), however we do not have webutil installed for me to do the webutil equivalent in our live environment!
Any help will be great, thanks in advance.
Trev.

Hi Francois,
thanks for replying.
Yes I am using '_blank' as the second parameter.
The URL I am passing is dynamically genreated and held in a variable. My call is:
web.show_document(l_url,'_blank');
the url evaluates to something like below:
l_url := 'fddl://fmhsqlserv/filedirector/...........................'
I am struggling to find any documentation on web.show_document that will help with this scenario. It is frustrating as the url is 100% OK, its just the evaluation of it by the function call.
Any help or ideas are welcome.
Trev

Similar Messages

Virtual Mail Setup - imapd-ssl error unknown protocol

Hi,
I have been relentlessly trying to setup my first email server and I think that I am almost there. I have been following the guide at:
https://wiki.archlinux.org/index.php/Simple_Virtual_User_Mail_System
I have followed it step by step and I'm 99% sure that I didn't miss a thing when setting it up.
However, I cannot login to my roundcube mail. It just times out.
This is the error that pops up in /var/log/mail.log:
mail imapd-ssl: couriertls: accept: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol
this is the contents of /etc/authlib/authmysqlrc:
##VERSION: $Id: authmysqlrc,v 1.20 2007/10/07 02:50:45 mrsam Exp $
# Copyright 2000-2007 Double Precision, Inc. See COPYING for
# distribution information.
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
# authmysqlrc created from authmysqlrc.dist by sysconftool
# DO NOT INSTALL THIS FILE with world read permissions. This file
# might contain the MySQL admin password!
# Each line in this file must follow the following format:
# field[spaces|tabs]value
# That is, the name of the field, followed by spaces or tabs, followed by
# field value. Trailing spaces are prohibited.
##NAME: LOCATION:0
# The server name, userid, and password used to log in.
MYSQL_SERVER localhost
MYSQL_USERNAME postfix_user
MYSQL_PASSWORD *******MY PASSWORD*******
##NAME: SSLINFO:0
# The SSL information.
# To use SSL-encrypted connections, define the following variables (available
# in MySQL 4.0, or higher):
# MYSQL_SSL_KEY /path/to/file
# MYSQL_SSL_CERT /path/to/file
# MYSQL_SSL_CACERT /path/to/file
# MYSQL_SSL_CAPATH /path/to/file
# MYSQL_SSL_CIPHERS ALL:!DES
##NAME: MYSQL_SOCKET:0
# MYSQL_SOCKET can be used with MySQL version 3.22 or later, it specifies the
# filesystem pipe used for the connection
# MYSQL_SOCKET /var/mysql/mysql.sock
##NAME: MYSQL_PORT:0
# MYSQL_PORT can be used with MySQL version 3.22 or later to specify a port to
# connect to.
MYSQL_PORT 3306
##NAME: MYSQL_OPT:0
# Leave MYSQL_OPT as 0, unless you know what you're doing.
MYSQL_OPT 0
##NAME: MYSQL_DATABASE:0
# The name of the MySQL database we will open:
MYSQL_DATABASE postfix_db
#NAME: MYSQL_CHARACTER_SET:0
# This is optional. MYSQL_CHARACTER_SET installs a character set. This option
# can be used with MySQL version 4.1 or later. MySQL supports 70+ collations
# for 30+ character sets. See MySQL documentations for more detalis.
# MYSQL_CHARACTER_SET latin1
##NAME: MYSQL_USER_TABLE:0
# The name of the table containing your user data. See README.authmysqlrc
# for the required fields in this table.
MYSQL_USER_TABLE mailbox
##NAME: MYSQL_CRYPT_PWFIELD:0
# Either MYSQL_CRYPT_PWFIELD or MYSQL_CLEAR_PWFIELD must be defined. Both
# are OK too. crypted passwords go into MYSQL_CRYPT_PWFIELD, cleartext
# passwords go into MYSQL_CLEAR_PWFIELD. Cleartext passwords allow
# CRAM-MD5 authentication to be implemented.
MYSQL_CRYPT_PWFIELD password
##NAME: MYSQL_CLEAR_PWFIELD:0
# MYSQL_CLEAR_PWFIELD clear
##NAME: MYSQL_DEFAULT_DOMAIN:0
# If DEFAULT_DOMAIN is defined, and someone tries to log in as 'user',
# we will look up 'user@DEFAULT_DOMAIN' instead.
# DEFAULT_DOMAIN example.com
##NAME: MYSQL_UID_FIELD:0
# Other fields in the mysql table:
# MYSQL_UID_FIELD - contains the numerical userid of the account
MYSQL_UID_FIELD 5000
##NAME: MYSQL_GID_FIELD:0
# Numerical groupid of the account
MYSQL_GID_FIELD 5000
##NAME: MYSQL_LOGIN_FIELD:0
# The login id, default is id. Basically the query is:
# SELECT MYSQL_UID_FIELD, MYSQL_GID_FIELD, ... WHERE id='loginid'
MYSQL_LOGIN_FIELD username
##NAME: MYSQL_HOME_FIELD:0
MYSQL_HOME_FIELD "/home/vmail"
##NAME: MYSQL_NAME_FIELD:0
# The user's name (optional)
MYSQL_NAME_FIELD name
##NAME: MYSQL_MAILDIR_FIELD:0
# This is an optional field, and can be used to specify an arbitrary
# location of the maildir for the account, which normally defaults to
# $HOME/Maildir (where $HOME is read from MYSQL_HOME_FIELD).
# You still need to provide a MYSQL_HOME_FIELD, even if you uncomment this
# out.
MYSQL_MAILDIR_FIELD maildir
##NAME: MYSQL_DEFAULTDELIVERY:0
# Courier mail server only: optional field specifies custom mail delivery
# instructions for this account (if defined) -- essentially overrides
# DEFAULTDELIVERY from ${sysconfdir}/courierd
# MYSQL_DEFAULTDELIVERY defaultdelivery
##NAME: MYSQL_QUOTA_FIELD:0
# Define MYSQL_QUOTA_FIELD to be the name of the field that can optionally
# specify a maildir quota. See README.maildirquota for more information
MYSQL_QUOTA_FIELD quota
##NAME: MYSQL_AUXOPTIONS:0
# Auxiliary options. The MYSQL_AUXOPTIONS field should be a char field that
# contains a single string consisting of comma-separated "ATTRIBUTE=NAME"
# pairs. These names are additional attributes that define various per-account
# "options", as given in INSTALL's description of the "Account OPTIONS"
# setting.
# MYSQL_AUXOPTIONS_FIELD auxoptions
# You might want to try something like this, if you'd like to use a bunch
# of individual fields, instead of a single text blob:
# MYSQL_AUXOPTIONS_FIELD CONCAT("disableimap=",disableimap,",disablepop3=",disablepop3,",disablewebmail=",disablewebmail,",sharedgroup=",sharedgroup)
# This will let you define fields called "disableimap", etc, with the end result
# being something that the OPTIONS parser understands.
##NAME: MYSQL_WHERE_CLAUSE:0
# This is optional, MYSQL_WHERE_CLAUSE can be basically set to an arbitrary
# fixed string that is appended to the WHERE clause of our query
# MYSQL_WHERE_CLAUSE server='mailhost.example.com'
##NAME: MYSQL_SELECT_CLAUSE:0
# (EXPERIMENTAL)
# This is optional, MYSQL_SELECT_CLAUSE can be set when you have a database,
# which is structuraly different from proposed. The fixed string will
# be used to do a SELECT operation on database, which should return fields
# in order specified bellow:
# username, cryptpw, clearpw, uid, gid, home, maildir, quota, fullname, options
# The username field should include the domain (see example below).
# Enabling this option causes ignorance of any other field-related
# options, excluding default domain.
# There are two variables, which you can use. Substitution will be made
# for them, so you can put entered username (local part) and domain name
# in the right place of your query. These variables are:
# $(local_part), $(domain), $(service)
# If a $(domain) is empty (not given by the remote user) the default domain
# name is used in its place.
# $(service) will expand out to the service being authenticated: imap, imaps,
# pop3 or pop3s. Courier mail server only: service will also expand out to
# "courier", when searching for local mail account's location. In this case,
# if the "maildir" field is not empty it will be used in place of
# DEFAULTDELIVERY. Courier mail server will also use esmtp when doing
# authenticated ESMTP.
# This example is a little bit modified adaptation of vmail-sql
# database scheme:
# MYSQL_SELECT_CLAUSE SELECT CONCAT(popbox.local_part, '@', popbox.domain_name), \
# CONCAT('{MD5}', popbox.password_hash), \
# popbox.clearpw, \
# domain.uid, \
# domain.gid, \
# CONCAT(domain.path, '/', popbox.mbox_name), \
# domain.quota, \
# CONCAT("disableimap=",disableimap,",disablepop3=", \
# disablepop3,",disablewebmail=",disablewebmail, \
# ",sharedgroup=",sharedgroup) \
# FROM popbox, domain \
# WHERE popbox.local_part = '$(local_part)' \
# AND popbox.domain_name = '$(domain)' \
# AND popbox.domain_name = domain.domain_name
##NAME: MYSQL_ENUMERATE_CLAUSE:1
# {EXPERIMENTAL}
# Optional custom SQL query used to enumerate accounts for authenumerate,
# in order to compile a list of accounts for shared folders. The query
# should return the following fields: name, uid, gid, homedir, maildir, options
# Example:
# MYSQL_ENUMERATE_CLAUSE SELECT CONCAT(popbox.local_part, '@', popbox.domain_name), \
# domain.uid, \
# domain.gid, \
# CONCAT(domain.path, '/', popbox.mbox_name), \
# CONCAT('sharedgroup=', sharedgroup) \
# FROM popbox, domain \
# WHERE popbox.local_part = '$(local_part)' \
# AND popbox.domain_name = '$(domain)' \
# AND popbox.domain_name = domain.domain_name
##NAME: MYSQL_CHPASS_CLAUSE:0
# (EXPERIMENTAL)
# This is optional, MYSQL_CHPASS_CLAUSE can be set when you have a database,
# which is structuraly different from proposed. The fixed string will
# be used to do an UPDATE operation on database. In other words, it is
# used, when changing password.
# There are four variables, which you can use. Substitution will be made
# for them, so you can put entered username (local part) and domain name
# in the right place of your query. There variables are:
# $(local_part) , $(domain) , $(newpass) , $(newpass_crypt)
# If a $(domain) is empty (not given by the remote user) the default domain
# name is used in its place.
# $(newpass) contains plain password
# $(newpass_crypt) contains its crypted form
# MYSQL_CHPASS_CLAUSE UPDATE popbox \
# SET clearpw='$(newpass)', \
# password_hash='$(newpass_crypt)' \
# WHERE local_part='$(local_part)' \
# AND domain_name='$(domain)'
I have been reading around about that error to no avail.
i have extension=openssl.so uncommented in /etc/php/php.ini and round cube says my openssl is fine.
Any help would be much appreciated!
kush
Last edited by kush (2012-01-05 16:49:18)

Hey Kush I am having the same issue, did you ever get it working???

Java error: unknown protocol: socket

Did a full-system upgrade over Yaourt and it updated ~100 packages, and now my Java is semi-broken.
After the upgrade, I tried launching a usual .jnlp file that has worked flawlessly in the past, and now I get:
java.net.MalformedURLException: unknown protocol: socket
I have tried completely removing JDK and JRE and reinstalling them, and the error still shows up. Any ideas?

Fixed
Last edited by corruptz0r (2011-07-06 02:32:39)

Firefox gives me an error (SSL protocol has been disabled) when every I go to a site that requires a user name/password; how do I fix it

Everytime I try to log on to any website that requires a username & password, I receive the following error: SSL protocol has been disabled. I have tried all of the suggested solutions to this issue - but to no avail. I cannot log on to yahoomail. gmail, hotmail, ebay, paypal, or any other site that requires a user name and pass word. Internet Explorer works just fine - and again I have tried all the solutions suggested on the firefox support forum - but none have worked
== URL of affected sites ==
http://www.yahoo.com
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.5; InfoPath.2; .NET CLR 1.1.4322)

Check your settings on Tools > Options > Advanced > Encryption; see: http://support.mozilla.com/en-US/kb/Options+window+-+Advanced+panel#Encryption_tab

WEB.XML gives me an error while deploying a Web Application in Weblogic 5.1

I have a Web.xml which I copied the one from their documentation and edited for my servlet specific data. When I try to deploy it I am getting the following error.
 Wed Nov 15 17:10:37 EST 2000:<E> <HTTP> Error reading Web application 'C:/tomcat
 /webapps/La/'
 java.net.UnknownHostException: java.sun.com
 Can you throw some light on this? I have included the first three lines from the WEB,XML file where weblogic is choking.
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE web-app PUBLIC '-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN'
 'http://java.sun.com/j2ee/dtds/webapp_2_2.dtd'>
 Thank You
 Trisula P. Siripurapu


 Hi Jacek,
 Thank you for your suggestion. I changed the Web App version to 1.2 instead of 2.2. It worked. Thanks once again for the timely response. I really do appreciate it.
 Trisula Pani Siripurapu.
 Jacek Laskowski <[email protected]> wrote:
 >"Trisula P. Siripurapu" wrote:
 >>
 >> I have a Web.xml which I copied the one from their documentation and edited for my servlet specific data. When I try to deploy it I am getting the following error.
 >> Wed Nov 15 17:10:37 EST 2000:<E> <HTTP> Error reading Web application 'C:/tomcat
 >> /webapps/La/'
 >> java.net.UnknownHostException: java.sun.com
 >
 >I remember having the same problem before I added the latest service
 >pack (SP 6). If you don't want to download it, just change DOCTYPE to
 >
 ><!DOCTYPE web-app PUBLIC '-//Sun Microsystems, Inc.//DTD Web Application
 >1.2//EN' 'http://java.sun.com/j2ee/dtds/webapp_2_2.dtd'>
 >
 >and it should work. Notice the change of Web Application version - 1.2
 >rather then 2.2. I'm (almost) sure, I saw one example - examples/webapp
 >(?) - with this header. Take a look at the accompanying examples.
 >
 >When you apply SP6, things should work as they suppose to.
 >
 >> Trisula P. Siripurapu
 >
 >Jacek Laskowski

Non DB item in a base table block, gives frm-40202 error.

Dear All,
We are using forms6i as a front end. To simulate the error, consider the following example.
1.Create a multirecord emp block.
2.Add a non database item in the base table block.
3.Assign any value to the non database item, in the when new record instance trigger.
4.When i say F7 or F8, my block asking me like, field must be entered. Which means, my record status changed to Insert. But there is no change in base table record, since i modified only in the non base table item.
Please validate, whether i am doing anything wrong in my technique.
Regards,
Balaji

If you have a value to be used as the default value then you can use "Initial Value" property in the item level for the Non Database Item. If you do this it wont give you any problem during the query. If you create a new record then the value which you have put as the default will come automatically.

What I can do if when I'm restoring my iphone gives me this error: unknown error (3)

My iphone loses contact with the mobile operator so I decide to restore it, when the restoration is in the middle gives me the following error: desconcido error (3)

Hi molcarl,
If you are having issues restoring your iPhone, you may find the following articles helpful:
Apple Support: Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Apple Support: Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Regards,
- Brenden

Scheduled For Webi report gives Level Expected error

All,
I have been digging though the CMC trying to track down why some user IDs in a group throw this error when scheduling a report the group..and others do not.
The report fails almost immediately on execution for their IDs. Its more than 1.
If they have never logged into the BI platform (and therefore have no LDAP-->SAP alias) would it fail this way?
I am sending a PDF via email.
A couple of the users in this group are avid users of the platform and still get this error.
I know its not descriptive, but it is all that is present in the history associated with the failed instance.
It must be something with security, but I have yet to figure out why some in the group work and some do not.
thanks for any pointers here.
jim

Well after digging around, I found a missing role assignment on the BW side. Once corrected, IDs work fine. And I will note that the user does not need LDAP----> SAP aliasing.
The users I have adjusted so far have never been on our system and therefore do not have the aliasing setup yet.
Report runs fine.
Wish the error messages were a little more forth coming with what is going on..

Frm-92101 error during next record

hi ........
when i execute query and move to second record then it gives frm-92101 error.
please give the solution ..
in log file following information
07/02/04 16:51:48 forms90web: Forms session <17> aborted: unable to communicate with runtime process.
07/02/04 16:51:48 forms90web: Forms session <17> exception stack trace:
java.net.SocketException: Connection reset
 at java.net.SocketInputStream.read(SocketInputStream.java:168)
 at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
 at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
 at java.io.DataInputStream.readLine(DataInputStream.java:562)
 at oracle.forms.net.HTTPHeaderTool.parseResponseHeader(Unknown Source)
 at oracle.forms.servlet.ListenerServlet.forwardResponseFromRunform(Unknown Source)
 at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765)
 at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
 at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
 at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
 at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
 at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
 at java.lang.Thread.run(Thread.java:534)
plz reply

Try recompiling all the PL/SQL in the form by clicking on
Program, Compile PL/SQL, All.

WEB.SHOW_DOCUMENT , FRM-92020 Prevention

Hi, I have a forms module where the user can specify a URL and then press a button to launch it using the WEB.SHOW_DOCUMENT procedure. If the user doesn't enter a valid URL, they get a message something like:
"frm-92020 Invalid URL C:\temp\test.htm
sent to browser with target _top
Full Details: unkown proctocol: c "
Does anyone know what the complete list of valid protocols would be that WEB.SHOW_DOCUMENT accepts? I would like to write some code using this detail to ensure that the user cannot enter a value with an invalid protocol. Obviously http:, file: and ftp: will be the most common, but are there others that WEB.SHOW_DOCUMENT will allow?
Thanks,
Michael.

Hi,
its http:// , file:/// and javascript:
Frank

Unknown protocol: classpath when SOA server parses WSDL of ADF Web Services

We used ADF 11.1.1.4 to create synchronous web services (via Application Module Service Interface). Everything worked fine, we were able to created SOA composites that references those ADF web services and deploy them to SOA server successfully.
However, since last weekend, all SOA composites that reference the ADF web services started to give the following exception when loaded during SOA server startup:
[2012-01-17T14:27:35.373-05:00] [soa_server1] [ERROR] [SOA-20003] [oracle.integration.platform] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@39ed0f9] [userId: <anonymous>] [ecid: 0000JJh8SfNFg4aPXMg8xb1F5Sgf000001,0] [APP: soa-infra] Unable to register service.[[
oracle.fabric.common.FabricException: javax.wsdl.WSDLException: WSDLException: faultCode=INVALID_WSDL: Error reading import of oramds:/deployed-composites/default/MainOrch100000000002001Composite_rev1.0/SOAAMServiceRef.wsdl: javax.wsdl.WSDLException: WSDLException: faultCode=INVALID_WSDL: Error reading import of oramds:/apps/epm/fcc/service/SOAAMService.wsdl: javax.wsdl.WSDLException: WSDLException: faultCode=INVALID_WSDL: Invalid URL or file: classpath:/META-INF/wsdl/ServiceException.wsdl: java.net.MalformedURLException: unknown protocol: classpath: WSDLException: faultCode=INVALID_WSDL: Error reading import of oramds:/deployed-composites/default/MainOrch100000000002001Composite_rev1.0/SOAAMServiceRef.wsdl: javax.wsdl.WSDLException: WSDLException: faultCode=INVALID_WSDL: Error reading import of oramds:/apps/epm/fcc/service/SOAAMService.wsdl: javax.wsdl.WSDLException: WSDLException: faultCode=INVALID_WSDL: Invalid URL or file: classpath:/META-INF/wsdl/ServiceException.wsdl: java.net.MalformedURLException: unknown protocol: classpath
at oracle.fabric.composite.model.CompositeModel.loadImports(CompositeModel.java:379)
at oracle.fabric.composite.model.CompositeModel.getWSDLManager(CompositeModel.java:198)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.getDefinition(WebServiceEntryBindingComponent.java:240)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.load(WebServiceEntryBindingComponent.java:147)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.load(WebServiceEntryBindingComponent.java:98)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployServices(CompositeDeploymentConnection.java:161)
at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:92)
at oracle.integration.platform.blocks.deploy.CompositeDeployerImpl.deploy(CompositeDeployerImpl.java:149)
Caused by: javax.wsdl.WSDLException: WSDLException: faultCode=INVALID_WSDL: Error reading import of oramds:/apps/epm/fcc/service/SOAAMService.wsdl: javax.wsdl.WSDLException: WSDLException: faultCode=INVALID_WSDL: Invalid URL or file: classpath:/META-INF/wsdl/ServiceException.wsdl: java.net.MalformedURLException: unknown protocol: classpath
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.parseImport(WSDLReaderImpl.java:932)
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.parseDefinition(WSDLReaderImpl.java:808)
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:708)
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:656)
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:368)
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.parseImport(WSDLReaderImpl.java:911)
... 32 more
Caused by: javax.wsdl.WSDLException: WSDLException: faultCode=INVALID_WSDL: Invalid URL or file: classpath:/META-INF/wsdl/ServiceException.wsdl: java.net.MalformedURLException: unknown protocol: classpath
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.parseImport(WSDLReaderImpl.java:929)
... 37 more
Caused by: java.net.MalformedURLException: unknown protocol: classpath
at java.net.URL.<init>(URL.java:574)
at java.net.URL.<init>(URL.java:465)
at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.parseImport(WSDLReaderImpl.java:901)
... 37 more
Any suggestion about what might be causing this issue?
Thanks,
Fang

Just thought to put the solution here, in case anyone else that uses SOA encounter the same issue.
It turns out the setDomainEnv.cmd file for SOA server was corrupted, so that the list of PROTOCOL_HANDLERS are bad. It should have
set PROTOCOL_HANDLERS=%PROTOCOL_HANDLERS%;oracle.fabric.common.classloaderurl.handler;oracle.fabric.common.uddiurl.handler;oracle.bpm.io.fs.protocol
But something changed it to be only have oracle.mds.net.protocol, Therefore the classpath protocol could not be recognized by SOA server. Once we corrected the PROTOCOL_HANDLERS, this issue is gone.

Web-Disk on OSX 10.9 Give me this error: "Finder got an error: Network file permission error."

Previously I was using OSX 10.8 and Web Disk was working great.
Since I upgraded to OSX 10.9 Web Disk Dont Attach to my compputer and give me this ERROR:
FInder got an error: Network file permission error.
When I got this ERROR first time I searched GOOGLE and found this link: http://cammodude.blogspot.no/
And I did:
To force all connections to be SMB1:
Open A terminal window
paste in the following line followed by the return key(should be all on one line):
echo "[default]" >> ~/Library/Preferences/nsmb.conf; echo "smb_neg=smb1_only" >> ~/Library/Preferences/nsmb.conf
What the command does:
Creates a file called nsmb.conf in your home directory at the path ~/Library/Preferences/nsmb.conf.
Adds directives to force SMB connections to use the SMB1 protocol. This is slower but stable.
Then I could use Web Disk on OSX 10.9 after executing this command in Terminal.
But now I restarted my Macbook and now Im NOT able to connect to Web Disk and get the same ERROR.
FInder got an error: Network file permission error
After trying 100 times it attaches 1 time but then show this ERROR:
Can't get <<class cdis>> "my.server.com/2078" of application "Finder".
If this happen then I can see the files in Finder and see the Contents and Size of files but if I open a PHP file in BBEdit then it shows BLANK.. But actually it is NOT blank.
Now Im stuck How can I solve this? All help is highly appericated..
Thank you so much...

Hi,
Make sure to chmod the app, something like this :
chmod -Rf 777 secure_site_WebDisk.app
(in my case the CPanel provided the app for my OSx version.)

Web.show_document unknown software exception

I have this problem that occurs not in all machines. It occurs in machines with the MS Security patch that doesnt allow you to code javascript directly.
The problem I have is that when I use just plain vanilla web.show_document (URL,'_blank) I get the error
"the exception unknown software exception (0xe06d7363) occurred in the application at location 0x77e8f142"
This causes all the IE windows to close.
This happens only if the URL that I go to has some java applet that is used in the page. (It of course works if you just paste the same URL in a new IE window). A URL without any Java applet opens just fine.
Again this is only in machines with the MS Security patch.
I wonder if anyone has faced this problem at their end and if there is a workaround.
Thanks in advance
Sharat

Frank,
I too was convinced that the problem was with IE or Windows. After a lot of googling around I figured it out. Heres the solution for you guys out there if you ever hit upon the same problem.
Its not the MS Security patch related either.
I have a Java runtime environment installed on my machine (Sun JRE 1.5). This gets included in the IE Internet Options and is checked by default i.e
Use Sun JRE 1.5 for <applet>
This causes some conflict with the Microsoft VM causing the browser to crash. I unchecked the use Sun JRE 1.5 for <applet> and it works just fine now.
The funny thing is that it doesnt happen when you go to the URL directly. It happens only if you get there via web.show_document !!

I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?

I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?
I typed in the IPv6 address of the printer in the address feild of firefox.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

I'm trying to redeem an itunes card and it gives me an error message - an unknown error occurred (-1202) try again later. I've tried for several days now. What can I do?

I'm trying to redeem an itunes card and it gives me an error message - We could not complete your itunes store request. An unknown error occurred (-1202). Please try again later. I've tried several days now. Any idea what i need to do?

Chrisj4203, thank you for your kind answer.
I have done a lot of restores to the Iphone, and resets also.
I;ve done holding both buttons as you sugested, but there is no signal appearing.
I am in Uruguay, South America and the original company is Movistar ( Telefonica) and the new sim card is from ANTEL ( the officail and biggest company in my country).
I don;t knoe what todo.
I have been trying for more than one mont.
I have gone several times to both companies. Aldo two times to Apple uruguay, and nobody can help me.

Web.show_document gives FRM-92020 error unknown protocol

Similar Messages

Maybe you are looking for